Multicooker Panasonic SR-TMZ550 and SR-TMZ540

Hmm, I didn't have time, for the conclusion you need to go with the box, they will seal it.

Good day. Please tell me what to do. I started to blow off steam from the side. where to go? bought in December in m-video in Moscow. issue 0914

[Nataliya]

Nataliya, you need to contact the Panasonic service center (the address is indicated in the guarantee, or you can look at the Panasonic website).

and what should they say?

Every now and then, it lets steam through the lid.

Hmm, I didn't have time, for the conclusion you need to go with the box, they will seal it.

Sergei, who is being sealed? A box? This is the second time we have taken the conclusion. This is never required. They brought it home, folded up all the equipment and sent it to the store. By the way, next week I'm expecting my beauty.
And what is that casserole on your plate? Nice color - melted.

Now I don’t know what to do, whether on purpose to drive it in steam mode? what would the marriage be manifested?

Natasha, steam the vegetables or turn on self-cleaning. Then you can open the lid and see if there is any condensation inside the lid that goes beyond the rubber band. I started with this.

Sergei, who is being sealed? A box? This is the second time we have taken the conclusion. This is never required.

I had either 530 or 550, I brought a box to the service, checked the completeness and sealed it with sealed pieces of paper and accompanied me to the store with a message "do not wet, do not rip." And with the casserole, an incident occurred, I did it on Saturday evening, more likely even at night (and we had it very rich and heavy), a recipe from a book, put in a bucket, they left me on duty, everyone was asleep and I passed out a little, at the moment I was half asleep - yours ..., I have a cartoon, in general, it did not stand on heating for 15 minutes, but 85, as they say "there would be no happiness but sleep helped", it turned out very tasty.

Sergey, probably every SC has its own "cockroaches" in the head. The houses themselves were completed. She should arrive at the store today. I'm expecting a new one the other day.
And the casserole really looks very appetizing. Why bake something at night? And if it were not a cartoon, but an oven? Would the fire wake up?

The most critical resource is time, and the oven only works during the day. Well, that's how it happened, I didn't want to

A new multicooker came to me. While standing is heated. Sergey, I will surprise you. Saucepan 145mm. We measured it with a barbell. The entire repair-exchange took 19 days.

Irina, what's the difference? or visually nothing and what is the production date?

Sergey, I will surprise you

So you need to change the battery in the barbell and measure it, and only then be surprised.

So you need to change the battery in the barbell and measure it, and only then be surprised.

And what barbells come with batteries? My husband is Soviet, I don't even know how to use it.

Irina, what's the difference? or visually nothing and what is the production date?

No different. Release date September 2014.
Yesterday I turned on self-cleaning, I thought I would fall asleep with this mode near the multi, like Sergey The mode lasted for 48 minutes, of which water was boiled for 28 minutes. Steam only went through the valve. There was no condensation in the lid outside the sealing gum. But of course I don't see any sense in this mode. It's not a cuckoo pressure cooker valve that can get clogged.

, honestly, I'll come and take a picture of the barbell. And I took a nap next to the multi, but on the couch

Girls and boys, I have a question. Has anyone removed the protective film from the control panel? The instructions say that it is. I can’t find how and where to hook to remove.I put the multicooker on the windowsill and accidentally found a floating air bubble on the display in daylight. When stroking with a finger, it moves.

[Irin]

Irin, I did not shoot the film and did not even look for it. If the bubble is embarrassing, you can pierce it with a needle and release the air or expel it to the edge.

Not driven to the edge. What if it's not a film, but I'll make a hole right in the display? Here they will disguise so disguise. I used it for a year, then I found out that there was a film. I barely found how to remove it.

I saw the film on the round panas current in 2 years, when it suddenly began to peel off.

Has anyone removed the protective film from the control panel?

but still no one will surpass me, it is not removed on HP 255

and I will make a hole directly in the display?

The display is as simple as a film, you cannot pierce it.

I will repeat here: So ours began to float. It did not come to the deformation of the lid - in time I found a puddle on the left. They used it extremely rarely and carefully.

Good afternoon.

After six months, my bowl went bubble coating ...

Who has the same marriage and how was it changed in the SC and how long?

The support first accused me of washing it with something toxic and picking out the burnt one with a chisel, it's funny of course, but nothing ever burned and the faeries are clearly not acid, then they said drag it to the SC for examination.
🔗

Prompt compatible bowls - I saw that they fit from under the redmond - poke your finger ...

Alexander, the girls were experimenting. Bowls from Redmond 150 are suitable. The only thing is not known whether the Daikin bowl with a Greek pattern fits, perhaps it will not work "along the waist". I bought a stainless steel, it fits, but a little higher than the original one, but the lid closes, steam passes a little on intensive mode.

Thanks to the girls for their help! )
It so happened that now this is my only device for preparing food - how will I get a bowl I will contact the SC.

I also saw that the bowl was floating, before the description of the bug on the forum I did not even think to look at it, there is also a dent on the lid (it soars in another place), but somehow I still bought it via the Internet and did not want to bother with the return ...
in the guarantee - ??? (half a year has passed)
that's what I usually cook)

A bowl with a Greek pattern does not fit. Checked.

A bowl with a Greek pattern does not fit. Checked.

And this one with a Greek pattern? (miander?)

This is a Daikin REDMOND RB-A503 coated bowl. On it, a drawing is squeezed out in a circle and because of it the bowl does not fit into the Panasonic body.

Girls, tell me please! I want to make yoghurt at 550. Would you like to expand the steam basket with adjustable depth or leave it at the height of the jars?

Damn, you need to push it apart! So the lid will not close))) to herself and answered

For those who cook (or will cook) strawberries, berries more than 700 gr. it is impossible, otherwise you have to wash the valve and cover

Sergey, thanks for the warning. For the sake of such a volume, it makes no sense to start cooking jam. A strange regime turns out.

This mode is not for winter harvesting. It is understood that you have cooked, ate and cooked more.

[Mode No. 19. Jam]

Is this about the jam mode? He is very active, boiling violently there. I wouldn't use it to make jam - why should he boil like that?
Here, I showed how violently it boils

Mode No. 19. Jam... In this mode, the liquid boils quite actively with the lid closed. I cooked fruits in my own juice (I have not prepared a recipe and video).
After 10 minutes from the beginning, after 20 minutes and at the end of the hour mode:

This mode is not for winter harvesting. It is understood that you have cooked, ate and cooked more.

so not interesting

This mode is not for winter harvesting.

Well ..., and if cartoon and xn, then very much even for winter

He is very active, boiling violently there.

Oops, I missed it, next time I'll try for example on compote

Dear experts or simply owners of a Panasonic multicooker, help me make a conclusion about the rationality of purchasing this device!
In the online store Eldorado, a promotion is now underway, according to which the 530th model can be purchased for 5990 rubles. I was delighted and ordered. Before going to the store, I turned to my favorite forum and saw not very flattering reviews ... Tell me, is it worth buying it in your experienced opinion? Given all the pros and cons, what is the final verdict? Is it worth the risk or not? I only trust your opinion and really hope for your help.

Why not flattering ?, it is identical to 550 (540), except for some programs and a non-volatile timer, as the former owner is telling you (if not the cant with steam that was on all models, they continued to cook on it).

sergN, the question is not actually how the models of this series differ (the 530 suits me perfectly in terms of functionality), but in the detected defect. Deep down, I hope that now there will be a new batch and the manufacturer has eliminated the marriage. I really want this model, but it will be difficult to wander around the services, so I can't make a final decision.

You need: 1 - look at the release date on the box as a guideline such numbers - 4090321 (where we are interested in the first three) 1 (4) - year, 2 (09) -month.
2 - ask for a new pan or an old one, I have a September one but with a new pan.

This is the argument! Straight better, thanks! Pick up food!

I was in the store today and watched the cartoon live. Outwardly, I liked it, the build quality is good, the lid is not moved anywhere. The first digits of the batch number 401 were a bit misleading. What does it mean? Year 14 and month 10? So the party is not very new? I haven't picked it up yet (there is still a reservation for 4 days), I would like to hear your opinion.
And another question: Sergei, you say to check the old or new bowl, but how can this be determined? There is no hope for consultants, it is useless to ask.

The number should be of the form XXXXXXX seven-digit) we are interested in the first 3, where X (year, the last digit, if 4 then 2014, 5 -2015), the next two XX (month in digital format) you have 01 - January, which is very strange they started appear in the middle of the year (July, August, September). Are you sure you are not mistaken in the number ?, it must be seven-digit.
And if the lid is exactly on the axis?, Then this is a big plus, I had three copies, 1-530, 2-550, and each visually off-center

Good evening everyone. I also decided to write about the recent purchase of a white Panasonic SP-TMX-530. I bought it from a chain store at a discount. I really wanted her. I don't know, maybe this one is with a marriage, the release date costs 4101821 the Self-cleaning program did not expose, I drove it off. The smell was, but not strong. light, chemical, quickly passed. This is my third cartoon. There is a simple Cuckoo-0821FI and Steba DD1. As long as you like it, the programs are well regulated. I made lazy stuffed cabbage rolls, at first on Stew, the program was very quiet, measured the temperature, it did not rise above 95 grams, then I remembered that there was a program of the same name in it, stuffed cabbage rolls, things moved faster, the program was more intense, it stopped again, the highest rate came out 99.7 ...
I also experimented with frying. The Roasting program corresponds to the name, not Roasting, but Roasting, it seemed to me very soft, I would call it Pastry. Do not overcook on it, the Express program fries more in my opinion. Now I cook soup on the same program. It gurgles so gently, I made measurements for myself again, it did not rise above 95 grams.
Last year I bought myself a thermometer, so I'm playing. It's a pity that they didn’t make the Vexation program, or they would have set more time on the Multipovar. She also cooked Rice, I liked him more in her than in Cuckoo. Well, I'll play with her. And then I'll put it on Self-cleaning. This is for testing, but I don't see any point in this program .. If steam starts to flow, I'll carry it back. Further, according to the plan, baking must be done on it. The cartoon is good, but I probably wouldn't take it for 10 thousand or more. And even in the store I put a 5 liter cup from Redmond in it. The lid closed normally and there was no backlash in the lid.The native saucepan is lower and the lock is flimsy. But the drip tray is excellent. Not for beauty, it's all there condensation. My first biscuit, not knowing how to flip the image, sorry.

[Manu]

Manu, to replace our September 550th, they issued an October 4102121, which is close to your 4101821. So the October is guaranteed with a new bowl. In addition to the not so flattened upper edge of the old bowl, the coating of the outer and inner sides is gray. The new one has an almost black outer coating and a much darker interior than the old one.
🔗 🔗

To the touch, the lid is still shifted slightly to the left relative to the base and the left part of the silver edging has exactly the same imperfect fit as on the old

(September photo)

I may be confused, but I don’t remember something in the old recess for the valve retainer indicated below, that is, the cover was also modified and the installation of the valve at an angle is now impossible, although this is not critical due to the structure of the recessed ring with the inscription “Loosen <-> Fasten "with a hole in the middle


🔗 🔗 🔗 🔗

Found an old video Julia Mir with valve set at an angle
D1stGVx5V_8

I have a new one replaced, too, in September. Before that, it was generally August. Everything is exactly the same as in the pictures: both the color of the bowl and the notch.

[Roza_Irina]

Roza_Irina, based on information from Ivan Skosogorenko at the link sergN, now, perhaps, it makes no sense to navigate by date. If I understand correctly, the remnants of defective multicooker frozen in the sale mentioned there were re-equipped with new bowls and re-put on sale. Only the cover with your September notch does not quite fit this assumption. Don't you remember, there was also a notch in your August? Perhaps not only the pots were changed, but also the lids were withdrawn from sale ?!

I still have the August series and there is a recess for the valve on the cover.