Geyser coffee maker Bialetti Mukka express

[Alexandra]

Alexandra, 6 minutes before the beginning of the inflow of the drink into the upper tank and literally seconds before filling. I cooked on a gas stove (on an electric one is definitely faster, since there is a Whirlpool electric stove in the apartment), the flame is the most militarized. The drink escapes with a crisp and snort of real jets. I took a photo, but I can't see the jet from the steam. A little moisture always remains in the lower tank, otherwise the coffee pot will be unsoldered. I run to drink coffee (the smell is annoying).

[Panevg1943]

Panevg1943 , pleasant coffee and thank you very much.

It is clear that something is wrong with mine. From boiling to filling for more than 5 minutes, the trickle is thinner than the thread, although it snorts, it does not pour. Improper operation is excluded, everything is the same as in Mukka ...

[Alexandra]

It is clear that something is wrong with mine. From boiling to filling for more than 5 minutes, the trickle is thinner than the thread, although it snorts, it does not pour. Incorrect operation is excluded.

Alexandra, oh, and my husband came running to the smell; although he is not allowed coffee, he will at least smell it. I already answered about the non-working Soviet geyser coffee maker at Lubasha, that the whole thing, in my opinion, is in the valve (there is nothing else to fail there). Can I twist it back and forth?

Everyone is happy in his cow for 2 servings, except for one:
DO NOT make one serving cappuccino in it. Milk is not whipped.

[Sergey Kornilov]

Everyone is happy in his cow for 2 servings, except for one:
DO NOT make one serving cappuccino in it. Milk is not whipped.

Sergey Kornilov , what's that portion, as they say in Odessa ?!

but I almost decided to join you - to buy a cow - but at the last moment I was afraid that it was not electric ... and then the consultant said on the phone that they had electric ones, but almost 50% of the batch was returned by the buyers ... and recently I look, electric cows began to appear again ...
help me decide already on something! .. I just rarely drink black coffee, but here there will be a wonderful cow for pleasure ...

[Jinar]

But I almost decided to join you - to buy a cow - but at the last moment I was afraid that it was not electric ...

Jinar, and what do you see the advantages of an electric coffee maker? If you have gas at home or there is a stationary electric stove, then what is the need to have an electric device (such as an electric samovar) ?! ... As for the Italian parents of this thing, they prefer non-electric geyser coffee makers. I believe that the lower the flame you cook (a little longer in time), the richer the coffee from the geyser coffee maker, since the generated steam gradually squeezes everything out of the ground coffee without a trace, forming the same dense tablet as when making coffee in a coffee machine ... Join us - you won't regret it.

well, on an electric one like in a kettle - I pressed the button and went to wash - in 20 minutes you can come back and drink some hot stuff ...

although, I have nothing against a couple of minutes of meditation on the stove (I have it gas) - a wonderful smell for a wonderful morning ...
I just don't use an ordinary Turkish tea, I prefer tea - although I brew it just before each use)

[Jinar]

well, on an electric one, like in a kettle - I pressed the button and went to wash - in 20 minutes you can come back and drink some hot stuff ...
although, I have nothing against a couple of minutes of meditation on the stove (I have it gas) - a wonderful smell for a wonderful morning ...

Jinar, in 20 minutes!!! you can boil a bucket, and coffee will become even that pile. There is no need to meditate on the stove. You will just have 6-7 minutes of time to wash up

then, then, I need another timer))))
to be honest, I never thought about how much time I need to wash my face

in general, soon I really hope to join the ranks of cow breeders!
and the electric just 20-minute heating mode has

[20 minute heating mode]

but electric just 20 minute heating mode It has

So I say: "Burda!"

On the contrary, I was glad that it was "dull-iron". There is simply nothing to break. On foreign sites, you sometimes come across reviews that people have been using these coffee makers for 10 years, and they all work.
And the electric one will not run away, but create a short circuit, but not wash it properly.

And this one can be washed with a brush under the tap and that's it.
...
The only thing I regret is that when I ordered from E-Bay I did not put another O-ring in the kit.

[Panevg1943]

Panevg1943 , so you have a cow and a big one with a small Arte & Fuoc? Does everyone taste the same? I’m confused. At first you had Arte & Fuoc and you are satisfied with the taste, and your friends ran for the same. Why then the ladybug? Because she makes cappuccino, but those models don't? I was sure that I needed a coffee machine, but now: - \ Have all the coffee machines been removed?

[kolynusha]

Have all the coffee machines been removed?

kolynusha
I "packed" my Bork last night, immediately a lot of space was freed up! Although Bork made both espresso and cappuccino ...

And I just have no time, I come very late. But my husband and I have already decided - we remove our Saeco Nina Bar

[Crochet]

I'm thinking of taking one serving or two. Crochet, how long does the whole process take? Alexandra, and you? In the morning I need 2 cups, and if I want to drink in the afternoon, what should I drink 2 cups? How do you solve this?

[Crochet]

Crochet, how long does the whole process take?

kolynusha

I didn't notice it on purpose, but in my opinion, the whole process, starting from the moment the "ladybug" is placed on the stove until it is fully prepared, takes 3-4 minutes, perhaps even less ... today I will cook, I will mark the exact time.

[kolynusha]

To me, to be honest,kolynusha one small espresso is not enough.
We drink together. If there were Cows for 4 servings, I would buy one for two.

And cappuccino is quite 2 servings for two. And we don't drink it so often - the main thing is that there is such an option.

It takes a maximum of 3 minutes (I won't lie, I didn't notice), I have gas, on a small light. It's before boiling. And after - a few seconds

I think that 1 serving of espresso in a large Ladybug can be brewed. The requirement to pour water up to the valve is primarily "not above the valve". Below - you can.

But Sergey cooked cappuccino - read his message below

On the site 🔗 and in the Italian instruction
it is recommended to select the heating power in such a way that the whole process takes 5 ... 6 minutes
I have 5 minutes and 15 seconds on a small electric stove at maximum power. Especially with a stopwatch stood.
(If the comfort is cold at the moment of switching on)

By the way, we prepare espresso for one suck without problems, and cappuccino, if you pour the full amount of water into the milk, a little more than half, then it turns out 300 ... 330 ml of the drink, which I can safely use in one. The foam is simply not so high.

[Panevg1943]

Panevg1943 , so you have a cow and a big one with a small Arte & Fuoc? Does everyone taste the same? I’m confused. At first you had Arte & Fuoc and you are satisfied with the taste, and your friends ran for the same. Why then the ladybug? Because she makes cappuccino, but those models don't? I was sure that I needed a coffee machine, but now: - \ Have all the coffee machines been removed?

Kolynusha, you understood correctly that I have two geyser coffee makers for 2 and 6 servings, and I gave the "ladybug" to my daughter on March 8, since she does not drink espresso, but loves cappuccino. The daughter is delighted. She has an American Universe coffee machine (old), but recently she rarely used it (it seems, because of the hardness of the water), and now she has completely removed it, she says.

Has anyone seen this model live?
They only have this one in stock. From the photo, it feels like it is made of aluminum, it will be scratched from any intrusion.

[🔗]

Has anyone seen this model live?
They only have this one in stock. From the photo, it feels like it is made of aluminum, it will be scratched from any intrusion.

Kolynusha, I recommend to go here: 🔗 Everything is detailed here. As for the material, these coffee makers are either chrome-plated, matte, or painted aluminum. In my opinion, Mukka is only aluminum of different colors with or without a pattern (ladybug). It is necessary to thoroughly rinse and dry after making coffee, since greenish specks may form inside over time (I read it on some forum).

Tell me, if the stove is electro-ceramic, then it will no longer be possible to use the Ladybug?

[Leska]

Leska, there are electric cows.

Is your stove just ceramic? or induction?
If it is just ceramics, then it is definitely possible, but if it is induction, then it should be checked. It seems that you cannot cook on it in aluminum dishes, and the bottom of the cow looks like steel.

It is also impossible on "just ceramics" in aluminum dishes - "traces" remain on the surface, and it is very problematic to wash them. But if the bottom is really steel, then there is no problem.

[k.alena, Sergey Kornilov, kolynusha]

k.alena, Sergey Kornilov, kolynusha , Thank you. Now I'm changing the electric pancake stove to a more practical and interesting one. I would like to initially induction, and if not fate, then just ceramics. I saw an electric coffee maker on the site, but I was not inspired and did not see any reviews about it. Is it not difficult for you, the happy owners, to check if the bottom of the coffee maker is magnetised?

[about]

Is your stove just ceramic? or induction?
If it is just ceramics, then it is definitely possible, but if it is induction, then it should be checked. It seems that you cannot cook on it in aluminum dishes, and the bottom of the cow looks like steel.

I have steel chrome coffee makers. I also made coffee on an induction ceramic hob (the one I have in my apartment). There are no stains, but cooking is not entirely convenient, since the diameter is even baboutThe largest coffee maker is smaller than the smallest circle on the panel, although there are no particular problems (the handle is not lit). On the gas hob made of tempered glass (I have one in my house), you can remove the flame to a minimum. I did not compare the boiling process in time, since there is a small coffee maker in the house, but a larger one in the apartment.

I am reporting.
I have a spotted Mukka.
The magnets do not stick to the bottom. So bummer, it won't work on an induction cooker.
Although the advertisement says that some models have a steel bottom. So you can try to search.

I am reporting.
I have a spotted Mukka.
The magnets do not stick to the bottom.

I have a transparent "ladybug", magnets do not stick to the bottom either.

The magnets do not stick to the bottom. So bummer, it won't work on an induction cooker. Although the advertisement says that some models have a steel bottom.

The magnet does not stick to my chrome-plated ones either, but (see above) I cook on induction without complications.

[Crochet]

Thank you all for your help: flowers:. I went to Sokolniki.
She returned with purchases: a transparent single-portion coffee maker, coffee beans and coffee syrups (France) Chocolate, Hazelnut and Cinnamon. Dovooooolnaya me. If it doesn’t fit the new stove, then I have a traveling kyrogaz in my store

The "ladybug" is lovely ... but I have it as a toy (for 1 portion), I didn't even think that it would be so small

Crochet, you have not seen what are in the store - the size of a palm, like a toy from the Children's World. ... there are even musical

[Recommendations for the use of a geyser coffee maker]

I read the forum "about coffee", this is what I brought:

Recommendations for the use of a geyser coffee maker

1. Use good water. Preferably filtered or from a "bottle".
2. Only fresh coffee, freshly ground, pure Arabica or espresso blend.
3. The grinding is not too fine, but not too coarse, something between an espresso and a French press. Coffee granules must not seep through the filter holes. If you have sediment in the cup, increase the grind.
4. Adjust the amount of coffee to your liking.
5.Smooth the ground coffee in the filter, tamp very lightly.
6. Clean the edges of the filter from coffee residues.
7. You can add hot water from the kettle before cooking.
8. Cook over medium heat, if it is a gas stove, make sure that the fire does not go over the edges of the coffee maker.
9. Before first use, brew a few cups of coffee and drain into the sink. Due to the fact that after each preparation a protective layer of coffee oils forms on the walls, which protects the drink from the influence of aluminum on the taste.
10. Screw the two parts together very tightly to avoid pressure loss.
11. After making the last cup of coffee, disassemble all parts of the coffee maker and wash thoroughly.
12. Do not use cleaning agents, only WATER!
13. Watch the steam valve, it may clog over time. Rinse regularly with warm water.

the most important thing in the process:
1) coffee in the filter must not be clotted !! (it was written, I just stress it.)
2) Do not keep on fire for too long. As soon as the coffee stopped pouring out - immediately remove it from the heat !!!

Coffee is better in aluminum than in steel.

[Leska]

Leska
Congratulations on a wonderful purchase! Did you buy it specifically for cappuccino? For example, for espresso, I don’t like cappuccino ... by the way, I’ve already got used to it, and the espresso is obtained with a very beautiful froth of “cream”!

[Alexandra]

I have been unable to receive an invoice for several days already Ordered here 🔗... by recall Alexandra... I call them every day, they say that they will give them to the manager who works with orders via the Internet and silence. Can you tell me proven Internet stores, I want a ladybug

[kolynusha]

kolynusha
Wow ! My husband ordered me on March 8 as a gift in the same online store in the hope of getting a "ladybug" closer to the holiday, but already 2 hours after placing the order, he was called back with a message that the courier had already left, the husband did not expect such agility I was even upset not knowing where to hide my gift ...

So I think, even if I knock out this account, transfer the money, they will send it to me for a year. They will take you to you faster, since you pay the money after delivery. In addition to a cow of different coffee, I scored a heap, already rolled out my lips

Better to pay in cash after the fact ...

Better to pay in cash after the fact ...

I am of the same opinion ...

Girls, I'm not from Moscow. I bought a lot of things through the Internet, each time with experiences. And I still have a lot of equipment to buy, and all through the Internet. Therefore, I ask the question about trusted stores.

[Panevg1943]

Panevg1943 and everything, everything, everything from me. How happy I am with the toy

kolynusha , I chose here: 🔗 (director - Dima - (495) 505-3530- can agree with him on delivery by cash on delivery), but since there was an opportunity to hold each in my hands, I drove up myself. And their price turned out to be much lower (3300 =) than what you indicated. I also called them several times, so they answered by rote that "in principle there are cows - but no".

Therefore, I ask the question about trusted stores.

- it's difficult ... today everything is fine, but tomorrow is a big question

For 3400. Have you ordered a new or used one?

[kolynusha]

For 3400. Have you ordered a new or used one?

kolynusha
What kind of "ladybug" did you order for one or two servings?

Such 🔗

Of course new, in the original packaging.
Made in Italy. Definitely not a Chinese potty.
I often buy things there.

🔗

[Sergey Kornilov]

Sergey Kornilov , for me this is a dark forest, and even in English, everything is interesting. And you, well done

Use the Russian version if your language is strained:
🔗

If you need advice - ask.

I looked, from this site it will cost me 3200.

You need to search for a product on an international website: 🔗... There the choice of goraaazdo is greater than in Russian.
I threw you the link above. (39.99 + 22 euros shipping) = ~ 2500 rubles.
And in Russian, just register and you can read the help, how it works.

Well, I say, dark forest Well, I really don't know, I ran through the first link, I didn't find my model, I don't want a spotted one.