Choosing a slow cooker, pressure cooker, rice cooker (2)

I won't say for sure, since I ran there, the courts, maybe 15 minutes longer, or maybe more, I don't know.



Lummik 1447. Excellent, especially with a bowl from Stadler.

Yesterday my soup was cooked in the element, the soup was up to the 3-liter mark, cold water, with a piece of beef on the bone, the default soup mode is 60 minutes, I did 50 minutes, as a result, the meat was ready, the bone left, but did not fall apart, in an ordinary multicooker in 50 minutes at maximum load, will it be ready? This is certainly not a classic slow cooker, but not quite a pressure cooker either, although I have an Orsson 5015 pressure cooker and there soup to the eyeballs in 40 minutes, less time is usually not enough.

[Elena Gar]

Elena Gar, but this is interesting, and how long did the program last? I'm wondering if she can adjust the time down if the liquid is low. The cuckoo corrects.

On my program, crumbly cereals, the program lasts 50 minutes, and hung for 10 minutes, on the program, balanced cereals, the program lasts 35 minutes, and hung for 15 minutes.

[Annutka]

in an ordinary multicooker in 50 minutes at maximum load, will it be ready?

Ordinary multicooker, they are heating elements, there only heating to a boil will take 20 minutes .. so it is unlikely. And then there is high-speed induction heating and cooking with a small, but still pressure. This can be seen from the release of steam at the end: it is not the same as, for example, on Ragu, but still there is ..



Annutka, well, that is, while there is experience only adjustments to the larger side. It works longer than stated until everything evaporates.

Lummik 1447

with a non-native bowl is still better .. and dear than not nra?

[Annutka]

Annutka, well, that is, while there is experience only adjustments to the larger side. It works longer than stated until everything evaporates.

Yes, apparently so. Increases by evaporation time.

[Gibus]

Gibushow informative! And you can ask the question, so that everything in your head is already laid out in places where, in your opinion, should Ourson 5015 be carried? His valve is not mechanical, but he cooks it up, it picks up steam like a pressure cooker.

[Tochechka]

Tochechka, the valve is mechanical, since the cover is removable (therefore, the multicooker is not controlled in any way). Pressure cooker.

[Gibus]

Gibus, You are a storehouse of information! Thank you!

mechanical valve

aha means just a different kind of valve, not like Shteba's. And I thought that the mechanical one is as spinning as a float. Oh, well, how much clearer everything has become now, thank you very much!

Natasha, I think that Shteba also has mechanical

But Element, Cuckoo, Bork, electromagnetic.

[Annutka]

Annutka, I realized, I just didn’t know that they are different, mechanical

Look on Chinese sites (I wrote the "Povos Pentium" pressure cooker bowls).

thanks for the hint, it seems it is ...

🔗

[izumka]

on what? So that you can set the temperature manually in 1 ° C steps? And sold in our country?

izumka, but the line of Redmond RMC-M4510 (-1-2-3 the last figure changes) they are in 1-gram increments and the 1st sensor program, switched off by heating and sound. And there are many cups. It seems that there is everything that is needed here Temka only on the 10th, you asked the girls there, why didn’t come up? Or did they take M 381yu?

it seems she is ...

If all sizes match, then try to order. There is a topic about shopping on Taobao here. Maybe it will be more profitable

... and dear than not nra?

everything is in order with the family, too, just plump and heavier from Stadler, and since Lummik works most often, then two bowls are more convenient.

izumka, but the Redmond RMC-M4510 line (-1-2-3 the last figure changes) they are in 1-gram increments and the 1st sensor program, switched off by heating and sound. And there are many cups. It seems that there is everything that is needed here Temka only on the 10th, you asked the girls there, why didn’t come up? Or did they take M 381yu?

Natasha, this is just a slow cooker. And now I want a multicooker-pressure cooker to work both as a multicooker and as a pressure cooker. PM381 has not yet bought, it says on the Rosette - the product is over. On the second day, it appeared again with the inscription "ends", but when I put it in the basket and started placing an order, they again wrote that the product was over. Here is one-on-one when I was choosing the CASO VC 11 vacuum unit! I waited until I appeared and bought it! I have never regretted it, I still think how I did without a vacuum cleaner before? So while I'm waiting, I'm not in a hurry. And my Deksik got scared that I was looking for a replacement and started working (mmm) But I was already tuned in to the pressure cooker anyway!

[izumka]

izumka, they have some new models of pressure cookers of the 400 series, prettier in design and the same functions, but they have a different standard size of the bowl, it was important for me that my old bowls fit, and you can use a new one

[Gibus]

Gibus, I read about her



Gibus, looked at the review about 400.

Does the 381 also have a loose lid so far without pressure? This model is slightly more expensive than the 381, but has a Daikin® Japan non-stick bowl coating. Probably better than 381.

Oh, I read the last pages of the topic and I also wanted to buy something new. Especially induction. It is a pity that the Element cannot be bought from us.

And now I want a multicooker-pressure cooker

really understand. I had the same. Therefore, I bought Orson, but I realized that he could not replace Dexica. Then I could not resist and bought a Panasonic 10 on sale. And now Redika 02 ... And the result is the same, I'm still looking for a replacement for Dex. In it, only the sensory programs remained not kosyachnye, well, so I can not without perfect pilaf on his sensory "rice" Maybe of course it's time for me Just for some reason it seems to me that those speedy from which you choose, Deksika will not replace
Maybe with a dangling lid, this is just a design, it is not fixed yet without pressure, but with pressure it will stop

Does the 381 also have a loose lid so far without pressure?

All pressure cookers without pressure have a slight up and down play on the lid, which is normal. Under pressure, steam will press it up. The steamer is lousy of course .. I use the old steamers from Brand and Cuckoo.
As for the lid mounting bracket, I don't know how durable it is, the 381 has a removable one.
In general, it is clear that the author of the video does not understand the principle of the pressure cooker, so he does not even like the dangling float

It's just that for some reason it seems to me that those speeds from which you choose, Dexico will not replace

I also suspect that the Dexika pressure cooker will not replace you, but it will come in handy on the farm. Take your time, maybe that will turn up at a good price. And, nevertheless, it is convenient when there are many suitable bowls on sale ... I do not know about bowls for 400.

I now want a multicooker-pressure cooker to work both as a multicooker and as a pressure cooker. PM381 has not yet bought, it says on the Rosette - the product is over. H

Raisin, looked into the topic by accident. I didn't track her at all, so I don't know what was discussed here ahead. But I read your last message.
Have you considered the new Dexica? I myself am looking at it, but so far I can not take it, only with my dough mixer I fully paid off. But on March 8 I am already looking at him

🔗

Today I looked, the price for it was again set the same as the original one. Was 100 UAH more expensive.
It comes in 2 flavors. This one, 61st bronze, and 60th - stainless.

Have you considered the new Dexica?

Dexes have long been produced at another plant, after the 60th, not all programs work correctly. Feedback on this SLE, you have to look here, someone will respond. Maybe she's normal.

Have you considered the new Dexica?

It has a temperature step of 5 degrees, although from 30.And izumka wanted a 1-degree step.

Have you considered the new Dexica?

It has a temperature step of 5 degrees, although from 30.

First of all I looked at dex_dpc_61! But I really want to change the temperature with a step of 1 degree




I'll wait a little longer, since my Deksik has earned, maybe a new one will appear at an adequate price

Dexes have long been produced at another plant, after the 60th, not all programs work correctly. Feedback on this SLE, you have to look here, someone will respond. Maybe she's normal.

I have a Dex 60 since I was 12, and also a worker. Therefore, I was somehow little interested in all the other Dexes. But I heard that the programs released later are buggy. But I would like to hope that this new multi-cooker pressure cooker will meet expectations.
Condemnations for her began here Dex pressure cooker DPC-40 # 1445
But then they died out. Should the girls who bought it try their impressions?
A temperature step of 1 degree is generally a dream! But we have little executable

A temperature step of 1 degree is generally a dream! But we have little executable

Nelya, I have a step of 1 degree in Vitek, starting from 30 degrees.

Sveta, we're talking about a pressure cooker

[Nelya]

Nelyathen oh.

I have a step of 1 degree in Vitek

and what kind of Vityok do you have? I am just such multi interests.

[Tochechka]

Tochechka, I have 4212, but my own cup is very bad. I bought from Redmond with a Greek ornament, it is a couple of mm higher, but this is not critical, the lid closes.

I have 4212

thanks, I'll go and study

[Ofeliya]

something, too, so wanted to buy a new one. Especially induction

Ofeliya, I read your topic about Moulinex MK805E32, which was sold. I look again, want induction, so did you disappoint with a particular Moulinex? I just went shopping today to touch everyone with passion and I was very impressed by the Mulinexes (which are Tefalki in Russia) and in particular the induction one. Now do you regret giving it up?

[Tochechka]

Tochechka, Natasha, I don’t miss Moulinex. Something didn't suit me there. Maybe I got such a copy. But then I did not feel all the described charms of induction. And I want to. Now I again look in their direction. Taking the same one again doesn't seem to be serious ... Although ...
Caught my eye Bosch MUC48B68RU... No one accidentally had any experience with this model?

[Ofeliya]

Ofeliya, Olga, I have a Bosch multicooker, not induction, but I like it very much, the programs are fine-tuned, the milk porridge program is excellent, the only thing I had no luck with a valve or something with plastic. As it heats up, the valve opens. But maybe this is my copy. According to the programs, with all my multicooker fleet, the most successful (for me).

Caught the eye of Bosch MUC48B68RU

Yesterday I turned it in my hands in Comfi. The saucepan is heavy and so shiny chrome-plated on the outside, the shape is not quite a bun like a mulek, but the walls are not quite straight, well, in general, pretty and so small as for induction. There was an induction Bork next to it, so it is much larger, and as I understand it, it is with the Element in the same size. I'm still thinking about the Element, there is still an opportunity to buy it, but there are still problems with the lid from all parties, judging by the reviews on the Yandexmarket, it's just that someone immediately bursts, and someone in a year ...

[Natasha]

Natasha, Natasha, before the rim on the lid was plastic, but now it is metal.

the rim on the lid was plastic

It's on the inner lid where the silicone is attached, right?

[Natasha]

Natasha, and I have induction tefal, I just trudge from it, I have a lot of multitvars, but he is one of my favorites, by the way, I liked the cereal tefal less.

[Sedne]

Sedne, Svetlana, so after your reviews about Tefalk, I thought that maybe there was something wrong with my copy of Mulinex. They're the same. They differ only in name. I don't know anything about Bosch. I'll have to go and feel it too.
Annutka, and how does the valve open? Doesn't pop out, but into pieces?

[Sedne]

Sedne, and while I have the flour of choice, I also thought about cereal tefal, and felt all the tefali-mulinexes, they are so cool, ... but the Element does not go out of my head, and I started reading foolishly about the multi-body

[Natasha]

Natasha, it's good that the Element does not shine for me, otherwise I would also suffer.

Annutka, and how does the valve open? Doesn't pop out, but into pieces?

It opens like a book. Apparently the plastic heats up and the latch does not hold. The husband said that it’s okay, you can do it.

Quote
Search Chinese sites
so I, out of curiosity, also climbed onto Chinese sites there is FSE and all the familiar faces are multi, and the prices ... how many Povos do only at this plant, and Fili, and Branda, and Toshiba with a round pot, (under other names of course) and all sorts of pressure cookers, and replaceable pots ... we have a lump for them of course mercilessly

How to see what is being done at the Povos plant?
Can you give a reference?
And then I was looking for this plant and does not find a search for me.

Bosch MUC48B68RU

saw many good reviews about this pressure cooker, but the price is not at all reasonable with her.

what is the Povos factory doing?

I am also interested in this and how not to get confused in Chinese characters.

[Vika]

Vika, this is not a pressure cooker. Although they have it. I was interested in the induction multicooker. Something I still don't understand, whether I need induction ...

[Keti]

Keti,Mirabel, girls, on completely Chinese sites without the Russian language, I also do not focus on Korean either, but I'm probably sorry

On these pages enter in the search bar "Povos"
it's multi - 🔗
these are the bowls and everything else - 🔗
if you suddenly wonder about the Korean platform - 🔗
delivery is paid everywhere, this is probably profitable when buying together

Good afternoon, tell me which multicooker up to 5 thousand is better to choose. I can’t decide which is better to take from these models redmond m90, marta 1980,1984, 1988, 4315. Or maybe there are still some options?

For 5530 rubles you can buy MV-SV Element, Bork and Cuckoo levels

🔗