Geyser coffee maker Bialetti Mukka express

And my milk stopped whipping. I can't understand what is the reason. The same milk is whipped on a coffee machine, but does not want to be in mucca.
Maybe I have a problem with the valve?

My milk was not frothed and coffee did not come ... I had to buy a new valve, and now everything is OK. The store said that the valve was clogged and that it needed to be cleaned with a special liquid for this purpose. The liquid is not cheap .... decided that the new valve is better)))))

My coffee is fine, but the milk has stopped whipping.

My coffee is fine, but the milk has stopped whipping.

Masha, if everything is fine with the valve, then try this milk
🔗
I just use it. The cap rises to the lid.
At first, all the coffee was poured out through the gasket.
Then, I began to spin tighter and found the optimal temperature.
I have glass ceramics. Immediately I put it on 6 and after ten minutes the valve works.
And if with a double amount of water and with a raised valve, then you already need to set 7.
This is for a 2 cup coffee maker.

[Suzy]

Suzy, Thank you!! I didn't even think that Agusha would whip well)

[Suzy]

Suzy, Thank you!! I didn't even think that Agusha would whip well)

Well, try it with this milk. If it does not work out, then the reason is still different.

Good. I already found a new valve where I bought the coffee maker itself. Costs 400 rubles)

Good. I already found a new valve where I bought the coffee maker itself. Costs 400 rubles)

If you have cotton, the valve is working properly. Have you tried to blow it, is the air coming?

Yes, there is cotton. The air is blown out and passes through normally.

Yes, there is cotton. The air is blown out and passes through normally.

Maybe then you don't need a new valve, try new milk first. Here a lot depends on the temperature. You yourself know.
In general, not a coffee machine, but a riddle. Every time, let him give out something

Thank you))
The only thing is that the valve is all flimsy. Those hang out. If you turn it upside down, then the cap quietly falls down.
And you also?

Thank you))
The only thing is that the valve is all flimsy. Those hang out. If you turn it upside down, then the cap falls quietly in them.
And you also?

I certainly did not turn it upside down / head, in the lowered position the upper part really dangles. But, if the cap is lifted up, it is fixed. Wait at work, otherwise I would have looked at what and how.

Well, mine too)
This is me to exclude everything)

Well, mine too)
This is me to exclude everything)

Also, I began to heat milk, you - it seems too ... So the coffee turns out hot.
I wonder how your experiment with Agusha will end. Write.

I always heat the milk to very hot, and the milk is always the same brand, and the foam, alas, is not predictable .. sometimes just a little, then over the top rushing foolishly. I warm up in a cup from a coffee maker, so the amount is always the same. the foam is dark and cannot be examined

It looks like my valve is dead. Doesn't skip coffee, damn it !!
I dropped it on the floor out of anger. And how can you not skip coffee when water and little water passes under the stream.
In general, the quality disappointed me. I didn't really use it.

Hooray !! Earned !! Was he scared or the shock from falling on the tile happened !!
Probably clogged up somewhere!
I just put it with water. She poured water down and water up.
And all the water turned out to be dirty, coffee-colored. Cleared the valve)
Maybe my way will come in handy)

It looks like my valve is dead. Doesn't skip coffee, damn it !!
I dropped it on the floor out of anger. And how can you not skip coffee when water and little water passes under the stream.
In general, the quality disappointed me. I didn't really use it.

I have been using mine for 3 months. I ordered at Received through the CDEK pick-up point. So, if anything, back by mail ...
I brought home a coffee maker, and on the lid, one ear (I don’t know what it’s called), which is attached to the body, is higher than the other. A week later, a deep crack appeared there. I thought one side would fall off. How many I wrote to them, called them - to no avail, did not even react. And as a result, while everything holds. The quality of the Turkish is not very good, if there is an opportunity, it is better to look at everything upon receipt. And the coffee is good.

Hooray !! Earned !! Was he scared or the shock from falling on the tile happened !!
Probably clogged up somewhere!
I just put it with water. She poured water down and water up.
And all the water turned out to be dirty, coffee-colored. Cleared the valve)
Maybe my way will come in handy)

Masha, I'm glad for you. If anything, we will do so.

Masha, drukh, thank you! I will also clean mine, for prevention and will not help, I will go to the bathroom and drop it on the floor, I have tiles there

[Ksyusha]

Ksyusha, killed !! Just don't throw it well on the tiles !!

Well, Mash, this is how the valve will decide, I warned him

I am reporting! I almost stopped drinking coffee, because I started having terrible headaches.
I drink once a week, maybe it's a great pleasure for me.
And the head no longer hurts, the body is weaned from coffee and does not require)

Today I decided to try the valve after cleaning.
Iiiii, everything works !!! Makes froth, makes coffee !! Hooray !!!!

I decided to share my observations and experience in using this miracle of technology, I even registered.

So, let's begin.
They gave me this coffee maker 3 years ago, well, I really love coffee (both black and cappuccino) (everything else, from the cezve to the car, just gathers dust in the kitchen)

We started grinding to each other with her
1. Does not whip milk
2. It passes from the side, at the junction of the lower flask and the upper bowl.
3. Once I forgot about her, stood talking on the balcony on the phone. As a result, the refractory paint on the underside is burnt.

Research results.
1. Milk is not suitable for all, it is best to use milk with a high protein content (Prostokvashino selected for me, 99% of a stable result. The foam is thick and does not settle)
2. I pour coffee very carefully, if it gets on the seal it starts to leak. I used different coffee, from my own experiments with grinding, to specials. orders. Oddly enough, settled on Brazilian Arabica, from Live Coffee (this is for cappuccino). Black coffee, a separate topic)))

Recently I changed the filter mesh, it comes with a seal, it is easy to change, pry it with a knife and everything is immediately clear.

Well, on the road)))
The other day the valve blew off, half of the kitchen was in coffee, it was good that no one was in the kitchen (usually I hear the sound of a helicopter taking off, and I go to the kitchen to take off the coffee maker, the enamel on the stove was chipped off, the valve itself is heavy) The plastic of the valve just burst. Now I ordered myself a new valve.

Outcome:
The unit is problematic. BUT, the taste of cappuccino interrupts the problems of its use (I really like the taste of coffee in the froth, everyone who drops by to visit asks to brew cappuccino)

P.S. I'm not going to change)))

Robin Bob, what happened to your mesh, why did you change it? I wash mine with a brush once a week, it's as good as new.

I changed it because of the sealing gum, I often use a coffee maker, and it began to "tan" from time and temperature, even if there is no coffee on it, it stopped holding pressure and constantly leaking. A set of mesh + elastic band, something about 150 rubles

I changed it because of the sealing gum, I often use a coffee maker, and it began to "tan" from time and temperature, even if there is no coffee on it, it stopped holding pressure and constantly leaking. A set of mesh + elastic band, something about 150 rubles

Everything is clear with an elastic band, it deteriorates over time.

Good people help me, a burenka came to me, and the valve with a crack, the manager claims that this is the way it should be, he says that he has reviewed all the coffee makers, and there is a crack everywhere, convinces me that this is a feature, not a marriage. If it doesn't make it difficult, look at your own, do you have it or not? And the second question, the coffee maker worked for two weeks and suddenly began to boil for a long time, and in the latte mode, coffee slowly flows out and cold (as if there is not enough pressure), and before the pressure was slightly less than that of a cappuccino, even the foam was small, what is the reason? Please help, for the sake of your help I registered here) Photo of the crack is attached.

I already have a second valve and both are without cracks and defects, look there is a photo in the valve net

I looked at my valve. The coffee maker is made in Turkey. I don’t have such a big crack, but if you take a closer look, the valve is not one-piece and in this place is the junction of the parts. In mine, if you go down a little lower and on the inside, there is also a poorly sealed seam - a small gap. This is how it should be. After the purchase, it was also strange for me to see this, and then I realized that this was a feature of assembly and gluing, welding, I don’t know how to say, of the valve.

It became interesting, crawled behind her cow. There is such a letter! You cannot call it a crack, yes, indeed, this is the place of assembly-gluing.

I also have a microcrack, if they had not written, then I would not have known about it.

I won't look at the first valve, I threw it out, and the two spare ones (those that I bought separately) don't have any cracks.

Good people help me, a cow has come to me, and the valve is cracked,

I also have a crack (in the same place as yours), it was originally, but there are no problems when brewing coffee.

Hello everybody! Give the correct amount of cappuccino coffee from the coffee machine for 1 cup. It is desirable to measure directly. I will be very grateful! In online stores they write 220ml, here I read about 330ml (but in electric, but I need it in a regular one).
And if you take 2 cups, it certainly does not whip milk when filling as 1? Has anyone else tried it?

Found at the office. Italian website: 1 portion 320ml, 2 portions 220ml.
If you know where you can buy for one portion, please write.

Where are you from? if in Belarus, then mokashop. buy

no, from Russia. Tell me all the same about the volume of a single portion, I found a store in which it is, but there is also 220 ml indicated. Maybe those that go to Russia at 220, and if you take over the hill, then 320 ...

I painted on the box, 2 cups, as I understand it, it is just designed for two servings. In the case of cappuccino, it turns out like this, 2 incomplete standard cups, about a centimeter is missing from above, this is together with foam, or an almost full broth. But this is with good milk, when coffee and foam, exactly on the entire upper container, and it does not settle. For more than a month I have been selecting milk, different brands, different fat contents, different amounts of carbohydrates.

I painted on the box, 2 cups, as I understand it, it is just designed for two servings. In the case of cappuccino, it turns out like this, 2 incomplete standard cups, about a centimeter is missing from above, this is together with foam, or an almost full broth.

I confirm that everything is so! Now I specially brewed and measured it with a measuring glass - 320 ml of the drink itself plus foam, I measure water and milk with a measuring cup from a coffee maker.

I just dropped the valve and it died (where do you buy spare ones? I can't find a single site in Russia where parts for mukka are available

I won't look at the first valve, I threw it out, and the two spare ones (those that I bought separately) don't have any cracks.

have you recently bought valves?

🔗 I took from them. There was a little epic, there are two types of valves, just say what you need with a red (brown) ring. There is a second type, but this is for coffee makers over 5-6 years old.

🔗valves and rings

Good day!
Tell me, I decided to buy a "ladybug" and immediately accessories to it.
With the valve, I understood, but the rubber seal will fit the one that for 2 servings or for the "ladybug" you need some special ones?
Confused that the packaging in the listed models does not indicate "cow"
Do I need to buy a filter funnel right away? Or does it fail quickly?
Thank you in advance for your response!

[Natali4595]

Natali4595, do not rush the parts will not go anywhere, but the gum of the seal will dry out during long storage. Use your "cow" with pleasure and do not think bad. I haven't changed anything yet.
And, welcome to the forum

m0use Thank you !!!

In several years of use, the valve burst twice. Why do they make them so flimsy-plastic? (((And it's very easy to clean the valve - I use a guitar string)

Citizens, I tapped this coffee maker from overseas countries



There was such a sea of ​​them that my eyes fled, I still can't put it together. I am a lover of cappuccino and grabbed this one, because I decided that "moka crem" was it.

Now I'm wondering if it is possible to cook cappuccino in it or just espresso with foam. Maybe someone has one, share your experience please !!

Citizens, I tapped this coffee maker from overseas countries



There was such a sea of ​​them that my eyes fled, I still can't put it together. I am a lover of cappuccino and grabbed this one, because I decided that "moka crem" was it.

Now I'm wondering if it is possible to cook cappuccino in it or just espresso with foam. Maybe someone has one, share your experience please !!

Kara, "New from Bialetti! Now there is a built-in press (whisk) inside the coffee maker for a delicious froth when making espresso." It will not work for cappuccino.