Choosing a slow cooker, rice cooker (1)

[-SR-TMH18LTW is her husband's comment on the repair of this beast, it's about choosing a multi!]

It should be noted such aspects as:
1. Simplicity and fairly high reliability of the MV design.
2. Relative ease of assembly / disassembly and maintainability. For disassembly, it is enough to unscrew two self-tapping screws - one under the condensation container, and the second near the plastic bottom on the side surface. Next, gently pick up the metal shell of the case with a thin screwdriver and release the plastic bottom. Having unscrewed two self-tapping screws in it, we release the main power board. The power connector that the power cord is plugged into is a problem. It is fixed on the latches and released with difficulty using a mat (verbal). But the shell of the case is separated from the upper part relatively easily and naturally. Also, the control panel is easily disassembled and the controller board is removed (not in the photo, the batteries are dead). The heater can be easily separated by unscrewing two screws.
When parsing, it is necessary to strictly remember (or write down) the screws and screws. They are individual in almost all attachment points. If mixed up, you get a puzzle when assembling.
3. An unexpectedly weak solution to ensure the stability of the control electronics power supply. This leads to program malfunctions with undervoltage in the network and short-term disconnection. MV spontaneously goes into heating mode.
4. Inexplicable common sense use of relays instead of semiconductor devices, which leads to clicks inside the MV during its operation.-SR-TMH18LTW is her husband's comment on the repair of this beast, it's about choosing a multi!

Is this your husband saying?

I am in el and oak tree technique, I am a farmer! And he was an electrician with a diploma who spoke toi pisamshi ... I vaasche with a computer and yenet only a year. I don’t rummage in it much, your forum is the first .., I’m learning to correspond, I don’t really know, but what else is a repeat? Except here I am nowhere to be found ...

I am in el and oak tree technique, I am a farmer! And he was an electrician with a diploma who spoke toi pisamshi ... I vaasche with a computer and yenet only a year. I don’t rummage in it much, your forum is the first .., I’m learning to correspond, I don’t really know, but what else is a repeat? Except here I am nowhere to be found ...

Repeat, and word for word from another site. There Alexander disassembled and told this cartoon. Here is an interesting family. You are in Donetsk ... and your "husband" is in Tomsk, and how special is it for cartoons ...

BrandNewUser »Sat Apr 24, 2010 9:02 am
Upon urgent requests, I am placing photographs of MV in the process of its partial disassembly.
It should be noted such aspects as:
1. Simplicity and fairly high reliability of the MV design.
2. Relative ease of assembly / disassembly and maintainability. For disassembly, it is enough to unscrew two self-tapping screws - one under the condensation container, and the second near the plastic bottom on the side surface. Next, gently pick up the metal shell of the case with a thin screwdriver and release the plastic bottom. Having unscrewed two self-tapping screws in it, we release the main power board. The power connector that the power cord is plugged into is a problem. It is fixed on the latches and released with difficulty using a mat (verbal). But the shell of the case is separated from the upper part relatively easily and naturally. Also, the control panel is easily disassembled and the controller board is removed (not in the photo, the batteries are dead). The heater can be easily separated by unscrewing two screws.
When parsing, it is necessary to strictly remember (or write down) the screws and screws. They are individual in almost all attachment points. If mixed up, you get a puzzle when assembling.
3. An unexpectedly weak solution to ensure the stability of the control electronics power supply. This leads to program malfunctions with undervoltage in the network and short-term shutdown.MV spontaneously goes into heating mode.
4. Inexplicable common sense use of relays instead of semiconductor devices, which leads to clicks inside the MV during its operation.

Orion and cartoons similar in lid closure (they themselves carried out repairs today) after several days of use, the lid stops closing normally. The mechanism is under warranty, no way to climb. The husband stuck a 2-sided adhesive tape on the key from the inside, where the spring is, you can't see it in the photo, so I can't show it yet. But now it works well. I am disabled for cerebral palsy 2nd group, my husband is a slave. not formalized, but in his free time he helps rem. email devices. I don't know where he got the text, comp. general, clearly not out of malice. he knows my dislike for the electrician, so he slipped him, now he went into the night, and I and my daughter Irinka. If there is any mistake I ask everyone for forgiveness, I didn't want to humiliate anyone, or I just wanted to help myself to gain points. The best enemy of the good is visible ...

Dasha, you just quoted a text from another forum, but the quote was perceived as a direct text of your husband. Nothing wrong.

It's a pity that it happened with the cartoon. She's under warranty - can you contact the service? Still, if there is no mechanical damage (traces of impact), then this must be a warranty case.

I don't know where he got the text, comp. general, clearly not out of malice ...
I didn’t want to humiliate anyone or just wanted to help myself. The best enemy of the good is visible ...

Let's count - let's go! World! Friendship! Gum!

it is a pity that there is no separate temka for POLARIS PMC 0512 A

this is certainly not a separate branch, but there is something ....https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=128406.20

I hasten to share my joy - today I also bought, finally (after much pain and thought), Polaris PMC 0512AD !!! It was love at first sight! As soon as I saw this most sympathetic face, I realized that I could not leave the store without buying it. I JUST DISTRIBUTED WITH HAPPINESS !!! I'll calm down a little, my emotions will subside and I'll go to get acquainted with my beauty ...

And we don't have that, sorry ... Who knows where you can find the interchangeability of pots here? Well, there, for example, DEKs approaches Orion ... Who knows A UUU!

But we don't have that, sorry ... Who knows where you can find the interchangeability of pots here? Well, there, for example, DEKs approaches Orion ... Who knows A UUU!

Measure the height and width of the saucepan at the top and bottom with a centimeter. And also take a picture so that you can see which bottom is flat or round.
Then they will tell you more.

14cm deep, 24cm diameter, flat bottom, this is my Orion.

14cm deep, 24cm diameter, flat bottom, this is my Orion.

For the dimensions of the DEX saucepan, see here:
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=89830.new#new

How's the Polarnik test? Pts. Interestingly, I, too, do not know which one to take !!

I wish you all good health! Well, I would like to tell you how communication with my beautiful cartoon Polaris 0512 developed. Here's what I already cooked in it: 1) stewed potatoes with steam cutlets, 2) mannik, 3) pilaf, 4) cabbage soup. Everything is just super !!! But still, I think it takes time to learn how to determine the duration of cooking and proportions. The most important thing is that I freed up a lot of time - today I laid everything on the cabbage soup and went quietly for a walk with the child; when they returned, everything was already ready. Everything turns out very tasty. I am delighted! 8-)

[Lailimo]

Lailimo and you still did not make a curd cake in it? try it. https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=422.0.html
in a multicooker he turns out to be simply incomparable.

: girl_red: Oh, and in my Orion there is this cake, ... in short, I didn't get it. All the opal is in a pancake and in the middle is raw ... And the zebra yes !!! : nyam: Now I want the 2nd cartoon: girl_cray: but I don’t know which one !!

carried away by testing polaris brought from the store, smelled not very good (plastic). poured water and put the STEAMER on the meat (20 minutes). the smell disappeared inside, remained outside. now it doesn't smell outside either. then set the correct time (it has a clock). cooked: stewed cabbage with meat, borscht, yogurt, boiled pork, young potatoes with vegetables. I think I'll get fat
I'm moving to the topic about Polaris

There is a new multicooker, this time from Scarlett. _
It looks exactly the same as the round Yummi, but there is no baking mode, but there is a separate mode for milk porridge (at least as stated by the manufacturer). There are no prices yet, but in theory it should be cheaper than Yummy.

There is a new multicooker, this time from Scarlett. _
Looks exactly the same as round Yummi

It looks even more like the Viscount, there is 4.5, in Yummi - 5, and there is no pastry either, as in the Viscount, but you can bake on rice.

I already wanted to give up the wait and buy 45 Marusya, and then 47 appeared (though for 5000 rubles).

I already wanted to give up the wait and buy 45 Marusya, and then 47 appeared (though for 5000 rubles).

Congratulations on your renewed choices. Have you looked at prices in online stores or in retail?

I already wanted to give up the wait and buy 45 Marusya, and then 47 appeared (though for 5000 rubles).

Or maybe now it makes sense to wait until these are on sale? ... Multicooker REDMOND RCM-4511
🔗./products/Multivarka_REDMOND_RCM4511

It will even be possible to talk to her ...

[Check mark]

Check mark, I wanted to read, but by your link "page not found". She was walking! Exactly - "voice guide"!

Or maybe now it makes sense to wait until these are on sale? ... Multicooker REDMOND RCM-4511
🔗

It will even be possible to talk to her ...

No REDMONDS marked as not an option (for confusion in the programs of previous versions) - got a bad in my pick list.

Is there any statistics (for Marus in particular) on the frequency of breakdowns after a year of operation (in fact, the end of the warranty).

Is it worth taking advantage of the store's offer to buy 1,2,3 years of additional warranty, at the end of the main one?

Is it worth taking advantage of the store's offer to buy 1,2,3 years of additional warranty, at the end of the main one?

This is definitely not worth doing. Unless of course you want to become a sponsor of an electronics hypermarket

I already wanted to give up the wait and buy 45 Marusya, and then 47 appeared (though for 5000 rubles).

I'd rather pay 3000 rubles and buy Cuckoo CR-0821FI

Here the question is 300-500-1000 rubles. for 1-2-3 years, respectively.
So if only for a year, then it may be worth it (for the money) or not worth it if it does not break at all.
\ And it is certainly not profitable to change to Kuku, of which the choice is not rich, but from the available ones, too, is nonsense \

Here the question is 300-500-1000 rubles. for 1-2-3 years, respectively.
So if only for a year, then it may be worth it (for the money) or not worth it if it does not break at all.
\ And it is certainly not profitable to change to Kuku, of which the choice is not rich, but from the available ones, too, is nonsense \

Once again, paying for an additional guarantee is a waste of money. I speak to you as a service technician with experience. If you want to get rid of this amount, you are ready to provide your details
Whether or not it is profitable to buy a Cook especially 1054 is relative. The price of an average refrigerator or TV A by function, suggest better ...

Here the question is 300-500-1000 rubles. for 1-2-3 years, respectively.
So if only for a year, then it may be worth it (for the money) or not worth it if it does not break at all.

but what, there is no guarantee by default? For the same year ...
And some strange ruler in terms of a year -
300 in one year,
250 in two years
333 in three years?

Of course there is no standard 1 year warranty. This is ADDITIONAL to the current year, i.e. + the number of years purchased by the main year after its expiration.
Yes, the amount for each year is obtained, apparently breakdowns by the 4th year occur more often - therefore, to cover the risks and the price per year is more (well, this is my logical reasoning)

\ Wow, I'm not alone at a low start waiting for Marusya 47, only 2 appeared in the store and no longer - dare. And I thought that the people were still unfamiliar in their general mass with such a type of goods as the Multicooker and only rare individuals who wandered into this forum know about the innermost \

The statistics of breakdowns of any equipment is such that the maximum number of breakdowns with two peaks occurs starting from the first week of operation - a year. Then, by the end of operation, equal to natural wear and tear, it is approximately 7-10 years (unless otherwise specified by the manufacturer)

Wow, I'm not alone at a low start waiting for Marusya 47, only 2 appeared in the store and no longer - dare. And I thought that the people were still unfamiliar in their general mass with such a type of goods as the Multicooker and only rare individuals who wandered into this forum know about the innermost

When I took my Marusya from the online store, there was still a box with the same multicooker. And when I came to change the saucepan, I saw 3 more slow cookers waiting for their owners. So multicooker is very popular now.

Maybe they are popular, but I judge by the fact that no one around me knows about them: relatives, friends, work colleagues - and this is not a few people, as well as by the meager assortment (1-2 and a miracle if there are 3 different models) modestly in the corner of standing multicooker in stores (not the Internet, Auchan, Technosila, mvideo, Eldorado, ...) and to customers in these very stores who do not know about this product (communicated, advised those when courting stores for a personal inspection of multicooker )

we also have multicooker not yet in vogue. in one store, when asked about multicooker, they answered that they have a double boiler there. and in Eldorado (I think because of my advertising among friends) all Polaris were disassembled a week after my purchase

And so the order is made

I can't believe my eyes ... did it really happen

And then you can't stand it again ... and again ...

Lost in the fact that he did not wait for 47 Marusya

It was also pushed by the fact that at first all 45s cost 2,250 rubles. - in all internet shops without exception !!!
And then suddenly today, as up to 2990, prices rose in half of them, also a kind of impulse to take was for me.

And I recently saw DEX DMC 50 live for the first time. How beautiful this multicooker is ...

and I!
What a strange echo (c) The Marriage of Figaro

[ALARMus]

ALARMus, well, you did the right thing that you ordered 45. Only when you receive the multicooker check the saucepan very carefully, slide your finger over its entire surface. For the first time I came across not very high quality - outwardly everything was fine, but when I began to wash it at home, I felt some small irregularities, like bubbles. Maybe this is nonsense, but it's better without them.

[ALARMus]

ALARMus, then I felt some small irregularities, like bubbles. Maybe this is nonsense, but it's better without them.

And what did you change your saucepan for a new one?
- For the rest, how is it normal - acceptable surface variations or not

Changed to a new one, without any objection. When I was changing, a woman came up for me for the same multicooker - everything was fine with her saucepan.
And the "allowable surface variation" can be anywhere, whether it's a multicooker, just a saucepan, or a non-stick frying pan.

Hello everyone! For those who doubt the purchase, expressed their opinion about the multicooker)

Changed to a new one, without any objection. When I was changing, a woman came up for me for the same multicooker - everything was fine with her saucepan.

You had where to go to change. I take it in an Internet store - only the courier from the gate can tell the turn.

And the "allowable surface variation" can be anywhere, whether it's a multicooker, just a saucepan, or a non-stick frying pan.

If there may be ACCEPTABLE - so what did you change?
In general, so that the surface is like a smooth surface of water, frozen without ripples and other irregularities, and to look under the pan - so that nothing scratches it.

I also bought in the online store only with self-pickup - the pickup point is located not far from the house.
The saucepan didn’t suit me, and they apparently didn’t want to lose the client. And I think they then sold another multicooker with my pot to some less capricious buyer.

Hello everyone! I am urgently selling a multicooker Cuckoo 1010 F. I bought it with my husband in Stockmann. New in a box. I use 1054 myself. I'm very happy. I wouldn't sell it for nothing, but my son doesn't have enough for a moped.: cray: Price 10,000 rubles. Who is interested, write.

I ordered on time - the price has changed dramatically in all stores from 2250 to 2999.
It's strange what caused such a sharp imitation by 33%

I ordered on time - the price has changed dramatically in all stores from 2250 to 2999.
It's strange what caused such a sharp imitation by 33%

Exceptionally high demand ...

Exceptionally high demand ...

It is unlikely that there was no demand for more than 3 weeks (the price was the same) and then suddenly at first half of the stores increased the price and immediately the next day the other half of the stores increased the price and everything was like a selection by the same amount.
Well, in general, they brought it - here it is

Well, in general, they brought it - here it is

Congratulations on the end of the agony of choice! Now an interesting dating period will begin ...

In some stores, the price went up to 3190r ... this is what I saw ...

[ALARMus]

It is unlikely that there was no demand for more than 3 weeks

they were definitely waiting for you to decide. Now everything ALARMus chose, then Bend-a-a-a-th price !!!

Congratulations, good choice, most importantly deliberate!what we women sometimes lack so much