How Do I Pick a Good Bed Mattress?

[Anatoly]

Anatoly,
I will go tomorrow and lie on all that will be presented in the salon ...

Peace be with you bakers!
we also took pillows - my wife is asleep, but she seems a little too small for me, although in principle it is comfortable to support her head

Here's how I found the perfect mattress for myself. By chance. According to the testimony, she went to a planned operation. During the day you are placed in a special intensive care ward, you sleep at night, and in the morning of the next day you have an operation and only then you are brought under anesthesia on a gurney from the operating room. The operation was difficult, cavity. I had to lie down in this ward. And since the ward is an intensive care unit, there are not ordinary beds like in a hospital, but special beds of a complex design, where you can raise the headboard, or raise your legs and the ability to hang and connect all kinds of medical devices. So, having slept one night before the operation on this bed, I was simply stunned! I woke up as reborn! I didn't feel any pain or pull at all. Usually in the morning my back hurts, my neck is a little and the muscles of my legs are taut. And here nothing hurt at all, as if all my long-term habitual weakness after sleep was only a dream. The bed of the intensive care bed consisted of three independent sections and they did not have a strict horizontal line in general. Surprised, she examined this wonderful bed and went to the operation. After the operation, my stomach and stitches hurt, but my back did not hurt at all. And it was so unusual, because I was already used to living with a problem back, and the thing turned out to be just the design of the bed! And I tried to change mattresses and beds. On medical equipment websites, these types of beds are expensive. But this bed for the 16th year has not left my head. I really wanted to buy, I was stopped by the thought that there would be such a dumb bed in the bedroom. But if further my back becomes even more depressed, then I will definitely buy myself such a bed. These are my conclusions that the design of the bed is important, and an even frame and any softness, filling and high cost of the mattress are secondary. And now I think that it is the flat horizontal frame of the bed that is the culprit for back pain, since muscles and ligaments are blocked during hours of sleep when the spine is in the wrong position. Here is such a case I had when testing a special-purpose bed. And the hospital mattress was just a battered hospital cotton mattress, sewn into an orange medical oilcloth.

[Creamy]

CreamyAlevtina, I agree. I went through the mattresses, which I have never met. The result is one. Now I just sleep on a mattress. This is what they saw in the house-house, which suits in size and height, and they took it. And you know - we are satisfied, there are no complaints. I'm thinking of trying a mattress made of ..... I can't remember, which is twisted and then straightens, they are presented in the subway. It's just interesting to try a different mattress format.
From what I just remember. About 10 years ago, my relative bought a bed, large, beautiful and mattress for her. I bought it at a Perm furniture factory - which is really old school))))) Then I came to visit her, I liked the bed, and the mattress is simply beyond praise. Where, I say, I took it - I went with the bed I arrived at the same factory five years later - there are none and never will be.
The mattress was made according to our old USSR technology, a mattress was needed and I remembered (apparently the beds were made from the remains), springs and straw or whatever was there - such vegetable fibers are stuffed. Hard, high, you know, their edges are not sharp, but slightly rounded, my great-grandmother had the same one))))), so the mattress is still ideal.That's how it is - a completely out-of-date mattress, but so cool.

And I didn’t even know that such a good topic was being discussed here. I myself am now tormented by the throes of choice - I bought my daughter a bed (without a mattress). And the size of the berth is non-standard - 100 * 190 cm. The child is 10.5 years old, the body is growing rapidly. I don't even know which is better - medium hardness or hard, in general I tend more towards a springless block (independent spring system). Is a layer of coconut coir required?

Peace be with you bakers!

Bast1nda--

We have just such a roll
🔗

Peace be with you bakers!

Bast1nda--

We have just such a roll

I bought such a mother for the dacha ... very much even nothing))) I agree with Anatoly

We need a good / high-quality, hard mattress 1600 * 2000.

Loyola from the Consul. The whole family sleeps on such.
For myself, according to medical indications, I made a soft layer of latex, then removed the latex. There are 7 coir layers of 3 latex. I feel good.
Husband and son threw out latex.
Coira 100%. Very heavy. Can be ordered with latex interlayer. But only latex, not a substitute for it. Expensive. But ... this is a dream.

[Rada-dms]

All TRICKS !!!

Good day, dear members of the forum!

I need your help / tips / advice again. We need a good / high-quality, hard mattress 1600 * 2000. I lay on Ascona, Ormatek, Lazurit, Dreamline, Toris. The husband refuses to "try this" mattresses. All of them are approximately in the same price range and are all made in the same way, that is, there is a layer of coconut coir everywhere. The foot of the ordered bed is low, so the height of the mattress can be any (I think so). The bedroom should arrive on September 25, so dear members of the forum, I really look forward to your advice !!!
Rada-dms, on Belbedding's website did not find a Vegas mattress. If you do not mind, then you can in PM passwords / attendance, where in Moscow to look at the mattresses of this company. Just while looking for a bedroom, we visited 5 furniture centers and did not see this company.
Rada-dms, if not a secret, what model / name do you have at home?

P.S. In order not to ask 25 times, I also wait for advice about the mattress topper.

Any mattress may not fit, for any bed there are recommendations for the PERMISSIBLE weight of the mattress, read the docks for the bed.

Magniflex - MERINO (MERINOS) Italy This is their toughest and most inexpensive mattress, produced for a hundred years. The mattress is normal, I have had one at my dacha for ten years. Previously, the service life was written on it, and I remember that it was 6 years. After eight years, it lost its properties, now it lies in the attic, awaiting disposal.
I have two mattresses at home - Barbara from King Koil and Orland Park from Serta, Orland harder, but very comfortable because of the top layer.
In a country house just from belabedding

🔗

Venus is called, but I asked to do it without any coconut coir at all. I can ask for you too.

Mattress topper Eger - only 4 cm, of which 3 cm of latex wavy plate, removable cover, washable at 60C.
He gave comfort, that is, you lie and do not fall into the hole, and the body sinks a little, in the area of ​​the joints it is very comfortable, the hand did not become numb.
The main thing is in the correct support of the spine and the pelvic area, but the joints on a hard surface are not very good for a long time, blood circulation is disturbed.
I lay down and compared the non-spring ones in Ascona, specially on two different floors in Rumyantsevo I lay down and compared the same model. So on the model, which will be there for a little more than six months, you obviously fall into a hole, even the manager agreed ... And the price is very high. And when they began to “rub in” about the pink layer of one cm, which protects us during sleep from the radiation of a mobile phone, then I just left. Since another firm has a similar mattress with the same layers, only without the pink layer. These firms have merged, but retained their names for the same mattresses.
Belarusian are good, they have German springs and dumping prices at the moment. The enterprise was created with a focus on the European market, then they began to make their own and came to us.
There is a department in Your Krasnogorsky House, and the site has a map and phone numbers of places where you can go or call and find out about the availability of the required model in the showroom. Good luck with your choice, it's a serious matter!

[Rada-dms]

Venus is called, but I asked to do it without any coconut coir at all.

Rada-dms, in model 2.15 there are no coir in the section and is not present in the description on the website, but in model 3.15 the coir is indicated. I will choose a time to go to the field, I will report back later

The bedroom should arrive 09.25

Alas and ah .... only a call came in with an apology and postponed to 05.10
Everywhere you have to see "+" .... the mattress is still not selected.

Barbara by King Koil

or Venus 2.15
Rada-dmswhich one is more cute ??? Or Barbara used to be made of other material too, so the comparison with the current one may not be correct, right ???

Peace be with you bakers!

Here we take


🔗

[shade]

shade, Anatoly, You have decided to change your Italian to a Russian

Peace be with you bakers!
well yes
They wrote smart names and turned down the price -

🔗
This mattress contains Tempur-Tempur material. I bought a mattress topper from my native Tempura. We couldn't sleep either in winter, let alone in summer. In summer, the feeling that you are lying in molten plasticine, in winter when heating it is very hot, it bakes right after a while. I tried to put a thin linen mattress topper on top, it was still hot. I know that many people cannot sleep at tempura. You are drowning, yes, even the dog liked it, but I would not recommend it to those who often change their body position. And for those who are hot by nature, I also do not recommend it. And he also does not instantly adapt to the bends of the body, so when you change position, you immediately wake up and feel this drowning. Plus, you also need to lean on an arm or leg in order to roll over, but there is no rigidity.
My choice is a hard mattress with a large number of imported springs, a comfortable soft top layer that does not affect the position of the spine, but gives a feeling of some bliss, comfort and protects against pressure on the joints.
I advise you to choose three mattresses that are affordable, and lie on them a hundred times, by elimination and comparison, choose from them. You need to dress easily and better in knitted clothes, take a pillowcase with you to lie down with a pillow, which will be given by consultants.
And remember that a mattress that is too hard can be softened with a good latex mattress cover, but too soft is problematic.
And yet, there are mattresses with a springy effect, it is easy to feel, these are the ones I would not recommend.
I won't tell you about Barbara, but in Khimki, In Your Home, Orland Park is definitely not the same as before. It was hinted to me that the materials were different. Therefore, I advise you to lie on the Belarusian, suddenly something will do, and you will pay much less. And the clear origin of the materials always pleases, especially the German spring block.

[Creamy]

CreamyOrmatek has orthopedic bed bases, with remote control.
It looks like I will change their mattress for the second time. In the first, the technology was violated, there was a wild crunch, they immediately wrote a claim, the money was returned. I chose for a long time and ordered a premium from them with 6 cm of latex on a 7-zone spring block, according to the action. The first 2 months of joy knew no bounds, my back did not hurt in the morning, my arms and legs did not go numb. And then the hammock effect began to appear more and more. Turning the mattress helps the day by 3. Probably, if I chose now, taught by experience, I would just take a spring block with a minimum layer, and select comfort with thin mattress covers, since there is a large selection of them.

[Lucha]

Lucha, Ludmila, Thank you! Here, once again, I am convinced that the truth is most often simple.

Peace be with you bakers!

[Anatoly]

Anatoly, what is this NIGHTMAR ??? !!!!

Girls, boys! There was a need to buy a thin mattress (up to 10 cm) for a sofa. The sofa will not be assembled. There was a big dent on one side, I had to sleep there, I thought I would die in 3 hours. Share who has what.

Peace be with you bakers!

not long ago my son bought 140x200 MagicSleep Format 10
True, then the discount was

🔗

[Anatoly]

Anatoly, I can't follow the link now, I'll go to work tomorrow. Ask how it feels.

Peace be with you bakers!

well, a couple of weeks just from the dacha will arrive tomorrow - I ask

he had the same problem - a dent on one side - well, he kneeled in the same place, that's what happened
they wanted to change the bed, but decided to buy a mattress - it seems that at the end of November they should indicate the priority in the district \ well, relocation in the sense \ if they move, we will buy new furniture, and the mattress will come in handy anyway

I just lay down the current - it seems comfortable, but I did not sleep on it

Tancha, have you decided on a mattress? We have a dreamroll contour foam mattress, it is true that it is 14 cm, not 10 cm, but this is a full-fledged mattress with a high-tech filling fomline. There, such grooves with foam are made so that it adapts to the body.You can roll it into a roll, it is delivered that way, it is light in weight, so it will go perfectly on a sofa.

Peace be with you bakers!
In my opinion, we don't save on the mattress - we get up fully rested
That's just about the pillows we have from the memorial, but they are too small for my lay down

If you know, tell me. Futon mattress, is it comfortable? not very tough?