Dough sheeters-noodle cutters (model selection, features, reviews)

Thanks for the answers, girls!

[tight]

when I make homemade puff pastry, I get a dough thickness of at least 5-7 mm. and wondering whether the dough sheeter will be able to roll the same thickness or a maximum of only 3 mm is obtained at the output?

5-7 mm will definitely not be able to, the maximum distance between the rollers is much less. Look at the characteristics of the rolls, there they write the max and min thickness of the rolled dough.
It is not entirely clear why a machine is needed for rolling out dough of such (5-7 mm) thickness, here the rolling pin can easily cope with it. The task of the dough sheeter in stretching tight test before thin states.

[Want to know everything]

Tatyana (Want to know everything), your mailbox is full, I write here:

this Fake!!!!. Firstly, there are no logos and numbers on top. Secondly, in Ampia, the nozzles are, as it were, built into the general body, and there you can see that they are mounted on the grooves. Third, it says marKato, and in the original marCato.

Anyone in the know what the Kyuhenprofi Atlas Compack noodle maker has to do with Marcato Atlas? Much less price:
🔗
I already started to buy from the marcato website for 6 thousand. and here the German showed up.

[tascha]

Küchenprofi Atlas Compack noodle machine for Marcato Atlas

tascha, no.

[Omela]

OmelaI suppose the German is worse?

[tascha]

tascha, you need to look for reviews of real users. I don't remember if any of the girls has such a machine?

But what is it in the end !!!
I decided to order a rolling machine with a motor. There are only two options and I don't like both. Atlas rolls thickly, the Empire has a kind of moronic motor ... The devil is fastened, it sticks out at hand not on business, and what is this blue plastic garbage ?? I'll either break it or lose it, and in general I don't understand the meaning of it yet. Why would she?

Girls, no one spoke live with two at once, huh? What is the fundamental difference between them?

Atlas rolls thick

This is not true, where does this information come from? The Atlas has 9 thicknesses of rolling, from 1 (thickest) to 9 (thinnest). I'm 8 and 9 very thin, I never roll like that, almost filo dough))

[Bijou]

The Empire has a moronic motor ...

Bijou, the motor is normal, and not moronic.

The devils are fastened like, sticking out at hand not on business,

Fastens normally and everything is at hand.

and what is this blue plastic garbage ??

Watch the video and you will understand everything.

Atlas rolls thick

Atlas rolls not thick.

Atlas rolls thick

Who said??

Who said??

Specifications.((

Liliya64 from 05 Jan. 2015, 22:22
and here is what I found in the original book:
(https://Mcooker-enn.tomathouse.com/ga...94210/WP_20150105_003.jpg)
Apparently the translator is confusing the numbers. I'm not guilty.

0,8??

Here's another tip about the thickness:

Masinen from 15 Oct. 2014, 18:22
Girls, I'm not happy (((she rolls thicker than my Chinese copy of the amp.
In short, I was upset with the purchase.

Fastens normally and everything is at hand.

Well, maybe ... But just from the video it looks very unfortunate.



The motor is moved far forward, which is why the entire structure of this user looks unstable and really sways. ((I still didn't understand about plastic, because other brands don't have it, so you can do without this rattle? It is translucent fragile, plus, additional weak place to breakdown.

But the Empire seems to roll thinner, everywhere it is declared from 0.2. But in fact I do not know.That is why I suffer ...

Well then you need one like Lena's Tim. Here, for sure, nothing will interfere

Is 0.8 mm thick? I, too, have never skated at 9, it will be too thin. And why do you need such a thin dough (just for fun I ask)?

[natalisha_31]

natalisha_31, thank you, kind woman.
First of all, I looked at her. But it is almost 20 thousand even on the Italian site without delivery. My perfectionism doesn't go that far. More precisely, it is distributed, but the wallet - alas.

I've just finished my weekly epic with the choice of a mattress, now there's a new attack - at night, the rolling machines will dream.))

Added Wednesday, 09 Mar 2016 2:53 PM

And why do you need such a thin dough (just for fun I ask)?

Here is the fact that some never include a nine - this is the only thing that prevents me from completely turning away from glancing towards the Atlas.

But I don’t know why ... I now have a cheap manual one for testing, after which I always roll it up to transparent on the board to stick dumplings. Yes, and the noodles come out from under it a little thick, I in manual mode in my life got used to thinner noodles. So I also often finish rolling it with a rolling pin. (

at night the rolling machines will dream

But on a new mattress

0,8??

What's that 0.8mm thick? It's very thin, it's transparent that the dough is torn. They are mm, not cm ...

What's that 0.8mm thick? It's very thin, it's transparent that the dough is torn.

Intrigued.)) Next time I will make the dough - I will fold a few sheets and measure how many of them per centimeter will have. Maybe I'm really dumb.

Added Wednesday, 09 March 2016 3:02 PM

But on a new mattress

Exactly! But the mattress will only be brought by April, alas. ((

[Bijou]

Bijou, Lena, here Masha rolls pita dough on the Atlas Watch from 2 min 03 sec.

I ride dumplings on the Atlas for 5. Then it is very thin, it breaks during cooking. I never skated on 8 and 9

Intrigued.)

No, well, what's easier? Take a regular ruler, the chira is 1 mm .. It can be seen that 1 mm, and 0.8 mm will be less .. Here is the thickness of the layer ...
I don't know how even thinner it should be ... Nanolapod will be ..

[Bijou]

Bijou, specifications are approximate. And they do not correspond to reality. Rolls very thin. Take Atlas, you won't regret it!

Added Wednesday, 09 March 2016 3:12 PM

kirch, similarly

It also seems to me thinner than 0.8mm. There the dough is completely transparent On the strudel just

I have a trivial question, but still can someone have experience to share with me. There is no way to spend money on an expensive noodle cutter, but a mediocre one, please. Do you think there is a difference between Bohmann BH 7778 and Giakoma 3x1? Or is there no difference?)

thinner than 0.8mm. The dough there is completely transparent

Only a micrometer can accurately measure ..

Added Wednesday, 09 March 2016 3:29 PM

What do you think there is a difference between Bohmann BH 7778 and Giakoma 3x1? Or is there no difference?)

The difference may be in the price and quality of the material-metal, but so .. I don't think that there are any fundamental differences ..

Lena, here is Masha rolling the pita dough on the Atlas Watch from 2 min 03 sec.

Ahaaa ... Here it seems quite subtle and further 7 she did not go .. Why then complained?

Thanks, I wouldn't have found this video myself.)

Bijou, approximate characteristics are indicated. And they do not correspond to reality. Rolls very thin. Take Atlas, you won't regret it!

So I hope that some plus or minus are present and I can get lucky. Although knowing my Jewish happiness, I can even doubt that I was not lucky with Burner, he chops thickly.

And, here's another photo from the topic:



Is it the cost of photography or is the gap really uneven over the rolls? It seems that the center is a little thicker, right?
And the machines themselves, which are Atlas-Motor and simply Atlas, are completely identical to each other or not?

And the machines themselves, which are Atlas-Motor and simply Atlas, are completely identical to each other or not?

Identical
At first I just bought a car to try it manually, and then I bought the motor separately

And the machines themselves, which are Atlas-Motor and simply Atlas, are completely identical to each other or not?

One with a motor, the other without ...

Added Wednesday, 09 March 2016 3:51 PM

Is it the cost of photography or is the gap really uneven over the rolls? It seems that the center is a little thicker, right?

Take a sheet of paper, fold it along the thickness of the middle, so that it enters the middle and draw it to the edges, if it does not get through, then a gap. If everything is fine, then the costs and the wrong focus ..

well, I agree, in the same price category, the noodle cutters are almost the same, only the difference is in the size of ravioli, 3x3 and 4.5x5.5 cm.) 3x3 ravioli will be a bit small)))

Take Atlas, you won't regret it!

By the way, the funny thing is that on the Italian website Atlas is cheaper than the Empire.))

Is that how Atlas does it?

Added Wednesday, 09 March 2016 4:13 PM

Identical

One with a motor, the other without ...

But who knows, those manufacturers ... Maybe the lines are different and in the little things something comes out ... I’m already used to seeing different handles.

Take a sheet of paper, fold it along the thickness of the middle, so that it enters the middle and draw it to the edges, if it does not get through, then a gap. If everything is fine, then the costs and the wrong focus ..

As soon as I ripen - so immediately and without fail.

By the way, how many layers of plain paper for a printer can fit there?

Is that how Atlas does it?

I think completely, we should try to take a picture on the text next time)

By the way, how many layers of plain paper for a printer can fit there?

At the thinnest? You will also need to experiment

Is that how Atlas does it?

Does. Just do not twist on a small piece at once, gradually reduce the thickness. And dough with butter (according to observations, it breaks less). And let it lie for half an hour after kneading under the film, it will ripen. Then roll.

I took a joint venture to the Ukrainian-CIS, for more than two years I did not regret it, I bought more attachments. I have an atlas with a 15 cm wellness motor.

you should try to take a picture on some text next time)
At the thinnest? You will also need to experiment

Here ssemu you need to teach. Well, what an incurious people went to! It works - they are happy ... Not to start some kind of deep research for the good of society ...

Added Wednesday, 09 March 2016 4:46 PM

Then roll.

Got it, thanks.

Here ssemu you need to teach. Well, what an incurious people went to! It works - they are happy ..

And don't tell me So I'll get a Taper dumpling dish soon, I'll make dumplings - I'll do experiments

[julia_bb]

julia_bb, swept away!
I already have an itch - I've sniffed out all my equipment along with photo reports, I already have almost truncated in Greece, I don't buy anything, there is nothing to research. Only a mattress ... So and so, hike, I know more about it than the seller.

Maybe the lines are different and in the little things you get out

Lines cannot be different .. The parent company cannot make a line in Italy with a parenthesis, but in Romania without it .. It is necessary to recalculate and redraw all the design part and reincarnate in metal .. What kind of monetary costs are needed? The capitalists will not agree to this .. This is a flow, continuous production and everything should be the same .. all spare parts .. all components .. They can only modernize the lines, but again in all branches .. Then you need to look at the model numbers, one tsifirka or letter change everything ..

The lines can only be modernized, but again in all branches .. Then you need to look at the model numbers, one small figure or a letter changes everything ..

Right now I don't remember the links, but once, in my previous "visit", I noticed that there are two stainless hand-held Atlases with different articles, for example.))

there are two stainless hand-held Atlases with different article numbers, for example.))

Engineering thought I played out and modernized and embodied in a pen, it can be more convenient to twist it, or the handle itself is not from an expensive plastic, well, a knob, but from a cheaper plastic or vice versa, from a more expensive and high quality one. First, they launch a trial batch, sell, watch how the sales have gone .. And then they start to launch serial production ... There may be one experimental line on which all innovations are introduced .. In general, marketing, one word to him ..
Even if the metal alloy is different, then another marking is already underway. For a certain percentage, let's say more chrome or nickel, then another article .. not invented by us .. it was always like this ..

there is nothing to explore. A mattress, perhaps.

From this place in more detail, please. I have been very concerned about this issue lately. Maybe not in noodle shops, but in repairs, for example.

[Anna1957]

Anna1957, is it up to Susanin?)) But I can hardly be very useful - for mattresses, people have different tastes.

By the way, how many layers of plain paper for a printer can fit there?

I couldn’t stand it until morning, I went and checked it - blueprint paper 80g / m2 3 sheets with a creak still pass, 4 are gone.

[Bijou]

Bijou, Lena, having read the topics, and, being in Germany, bought an Atlas Roller 180 - only rolling by 18 cm. I can say one thing - it's a thrill! I love time-tested classic things for predictable results! Before that, I didn’t often roll the dough with my hands (maybe because I didn’t have a dough rolling machine), but here I wound up such pita without any training and rehearsals, I can’t believe it myself. I think that any "teapot" will cope with the Atlas.
But what a pleasure it turns out to be rolling the dough!

I couldn’t stand it until morning, I went and checked it - blueprint paper 80g / m2 3 sheets with a creak still pass, 4 are gone.

I think that's very good, right?

bought an Atlas Roller 180 - only rolling 18 cm.

This is also with a motor? I also looked at something like that. But the cutter is also hunting. Here on my curved Chinese and with manual rolling, I even saved up noodles, today I cooked the fifth time.))

But how can I understand you!

I have bought it without a motor yet, but you can fasten it (for Birthday). And I plan to cut the noodles with Teskom's multifunctional knife.

And I plan to cut the noodles with Teskom's multifunctional knife.

Why not a noodle cutter?

Duc noodle cutter, I feel, I will not stop. For a figure it is fraught,: oops: deliberately do not buy so to speak.

Right now I don't remember the links, but once, in my previous "visit", I noticed that there are two stainless hand-held Atlases with different articles, for example.))

The factory periodically updates the exterior, including in order to make it more difficult to fake

Duc noodle cutter, I feel, I will not stop. For a figure it is fraught,: oops: deliberately do not buy so to speak.

We all have figures ...

Yes, even though it is believed that hard grades pasta is useful, who argues, and how tasty, BUT nobody canceled the philosophical law "Transition of quantity into quality".

Nobody canceled the "transition from quantity to quality".

Oh, come on ...