Vacuum sealers Caso

[aleksandra]

aleksandra,

Teach, pliz, how to connect a caso gun with a hose tip.

Hello. Can you please tell if CASO TouchVAC has a double seam or a single seam? I will not find information anywhere ... (((

Hello. Can you please tell if CASO TouchVAC has a double seam or a single seam? I will not find information anywhere ... (((

One

Good afternoon hostess.
I have a sadness, I got my Wishlist, but he doesn't want to work.

On the idea of ​​†‹вЂ‹ buttons on both sides for fixing, but mine does not hold the lid
P.S. I figured it out, and I'll answer it myself.
You need to apply a force, press with good effort))

[Raduga0808]

You need to apply a force, press with good effort))

Raduga0808, and you try without force: palms on both sides, and press on one side until it clicks, and then immediately on the other until it clicks, everything should turn out easily and naturally. I myself suffered so much with my Zigmund, I even thought that the marriage was caught. And then I found an "explainer" in the internet about the alternate snapping, and everything became easy to close!

[Olga]

Olga, it is cheaper to buy Status rolls, they are more economical than bags.

There are several options for using smooth bags, I bought at Metro. They were originally intended for chamber vacuum equipment, from the pros:
1. Price - 266 rubles. for 100 pcs. 20x30
2. The density is much higher, hence the retention rate is very low
3. It is preferable to use for Su-vide than relatives, it has been verified by experience, relatives after 5-7 hours in Su-vide simply disperse along the seam.
Now a little about the sealing method.
Since the bags are smooth, it is difficult to get a vacuum in them, for this I use straws (straws) for a cocktail. In practice, the longer the straw, the easier it is to extract air from the bag, but it is not convenient if the product is wet, I cut the straw into four equal parts and use short ones. We insert the tube into the bag, the bag into the evacuator, click it, then as with our own bags.
There is a detailed video on YouTube.



YouTube search by request - vacuum sealer Caso vc 10

Link youtu .be / Hh-n8LbXnWo
You need to remove the space



If anyone is interested or needs more detailed instructions, write, I will help with advice and explain the nuances.

Alexander, the use of smooth bags - both with tubes and with other variants of dances with a tambourine is in this topic. It was discussed many times. Not to spite you, just information on how to do it, with instructions is already present here.

It didn't suit me, to be honest. It turned out to be easier and faster to use regular corrugated bags. And the volumes of vacuuming in our family are not the same, we have played enough and now we are vacuuming only what we really need.

Ok

Greetings to all!
I have a problem with the packer, the latch is broken, I have to hold the lid. The husband tried to take it to the service, they did not accept it. What should I do? Someone had the same problem, but I can't find it now. How did you solve this issue?

I have a problem with the packer, the latch is broken, I have to hold the lid. The husband tried to take it to the service, they did not accept it.

What service did you contact? I repaired mine on B. Cheremushkinskaya, I had to wait, but they did everything.

Once again, delighted with the successful purchase - CASO TouchVAC, decided to unsubscribe for the operation, the packer was about 1.5 years old, no problems, the mode of use from several times a day, up to a couple of times a week, sleeves with ozone status, packages from the metro, suvid constantly, I make the sausage myself - and during production and storage it helps, I even freeze broth in reserve in a meter bag)))

I am ripe for a vacuum cleaner. I read a little Temko and bought CASO VC 10.
Radogost83, Alexander, thanks for the straw method. Everything worked out. Indeed, it is more profitable to purchase smooth dense bags for Sous-vide, although I also bought Status rolls.
Here's my pumpkin from the freezer in sleek bags.

Promotion for a novelty.
We tested it in the office and liked it very much.
I recommend taking a closer look if someone was planning to buy.
In terms of functionality, it is similar to VC10, but more compact, cheaper, prettier.

Hello everyone! Girls with Caso 10, do you have a sealing problem? I read reviews that burns the seam in places
I think maybe it was a factory defect and has already been eliminated? Or are they all like that

[lira3003]

lira3003, I have Caso 10, I have been using it for 2 years (or 3?)), there has never been a case that it burned through or did not re-solder a seam, it always works normally. I'm happy with him.

[lira3003]

lira3003, I confirm word for word what Anastasia wrote.

[Anastasia]

Anastasia, Marina, girls, thank you very much for your answers! I ordered the last one in mvideo. Son said display case, I hope he's okay.

Bought a CASO FastVAC 500? the question arose - where can you buy normal containers for it? Found on sale only a set of native CASO VC BOX SET, but I need 3 pieces of the largest, not a set. Maybe someone will tell you where to get such containers one by one (not necessarily Caso, maybe other companies, if only with a valve for packers, and not for a hand pump)?

Thank you all for the advice))) I took another set of CASO VC BOX SET for 2400 rubles, because I could not find anything else in this form factor (I did not find Redmond ones on free sale, and they also only go in a set) ...

By the way, with regards to the CASO FastVAC 500 device itself - the device, as it is now customary among young people to say, is "just a bomb."
Pros, in comparison with the existing Redmond RVS-M021 and Solis Vac Prestige: 1) in the quality of sealing and double seam, the FV500 is significantly superior to them. The other day my wife and I were engaged in harvesting vegetables for the winter, unlike both competitors, FV500 absolutely no matter how much moisture passed into the collecting tray - it set the third "degree" of sealing and fries any moisture, and even with a double seam - in a couple of hours work and 3 rolls of different diameters of used bags, there was not a single poor-quality seam, the main thing is to look so that the bag does not jam when laying in place of the seam! In general, it is difficult for Redmond to solder juicy products, this must be done only manually and very accurately fall at the time when the moisture has just approached the sealing line, because if it gets further, the seam will not be sealed - there is not enough power and time for sealing. Solis has to manually cook two seams, because sometimes through some small pores that have not been soldered, in a couple of days the bags with wet products can "inflate", so out of habit after automatic vacuum and sealing, I manually a little higher I seal one more seam, which requires additional time, and if there is a lot of moisture, then there is also almost not enough time for sealing. 2) A very convenient handle for closing the device - you do not need to press with all your might with both hands on the edges of the lid, and then press the buttons with both hands to open the lid - just with one hand, with a slight movement, press the handle and the lid closes, lift it up - opens (the small son easily copes with this task, although he still lacks the strength to close neither Redmond nor Solis), his wife appreciated it very much. 3) there is a transparent window above the roll storage area and you can always immediately see which roll is installed, no need to lift the lid and look - a trifle, but nice. 4) 3 degrees of power adjustment and seam sealing time (in contrast to 2 for Solis). 5) The presence of the pickling mode (Solis also has, Redmond does not), I use it quite often. 6) Suction power - the pumping speed is higher, especially noticeable when vacuuming large containers.
Of the minuses of the FV500 - 1) and the most important is that the tray for collecting moisture is not removable (which did not allow the developer to think about it - it is not clear), although cheaper competitors have it - moisture got in, took out and rinsed under crane,but here you have to first get wet with a cloth, then wipe with a damp cloth, then wipe with a dry cloth - it's not convenient! 2) due to the double seam and slightly larger than both of the aforementioned competitors, the distance from the sealing point to the collecting tray and the vacuum chamber, the minimum "tail" of the package is about 1/3 or 1/4 more, which leads to less economical waste of rolls or space in bags, although this is not so critical. 3) The inscriptions under the buttons are only in German (for Solis - in English, for Redmond - in Russian), although the kit includes instructions in Russian - it's not difficult to figure it out, but at first you have to look closely and choose the one you need by elimination.
Something like this, if you have any questions - ask!

Hello everyone! I bought Caso 10, after Chinese with Ali, I really like it! Even my husband often asks to vacuum some things. My question is how to "marry" him with Wax caps? I read somewhere that I need either a hose or an adapter from Gucha I can't find ..
Or not to steam and use a pump from Wax for cans?

no need to press with all your strength with both hands on the edges of the lid, and then press the buttons with both hands,

Do not press with both hands at once. First you snap one edge, and then the second and everything will close easily.

[Rita]

Rita, the covers do not hold a vacuum for a long time. So you can pump up with a pump. If there are no containers, then you can do without the Gochi hose. I have it, but I rarely use it. There were plastic containers, but quickly deteriorated. I only use it for vacuuming under hoods.

[lira3003]

lira3003, Rita, a pump from Wax is the best solution. It holds for a long time and the liquid is not a hindrance. I'm afraid to solder damp products into the vacuum apparatus, but there is no hose, I have the same model.

[Marina]

There were plastic containers, but quickly deteriorated.

That's why I don't want them. Thank you, Marinathat confirmed my fears

a pump from Wax is the best solution. It keeps for a long time and the liquid is not a hindrance.

Catherine, Thank you! Then I will continue to use the pump.
By the way, the gasket at the pump has worn off, I don't even know where to look for a spare .. It's good that my husband uses it, he cut off the ring from the glove, straight from the finger and pulled it on. I really liked it, and it became easier to download it, faster

Hello! do you accept to your company? Today I bought a CASO FastVAC 500, ordered a set of 4 containers for ozone and a hose from Dom-upak. The tests will be carried out the day after tomorrow, since he himself is at work and the vacuum apparatus is nearby. most of all, salted tomatoes and cucumbers are of interest, and most importantly, the ripening of beef for steaks (there is a grill not entirely bad Tefal), for sous vide for the first time the multicooker Cuckoo. HELLO EVERYONE!!!

[Gennady]

Gennady, Hi! Don't forget to share (and show) the test results. And may this unit please you for a long time.

[Gennady]

Gennady, Congratulations! Let it serve long and well! Case is a great product!

THANK YOU!!! I can't stand waiting for two days, in the evening at work I'll go to the store, buy tomatoes and pickle and go home tomorrow evening with pickled tomatoes !!!



right at work


what was in the store, tomatoes, dill, salt, garlic, allspice. I still love carnation, but it wasn't.



And no one uses the program from CASO for the evacuator on a smartphone to track packaging, store food in the refrigerator?

I studied the whole topic and I want to order an assistant for myself, the budget is small, so I stopped at Caso 10 or Ellrona 22, they are now practically at the same price at Ozone. Confused by the marriage that comes across on the heating element, in the form of tubercles, I have not seen this about Ellrona. Help, on which one to stop.

[Irina]

Irina, I have an Ellrona 22:
Vacuum sealers Caso # 76
For more than four years of operation, there are no complaints.

The same as Galina, I can say about Caso 10

I'm torn as smart and beautiful, I want Ellrona more, but Caso is attracted by the opportunity to use containers that she would like to use for storing greens in the refrigerator, and maybe pickling meat.

Hello! Perhaps not in this forum I give a link. If something goes wrong, transfer it. there are many videos one after another technology about the SU-view technology.

Hello! Please tell me who knows. Chicken breast with broth, rolled in a blender. That is, it is the substance of a very thick soup.Can it be evacuated into bags? And which evacuator is suitable? Does CASO 10 or 11 have a function for vacuuming liquid products? I just can't find the information. It is not written anywhere, neither in the instructions, nor in the reviews.

[UKA]

UKA, 11 have. I play for a couple of days. There is a Dry / Wet button.

madina71 Tell me please, does he just have a seal without vacuum? And is there a choice of pressure for hard and fragile products?

[UKA]

UKA, There is a separate seal. But the choice of pressure on products only in manual mode. There are only three buttons: Sealing, Dry / Wet and the third Vacuum + Sealing. All. There are no instructions in Russian, I downloaded mvideo on the site.

Thank you very much for your answers! I bought Caso 11. And then I can't do anything. It turned out to be vacuumized from the 10th time. I seem to be doing everything according to the instructions, I can't understand what's the matter. It turned out to be vacuumized only when I hung the bag from the table. When he was lying on the table, he did not suck the air at all. And that seems to me not very good. Is this how it should be or am I married? The instructions do not say anything about the position of the package.

It should not be. Are you satisfied with this answer? This answer will probably not suit you. and there is nothing more to answer, because you did not indicate which bags you used, which product was evacuated, etc.

UKA, yes, the instruction is stupid, some stupid photos. I put the edge of the bag so that it falls beyond the middle of the liquid compartment. Or whatever it is called. I did not succeed right away, but when it came, I evacuated perfectly
I took a photo, now I will try to insert

It should not be. Are you satisfied with this answer? This answer will probably not suit you. and there is nothing more to answer, because you did not indicate which bags you used, which product was evacuated, etc.

Oh my God. Why be rude? How did I know what I had to write. I just bought it, I started doing it for the first time. I have no idea of ​​all these subtleties.

UKA, yes, the instruction is stupid, some stupid photos. I put the edge of the bag so that it falls beyond the middle of the liquid compartment. Or whatever it is called. I did not succeed right away, but when it came, I vacuumed perfectly
I took a photo, now I will try to insert

Ah, here's the thing. Got it. I'll try further. Otherwise, I put it on the edge of the black seal. The figure generally shows that the bag is being put, as it were, under this seal on the edge. Yes, it is also written so that the package does not fall on the seal. As always, the instruction was translated by a poor student. Thank you so much!

I apologize for the delay, I couldn't insert a photo right from the phone, I had to go to the computer. Hope you can see

I apologize for the delay, I couldn't insert a photo right from the phone, I had to go to the computer. Hope you can see

Thank you very much, low bow !!! I understood everything, today I will try it.

UKA, I was not rude to you, do not cheat. I just wanted to convey to you that the more detailed you tell about your problem, the sooner they will help you. Smile, and I apologize.

Madina, good day again! And thanks again for your help! It worked, but still from the tenth time. Now he didn't want me to stubbornly seal the bag. I already thought everything, tomorrow to carry to the store. But then he suddenly started. I didn't even understand what I did, what he started. I'll watch a couple more days. I vacuumed frozen minced meat. More precisely, the boiled chicken, turned with a blender, was frozen in a muffin mold and I wanted to solder these 4 pieces of cubes into bags. STATUS packages are universal width 280. The reviews are good. I also tried those that were included. The result was one, not soldered. So it's not about packages. Although the ones included are much narrower. In general, I don’t know, I don’t want to go to the store. Hope it's me, not marriage.

UKA, was the lid well closed? Was there a click on both the left and right?
Lower the edge of the bag straight into the middle of the vacuum chamber (into the recess) and snap into place.

Greetings! Recently I became the owner of CASO SV 900 and CASO FastVAC 500.I decided to vacuum 5 whole eggs on the machine, and then boil them in Su form. And I was very surprised by the power of the vacuum unit - the eggs crushed against each other, of course not to the end, but still.

I recommend CASO FastVAC 500, excellent device. But it is surprising that the container for collecting liquid is not removable.

I'm torn as smart and beautiful, I want Ellrona more, but Caso is attracted by the opportunity to use containers that she would like to use for storing greens in the refrigerator, and maybe marinating meat.

Does Kazo have an adapter included? It's just that Elron will vacuum everything through an adapter - both containers, and the roof and Wax. We bought adapters a few years ago on the forum, the top of Korean goods was attached.

Bought caso vc100 and jars from foodsaver. the hose fits and the jars are not closed? Before that, there was caso vc10 and everything worked. When I work with jars, do I need to close the vacuumizer until it clicks or not? Although I tried this and that. When it clicks down after a couple of seconds before clicking, and when not, it takes a minute, and the can is not vacuumized. Can someone help with advice?