Multicooker DEX DMC-50

[Daffi]

Daffi, and you didn't fry in it before? If you still fried, then you need to give 5 minutes to cool down a little.

That's it, I'm already with a multicooker! Thank you for your warm welcome and congratulations!
Stuffed hearts - Does not boil over, stews with small gurgles ... The husband now and then spies on the cooking process And the aromas ...
What is most interesting, before, to prepare this dish, I used 2 utensils (frying pan + saucepan), and even a stove + oven. And here everything is in one! And the power consumption is less! Is it a joke - either warm up one device, or drive an electric stove with an electric oven

In short, I'm the happiest elephant in the world!

PS: after frying, so as not to wait until it gets cold for 5 minutes, I poured boiling water over the hearts and immediately stew. Everything worked without stopping

[Daffi]

Daffi, and you didn't fry in it before? If you still fried, then you need to give 5 minutes to cool down a little.

I fried before stewing, but this does not matter, because the cartoon cooled down while I put the rest of the food in it. If, after frying, you turn on extinguishing, the cartoon will start beeping and the Extinguishing mode simply will not turn on.
My situation is different - the Extinguishing program turned on, ran for 5 minutes and switched to automatic heating. This obviously worked some kind of protection, probably the cartoon decided that all the liquid had boiled away and went out

That yes, the Extinguishing mode is so mysterious. I just decided to cook jam in a cartoon. She put out the apples, whipped them with a blender, loaded them into the cartoon to the eyeballs and tried three times to turn on the Stew. But no. In no way, as I did not persuade her. I had to cook on the stove.

oh, no need to cook thick, such as eggplant caviar, in the stewing mode. It gurgles, the whole lid got splattered and the valve clogged.

[heating]

It also happened to me that it would work for 5 minutes on extinguishing and go into the mode heating... Why this is so, I still don't know. Already I think what power surges can? We have a current regulator, we have it on the gas boiler, so it can be seen from it that the voltage jumps, that mom does not cry. Maybe the truth is the whole joke.

[heating]

It also happened to me that it would work for 5 minutes on extinguishing and go into the mode heating... Why this is so, I still don't know. Already I think what kind of power surges ??? We have a current regulator, we have it on the gas boiler, so it can be seen from it that the voltage jumps, that mom does not cry. Maybe the truth is the whole joke.

I don’t think so. Just the same thing is in what is in the saucepan.

oh, no need to cook thick, such as eggplant caviar, in the stewing mode. It gurgles, the whole lid got splattered and the valve clogged.

I made zucchini caviar, there was also a lot of it, but if my memory serves me, nothing really got stuck.

I first laid out the vegetables in layers: eggplants, onions with carrots, minced meat, bell peppers, etc. repeatedly. And it began to turn off, and when I mixed everything after the Heating mode (which heats up), the Extinguishing turned on and continued to work without problems. After 20 minutes I had to turn off the Extinguishing, because everything was already ready.

The Dex 50's biggest flaw is that it is impossible to set the time less than an hour in the Extinguishing mode. Everything else for 5+

Who saw DEX-50 in Moscow? I see such a picture that this cartoon is a pretty face, only in Ukraine. And I, too, have long dreamed of her.

Who saw DEX-50 in Moscow? I see such a picture that this cartoon is a pretty face, only in Ukraine. And I, too, have long dreamed of her.

Dex is not for sale in Russia, only in Ukraine, so come and buy, you are welcome

Thanks for the answer! I'll think about what I can do.Thank you for the invitation, but you yourself understand what it means to go so far for a slow cooker. And so I want her !!! It seems to me that she has the most positive reviews and she is so cute!

[VS NIKA]

VS NIKA, Morphy Richards is a complete analogue of our Daxik and in Russia it seems to be there, look.

Thank you! I tried to find, but so far I have not succeeded,: girl_cray: the product is not available for sale, so they write.

Girls, tell me where to buy another Dexa-50 saucepan?

: hi: I saw on the official site DEX, there are two multi and a saucepan.

[Ira,]

Ira,behold 🔗 and so
🔗product / dmс1050

[VS NIKA]

VS NIKA, check out this spam SuperChef.

Good! Thank you!

girls, thanks

: hi: I looked, but it probably can only be ordered from China.

Duffy urgently look in PM

Well, I was left without my favorite multicooker. I was orphaned. They took her to the service center, they said start calling in a week. Who will eat and cook for me

Well, I was left without my favorite multicooker. I was orphaned. They took her to the service center, they said start calling in a week. Who will eat and cook for me

What happened? And where did you find the service center? There was no such thing in Ukraine.

Well, I was left without my favorite multicooker. I was orphaned. They took her to the service center, they said start calling in a week. Who will eat and cook for me

I sympathize, since I, too, without this beauty, cannot find it on sale in Moscow and there are no analogues.

What happened? And where did you find the service center? There was no such thing in Ukraine.

Dex's website has the coordinates of service centers 🔗

========================================

active links to third-party resources are prohibited

you can buy a saucepan in the online store 🔗 the price and the phone are all there

Today I bought myself a dex -50 multicooker, I'm happy now I have it and a clathronic rice cooker. I am very satisfied. I recommend to everyone.

Please tell me where you bought it. In Ukraine or ....?

I bought it in El. the world in December and stopped working yesterday. Today I took it to the online store, and they told me to contact their service center. And there they checked it and said that they would send it to the supplier. The lower ten stopped heating. Yesterday I started to light the onions for the omelet, but she just started heating and passed out.

Oh, duffy, I forgot to say. The numbers you gave me yesterday. I called: so now it turns out that there are now 2 types of guarantees for the multicooker, and a book such as my half A4. So in mine there are no tear-off coupons for repairs. Therefore, I was told they are not being repaired, but the current is being changed, and there are tear-off coupons in the books - they are rented. This is what Vescom answered me

I bought a cartoon in Kiev 610 UAH tomorrow and a saucepan will bring 192 UAH

Oh, duffy, I forgot to say. The numbers you gave me yesterday. I called: so now it turns out that there are now 2 types of guarantees for the multicooker, and a book such as my half A4. So in mine there are no tear-off coupons for repairs. Therefore, I was told they are not being repaired, but the current is being changed, and there are tear-off coupons in the books - they are rented. This is what Vescom answered me

Do not confuse the people Dex multicooker under warranty does not repair at all, they are changed, this information is on the Dex website.
Only some large household appliances are repaired, everything else is changed.

Do not confuse the people Dex multicooker under warranty does not repair at all, they are changed, this information is on the Dex website.
Only some large household appliances are repaired, everything else is changed.

This is exactly what I had in mind when talking about service centers. When the Dexes appeared, many of them were avoided due to the lack of the possibility of repair. And according to the link that you gave me, there he writes, why I need it, I already know.

Duffy, I'm not scared, I relayed a conversation with a service representative. The most interesting thing is that when I brought it to the service center, the side shades began to warm up, but the lower one did not warm up

Duffy, I'm not scared, I relayed a conversation with a service representative. The most interesting thing is that when I brought it to the service center, the side shades began to warm up, but the lower one did not warm up

And your liquid could not get down? Maybe she would dry up and start working again?

No, I couldn't. The pot was dry in the pressure cooker when I started frying. And at first she began to warm herself somehow. 5 minutes ten warmed and then stopped ?!

I had a similar experience with Polaris 506. BUT it was on the 12th day of purchase and in the store, her poor fellow, was taken without any problems.

Duffy, I'm not scared, I relayed a conversation with a service representative. The most interesting thing is that when I brought it to the service center, the side shades began to warm up, but the lower one did not warm up

Hello! I haven't written here for a long time. You know I have been using a multicooker for a long time. We cook everything in it and without any problems. Describe on the forum about recipes and dishes somehow there was no time, and .... well, in short - I'm a man. Do not judge strictly.

And this accidentally came to see. As I said before, my friend is connected with Dex. In short, Irinasan, don't worry, if you have problems with the service, please write to me in a personal message. I promise to help! (even in Kharkov). Since my friend said that there are no problems with the replacement and repair of Dex, well, maybe it will take a couple of weeks to wait, well, we have such bureaucracy everywhere. There is only one caveat, if there is external damage and something has flowed inside under the heating element, and they can refuse. But these are the rules of the guarantee. But I will repeat - I will help, if anything.

Hello! I haven't written here for a long time. You know I have been using a multicooker for a long time. We cook everything in it and without any problems. Describe on the forum about recipes and dishes somehow there was no time, and .... well, in short - I am a man. Do not judge strictly.

And this accidentally came to see. As I said before, my friend is connected with Dex. In short, Irinasan, don't worry, if you have problems with the service, please write to me in a personal message. I promise to help! (even in Kharkov). Since my friend said that there are no problems with the replacement and repair of Dex, well, maybe it will take a couple of weeks to wait, well, we have such bureaucracy everywhere. There is only one caveat, if there is external damage and something has flowed inside under the heating element, and they can refuse. But these are the rules of the guarantee. But I will repeat - I will help, if anything.

Dear man! Could you help me too. I can't buy either Dex 50 or Morphy Richards in Moscow. Can you tell me how you can place an order in Ukraine. Thank you.

Dear man! Could you help me too. I can't buy either Dex 50 or Morphy Richards in Moscow. Can you tell me how you can place an order in Ukraine. Thank you.

I think that you need to negotiate with someone from the forum or ask. You transfer the money, and you will be sent a multicooker by mail, or by train through a conductor. In short, as you agree!

I think that you need to negotiate with someone from the forum or ask the administration. You transfer the money, and you will be sent a multicooker by mail, or by train through a conductor. In short, as you agree!

Thank you! I try.

AlexR, thank you very much for your help. If necessary (it would be better of course not needed) I will definitely contact you.
Nika, maybe you have someone who lives in Belgorod, then I could buy and deliver to the border.

[VS NIKA]

VS NIKAmaybe we can help each other) I want to buy Brand 37502, but they are sold only in Russia. True, they will appear on sale only in October. If Dex is not burning for you, I can buy it for you here, and you can buy me Brand37502. Only now I have not yet figured out how to send it all to each other ...

: hi: YES !!! You know, I'm also waiting for Brand 37502 and most likely I will buy this multi. But Dexica would not refuse either. So let's think about what to do. Then write in lch. There is another question.why did you also decide to buy 37502 and not 37501? I personally think that there is no need to rush with the 37501, since the new model, and the 37502 should be with corrected errors, this is my opinion.

I already have Dex 50, I'm happy) But I wanted to say more. normal porridge, yogurt (so as not to buy a yogurt maker separately - and so there is nowhere to put the appliances in the kitchen). But I chose 37502, and not 37501 because 37502 has less power, and with the current rise in prices for e-mail, I can't save enough money And the model already, I strongly hope so, with the corrected sides - you won't have to worry about finding out - is it milk porridge or steaming and pilaf in it is a separate program - I don't want to arrange dances with tambourines, I want it to be there by itself ...

: hi: Everything is clear, let's wait for Brand and think about what to do next. Victoria.

[AlexP]

AlexP, in vain you said that you are a person close to the Dex company - now I will throw questions at you

1. What to do if the Dex multicooker breaks down after the end of the warranty period? After all, it turns out that there is no one to repair them.

2. When steaming, the "glass" begins to fog up from the inside through which the clock is visible. This was not the case before. After the end of cooking, the condensate has dried up and the cartoon continues to work, but, as they say, "the sediment remains." What to do - use it further or drag it to the service?

3. Find out from Dex's representatives why the cartoon turns off five minutes after starting the Extinguishing program. I understand that some kind of sensor is triggered, but I don't understand which one and why. Here is a summary of the problem https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=89830.0

4. The multicooker is sorely lacking a drip tray, all excess moisture drains into a depression that goes around the perimeter around the saucepan. I am always afraid that the water will overflow the "moat" and leak onto the heating element. And there it is not far from the breakdown.

5. On the Quenching program, you need to give the opportunity to set the time for less than an hour, I really miss this. On this program, I constantly stew vegetables, they are ready in 25-30 minutes, I have to monitor and turn off the multicooker manually. Inconvenient.

Nika, maybe you have someone who lives in Belgorod, then I could buy and deliver to the border.
[/ quote] Just saw an appeal to me. Thank you very much for such responsiveness !!! But, I have no one there, but what a pity. But thanks again !!!

On the Quenching program, you need to give the opportunity to set the time for less than an hour, I really miss this. On this program, I constantly stew vegetables, they are ready in 25-30 minutes, I have to monitor and turn off the multicooker manually. Inconvenient.

It seems to me that this has already been discussed, then I will repeat. It is convenient to limit the EXTINGUISHING program or unnecessary HEATING by an external timer. The simplest and cheapest mechanical one in COMFI is (about 30 UAH), here is something similar 🔗 You can also buy electronic quirks, but already somewhere for 100 UAH.

It seems to me that this has already been discussed, then I will repeat. It is convenient to limit the EXTINGUISHING program or unnecessary HEATING by an external timer. The simplest and cheapest mechanical one in COMFI is (about 30 UAH), here is something similar 🔗 You can also buy electronic quirks, but already somewhere for 100 UAH.

Thank you, I know there is such an option. But I would like to buy a Dex in a few years, in which it will be possible to set a convenient time for me right away in the Extinguishing program, well, why don't I dream Especially since the American analogue already has such an opportunity