Ice cream molds and spoons

[Luysia]

Luysia, they are small too, but very cute. Very nice plastic. Height 8.5 cm, width 4.5 cm. Ice cream fits about 50 gr.

[Masyusha,]

Masyusha, Thank you!

I would like twice more, that would be like in childhood ... And dip in chocolate ...

[Luysia]

Luysia, I agree, more would be better. And I also dip these in chocolate. I freeze ice cream in molds in the freezer for several hours.
Preparing the icing. There should be a lot of it so that you can freely dip the ice cream into it and it is completely immersed. To do this, I take 200g of any chocolate and 200g of butter. In a water bath I melt butter and chocolate. After that, I dip the molds in boiling water and carefully take out the ice cream. I dip it in warm icing as quickly as possible, take it out and hold it in my hand until it hardens (a few seconds). Everything, a popsicle in chocolate is ready. True, a little glaze remains, but that's another story

The bourgeoisie is getting cheaper
Wo stumbled upon Amazon 🔗

And here the size of the form is

And you want more balls in ice cream bowls and pour chocolate and fried nuts

[Scops owl]

And I want more balls in ice cream bowls and pour chocolate and fried nuts

Scops owl , so the balls, which are laid out with 2 spoons, are normal - 5-6 cm in diameter. As in a cafe You can even pour chocolate or syrup. I also love ice cream with maple syrup (my husband's brother brings us from Canada).

[Larissa]

.Larissa, and where did you buy the molds, if not a secret?

[Larissa]

.Larissa, and where did you buy the molds, if not a secret?

Oh, Natasha, they are more than a dozen years old, I bought them in Leningrad.

And the molds are ordinary, for ice cream. I have different ones, now I did in such

sorry

[Added]

Natasha, why is it a pity? Now there is a very large selection of different such molds!

We bought molds yesterday in Uuterra, they are there for 79 rubles.

Their website is slightly different:


The one we bought is more convenient in that the forms are better separated - it is more convenient to lower the required one into a glass of hot water. And here are some wide jumpers.
Added:

And, here on their website I found 8 servings and without such wide jumpers:



In the freezer, the grates were placed on a plastic cutting board.

sorry

And also in Ikea they sell molds in the Brownie.

Thank you all for the advice I will ask my daughter for help, otherwise I have not seen anything like this in our stores

[Natusik]

I have already found where to buy such ice cream molds. I will definitely do it for my daughter. Thank you very much!

Natusik, and can you link to the molds to know what to look for?

Alenka, there aren't any of them!
🔗
🔗
🔗
And many more ...

[dopleta]

Thank you, dopleta ... Now I know what to hunt for. (y) Are they not harmful (in the sense of not emitting anything)?

[dopleta]

Thank you, dopleta ... Now I know what to hunt for. (y) Are they not harmful (in the sense of not emitting anything)?

Well, what are you! They are made of food-grade plastic and, moreover, are not heat-treated.

Laris, can I get in?
Who cares about money, there are very nice tools for ice cream. But darling ...

🔗

Laris, can I get in?

Not possible, but necessary! Cool link, thanks! But I just want to advise - there is a package of sticks of 800 rubles, and I buy medical disposable spatulas for the same purpose at the pharmacy, the price per package is 50-80 rubles.

[dopleta]

dopleta what resourcefulness!

Girls tell me pliz who has such a spoon is it original or not




sold on ebee for 3.59 dollars with free.delivery from China, but here they wrote that these spoons seem to be from America
I think maybe this is a Chinese fake and you shouldn't take it?

Girls tell me pliz who has such a spoon is it original or not
<...> but here they wrote that these spoons seem to be from America
I think maybe this is a Chinese fake and you shouldn't take it?

Oksana, I didn't quite understand the question. Original of what? There are many such spoons. They are made by different firms in different countries.
TESCOMA (Czech Republic), Fackelmann (Germany), Gipfel (Germany), Winco (USA), BergHOFF (Belgium) and others

but I didn't even think that they are from different manufacturers
I saw this on the first page, it is written that the production of the USA and then many girls unsubscribed that they have the same, so I thought that they all had the same company and then suddenly I saw that they were selling from China, and I wondered why they were suddenly selling American spoons
thanks for enlightening

I bought such a spoon in the Metro, for 40 UAH, if I'm not mistaken. The price depends on the size of the spoon. I have an average. I use it both for ice cream and shape meatballs. Mine in the dishwasher and by hand. Nothing is done to her. The original is not the original, I don't know. China manufacturer for sure.

but I didn't even think that they are from different manufacturers
I saw this on the first page, it is written that the production of the USA and then many girls unsubscribed that they have the same, so I thought that they all had the same company and then suddenly I saw that they were selling from China, and I wondered why they were suddenly selling American spoons
thanks for enlightening

I got this one from Tao Ba- of a very decent quality, at a cost about the same came out as you wrote. I will not say anything about use yet, because my ice cream maker will probably be on the way for about a month, and the spoon jumped in a week

[Girls]

Girls I have ice cream molds 2 sets.

🔗

If someone needs Selling write in a personal.

Girls, tell me, pliz, I'm still without an ice cream maker, but I'm getting ready hard. I ordered the popsicle molds, but to be honest I can't quite understand. My re loves ice cream on a stick very much, I'm sitting thinking how to make it myself. So I made an ice cream in an ice cream maker, and then I need to push it into these molds (it seems from the freezer it was not very frozen initially) and into the freezer or something else?

[Playful]

Playful, I transfer soft ice cream from the freezer to the molds and into the freezer. When I need to take it out, I will hold it under warm, hot water and take it out. So far, I only have baby forms, it looks like this:

you need to push it into these molds (it seems from the freezer it is not very frozen initially) and into the freezer

Quite right, Shalunishka. You can use ready-made molds, or you can use disposable cups and a disposable spoon instead of a stick.

Girls tell me pliz who has such a spoon is it original or not

Today I saw exactly the same spoon in the store. In the same blister, with these horns. Price $ 3. I bought the same one in this store 2 weeks ago, only without packaging and the sales price was the same. At the first use, I broke it safely. It seems that I don't have the strength of a hero in my hands, the ice cream was just from the Klatronic ice cream maker, that is, not stone, but I broke it like there was nothing to do. The husband then collected it all back and it even works, but here's how you mold such minced meat - I don’t know, mine will definitely not withstand such experiments.

Ksyusha, I do not argue that this particular spoon is "dishonorable". I didn’t have exactly that kind of packaging for spoons, and not America, for sure. The packaging, if I'm not mistaken, was gray. I threw it out esessno. The spoon says steinless china. And on the cardboard the manufacturer is China, I remember exactly. I bought it in the Metro stores.
I only form cutlets with it, and often ice cream from the refrigerator is an icy hoo. It didn't break. I went and weighed her - 110g. All iron, with a spring so not sickly. What other characteristics may be, I do not know.I don't use force too

[Natasha]

Natasha, mine is also naturally maid in China. Weight jumps from 93 to 100 grams. Weighed it went. I'll try to rivet the buns with it. Maybe I have it not for ice cream, but for cutlets.

thanks girls, I'll see what other spoons they have for sale
I also found such molds with a straw


I think those cat with a round cup will fit a little too much ice cream for the kid, or it just seems so

It seems that I don't have the strength of a hero in my hands, the ice cream was just from the Klatronic ice cream maker, that is, not stone, but I broke it like there was nothing to do.

I'm afraid I got a bad spoon. Mine serves me regularly. Moreover, I do not consider the layout of cookies or cupcakes by it, the dough there is quite soft. But I scrape ice cream out of the freezer, I'm so alive and well, it works with a bang.

But I have another joint in my spoon. I can't get a uniform ball. This arc that turns over the spoon when the handles are squeezed, it perfectly passes over the ice cream, cutting off a few mm. I like this part of the ball and it doesn't bother me that a small part of the ice cream remains in the spoon. But the ball is uneven.
I do not know how to explain, I hope that the photo will be clearer. The arc reaches approximately to the middle of the spoon, after which the ball falls out. In total, we have a half that was not in the spoon at all, and the second - a part cut with an arc (with cracks), the second is even.


How do you work with this spoon? What to do with it so that the ball is uniform?

I think those cat with a round cup will fit a little too much ice cream for the kid, or it just seems so

children are different and also tend to grow up. But I like flat ones better. These are the ones I stare at.

I have both flat and cylindrical molds. The flat ones from Ikea are the most beloved and comfortable ones. Cylindrical - ice cream is heavy, it may not stick on a stick.

And about the balls - it seems normal in the photo. I have the same. Straight, so that the ball was round - no, not entirely, with a fold. True, this ice cream is straight from the ice cream maker, not from the refrigerator.

yes, I also like flat ones, and since they are also more convenient, it means to be flat ice cream

and who has silicone molds? well, something like that


Something in Temko no one seems to have written about such, are they inconvenient?

Silpo in Ukraine sells such forms for ice in the shape of a guitar, etc. - they are also suitable for ice cream

Today I bought two packs of 6 pieces of 90r each in household goods (only they are for children from above, like a bunny with ears .. I poured milk and syrup into the freezer (I wonder what happens

I have such a spoon



took on 🔗

By the way, I also want silicone ice cream molds. But there is one BUT: I do not like that they are "all together", if you need only one portion, you will have to take everything out, carefully "warm up" one portion in water and put the rest back in the freezer. It is clear that they are so resistant to freezing, maybe not everything is so scary, and I'm just showing off?

Oh, I liked the molds so much. Are they completely silicone or plastic?

The stand (red) is plastic, and inside there are white molds made of very thin material. like rubber, it doesn't look like a selikon.
Zoku generally specializes in all sorts of bells and whistles for homemade ice cream. Everything is very high quality, soundly, with fiction. But prices are biting.

Yeah, yeah, I understand, I'll try to look. Thank you. Is the leg silicone / rubber or plastic?

manna, plastic leg (looks like a top)

Thank you very much

Who else is without molds?
I came across such a charm today:

FORMS FOR PREPARING ICE CREAM AND FROZEN JUICES of the TUPPERWARE company !!!
The molds are fastened together, creating a strong single chain.
The mold serves both as a holder and a container for melting ice cream.
Thanks to the special holes, the melted ice cream flows back into the mold, so that your children will not get dirty.
The bright set will surely please your children!

I have such molds. To be honest, I'm not crazy about them. Those that are flat are more convenient than stars. The portion turns out to be small, to get it you can just insert one cell into a glass of hot water.

bought such molds cost 38 UAH with free shipping, bought on ebay.com

🔗

cool

Some silicone ice cube trays may work well as ice cream molds.
for example, this is what "Musical" ice cream I managed:

girls who have mechanical spoons, well, how does a ball turn out. How to dip a spoon into ice cream? I get a cut ball, i.e. with a flat bottom. The portion of the ice cream that is round in the spoon and that is flat on the outside. It falls out of the spoon perfectly, but I want a round ball. Who will tell you the technique how to collect ice cream

You need to roll a spoon over the ice cream so that it rolls into a ball inside the spoon

You need to roll a spoon over the ice cream so that it rolls into a ball inside the spoon

Thank you. Here we watch a video tutorial, but I can't find one. How to roll with an oval spoon, but it seems like a hollow ball turns out, but you need a full one. And if the ice cream is in a bucket, then you can't roll it, but the ball should be