artisan
Since this Temka is no longer only about viruses, I came here to ask for help.

They gave me a portable hard drive to record cartoons on. I connected, but the computer does not see it at all. Can you do something about it? (open his eyes to him ???) And if you can, how? (I only found on the internet that with the help of TVersity. I downloaded it, installed it and don't understand anything)
Scarecrow
Have you tried all the ports for a start? My laptop, for example, sees certain gadgets only on a certain port for life.
sazalexter
Some HDDs require additional power supply in the form of a second USB or external AC-DC 12V adapter
artisan
Scarecrow , switched! Thank you!!! Issued that the new equipment is installed and ready to go. But the next question is, how to record cartoons on it? With using what???
artisan
Quote: sazalexter

Some HDDs require additional power supply in the form of a second USB or external AC-DC 12V adapter

Oh! everything is lost?!
Scarecrow
Quote: Master

Scarecrow , switched! Thank you!!! Issued that the new equipment is installed and ready to go. But the next question is, how to record cartoons on it? With using what???

Like a regular USB flash drive. Only a very large one. It should appear on My Computer. Click on it and enter.
sazalexter
Quote: Master

Scarecrow , switched! Thank you!!! Issued that the new equipment is installed and ready to go. But the next question is, how to record cartoons on it? With using what???
With the help of "explorer" in Windows and the system drag-n-drop. That is, I captured it with the mouse in one "window" and dragged it into another that is open on the HDD
artisan
The fact is that even through Total Commander, it shows that there are no disks. Not one at all. And in My computer it's the same. No disks. only the CD drive opens, but when I select Write prepared files to it, my drive pops up
Scarecrow
Quote: Master

The fact is that even through Total Commander, it shows that there are no disks. Not one at all. And in My computer it's the same. No disks. only the CD drive opens, but when I select Write prepared files to it, my drive pops up

Reconnect again. You don't need to write to the drive - it's useless. Another icon with a removable device should appear. In My Computer. If it is not there, you will not write anything down.
artisan
Switched to one more connector! Casper worked and the disc appeared !!!!!! Thank you all !!!
Ukka
People!!!
Send me to the right Temko and tell me, a non-Russian Turk (yes, 12.5% ​​is my nationality) where is on your computer shove add RAM ???

PS Well, why have they begun to say to me more often that I'm boring ???
Pakat
ukka, what kind of motherboard is on the computer, what is the memory cost, which one do you want to change? Everything depends on these questions ...
Ukka
Quote: Pakat

ukka, what kind of motherboard is on the computer, what is the memory cost, which one do you want to change? Everything depends on these questions ...

Add memory from one old computer (7 years old) to another (6 years old). If I'm not mistaken, was it called DDR?

You probably need to find suitable connectors on the motherboard and shove them in? Is that all?

The motherboard is a Pentium - not a Pentium?
Pakat
ukka , download any informative program, SIV for example, it will show you which board costs and what type of memory you need ...
Better yet, find someone who will change your memory so that it fits exactly, otherwise you will push ...
Ukka
Pakatic, I have an Intel Pentium 4 with 2.4GHz, DDR memory. In the computer, they gave it away, also the memory of the DDR ... There is a slot for each equipment on the motherboard, right?

I just need to urgently remove the hard disk and memory from the given computer tomorrow, install it on mine, install Windu and AutoCAD (URGENTLY !!!), drive information from the hard disk that I have on my computer on the given one. And give the hard drive that I have now (URGENTLY !!!) ...

Now I understand why they call me boring ...
kubanochka
Quote: ukka


I just need to urgently remove the hard disk and memory from the given computer tomorrow, install it on mine, install Windu and AutoCAD (URGENTLY !!!), drive information from the hard disk that I have on my computer on the given one. And give the hard drive that I have now (URGENTLY !!!) ...

May I intervene? I understand that you need to transfer information from one hard drive to another. Right?
Kamusik
Quote: ukka

Pakatic, I have an Intel Pentium 4 with 2.4GHz, DDR memory. In the computer, they gave it away, also the memory of the DDR ... There is a slot for each equipment on the motherboard, right?

I just need to urgently remove the hard disk and memory from the given computer tomorrow, install it on mine, install Windu and AutoCAD (URGENTLY !!!), drive information from the hard disk that I have on my computer on the given one. And give the hard disk that I have now (URGENT !!!) ...

Now I understand why they call me boring ...

ukka stop swearing! You give out such technologies for the night, go crazy!
Ukka
Kamusik, count up, I need to do it all until 14-15 ...

I would like to remember how this is done ... After all, 8-9 years ago I assembled my computer myself, from components ... But then I knew how, but wait I don’t remember ...
kubanochka
ukka, the memory from your computer also needs to be given in exchange for another?
Pakat
Quote: ukka

I just need to urgently remove the hard disk and memory from the given computer tomorrow, install it on mine, install Windu and AutoCAD (URGENTLY !!!), drive information from the hard disk that I have on my computer on the given one. And give the hard disk that I have now (URGENT !!!) ...

Now I understand why they call me boring ...
Why change memory, install a hard drive on your computer, transfer Windows and AutoCAD if you can ...
Give the old one, with information, or format it ...
By the way, the memory in the old may be worse than yours and incompatible ...
Kamusik
Quote: ukka

Kamusik, count up, I need to do it all until 14-15 ...

I won't even try! For me this is sky-high!
They gave me a disk at work to install the program ... I called the neighbor's kid, and he was so smart ... True, he didn't finish it a bit, the administrator installed the program and finished it all from her computer! In, technology has gone!
Ukka
Quote: kubanochka

ukka, the memory from your computer also needs to be given in exchange for another?
No, I only have a busy hard disk ... (my railway fell down 1.5 years ago, they took it, and now it’s back) And just add memory ... And my brother today gave his old system unit in working order. Current I now have information for 30 Gig, and on my brother's - 20 ...

I don’t want to upgrade my computer, because it’s getting physically worn out ... We have to hold out until Yulia starts a new job and we can buy a laptop ... The model has already been picked up and the price for it is falling seductively ...

And you need to debug both computers ...

Quote: Pakat

Why change memory, install a hard drive on your computer, transfer Windows and AutoCAD if you can ...
Give the old one, with information, or format it ...
By the way, the memory in the old may be worse than yours and incompatible ...

I want to add that memory along the way ... Do not change, but add, for my own 256 MB ...
As for the rest, I planned it, as you suggest !!!
kubanochka
Quote: Pakat

Why change memory, install a hard drive on your computer, transfer Windows and AutoCAD if you can ...
Give the old one, with information, or format it ...
By the way, the memory in the old may be worse than yours and incompatible ...

In the same place, you need not only to install the program, but also to transfer information from your own to a new disk.
1. Change disks.
2. Install programs.
3.Connect the old disk as the second one, for this there is another connector on the bus going from the motherboard to the hard disk, which must be connected to the second disk, supply power (power cord)
4. When you turn on the computer, two versions of Windows will be detected. Select any drive (difference, in this case 0). The other drive will be detected as just a drive.
5. copy the old disk and merge it into the new one.

Do you have 30 Gigabytes of information, and your brother's disk for 20? Then you have to dump some nfu on flash drives. Memory, the one that is DDR, has nothing to do with it. Maybe some programs not to install yet. Anyway, 30 gigs for 20-ku can't be crammed
kubanochka
ukka, I'm embarrassed to ask, which version of AutoCad? With 256 MB of memory - this is a complete brake! For the computer to work correctly, you need the memory sticks to be equal in parameters, that is, the same. What is the memory that the brother gives?
Ukka
kubanochka, Lenchik !!!
Well, you and the head !!!
Mercy !!!

That DDR has nothing to do with it, the current for AutoCAD is good when there is more RAM!

And I will pour the unpushed old information somewhere ... Soon I will send isho 20GB ... With the world on a thread - Olka's comp ...

It just happened, well. they ask back, and Julia was invited to work as a student (read a rough worker) by my colleague-designer. It's a sin to refuse additional practice, for which they also pay !!!

Quote: kubanochka

ukka, I'm embarrassed to ask, what version of AutoCad? With 256 MB of memory, this is a complete brake! For the computer to work correctly, the memory sticks must be equal in parameters, that is, the same. What is the memory that the brother gives?

Two more 256MB ...

And what to do ...

I downloaded 2007, like Julia installed it in winter, worked slowly, but normally ... It will slow down a lot, will do it in Compass, then drive it to Acad ...
kubanochka
ukka, and you are from this computer, which you will disassemble tomorrow, in the network. I mean, when you take it apart, we can communicate? I'll be in touch tomorrow, so we will cope with your problem together
Pakat
ukka, you need to see how many memory slots are on the board.
If the memory is of the same type, say DDR, and not SDRAM, DDR2, etc., then simply install the memory into the available slots.
Memory performance does not matter, it will work at the least.
kubanochka
Quote: Pakat

ukka, you need to see how many memory slots are on the board.
If the memory is of the same type, say DDR, and not SDRAM, DDR2, etc., then simply install the memory into the available slots.

Tomorrow he will disassemble, see what awaits her
Ukka
Quote: kubanochka

ukka, and you are from this computer, which you will disassemble tomorrow, on the network. I mean, when you take it apart, we can communicate? I'll be in touch tomorrow, so we will cope with your problem together

I want to install Windu and Akad on my brothers' computer, when I debug everything, then just rearrange it. and DDR on my own ... So I'll be on the air! Only the brothers will have to connect the computer to the TV set (I did not drag the second monitor).

Throw rearrange w. and throwing off information is a secondary task ...

Lenchik, I hope for you !!!

Well, really, I'm not boring ???
Ukka
Quote: Pakat

ukka, you need to see how many memory slots are on the board.
If the memory is of the same type, say DDR, and not SDRAM, DDR2, etc., then simply install the memory into the available slots.
Three slots, I remember exactly ... I have DDR memory, I also remember exactly ...
Keep your fists for me !!!
Rina
Ol, now I have to go to the garage again and rip off the memory of the old man?
kubanochka
Quote: ukka


Lenchik, I hope for you !!!

Well, really, I'm not boring ???

I will not leave you!
The one who told you this, how to put it more tactfully ... Was wrong
Ukka
Quote: Rina

Ol, now I have to go to the garage again and rip off the memory of the old man?

That no, wait !!!
I think, if Akad slowly but surely worked at 256 MB, then at 256 + 256 it will work too !!!

And I was going to twist adjika tomorrow ...

Quote: kubanochka

I will not leave you!
The one who told you this, how to put it more tactfully ... Was wrong

That even the judge in court hinted when I acted as a technical expert ... And sho I'm guilty, sho the lawyer of the defendant DBN from the fifth time understood the current?
Rina
okay, as Scarlett said, "I'll think about it tomorrow." I went to bed, more in the morning to take little to the clinic, and I am almost unable to get up at half past six.
kubanochka
Quote: ukka

Only the brothers will have to connect the computer to the TV set (I did not drag the second monitor).

What for?!!! While you are installing the programs, connect your monitor
matroskin_kot
Ol, I'll get you and Magadan a lot of spare parts later, you'll get tired of installing. ... All different memories and scrap metal - you can save the whole Bonbu office for the nuclear power plant ...
kubanochka
Quote: Kalmykova

Olka! Those are evil people with envy!

In, in! They, these envious people, are very aggressive. Never mind or lower your self-esteem under the pressure of the limited
kubanochka
Quote: matroskin_kot

Ol, I'll get you and Magadan a lot of spare parts later, you'll get tired of installing. ... All different memories and scrap metal - you can save the whole Bonbu office for the nuclear power plant ...

When you are going to bring spare parts from Magadan, come to Krasnodar to see me, I’ll give it to the second nuclear power plant
kubanochka
Quote: ukka

I will go in a dream to make drawings ... to the atomic bonba ...

You better tell me how I can give you the hard drive. I found it now with old connectors that will suit you for 40 Gig.
Ukka
Lenchik, hello !!!

There are three slots, but nothing, that the native 256MB, and the additional 128 + 128MB?

Helen, and if I'm mine. I will put it as the second, and the brothers as the first (how not to get confused with the stub ...) and Windows on it ... Which Windows will the computer give preference to?
It's just that the cords from the computer to the TV are somewhere in the bag, so maybe I’ll go straight to my brothers’s computer. will put ...
kubanochka
Quote: ukka

Lenchik, hello !!!

There are three slots, but nothing, that the native 256MB, and the additional 128 + 128MB?

Helen, and if I'm mine. I will put it as the second, and the brothers as the first (how not to get confused with the stub ...) and Windows on it ... Which Windows will the computer give preference to?
It's just that the cords from the computer to the TV are somewhere in the bag, so maybe I’ll go straight to my brothers. will put ...

128 + 128 is already a pair, so play it boldly!
On the train. d. brother put a cap like a slave disk (slow master). On each train. can be different. see specifically on the sticker on the disc itself. Further, when booting, the computer will give out that two systems are found. Choose your disc - it is your Master disc. And the brother's disk will be just like a drive. Copy there

Now I thought: you’re going to give away your disc. So after installing on the train. d. brother of programs. Swap the disks in your computer. That is, make your brother's disk "Master" and your own "Slow". And when loading, select the brother's disk.
Ukka
In general, nothing works for me ...

De we have a smiley with a gun ???

Separately connect the brother's system unit - no email. extra cable ...
Together w. are not friends ...
Wait, I'll take off my train. and try to format and install like this.

It seems that there is a program Partishen Magic? ...
kubanochka
Quote: ukka

In general, nothing works for me ...

De we have a smiley with a gun ???

Separately connect the brother's system unit - no email. extra cable ...
Together w. are not friends ...
Wait, I'll take off my train. and try to format and install like this.

It seems that there is a program Partishen Magic? ...

Olya! Let's go in order.
Plug in your brother's system unit (take your cable and your monitor). What system is there? Are you satisfied with the already installed Windows?
Ukka
No, not satisfied ... I already demolished it ... Formatted from the boot disk into two partitions approx. 10Gig ...

Boot disk with XP checked, everything was always OK!

Right now, I'll try to install Windu on my brother's again, but with my own turned off ... It won't work, I'll install Acad on my own, but I'll wait to give it back ... They waited 1.5 years, they will wait another week ...
kubanochka
Quote: ukka

No, not satisfied ... I already demolished it ... Formatted from the boot disk into two partitions approx. 10Gig ...

Boot disk with XP checked, everything was always OK!

Right now, I'll try to install Windu on my brother's again, but with my own turned off ... It won't work, I'll install Acad on my own, but I'll wait to give it back ... They waited 1.5 years, they will wait another week ...

With the first question sorted out ...
Go ahead.
Let yours stay disconnected for now. Put the autocad. Everything will work out.
Leska
A cable from multi will not work? It's just that when they brought me a foreign MV, she had an exotic plug, I took a cable from an old computer ... and now it's all hockey
kubanochka
Quote: Leska

A cable from multi will not work? It's just that when they brought me a foreign MV, she had an exotic plug, I took a cable from an old computer ... and now it's all hockey

It will do, of course! The only problem is that there is only one monitor. Switch anyway ...
Jefry
Quote: ukka

Right now, I'll try to install Windu on my brother's again, but with my own turned off ... It won't work, I'll install Acad on my own, but I'll wait to give it back ... They waited 1.5 years, they will wait another week ...
I understand that you need to turn on two at once to merge information from one to the other?
ukka, put Windows on your brother's computer while yours is disabled. And then it is quite possible to make friends. Do you have two IDE cables (flat wide)? One screw, and the second DVD drive? The easiest option is to turn on the second screw then temporarily instead of the drive.
kubanochka
Quote: Jefry

I understand that you need to turn on two at once to merge information from one to the other?
ukka, put Windows on your brother's computer while yours is disabled. And then it is quite possible to make friends. Do you have two IDE cables (flat wide)? One screw, and the second DVD drive? The easiest option is to turn on the second screw then temporarily instead of the drive.

I already wrote about this to Olya. Now we go step by step Install the programs on the brother's disk. We will get to the connection of the second disk later.
Ukka
Mustache turned out !!!

With my train connected. as a prima, and brotherly - as a second, then I did not want to be formatted, then the fully installed Windows was broken ... I remembered his grandparents, I threatened him hammer Bill Gates ... I had to go and take doping (coffee with cognac and chocolate), not to destroy anything ... Then an educational conversation was held with Zh. etc. - if he, dog, will not contact me, then he will go to the landfill back to my brother ... I calmed down, went into the existing Windows, formatted it as I needed, turned off my train. etc., included brothers as prima and URRRRRYA !!!

Now I will turn on my own as a second and go to install Acad and other programs ...

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers