Parts and services

[I will never buy equipment of this brand again!]

I have a Panas2501 - still under warranty, the coating from the spatula comes off in rags, called the service, they said that the case is not guaranteed, like it is a consumable, like paint in a printer. But in order to buy a shovel, you need to come to the service (on Shabolovka), write a statement, then after a certain time come and redeem this shovel (about 700 rubles) if you contact other services there it will cost about 900 rubles. I will never buy equipment of this brand again!

Just a cry from the heart! Well, a small piece of iron cannot cost 1/5 of the cost of the device!

[stefani71]

stefani71, on eBay the spatula costs US $ 18.63 and delivery EUR 2.90, sent from Bratislava ...
Search, maybe you will find cheaper ...
🔗

Stephanie, peel off the spatula and use it without cover.

In general, it's strange ... my light blade (with an old coating) peeled off two years after the start of use. Black has been out for a year and a half now. But the coating near the shaft on the same light bucket, which is three years old, has climbed. But on circular scratches (apparently appeared from salt), the coating does not climb.

Pakat, thanks a lot! It's just a shame, like a solid company, but the Horn and Hoof service

Rina thanks for the idea, I'll try, while I read it, here is that you can use a spatula for rye!

Pakat, thanks a lot! It's just a shame, like a solid company, but the Horn and Hoof service

Would you try to buy a consumable for other HP, that's where the service is (more precisely, the absence for ANY money) well, except for LG ...

I want to warn the owners. The paddle is attached to the shaft by drying dough inside the central hole of the paddle.
If this dough is not carefully removed, the bottom of the shoulder blade can be scratched by the dry dough the next time it is baked. The coverage is broken.

Now the question. Where to buy a spare blade and how much it should cost, I found it easily for 790r, but something seems expensive.
After the violation, the coating will peel off gradually, you do not want to look for a spare wheel later when everything is gone from sale.

Thanks in advance for your reply.

I want to warn the owners. The paddle is attached to the shaft by drying dough inside the central hole of the paddle.
If this dough is not carefully removed, the bottom of the shoulder blade can be scratched by the dry dough the next time it is baked. The coverage is broken.

For example, first of all I pour 1 tbsp. l. (1 teaspoonful) on the pin of the spatula so that it penetrates into the grooves between the spatula and the pin, the spatula rotates freely and all dough residues also fly out freely after baking.

And after the bread is taken out of the bucket, I pour warm water into it, let it stand for 15-20 minutes and rinse both the spatula and the bottom of the bucket inside, the pin itself - the spatula from warm water is quickly removed from the pin and does not remain dry and in residues dry dough before next baking

[3draven]

3draven This is the average price of a scapula, alas, it is so worth it. And it is held by the lock (groove on the shaft)

[3draven]

3draven This is the average price of a scapula, alas, it is so worth it. And it is held by the lock (groove on the shaft)

This "castle" is called flat... In general, this is not a castle.

[3draven]

3draven This is the average price of a scapula, alas, it is so worth it. And it is held by the lock (groove on the shaft)

I regret to agree, the price of the scapula is too high. Today I bought a basic shovel for $ 25 in a branded service. For rye bread the same price.
I had to buy it because it was my own fault. The spatula got stuck in the bread and while everything is still hot, I took a paper clip, bent the hook and began to pull it out. The hook was torn off several times, then I pulled out the blade. But the mood was ruined, the scapula was all scratched. Of course, you can use it without problems, but ... if the scratches were not my fault, I would not change.
And it is very convenient to get the shoulder blade with a corkscrew, I tried it. The screw part of the corkscrew itself fits into the hole very well in size, it only touches the metal inner part of the blade (I mean the standard corkscrew, the dimensions may vary).

The spatula is easy to reach with a sushi stick

The spatula is easy to reach with a sushi stick

Thank you.
The most annoying thing is that the spatula got stuck in the bread only 3 or 4 times and with this negligible amount of stuck it managed to scratch the spatula.

Dear bakers! Has anyone come across the replacement of the raisin dispenser with x \ n Panasonic 255? The plastic nod is broken off, which flips the bottom. Now either additives do not pour out, or they do not close at all. I don't think that such a nod can be bought separately.))) We should find it in St. Petersburg.

[lenka23]

lenka23 Unfortunately, the part catalog on SD 255 has stopped opening for me, I just see that it is child number 16 and part number no
try to find it through a service, for example Orbis, I took a bucket from them there.

I ruined my last shoulder blade. I called Kashirka and said that any shovels are available for 790 rubles. I also asked about the bucket. The girl replied that the coating is black, in the latest models it is bad. Many complaints. You can say you can screw on the old bucket, whoever has it. And for information, the new one costs 3010, and from the old models 2270. And this is the cost of the stove itself for a little over 5 thousand. And my bottom near the stove was scratched almost immediately by sand and salt.
So you will think some kind of g. Are doing.



Now I scratched my shoulder blade with a fingernail - it's no longer a pity. And the nail not like Lieutenant Rzhevsky not hurt, and the scapula peeled off to gray. Well, I did it with a nail file, so it caught fire as much as silver. Maybe buy one, and rip one off, if it's so easy
What is the coating under the Teflon? I’ll ask, if I don’t forget, at the service center.

Old bucket ADA12R1321 🔗 Light coating, for models SD-251, SD-253, SD-254, SD-255. Also suitable for models SD-256, SD-257 where a similar bucket with a dark coating is used. Does NOT fit SD-2500, SD-2501, SD-ZB2502.
New bucket ADA12E165 🔗 Dark finish for SD-2500, SD-2501, SD-ZB2502. Previous models (SD-254/255/256/257) DO NOT fit

The buckets are distinguished by the ADA29A115 agitator unit. Drive (removable unit with shaft, bearing and gland) of the buckets of the Panasonic bread machine, for models SD-207, SD-251, SD-253, SD-254, SD-255, SD-256, SD-257. The kit includes an o-ring and hardware.
Does NOT fit SD-2500, SD-2501, SD-ZB2502

A darker finish is more scratch resistant. You can safely use a scratched spatula

[sazalexter]

The girl from the service center mentioned some kind of connector when replacing the buckets and promised to show how to change the old (black) bucket to an even older model, i.e. from a dark coating to a bucket with a light one. The men said they were unscrewing something and screwing a light old bucket
sazalexter Do you think it's okay if the shoulder blade is peeled off? But she's still cunning. Can I remove Teflon with sandpaper?
Has anyone tried it?

[Scops owl]

Scops owl When changing the bucket from dark to light, change the agitator assembly. Or change the bucket assembly.
The fact that the shoulder blade has peeled off is nothing terrible for me for many years it is generally ... not presentable, the main dough is not baked on it

I ruined my last shoulder blade. I called Kashirka and said that any shovels are available for 790 rubles. I also asked about the bucket. The girl replied that the coating is black, in the latest models it is bad. Many complaints. You can say you can screw on the old bucket, whoever has it. And for information, the new one costs 3010, and from the old models 2270. And this is the cost of the stove itself for a little over 5 thousand. And my bottom near the stove was scratched almost immediately by sand and salt.
So you will think some kind of g. Are doing.

Dissolve salt and sand in water ... and pour it into flour.

Dissolve salt and sand in water ... and pour it into flour.

I have been doing this for a long time By the way, the coating of the new blade (light) is worse than that of the black one - it wears off faster

Hello. I read something and don't understand, so which bucket is better? Black or light?))))

Hello. I read something and don't understand, so which bucket is better? Black or light?))))

Vera, I'm certainly not a specialist. I’ll tell you how things are with me. I scratched the black bucket when I did it according to the instructions for cotton - dry down (flour, sugar, etc.)Now I do the opposite - the liquid is on the bottom, and everything else is on top. I try to dissolve sugar and salt (when I remember), it doesn't seem to scratch anymore. It remains as it is. But the new shoulder blade (light) peeled off. I bought it in June somewhere. Like this

But it is interesting in which case the best mixing of the ingredients occurs when the liquid is on top or bottom. Theoretically the same, but in practice it should not be the same. I do not mean a complete batching cycle, but a partial one. Suppose, in one version, the dough is already kneaded after 10 minutes (the rest of the time before the start of the rise, it just walks around the bucket), and in another version, after these 10 minutes, everything has not been completely mixed yet.
Scratching the bucket with salt and sugar - yes. The original spatula cost $ 24, and you can only guess how much the bucket will be. And the service of spare parts inventory does not, everything is made to order. I bought a shovel, so they took it off the window. I have never seen the bucket in the window (the service is on the way to work, I go sometimes).

My shoulder blade bought in June

[Scops owl]

Scops owl I have even cooler, five years at work, I just do not pay attention to the dough does not stick, and okay.

[sazalexter]

sazalexter I don’t pay too much, I would know what I’m spending more than 700, and I also went looking for an office, spent time to ... buy it! At my work now, the harmfulness is more abrupt, so these are the little things in life. Everything in comparison is cognized.

Good day.

Unsubscribe here for spare parts for SD-207.

The saber stove has been in operation for 5.5 years, everything works as usual, however, the bucket (and especially the stirrer) has already peeled off enough Teflon, and I wanted to change it. The service said that the bucket for the 207th (assembled) is available for order, at a price of something around 2000r.

However, the service technician warned that the main board by the 207th was no longer available (discontinued), and a new bucket for the five-year-old 207th was not a reason to order. Along the way, I heard a lot of a heartbreaking story about a grandmother crying in that service, whose SD-207 controller board just welled up ...

Total: it was decided not to buy a bucket. Ordered and paid for 2502, awaiting delivery.
And the 207th will remain for "backup", so to speak. Or you can send a bucket with a stirrer to Sibovar, they will spray a new Teflon.

Hello! Kindly, who has a panasonic sd-207 bread machine model, write down the dimensions of the paddle for kneading the dough: the length of the main part of the paddle, the height and length of the notch (if you can call it that) above the main part, and the hole diameter (8 or 9 mm?). We have an old oven, it makes no sense to give a thousand for delivery, but a friend promised to do it, only the dimensions are needed. Help me please.

Tell me please, if a measuring glass from a bread machine is lost, what can be replaced? an ordinary measuring jug is possible? how to dose correctly now?

[Akhtyusha]

Akhtyusha, Water in any measuring glass, flour with scales, and there will be happiness

: girl_red: thanks a lot !!)))

Hello everyone!
Who needs any app. parts from Panas 2501, please, I will help;)
In St. Petersburg.

My shoulder blade bought in June

I knead any dough with her alone, because a special spatula with a comb, for rye once bent and I don't use it. Maybe this is a warranty case and you need to contact the service center, because the stove is still under warranty? I look at your shoulder blade and cover some other ...

Who knows, in Moscow it is really possible to find a bucket for the 2502 model?

Try it here 🔗

Thank you!

I have a model SD-ZB2502 bread maker, the raisins and nuts dispenser is broken. Where can you buy a new one?
thanks in advance for the answers

[Venera007]

Venera007, In service, list 🔗

Thanks for the information.
It is necessary to go to the SC, for us it is still a little problematic.
Is it possible to order via the Internet with courier delivery or Russian post?

[Venera007]

Venera007, To search or order part number ADA44E165-H0 services who have online stores when servicing
🔗
🔗
🔗
score
🔗

Let me tell you about the Orbis service center in St. Petersburg, on the Oktyabrskaya embankment. The bread maker was bought a month ago, it baked perfectly, but the hellish squeak during kneading and the bucket was shaking. After reading the forum, I decided that I needed to fix it. They took me to the service and left. Today I come to pick up (by the way, they said that they had changed the drive), they expose me a bread maker, I look inside, check for a bucket and a spatula and ufiguevay. The edges of the bucket are dirty, stained, I lift the spatula there a dried shmat of dough. But I remember that I washed and rubbed everything perfectly! What do I say? Girl: "Well, they probably baked it, checked it." I say, "To check the creak, just press the button, girl, this is not my bucket!". I take it out and look into the HP. All the walls are yellow, tanned, stained; brown flour lies at the bottom and along the edges! I say, "Do you understand that I handed you over a new, clean bread maker? She is 20 days old and I couldn’t get it anyway,” The girl responded by offering to wash it.
In short, she refused to pick it up, today my husband will go there to sort it out.
I'm just shocked, so brazenly they never tried to deceive me. Be carefull!
I am very sorry that I did not take pictures of everything before handing over to the service.

[Qsu]

QsuHere are the cases. We are waiting for the continuation of the story, it looks like they mixed up the stoves

Yeah .... After such a story, after putting something in for repair, I will take pictures .. I hope that I won't have to.

And I actually had a bad luck today (((
I was in the kitchen, the bread maker (SD-ZB2502) was turned off. Heard a sound like the yeast dispenser clicked. At first I did not pay attention, because sometimes the dispenser did not close immediately, but later. Then she looked in and was horrified - the plastic part of the case cracked ...
The bread maker is only two years old and has not been used very actively. What to do? To the service?

[Iriska25]

Iriska25, Try to take a photo and post it here, we'll think about what to do next.

the plastic part of the case cracked ...
The bread maker is only two years old and has not been used very actively. What to do? To the service?

There are no traces of falling, no other blows to the body. And the instructions on the last page say that the service life is 7 years. If the service is capricious, you can write a complaint to the manufacturer.

Hello, where to buy a shovel for Panasonic SD 256, thank you

I am very sorry that I did not take pictures of everything before handing over to the service.

What a horror ... It's a shame that the bread makers don't have a serial number. Maybe, really, before handing over to the service, somehow mark and put a service mark about it in the receipt?

It's a pity that the bread makers don't have a serial number.

How is it not? Must be required. And when it is accepted for repair, then it must fit into the receipt.

Hello everyone!
Who needs any app. parts from Panas 2501, please, I will help;)
In St. Petersburg.
[/ quote
If the offer is still valid, the dispenser needs a plastic retainer, it is also a spring-loaded "dog", it is also a hook

Quote: kook1 on Jan 16. 2014, 18:16
Hello everyone!
Who needs any app. parts from Panas 2501, please, I will help;)
In St. Petersburg.
[/ quote
If the offer is still valid, the dispenser requires a plastic retainer, it is also a spring-loaded "dog",

Same problem. From everything that I found a complete dispenser worth 1990 rubles