Gennadii
Improvement - an iron dispenser latch on a 3D printer.

Regards, Moderator

________________________ ________________________ ________

ATTENTION:
In Moscow there is an online store with home delivery of spare parts for Panasonic.

🔗 - the main page.

🔗
- page with available spare parts for the Panasonic SD-253.

About three months ago, there were more goods, including spare parts for the Panasonic SD-207 model.
Zoychik
it's a pity that there is no supplement for black bread .. I scuffed it with a knife

and what is interesting about the buckets, there are already three of them ..
Gennadii
Yeah, here is a complete list of parts, and for the SD-207 -

Quote: Zoychik

it's a pity that there is no supplement for black bread .. I scuffed it with a knife
- Yes, it's a pity there are no photos.

Quote: Zoychik

and what is interesting about the buckets, there are already three of them ..
- and, this is generally a secret, it remains to assume that the models SD-253 and SD-253YYDE differ in some way.
AndrewD
Quote: Zoychik

it's a pity that there is no supplement for black bread .. I scuffed it with a knife

How is it not? 🔗
ADA04A105 - conventional paddle
ADD97G132 - shovel for rye bread
Zoychik
but it was not .. you see, they brought it
Thank you!
AndrewD
Well no.
It's just that Gennadii has too strict a selection of "Panasonic + SD-253".
And accessories can be purchased not only in the online store, which is not always convenient, since Muscovites will need to receive them in one of the Panasonic plaza, but also in the nearest Service Center 🔗
The pricing policy in this case is determined by the SC, it may turn out that it will be even slightly lower than in the online store.
Moreover, in the SC you can purchase not only accessories, but also individual spare parts. In general, by calling the SC you can find out the details.
ogeon
Please tell me, if the bucket is scratched with a knife (about 20 times), in 4 places at the bottom of the scratch something dark appears, and a spatula for the dough is scratched, can you now cook something in such a set? Don't ask me what happened, this vandalism is not my doing, and now I am on the verge of a nervous breakdown ...
And another question: what is the bucket covered inside? (if such information is not secret ?!)
Gennadii
In my opinion, the bucket is a candidate for replacement; however, it is too early to despair - the main thing is that there are no burrs (along the edges of the scratches), and someone, on the forum, wrote that all the time before using cotton, he lubricates the sides of the bucket with oil (for ease of extraction).

What kind of non-stick coating is there - to be honest, I don’t know (I don’t need to know anything like the coating and coating).
ogeon
Thanks for the support! Burrs are easily removed by hand, on one side there is a coating, on the other - a metal layer. I'll try to lubricate with oil ... My stove is only 1.5 weeks old, I change the bucket while the toad is choking.




She baked bread with nuts and raisins in a scratched bucket. Fortunately, there were no changes in the quality of the baked goods! The dough has risen, the raisins are perfectly mixed, the finished bread is not burnt and easily separated from the bucket. So the experience so far is only positive.




Quote: Korata


Glad for you :))) Have you greased the walls or tried to do nothing?
I have already baked 2 times in a scratched bucket: the first time I only greased the scratches with oil, the second time I did not grease it with anything. There was no difference between these two options and the original baked goods! Long live Panasonic!
Ivan
AMU31B-530_ Panasonic Bread Maker Belt 450 RUR

🔗

AMU31B-530 _Belt for Panasonic Bread Makers.jpg
Parts and services
Nira
A broken plastic hook in the dispenser that holds the inner lid. I found this when I was washing the bread maker. The lid was closed. But now the dispenser cannot be used.

What to do? Do you really have to purchase the entire dispenser entirely? Or will they still be able to fix it in the service?
And another container for the SD-253 ADA12R132 bread machine is it (dispenser) or not? I did not find a picture. Help me figure it out please ...
Ivan
Container, usually mean - Bucket.
2326350
I have a problem, for some reason a bucket is scratched with a spatula when kneading the dough, so not very much, presumably with sugar
Someone has similar problems
I have SD-255
Who knows if you can buy a spare bucket, is it suitable from 253?
bauerma
Quote: ogeon

Please tell me, if the bucket is scratched with a knife (about 20 times), in 4 places at the bottom of the scratch, something dark appears, and a dough spatula is scratched, can you cook something in such a set now? Don't ask me what happened, this vandalism is not my doing, and now I am on the verge of a nervous breakdown ...
And another question: what is the bucket covered inside? (if such information is not secret ?!)

I would also like to know what kind of materials are there under the top layer?
The trouble is not whether it is possible to cook bread (or any food) in a scratched dish, but what will enter the body from this dish.
They will immediately object to me that these are small doses and nothing will come of them, etc.
And knowledge about the composition of any products that get inside us can be very useful.
Thank you.
Aglo
They will immediately object to me that these are small doses and nothing will come of them, etc.
And knowledge about the composition of any products that get inside us can be very useful.

In about the same vein, the site raised the issue of yeast safety, in particular, Saf-moment.
It seems that there was no objection to the fact that answers to such questions are received after long and not cheap laboratory studies. Which of the forum participants can have the necessary equipment at work?
Doubts gnaw - pay the cost of the bucket (it is not in short supply) and sleep well.
Alinchik
Good day to all!
Well tell at least someone, are there other forms for HP on sale, are you specifically interested in forms for Panasonic 255 ?!
I really want to try baking the cake, but to make it round
Elena Bo
There are no replaceable forms for bread makers! If you want a round cake, knead in a bread maker, after the last settling, put it in the desired shape, let it come up for the last time and bake in the oven.
Celestine
Quote: Alinchik

Good day to all!
Well, tell me at least someone, are there other forms for HP on sale, are you specifically interested in forms for Panasonic 255 ?!
I really want to try baking the cake, but to make it round

The forum has at least 2 threads to discuss this particular issue. There are only inserts in the bun bucket, and there are no other forms.
Alinchik
Quote: Elena Bo

There are no interchangeable forms for bread makers! If you want a round cake, knead in a bread maker, after the last settling, put it in the desired shape, let it come up for the last time and bake in the oven.
It is very, very sorry that there are no such forms!
Thank you so much for your answer! I will definitely try and even postpone
I will not, I will bake today!
And in general, it's so great that there is such communication that everyone helps each other with different questions!
ma1max
Please tell me where you can buy or order a bucket for this model
sazalexter
Only in service centers or here 🔗
MaDaMa
I also have a 207 model, the buckets differ from the other models ONLY in size (I specifically compared them). If you order exactly the same bucket as in the package, wait about 3 months, the cost is around 2500 rubles.
I did it easier - I ordered a bucket from 255 models (it is REALLY JUST LARGER), and WITHOUT A LOWER BED, that is, it turned out just a bucket with a hole in the middle. I waited for him for about 3 weeks, it cost 1420 rubles. At the same time I ordered a blade for kneading - 490 rubles.
I twisted the frame from the old bucket, with which the bucket is inserted into the HP (3 screws - a slight movement of the hand), screwed it to the new bucket (it becomes excellent in size), and that's it - I have a wonderful new bucket with a new blade !!!
If necessary - I will give the address-coordinates, write. In St. Petersburg.
ma1max
thanks for the answer. already ordered for 207, almost 2 months have passed

Quote: MaDaMa
Get it - if it's not strained, write down the price and the exact date for which it came, okay?

by the way, the price is 2.7 tons.
MaDaMa
Damn, what a pity that I saw your message so late, because I have the opportunity to transfer to Volgograd in the summer (I myself come from there, Frolovo - a familiar name?) !!!!
And what a blessing that I thought of trying on a bucket of 255 models for my own !!!! It is much better than the native one, since it is designed for a larger size of bread, therefore, when kneading, the flour does not fly so much in different directions and the bread practically does not support the lid, since I knead based on proportions to recipes for model 207 (in 255 models - larger proportions).
And most importantly - WHAT HAPPENED TO YOUR BUCKET?
ma1max
I know Frolovo
the bucket inside is peeling, because of this, the bread turns black and it is difficult to pull it out, since it burns.
MaDaMa
The same bullshit was. Plus, my son decided to help - I picked out the bread with a knife. Damn, I almost killed the kid !!!!
The blade, by the way, was also all scratched and peeled off.
orid
Can someone tell me where you can buy the main kneading paddle for 255 model in Ukraine. I gave my native one with fresh bread. While I use "rye" Who faced the situation, Help!
sazalexter
orid In the official service center, look for a list on the website
🔗
29013 Khmelnitsky, st. Proskurovsky Underground, 117
tel. (0382) 70-03-32
orid
Thank you very much!!!!
Mussechka
Good day! We urgently need to find the main stirrer for the stove. There is only one day - tomorrow! Don't let me die, please tell me reliable information, where can I buy?
Thank you all in advance!
Pakat
Mussechka, let my daughter call - 🔗
sazalexter
Mussechka Don't be discouraged even if you don't find a wheat shoulder
I'll tell you a secret, rye shoulder blade copes wonderfully with all types of dough
Mussechka
sazalexter, thanks! That is, with a rye spatula, you can make a regular batch?! And you can take your time with the search for the usual ?! Thank you very much! I also told my mother that she would try to knead rye ... We were just very, very upset that there was not a complete set ... I have no experience with a rye spatula, because 254 model ... Thank you!
sazalexter
Mussechka Of course, you can also make wheat bread. The main difference between the Rye Shoulder and the Wheat Shoulder is that it is in the form of a comb and is designed to facilitate the kneading of "heavy" dough, rye, with bran, with flakes, etc.
You can look for a shovel in Moscow in service centers:
Service center "Panasonic Atelier" st. Rossolimo, 17 building 1 (495) 725-05-65
🔗
Serv company st. 3rd Yamskogo field, house 2, bldg. 13 (495) 741-75-79
Viktel st. Barclay 6, building 40 (495) 227-64-90
Panaservice st. Novopeschanaya, house 18 (495) 742-17-22
Panaservice 15, Lubyansky Ave. (495) 514-40-30
st. Bolshaya Pochtovaya d.36 (495) 380-30-83
ALKIONA highway Dmitrovskoe, 139 (495) 913-39-39
Viktel Kutuzovskiy proezd 8 (495) 762-67-52
Talion Service ave. Leninsky, house 60/2 (499) 137-00-96
Alvis -Service st. Novokuznetskaya 4/12, building 1 (495) 959-55-00
In Tashkent:
SONIKO + 700097 Tashkent Chilanzar block 9, building 25, apt. 3 (99871) 278-46-50
Teleservice 100000 Tashkent, st. Ak. Yahyo Gulomova, 38 (99871) 233-17-56
Teleservice 100000 Tashkent, st. Ts-26, Gulobod, 1 (99871) 249-67-67
For Almaty - 8-7272-98-09-09
Mussechka
Thanks to all!!! I found it and my daughter has already bought it Bought on Gorbushka at this address: Moscow,
Bagrationovskiy passage,
house 7, pavilion No. B1-001
+7(495) 737-46-61/60
from 10:00 to 20:00

If suddenly, who will need it too. There are blades for both rye and regular ... the price is 291 rubles.
Hope
Mussechka And by chance there were no buckets? I'm not getting there.
Suzy
Hope, look at this store there are buckets for Panasonic:
🔗
Gheder
Does anyone know if there are new (diamond fluoride coated) buckets and stirrers for the 256/257 models already on the market? I found out in Panasonic Plaza, there are only old ones.
sazalexter
Gheder what happened to the old one?
Buckets and shovels are also available in Panasonic services
Gheder
I'll have to call SC, thanks for the tip.
Everything is fine with the old one, I just want the second. While something is baking in one, you can load ingredients in the other. And I also want to cook in one oven with raisins seeds, nuts, sesame seeds, coriander, salt and sugar. And in the second, completely eliminate "scratching" substances, even a solution was prepared from salt and sugar. In general, the purpose of the acquisition is an experiment and a reserve
Ladaha
Now there is a lot of information about the dangers of Teflon coating, Including Elena Malysheva in her program spoke about this several times ... So I think, maybe buy a bucket from 257 model for my 255 model? But another question, will it fit there?
Rina
The bucket will do. 254/256 and 255/257 are clone models, differing only in the coating in the bucket.
sazalexter
Ladaha The SD-257 has a Teflon coating as well as other products that advertise themselves as ceramic. Just different fillers in the manufacture, carbon, ceramic, etc. etc.

Quote: Ladaha

Now there is a lot of information about the dangers of Teflon coating, Including Elena Malysheva in her program spoke about this several times ...
As the classic said:
Food is tricky. You need to be able to eat, but imagine - most people do not know how to eat at all. You need not only to know what to eat, but also when and how. And what to say at the same time. Yes, sir. If you care about your digestion, my advice is not to talk about Bolshevism and medicine at dinner. And - God forbid you - do not read Soviet newspapers before dinner... Patients who do not read newspapers feel great. Those whom I deliberately forced to read Pravda lost weight.
Mikhail Afanasevich Bulgakov
I’ll add, don’t watch TV
Life is generally harmful
Rina
Information about the dangers of Teflon coating has been thrown into the air for a long time and a lot. There is little reasonable information. I saw one of the direct studies specifically on the release of toxic substances from non-stick coatings. Something begins to "fall out" of these materials only at very high temperatures, when the frying pan, for example, gets hot and already begins to smolder black, and the coating itself begins to peel off. Therefore, you can not heat an empty frying pan. The bread maker has one very big advantage (among others) - you will never be able to heat the bucket during normal operation until black smoke is released.

Here are scratches - this is quite possibly another matter. I do not know how this coating is fixed to the metal surface. But then again, as long as there is just a scratch, the amount of anything that comes out is negligible. And when the coating begins to come off in rags, then you need to seriously think.
Ladaha
The fact of the matter is that in the program "Live Healthy" they talked about research about the harm of teflon ...
It impressed me and I changed my frying pan to a cast iron ...

I found it- zhitzdorovo.blogspot.com/2010/10/vred-teflona.html
Rina
Malysheva's programs are frank advertising. In a few years, when everyone has thermolon pans, it turns out that this coating does not cause a rise in cholesterol, like Teflon (by the way, and who and where conducted the research? The fact is zero point horseradish), but, say, impotence. And there will be a new coating, absolutely safe, for which all the dishes will need to be changed.

Well, everyone decides for himself. Europeans and Americans wouldn't use non-stick coatings if ... well, that's another topic.

On this topic: yes, buckets are interchangeable.
Onega
Today I made my first bread in a bread maker 257. I noticed that an ordinary spatula slightly scraped the bottom of the bucket. How to assess this? Is this all so or is it a defect? What to do, then order a new bucket?
sazalexter
Quote: Onega

Today I made my first bread in a bread machine 257. Did you notice that an ordinary spatula slightly scratched the bottom of the bucket? How to assess this? Is this all so or is it a defect? What to do, then order a new bucket?
Do not worry! Many people have it cracked, I also have it scratched by salt, or rather its hardly soluble fractions, it happens from dry raisins or from seeds, this is quite normal. YOU should have seen my HP. Such a fighting machine. Workhorse in one word. Few HP can withstand baking 415-450 loaves per year
Poul
That is why it is advised to dissolve salt and sugar in water before adding it to the oven!
Sherly
And today I baked my second bread)) And the choice fell on "very tasty cake" from Elena Bo Everything worked out, everything is fine, but ... I began to wipe the stove and saw that two small dots appeared on the plastic inside the dispenser (plastic, as it were melted) What is this? From what? The dispenser contained: raisins, walnuts, almonds and some chopped dried apricots ..... Has anyone come across something similar? And immediately another question arose. Can you buy a dispenser separately?

All recipes

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers