Kenwood kitchen machine: working with attachments

[Brillante]

Brillante, and where can I read about this promotional code for the attachments?

Code egordarit

Code egordarite

It's just that he doesn't have a word about it on his website)

It's just that he doesn't have a word about it on his website)

I was looking for any discount code for the cover and by typing. 2 attachments-20% discount, 3-30%, and 4 and more -40%



Can't find adapter for new attachments :(

[Brillante]

Brillante, Thank you!)

Can't find adapter for new attachments :(

From the old model to the new ones? 🔗 Not she?
However, there is in the other direction. Not too cheap, but if need be ...

Buy KENWOOD KAB 992 PL-sieve for wiping

[NV]

NV, yes, everyone will buy, but gle ???

A little slowed down with the processor. Kenwood KAH647PL is the same to KCC9040 for high speed socket? For some reason, in the German Amazon it is written that with the series the chief and the major. It seems that I have already read everything a hundred times, but I slowed down. Or is it just that the new processor is put on a high-speed socket instead of a medium-speed one?

[Brillante]

Brillante, Tatyana, the action with discounts on the nozzles was up to 31.08, you will specify. blogging promo code usually gives something only from himself

[Brillante]

Brillante, Tatyana, the action with discounts on the nozzles was up to 31.08, you will specify. blogging promo code usually gives something only from himself

I ordered it yesterday with this code, a -40% discount, they will bring it today. And now I see they have an adapter for new nozzles, but with the code it only throws off 50r. and makes free shipping.

[Irlarsen]

Irlarsen, the nozzles for the high speed slot are the same for all Chefs. And Majors, and Induction, and those that are smaller.

Here you go! My handsome man is in the garage of a friend! Since I'm afraid they will be kicked out of the house, I plan to replace the old one in the kitchen with a new one when my husband leaves on Monday for a few days. I am sure that if you don’t shake the boxes, my peasants will not notice the substitution.

Here you go! My handsome man is in the garage of a friend! Since I'm afraid they will be kicked out of the house, I plan to replace the old one in the kitchen with a new one when my husband leaves on Monday for a few days. I am sure that if you don’t shake the boxes, my peasants will not notice the substitution.

Class! I, too, will gradually carry my nozzles home. The sieve is already at home, there is a multi-shredder, a juicer, a citrus press and a cover to drag.

kill myself from you girls !! Well done

Here you go! My handsome man is in the garage of a friend! Since I'm afraid they will be kicked out of the house, I plan to replace the old one in the kitchen with a new one when my husband leaves on Monday for a few days. I am sure that if you don’t shake the boxes, my peasants will not notice the substitution.

Ahh, Irina, bravo! Mine, even with the presence of a box occupying a quarter of the free space in the room, did not immediately notice.
And she changed Kitchen for Kenwood. Stands and stands on the countertop. Harvester and harvester.

Thank you girls! It's so nice when here we understand each other! In a real environment, friends just don't twist a finger at their temples

Ahh, Irina, bravo! Mine, even with the presence of a box occupying a quarter of the free space in the room, did not immediately notice.

I so slowly trained that all free horizontal surfaces are occupied and nothing.

And changed Kitchen to Kenwood

I'm wondering if mine will notice if I change Bosch to Kenwood.
So I started with everything from afar ... Congratulate me, I bought a sieve. True 992, but it's not scary. If it does not fit, I will buy spare parts. Reading you, I thought that I also need a sieve.I want a car for 6.7 liters. Only until the induction has not decided or not

Lord, with rare exceptions, all men are the same. When, a very long time ago, I bought a cache, I had to say that the patient had given her daughter. And I met a courier with a vacuum cleaner on the street. They'll blurt a little, and then everyone's great. We make our work easier with our gadgets. Many women feel sorry for the money for all this, because they don't really prepare anything special for it. And we spoiled our delights.

[Rita]

Rita, but where do you buy buy me someone, I will pay for the shipment, of course ...

[Rita]

Rita, but where do you buy buy me someone, I will pay for the shipment, of course ...

🔗 There is also a 930th sieve for 11000

🔗 There is also a 930th sieve for 11000

Already over 6 ...

Already over 6 ...

Ah, no, already over 12. It's 992 for 6

Well, the prices ..

Only until the induction has not decided or not

Yesterday I knocked down the butter from the cream, washed it right in the bowl and heated it in it))
If possible, take induction. I'm not a cook either, but I use it periodically, it's very convenient.

🔗 There is also a 930th sieve for 11000

I also bought from this seller. I sent it lightning fast with a prepaid CDEK.

[Irlarsen]

Irlarsen, Ira, bought ?! Which one? Congratulations! Let it bring only joy! It's so comfortable and good with him! I've already got used to Kesha for a year, it seems that he was always the only one)). Daughter nevertheless decided to take induction, but a little later - the furniture had not yet been installed, including the kitchen ((. Hands are itching to try Her built-in appliances (especially the oven), but everything is still in boxes ((For the kitchen, such They paid for the money, and they (the company) pull everything with the installation ((. Today Kesha kneaded Schwarzbrot bread for me, baked it in Kuzin. Here's a photo I brought you - the cut came out badly, cut quite hot (guests arrived, I had to cut it on the table). But delicious!

[Prus - 2]

Prus - 2, Lyuba, Thank you for your congratulations! I bought 9040S. I think it's a success! I almost had the game to buy cheaper. Monitored Denmark, Germany and Italy! I myself am in Denmark and we give a 10-year warranty on the motor, but I was ready to buy cheap from other countries. As a result, a message about a discount in his native Denmark for 9040S came out yesterday. In rubles, only 52 thousand !!!!!! I paid with a Russian card! And how I bought it is generally a song. I decided to go myself (to pay with a Russian card, it does not work on the Internet), I come and say, they say, Kesha to me. The answer is, a consultant will come up now. Comes, I say, they say, you have a special offer today, answers, yeah, and shows something completely different. I say no, I'm a 9040S. The answer is strict and concise. There is no such thing on sale. I say yes, the answer is no! Well, let's go, I say kindly, let's go to the computer. I had to show him where and what to type! We did it, we found it, we have it! Seller, AAAAA! we do not have it in stock! I say there is! I checked! No, he says no! I had to show him again on HIS computer where to press! I was sincerely surprised and crawled to the warehouse! Bring it !!!!! God, what idiots work in stores!

[Rita]

Rita, but where do you buy buy me someone, I will pay for the shipment, of course ...

Olya, I bought a display case in Astrakhan, in mvideo. 3500 - 1000 coupons, for 2500 it turned out.

If there were more, I would have bought, I know that we all need everything here, but there are none more.
It was we who were going on a fishing trip, I issued it from home, persuaded my husband to stop by. With difficulties! Only he does not know that this is a nozzle for a combine, which is not yet available.

[Ira]

Ira, well, you have an adventure)))! Just a detective! And you built this consultant cool))! And the price is great! Congratulations again - Kesha, this is a Song! May it bring much, much joy! Soon the stove is stollen, the volume is what you need! Before Kesha, for Christmas and Easter, I was so bored with a lot of dough ((, and with Kesha - just playfully)). And in all other respects - a miracle machine! What attachments do you already have?

[Lyuba]

Lyuba, There is a SITO (this, the one I already talked about, which lay for a long time, the box turned yellow, for 300 rubles), a meat grinder and a citrus juicer (all together for 2 thousand rubles). These are new, unopened from a closed store.
I'll play with what I have, and I hope to bring the rest from Russia in March. Surely there will again be somewhere 4 pieces with a 40 percent discount.

Where is the best place to make juice from grapes, if it has seeds? There is a press for berries, it says seedless grapes and in auger too :(

[Brillante]

Brillante, Tatyana, I don't have a screw nozzle yet, but in fact the screw juicers should squeeze grapes with seeds. Manual squeeze from me only on the way. I think they just insure. It should be strong for pitted grapes to avoid burning. But at kenwood the power is heaped up. Try it a little, without fanaticism.

I tried to squeeze juice from grapes and pomegranates using both a screw (Hurom) and a centrifuge and I didn't like it. The auger "gnaws" the bone, and the centrifuge "rubs" it and the juice is very tart. I haven't tried it in the press for berries, but there is a risk of damaging the mesh with seeds.

Surely there will again be somewhere 4 pieces with a 40 percent discount.

I don't know about March 2020, but now this promotion has been extended until the end of the year, the promo code depends on the promoter, but the essence is the same.
about the cost - if you take the same 9040S with two nozzles as a gift (for example, a set of dough rollers and a screw juicer), the output will be approximately 75 - 15 - 10 = the cost of the machine itself is about 50 thousand.
there is also a credit life hack, but this is a completely separate topic

Can you please tell me if a check is issued when registering a car with delivery and payment upon receipt? Or do they send a check to the post office? Am I thinking of actually demanding a check from Carter or not? The Kenwood manager (official website) tells me that the check will arrive in the mail within 24 hours after signing the acceptance certificate. There will also be a warranty card, but not completed. Is this the norm?
Thanks in advance for your answers!

I cannot attach the adapter to the auger juicer, the pin interferes

Where is the best place to make juice from grapes, if it has seeds?

I tried it through the auger (Khurom) - the juice from store grapes was not very tasty (most likely, what the source material was), from my grapes - much tastier, but we have little of it this year. I ground the bones. There is no press for berries.

about the cost - if you take the same 9040S with two nozzles as a gift (for example, a set of dough rollers and a screw juicer), the output will be approximately 75 - 15 - 10 = the cost of the machine itself is about 50 thousand.

Eh, at least once would make a discount on the car itself 40% without attachments

[KatrinaKaterina]

KatrinaKaterina, Katya! How right you are! But they have a different policy. Sell ​​nozzles.
It's a shame, you know !!!

Eh, at least once would make a discount on the car itself 40% without attachments

I'm even interested in foreign experience. Do they also sell with the same discounts, or is everything only at full cost, the maximum is to catch what is stale at sales?
(if you take into account the full cost, then 2-3 any nozzles as a gift are already quite fabulous)

I cannot attach the adapter to the auger juicer, the pin interferes

figured it out

I'm even interested in foreign experience

I'm telling you. In our country (Denmark), besides this, according to the same scheme, I follow the prices in Germany, Italy, France and Great Britain, it happens like this. There is a website where you can see a summary of offers from all stores. In addition, it is fashionable to find out how the price has changed over the past year. Specifically, according to Kenwood, I saw that the device itself changes the price often. In Denmark, it was 9040s in the store that dropped 2 times from 74 thousand (for simplicity, I write in rubles) to 49. In Germany, the price dropped to 9060 and 9048, Italy only 9048. In England I did not like the prices at all I was sitting in the bushes and waiting ... You can set an alarm and you will be emailed. I almost bought 9048 once, then almost 9060, but in the end I bought it for 54 in Denmark (alas, the bank re-read 52 thousand for 54 in a couple of days). I couldn't wait for a further decline! Who knows whether it will be or not. plus we have a 10-year warranty on the motor and I was able to pay with a Russian card. I think the purchase was successful !!!!!

Nozzle prices do not drop more than 5 percent here and there. I did not find any offers for the type of 4 pieces with a 40 percent discount. I'm taking you from Russia !!! It remains to decide which ones.
Who will advise what? I have a grinder, sieve and citrus press

Who will advise what? I have a grinder, sieve and citrus press

You need to decide what you are doing
I recently got a car, the following are popular: grater KAX643 and multi-shredder AT320A, followed by rolling dough (they took a set of three - MAX980), auger juicer KAX720 (apple season - a liter of juice is made easy and pleasant). In a blender, the kids made a milkshake yesterday. Bowl for ice cream in the freezer, today I will try Meat grinder until I used it, there was no case. Suddenly I realized that I did not use the KAH647PL food processor at all, since I often use a grater, perhaps the processing volumes are not the same.

For the future (if we take 4 nozzles) I am actively thinking about the KAX400PL cube, KAX910 curly pasta (through it you can also bake a certain shape using the AT910014 disk), a ravioli nozzle (not yet on the market, they promise to bring it out by the end of the year, the same as the original Marcato or KitchenAid), but further - the question, I do not see the need for the rest. Vegetable cutter AT340 for "wholesale" blanks (in fact, the disks of the KAH647PL food processor can handle this), the KAX941 mill (I don't see the need at all), the KAH740 smoothie (the same blender, only the bowl is immediately ready to "go out" with you), in the end, the cover is the same "attachment" from the point of view of the store

PS. Danish kroner> rubles are easy to count, * 10 and bring everything in a sieve in exchange for other nozzles, they say in Europe it is not such a problem to get it

[conf]

conf, that's just about the grater. Are you happy with low speed? I've met the opinion here that rubbing slowly and high-speed is better?

[Irina]

Suddenly I realized that the KAH647PL food processor

Wow ... And I, without him, as without hands)))

Who will advise what? I have a grinder, sieve and citrus press

Irina, I would take a cube, pasta, if there is no pasta machine, rolling and something else, a thread such as cups, for example. Better a food processor
The low-speed one is lying around with me. Not using
But, as they say, all markers are different in taste and color (c)
So here you need to focus on your needs more.

[Irlarsen]

Irlarsen, there are nuances. Rubbing cheese, carrots - everything is fast enough, BUT ... in order to shake everything out of the drum, you need to remove the nozzle, plus the nozzle itself is high enough - it's good if you rub it immediately into a high bowl, in a low dish there is a risk that the shredded item will fly all over the table. In the high-speed AT340, the exhaust is directed downward and is located quite low - in theory, there is no risk of throwing the shredder (I remember the opinion that due to the proximity of the exhaust to the body of the machine it is also necessary to pick up dishes, but IMHO this is already a lesser evil).

ZhanikThe funny thing is that my husband bought this car just because the old food processor (Bosch food processor) ran out, some gear broke, and here such an irony of fate is that the attachment for which everything was bought has not yet found use. But yesterday I suddenly realized that the shortbread dough is smeared with a hook on the walls and does not mix, I am actively thinking what to do next time - with a K-attachment or in a food processor.

[conf]

actively thinking what to do next time - with a K-attachment or in a food processor.

conf I do K-shkoy. Something in the food processor did not work for me (

At the high-speed AT340, the "exhaust" is directed downward and is located quite low - in theory, there is no risk of throwing the shredded

There is a risk. What another. And disks on it are more difficult to change than on a food processor.
High speed is good for workpieces. But in the absence of a food processor at the dacha due to a malicious toad, I use it there instead of a processor. Although the machine is lower there, because it is not induction. All the same, you have to fence a garden so that it does not fly in all directions and the contents do not fall out where you do not need

actively thinking about what to do next time - with a K-attachment or in a food processor

Something in the food processor didn't work out for me

It depends on what recipe. If the shortbread dough is chopped, when it is very cold, a fairly hard butter is chopped with flour into crumbs, and then a minimum of cold water / milk / eggs is added, then it is better for a food processor to find something - a minute, and the dough is ready, it remains to stand in the refrigerator ...
And if the version of shortbread sugar, when first the non-solid butter is ground with sugar, and then everything else is added and kneaded, then either a k-nozzle, or first flexi (grind butter with sugar), and then - the more convenient: k-shka, hook.

[Irlarsen]

Irlarsen, Ira, I have the most popular ones - a food processor, a meat grinder, a dough sheeter, a cube cutter. Less often - a blender, for citrus fruits, a sieve (in berry season), a mini chopper. The low-speed one is generally lying - I tried it a couple of times, I did not like it. A second bowl (and sometimes a third) is also very much needed. I didn't even think about taking juicers - there is an excellent separate Panasonic. Spiralizer bought a separate one, also Kenwood - played around and worth it. For smoothies - it's much easier to use a blender, well, this canoe with two glasses is not worth the money. At home I have a whole arsenal of excellent metal large thermo glasses, I prefer to use them. I don’t make blanks, so there’s no need for a high-speed grater / shredder, as well as a mill (there are always any kinds of flour in stores), an ice cream maker (I just bought a separate bowl, and if we take it, then a freezer), pasta (excellent Italian pasta is always there in the shops). Here is a raviolnitsa when it appears on sale - you will have to look, if without dancing with tambourines - I'll take it. NatalyaBThank you very much for the recommendations on the shortcrust pastry! I will definitely use it!

[Prus - 2]

Prus - 2, the essence of the ravioli attachment is the same as the original device: (I can't link), the YouTube identifier is "w-2FKjM2fh0", or "marcato ravioli"
rolled out, laid in the middle, put in a separator, put in the filling, turned on, at the exit we divided the ravioli piece by piece (the dough is cut on the drums) - ready for heat treatment!
As I understand it, Kenwood is now using cooperation with the Italian company Marcato for dough rolling, etc. (judging by the similarity of design, functionality and the inscription "Made in Italy")