Ukka
Well, sho - he sees, but does not open the old train. (infa there, as expected, on disk D) ...
And this is to remember his mother and grandmother?
kubanochka
Quote: ukka

Well, sho - he sees, but does not open the old train. (infa there, as expected, on disk D) ...
And this is to remember his mother and grandmother?

We will not draw a family tree, another time.
What does he see? And drive C and drive D?
Ukka
Since the old train. was formatted C- in NTFS, and the log. drive D is in FAT32, it is clear why the new one formatted in NTFS does not open the old one. - it does not see the system one, but FAT32 does not open ...
He sees it as RAW ...
Wait, I'll put together a second system unit (I'll put the old railway in it) and carry it with a USB flash drive ...
kubanochka
Quote: ukka


Wait, I'll put together a second system unit (I'll put the old railway in it) and carry it with a USB flash drive ...

Well, that's also an option. And the monitor, as Leska advised, will not be able to rent from the neighbors for an hour?
Ukka
Oh, Lenchik, I won't complicate my life ...

You can connect to a TV set, but there is no second keyboard and mouse ... And the process will not speed up ...

I will transfer the information that Julia needs now to the new train on the flash drive. and then I'll come up with something ...

Painting - there are three systemists in the room - mine, brothers and office, from where the old train was borrowed. all around screwdrivers, bolts, etc.

And my brother presented an HP printer to me yesterday ...
Pakat
Quote: ukka

Since the old train. was formatted C- in NTFS, and the log. drive D is in FAT32, it is clear why the new one formatted in NTFS does not open the old one. - it does not see the system one, but FAT32 does not open ...
He sees it as RAW ...
Wait, I'll put together a second system unit (I'll put the old railway in it) and carry it with a USB flash drive ...
In such cases, you need to work through a third system, say through
Hiren Boot CD, she would see both discs and let you do a lot with them ...
kubanochka
Quote: Pakat

In such cases, you need to work through a third system, say through
Hiren Boot CD, she would see both discs and let you do a lot with them ...

Well yes! There is no keyboard and mouse ... And there is no cable ... But there would be a cable to connect two computers ... Well I can't reset it by e-mail In your foreign countries it is of course ...
Pakat
kubanochka, you do not understand, you put both hard drives on one computer,
then with the Hiren Boot CD, you start his system, it works and lets you do whatever you want with the hard drives and their systems ...

Type in Google - what is Hiren Boot CD, a lot will become clear ...
Jefry
IMHO Hiren Boot CD, this is more for the pros, and ukke you need a quick and simpler way.
Once again, I recommend sticking disks on different loops, resetting the BIOS and in the BIOS clearly indicate which disk to boot from.
Ukka
Pakat, all this is very cool, but too clever for my mind ... and you can see both discs in Commander Volkov ...
But when you try to install Windows on the brothers. when both are. were in mine, it was installed (almost) on my train. etc.
And now it gets in the way when loading ... But I choose a stable Windows from the two and boot normally ...

There will be time to reinstall Windows ...

And on the brotherly train. everything works ok ...

In general, I now have two normally working system units, from one it remains only to transfer the information to the other ...

I transferred some of the information with a USB flash drive, then I'll think about how to transfer the rest ...
Maybe where you can fill in 20Gig of information, Schaub not suffer ???

No, well, there is only 12GB of DBNs and a base of drawings, and the rest is recipes and instructions for kitchen appliances ...

And yet, as my teacher used to say the computer. business, not every Windows can withstand extraneous bells and whistles. In Windows itself, the potential is much greater.
Pakat
Quote: Jefry

IMHO Hiren Boot CD, this is more for the pros ...
Jefry, I am far from a pro, just for a long time at the computer and work with rubble disks.
With their help, much can be done easier and faster and all the programs for this are at hand ...
kubanochka
Quote: Pakat

kubanochka, you do not understand, you put both hard drives on one computer,
then with the Hiren Boot CD, you start his system, it works and lets you do whatever you want with the hard drives and their systems ...

Type in Google - what is Hiren Boot CD, a lot will become clear ...

Pakat! I know what a Hiren Boot CD is. The problem is that when Olya puts both disks on one computer, the disk with information does not open. She doesn't have time to figure out what and why. No need to confuse Olya even more. It seems that it is really easier for her to transfer it with a flash drive, she has not twisted adjika yet
kubanochka
Quote: ukka


In general, I now have two normally working system units, from one it remains only to transfer the information to the other ...

I transferred some of the information with a USB flash drive, then I'll think about how to transfer the rest ...
Maybe where you can fill in 20Gig of information, Schaub not suffer ???

Ol, and what prevents you from continuing the transfer? How much USB flash drive?
Ukka
Pakat, you are right, but when there is time, and I did not have this program, but the dotsya is above my soul, tomorrow is the first task for her to carry, and now Acad is just being established ...

Quote: kubanochka

Ol, and what prevents you from continuing the transfer? How much USB flash drive?

That for 1GB ...
kubanochka
ukka, Olya! Now I was sorting through my bins, I had a crazy thought that somewhere two DDR strips of 512 MB were lying around. But alas ... But there was a 250 Gig hard drive. One of these days I will visit a friend, she still has a computer with old connectors, I have already had it on all machines for a long time. D. SATAIII, I'll connect and see what I need there and what kind of Windows is there? Then I will tell you, as I promised with the guide. So wait until I check it out. And he's yours!
Ukka
To summarize ...
General tips, Lenochka kubanochka help and my amateurish efforts were made:
1. Installed memory with a total size of 512 MB. Not bad already !!!
2. The office computer is assembled and ready for delivery. Formatting and reinstalling Windows will take max. 2 hours.
3. When the norm. Windows on the office to transfer information from dick to disk - an hour.
4. The normal working version of Akada will be given tomorrow or the day after tomorrow.
And Julia can do projects and earn practice on laptop... And two computers in the house are also not bad !!! The two of us can do twice as much !!!
kubanochka
Olya! ukka! Only don't faint, but I found another one for 80 gigs
Shake your acquaintances on the RAM (you need 1 Gig), I do not promise, but with God's help ... Then we can install Win7, and I will give the AutoCad 2011 disk. I am currently working on this version. Let the child get used to working with good programs!
A-Toxa
kubanochka, Better master Inventor. As a worker in AutoCade, Compass and, in fact, Inventor, I bow in the belt to the developers of this program, and to the nameless hackers who broke its protection. In 3D, the best design program, IMHO.
Ukka
The fact is that Julia and I do not need highly sophisticated design programs ... We draw pipelines simply with lines, ZD is not needed ... I work equally easily in Akada and Compass, and sometimes I transfer drawings from one format to another. .. The fact is that we will work privately and it is very unprofitable to buy an A3 printer ... And in the salon, where you can print drawings, there are not always viewers of new versions of programs (not even programs) ... But I do so in Compass more convenient ... But let Julia develop as a young specialist.

And here I saw the allklima program on the internet. I wonder what she is ...
A-Toxa
allklima has not met. Well, based on the name - for me it is not needed ... I have mechanical engineering, fur. treatment...

By the way, not so fancy Inventor: everything is intuitively clear. I drew how to put it on my soul, put down the dimensions and everything was leveled ... But to get an almost photographic image of the projected object, and even if you want to be animated, you need to make an effort.But the customer sometimes asks when you just show him a picture: "And when did you manage to make THIS ??? !!!"
kubanochka
Quote: ukka

The fact is that Julia and I don't need highly sophisticated design programs ... We just draw pipelines with lines, we don't need 3D ... I work equally easily in Akada and Compass, and sometimes I transfer drawings from one format to another. .. The fact is that we will work privately and it is very unprofitable to buy an A3 printer ... And in the salon, where you can print drawings, there are not always viewers of new versions of programs (not even programs) ... But I do so in Compass more convenient ... But let Julia develop as a young specialist.

Likewise ... I am engaged in the design of security systems (fire prevention, fire alarm, warning, fire extinguishing, smoke removal, security, video surveillance, access control) + electrician + preparation of evacuation plans, etc. I do the work either for my personal company, or for other design institutes. For example, many people prefer to give gas extinguishing to me. And depending on who I'm doing the work to, I use either AutoCAD, or Compass, or Magic. I use 3D, so to speak, for personal purposes, to play around
Without A3 format, I would have disappeared. Large sheets have to be printed at the institute.

So, Olya and Julia, we are colleagues. What about your specific projects?
kubanochka
Quote: kubanochka


So, Olya and Julia, we are colleagues. What about your specific projects?

All! Understood by Allklime - OK OV
Ukka
Yes, we are colleagues !!!

I specialize in heat and gas supply ... I also calculate cooling systems for production lines. Occasionally I make water ...
Julia is a beginner designer - there is only one in the archive, but a large project for heating from scratch without her mother's help ... Now Julia will be trained in water and sewerage and ventilation (she will do the rough work).

But due to the crisis, the company closed the branch in which I worked and projects are very rare ... I have to sell sweets and cookies in the supermarket ...
Jefry
Quote: Pakat

Jefry, I am far from a pro, just for a long time at the computer and work with rubble discs.
With their help, much can be done easier and faster, and all the programs for this are at hand ...
I meant that such a disk should at least be used once in a calm atmosphere in order to figure out what's what.
I also have it, but I find it much more convenient to use ZverDVD. Much more powerful and functional tool. And the system is put on full automatic in half an hour or an hour with all the bells and whistles.
NatalyaN
Olchik! I read your torment, smiled quietly, remembered my computer, assembled in 2001 and which is slowly making its way. I either graded it a little bit, then the RAM burned out - I had to change it, respectively increased it to 256, then the husband changed the video card - some toys did not come from him in 2005, the DVD writer bought a DVD-rom, but he, an infection, broke down, but they could not replace it - they no longer release this on my old motherboard, they climbed the whole city - everyone just threw up their hands. So on my 20GB disk and I plow.
And now the computer swears at me, said that virtual memory bye-bye, and the programs will work with a brake. I write each message for 5 - 15 minutes, type part of the sentence on the keyboard - wait for it to appear on the screen for a minute. Then I edit if I wrote something wrong. I have been suffering for 2 weeks now, but I don’t know what to do. I can’t clean the disc, the information - pictures and all sorts of books, magazines in electronic form sea. There is no DVD-rum either, so that everything can be thrown off on disks, a flash drive from the house has gone for a walk somewhere, and it would not have been enough for 20 Gig. Well, at least I will soon leave for almost a week, take a break from him, but the problem will remain. In general, the guard.
I even went to a computer club, there is a computer under the house, there a system unit costs 100 bucks for sale, though without a DVD-rum, but that’s trivial things and I don’t know what to buy or what? they periodically update their sitemics, because new games come out and the old ones no longer run. And I’m for work at home, I don’t play with toys ...

And also:
Quote: A-Toxa
... Better master Inventor. As a worker in AutoCade, Compass and, in fact, Inventor, I bow in the belt to the developers of this program, and to the nameless hackers who broke its protection. In 3D, the best design program, IMHO.
Quote: A-Toxa

allklima has not met. Well, based on the name - for me it is not needed ... I have mechanical engineering, fur. treatment...

By the way, not so fancy Inventor: everything is intuitively clear. I drew how to put it on my soul, put down the dimensions and everything was leveled ... But to get a practically photographic image of the projected object, and even if you want to be animated, you need to make an effort. But the customer sometimes asks when you just show him a picture: "And when did you manage to make THIS ??? !!!"
Can you clarify the requirements for this program? I probably need this one now, my husband has just mechanical processing, I see that he often makes drawings by hand.

Well, here, I spotted it on purpose - I typed the answer for 23 minutes.
sazalexter
Quote: Jefry


ZverDVD. Much more powerful and functional tool. And the system is put on full automatic in half an hour or an hour with all the bells and whistles.
Yeah, after these bells and whistles, clients come to us in tears and snot "help" The driver or the program is not installed. And so the curve "Hryun" and even with shoveled dlls and a bunch of unnecessary drivers. Infernal mix
Chef
Quote: Jefry
I also have it, but I find it much more convenient to use ZverDVD.
Let's not talk about counterfeit software, cracks, etc. on the forum. Thank you for understanding
Margit
Quote: NataliaN

... I write each message for 5 - 15 minutes, type part of the sentence on the keyboard - wait for it to appear on the screen for a minute. Then I edit if I wrote something wrong. I have been suffering for 2 weeks now, but I don’t know what to do.
Well, here, I spotted it on purpose - I typed the answer for 23 minutes.
I have the same story, so I first write the message in a notepad or Word - copy it here and send the answer. But, strangely enough, I write like this only here, on, on other sites it is normal. And this has been a long time ago, certainly not two weeks. I would like to chat on the forum, reply to messages, but give up when I have to answer with such torment.
So I am writing this message in the Word - I copy it and now I will paste it into my message.
Chef
Quote: Margit

I have the same story, so I first write the message in a notepad or Word - copy it here and send the answer. But, strangely enough, I write like this only here, on, on other sites it is normal. And this has been a long time ago, certainly not two weeks. I would like to chat on the forum, reply to messages, but give up when I have to answer with such torment.
So I am writing this message in the Word - I copy it and now I will paste it into my message.
Strange affair
Which browser?
Have you tried it in other browsers?
Does anyone else have this?
celfh
Quote: Baker

Strange affair
Which browser?
Have you tried it in other browsers?
Does anyone else have this?
I had the same story on this forum in Explorer, although everything worked on other forums. Then the Bread Maker began to slow down. The programmer came, rebooted everything, updated it, nothing changed. He never found the reason for the inhibition. Now I am sitting in the Opera, and everything is fine, in all forums.
sazalexter
Maybe this keylogger started up on your computer? Do you use a commercial antivirus program?
Margit
Quote: Baker

Strange affair
Which browser?
Have you tried it in other browsers?
Does anyone else have this?
Mozilla browser and Internet Explorer. Kaspersky Anti-Virus is commercial, there is also Agnitum Outpost (not installed in the system), also commercial. Now I was downloading Opera, everything is fine on it, it does not slow down. Thank you, celfh
lesik_l
I had the same thing during the day, now it's normal
Luysia
It was very convenient (fast) to download movies from 🔗

And now I can't go there for several days:

"Currently, access to the service through the proxy server is prohibited.

Sorry for the inconvenience! "

Whose glitch is this? Explain to the teapot.

Uncle Sam
I just went to the specified site from a working laptop through a proxy server.Everything is working.
Most likely to blame are the settings for accessing sites on the computer through which you go to the Internet (proxy server).

the admin is making sure that the traffic is within reasonable limits or that HIS the download speed of films was maximum ...
Luysia
Home computer, settings have not changed lately.

The problem was solved: this is most likely some kind of glitch with Opera. as Mozilla Firefox loaded this page normally.
Gasha
Computer courses on-line

This project is a simple and understandable illustrated computer textbook for people of all ages. For many years the author of this site has been teaching a wide variety of "dummies" about computers, the Internet and computer programs. His name is Ilya Krivosheev and he, like no one else, knows about the difficulties and problems in training. In fact, surprisingly, a computer is no more complex than a mobile phone. It is difficult to disable and very easy to tame. Therefore, the first thing that you must learn before starting to get acquainted with the computer is that it cannot be and there is no need to be afraid. It just requires correct, reasonable handling.

This site contains lessons on the computer from "scratch" to the master. All lessons are completely free. The only thing that is required of you is a little patience and a little work. If in the process of learning on a computer you have any questions, you can always ask them at the end of the lesson or on the computer help forum.

these are free computer courses. Mastering the fascinating world of new technologies step by step, you will master the computer, the Internet, and basic computer programs. Most importantly, remember: the computer is your friend. How do you feel about friends? Right! Love, respect and, most importantly, do not be afraid of them.

🔗
Leska
Be careful! A virus has been launched on the networks. Yesterday I downloaded once again books from libraries that had been tested for several years and a friend jumped out such garbage, and this is very good. good antivirus protection (all imaginable fences in stock)
Is the computer dead or sick? Express help!
Well, I was smart enough not to update Firefox (according to the arrow, they ask them to reset their SMS and pay). And it was impossible to enter any forum site - they showed gibberish - only a field with numbers and letters. We almost fought for 24 hours, caught the Mayachok.1 Trojan, Hosts and some other incurable ones (I didn’t have time to write it down after the child). By the way, I was not the only one who suffered from them.
Kamusik
Recently checking the mail, inactive links to the message are opened. I don't understand, is it a buggy rambler or a laptop? Maybe someone came across this?
Nataly_rz
Kamusik, read hereit looks like Rambler is to blame
Kamusik
kava, ayy! I read that you also have mail on Rambler. And now there are no these glitches? I was already tortured with this copying and pasting, well, it is sooooo not convenient.
Nataly_rz , Thank you!
Antonovka
Kamusik, kava,
Girls, it’s like that for me too. And only on two sites on HP and on cartoon. ru I already wrote to Rambler, but it's a little confusing
Kamusik
So I am writing to them ... How long has this been going on with you?
Antonovka
A week for sure, or even more - I don't remember
Lisss's
comrades, who knows - the laptop began to overload itself without any reason, for no reason, suddenly it is overloaded by itself. and every day more and more often - what to do?
sazalexter
Lisss's Watch the power supply-motherboard bundle. If electrolytes on the motherboard are swollen or flowed (reddish blots on the tops), MV repair or replacement, if you find it under your socket
After replacing or repairing a MV, change the power supply, choose a model from Thermaltake, ACBEL or FSP in the price category of at least 1200 rubles in retail!
This recommendation is for stationary PCs
sazalexter
Lisss's Oh, just saw that this is a laptop
then it is necessary to disassemble and clean the cooling system from dust. If not disassembled then through the ventilation system using a compressed gas cylinder 400 ml HAMA, for example
Lisss's
sazalexter, Sasha, thank you very much!

I bought this laptop only in February, I will carry it to the warranty repair then .. I thought it was something with the software, but if with the guts, then I have to carry it .. thanks for the consultation!

Or do you think you can clean at home without opening?
sazalexter
Lisss's What brand of laptop? To begin with, I would roll back with disk recovery (if any) to the factory settings. It can only be cleaned with compressed air from a cylinder.
Lisss's
lenovo .. I'm afraid to restore to the factory ones - suddenly he asks what, but I won't know what to answer him .. and I have no disk recovery

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers