Kenwood Kitchen Machines

Already suggested, I don't really want to run into rudeness again ... Although I don't have CM Kenwood, I actively read. Sorry for the advice ...
But! Girls, watch how Rita mamusi designed the Redmond 6 multibaker theme, the front page has an active list of theme recipes, both decorated and unformatted. Decorated, as it should be, are located in the thematic section, undesigned directly in the multibaker's theme. But not a single recipe or experience is lost. By the same principle, I moderated the Waffle Iron and Keksnitsy themes, it seems. But some completely rejected such a scheme in Tartlets. And the scheme is very convenient. This list can be transferred to any topic that you consider to be the main one and where, in your joint opinion, this list should be located. This is a common and generally accepted scheme earlier on our forum.
On this I retire ...

I'm still talking about the topic with recipes that are not designed as recipes, and Lena too.

So I'm talking about her ...

[Ukka]

Ukka, Olya, I also like the idea in Multipekar. Precisely to recipes! And the most important of the following discussions can always be added to the unformulated recipe.
There are such links on the first page in Boltalka - to interesting posts on the operation of the machine and other issues (fragmentation is ours, which is like a bunch of topics ...), and Valeria VRad I shared my saved ones in about the same format, they are also in the Chatterbox at the beginning of the topic.
The same thing is missing with recipes!

[Ukka]

Ukka, Olya! You shouldn't be leaving! Please come back! I don't have Kenwood either. But I want him. I bought many scarce nozzles in advance. I will live, I will definitely buy induction. And I read all the Kenwood topics from the moment I came to the forum. Therefore, I am very rooting for them.
So that's it. The main question, which is now being heard aloud or clandestinely, is that a moderator is needed on the Kenwood topic. Better two moderators. One is more on the technical side, the other is more a housewife in a good sense of the word housewife, advanced, so to speak. This advanced housewife should at least know how posts are removed from the topic and how recipes (unformulated) are brought to the first page. Well, and do this hard, tedious job regularly. And gradually existing now 64 topics can be collected into one, removing a significant part of unnecessary material from there. But the main thing is, at least from today or tomorrow, to start work at least concerning the present. Then the question of all Shtebov's chatters, Kenwood's chatters, Princess's chatters will disappear forever. And if you need to chat, then whoever wants to, let him create at least a bunch of chatters. Shoutboxer Tanya, Shoutboxer Light, Shoutboxer Alexey. You need to come in there and talk about anything. But don't take anything from Kenwood, from Steba, from the Princess. That is, the question of the presence of a moderator.
Olya! Could you take on this? As a moderator not for technical, but for the main part - taking out recipes, removing unnecessary words after three to five days? (For example, what I just wrote and that is not directly related to Kenwood). You say that you have a certain experience?

[LudMila]

LudMila, but what prevents you from doing the same in Recipes?
A list is collected with recipes, decorated and unformulated, and this list can be inserted exactly into the topic where you see fit. I think Olya knows how to do this and will do it, if you decide where ...
Masha Ivanova, thank you for your trust!!! But I am relatively free sometimes on weekends, on weekdays I run into the forum at work and in fits and starts. You can take a few volunteers, share topics, and slowly build a list. I don’t promise, but maybe tomorrow I’ll have time to do it.Throw a link where to start? I probably won't be able to moderate it all the time. And the technical part, so here is Olya ass, she knows everything about Kenwood !!!

Then the question of all Shtebov's chatters, Kenwood's chatters, Princess's chatters will disappear forever. And if you need to chat, then whoever wants to, let him create at least a bunch of chatters. Shoutboxer Tanya, Shoutboxer Light, Shoutboxer Alexey. You need to come in there and talk about anything. But don't take anything from Kenwood, from Steba, from the Princess.

I don't understand. What's wrong with Kenwood's chatterbox or Steb's chatterbox? The topic of Shteba has long been such a swamp. It's just that Kenwood is more multifaceted. Such a wonderful idea of ​​chatting about Kenwood turns into some kind of pioneer squad. Everything according to the ruler, strictly according to the plan, the recipe there, the recipe here, vyaknul unnecessary - urgently remove.

Such a wonderful idea of ​​chatting about Kenwood turns into some kind of pioneer squad. Everything according to the ruler, strictly according to the plan, the recipe there, the recipe here, vyaknul unnecessary - urgently remove.

Class !!!

[Irlarsen]

Irlarsen, Irin, before let her be, chatter! No pioneer units.))
The question is then how to somehow isolate and preserve the really important from it according to recipes. There is a search, but this is not quite right, because the word must be set exactly.

in order then to somehow isolate and preserve the really important from it according to recipes.

I'll do it in a week .. come up with a name!

I don't have Kenwood either. But I want him. I bought many scarce nozzles in advance. I will live, I will definitely buy induction.

Did you know that the old / new Kenwood low speed jack is different?
Now buy one type, and then you will need an adapter for all? And this is not the best idea, especially when you roll the dough and then cut it? These are different attachments and the adapter changes with more than one light movement of the hand.

.

[zvezda]

zvezda, Olya, why one more topic ??? Why not make an active list of recipes here ???
However, I do not impose my opinion, do as you see fit ...

why another topic ???

For round counting
To be 65!

[Twig]

Twig, Veta! I already have almost everything that differs between 080-096 and 9040-9060 purchased. It happened.
So I'm not afraid of what you said. And HOW there are all sorts of AT too. The question will be that the excess will have to be sold. But this is not the worst thing.



kartinka, aha, Marina! Go to the chatterbox! It’s just about Kenwood, nothing is written! Ha ha ha!

These are different attachments and the adapter changes with more than one light movement of the hand.

Yes, it changes quickly, it's absolutely not difficult. Of course, it is more convenient to have suitable attachments, but nothing criminal if through an adapter. I'm in the subject, if that.

My rolling attachments work through an adapter. And I do not experience any difficulties, everything is removed, dressed without problems. And the adapter itself can be easily removed from the nozzle.

My rolling attachments work through an adapter. And I do not experience any difficulties, everything is removed, dressed without problems. And the adapter itself can be easily removed from the nozzle.

Still, rolling out does not have such a load as a cube or a meat grinder. It's scary to me to press from above. I would take a meat grinder, but I have an old nest, so I doubt it.

Still, rolling out does not have such a load as a cube or a meat grinder.

Here I have a cube, and a meat grinder, and a low-speed shredder through an adapter. Well, I rarely take out the shredder, and the rest - through and often. But from the new nest to the old attachment. It happened so. Structurally, I do not see the difference (there are nozzles for a new socket, I compared). The same connector fits into the km socket, like the new attachments. If the lever is lengthened, then by a few mm, but it is reinforced by the thickness of the adapter. He's so powerful, cast.
True, I do not really understand, why press from above? It somehow slips by itself, I move it a little to the vent. Well, the thickness of the pieces should be appropriate.
Here in the spiralizer you have to press a little, yes.

I would take a meat grinder

Hello ... and I had, which I did not say ... I have a new one, but I need to go to another nest, to a new one ... let's swing? !!

Hello ... and I had, which I did not say ... I have a new one, but I need to go to another nest, to a new one ... let's swing? !!

I have not yet. Now we will share the existing meat grinders with my mother (according to my feelings, her technique is already covered) and I will think what and how.

Still, rolling out does not have such a load as a cube or a meat grinder. It's scary to me to press from above. I would take a meat grinder, but I have an old nest, so I doubt

The grater-slicer works fine for me

The grater-slicer works fine for me

Which is the low speed one? Great news, but I was afraid of using the adapter.

Girls! There is a suggestion to write something about nozzles in this thread about nozzles
https://Mcooker-enn.tomathouse.com/in...on=com_smf&topic=121798.0
This is me not in terms of criticism to you, but in terms of the fact that there are two main topics about attachments on the site. In this one. to which I gave a link, it currently has 327 pages, that is, it has a lot of useful tips on attachments already written, right from the very first pages. You can find a lot in the search for a topic. And there is another topic about nozzles, there are like 21 pages. So let it remain in this form. And we will not get confused, we will write about attachments only in the one with 327 pages. Otherwise we will be completely confused.
How do you look at it?

How do you look at it?

I support!!

Me too.)) Maybe also ask the Chief to "glue" that little Temka about the nozzles with the big one and remove it, then there will definitely be no confusion.

Which is the low speed one? Great news, but I was afraid of using the adapter

She is my helper

She is my helper

Here, in the 15th or 16th year, there was a discussion and the people somehow unflatteringly spoke about adapters, so I got stuck in a loop that only my own is needed.

Maybe also ask the Chief to "glue" that little Temka about the nozzles

I tried ... let's get together !! ask

Let's once again read all these 21 or how many pages there are. Let's think about what information from this needs to be left. I. in the end, from one of us, write it again, for example, the day after tomorrow in the topic about attachments, where 327 pages were yesterday. Still, 21 pages are easier to go through than 500 and 1000 pages.

from one of us, write it again, for example, the day after tomorrow in the topic about nozzles,

The question is, who will take it ?? only 2 options! Or you or Luda

[zvezda]

zvezda, Olya! If Luda takes it, I will be very glad.

The question is, who will take it?

Olya, I can basically do something in the evenings.)) Just explain in detail what exactly, I have no experience. You can in a personal, so that there is no off topic not to distract attention.
And right there on the first page there are links to Miranda's posts, which now contain a sad message "post on moderation" ...

Girls, I want to buy a harvester. I called the hotline, but it didn’t work, it didn’t drop the dial tone from my home or cell phone. I called yesterday.

I want to buy a harvester. I call the hotline, but it doesn't work

What car do you want? What phone is the reset going on ??

What car do you want? What phone is the reset going on ??

Kevud. RU. Only here I wrote immediately stopped dumping and phoned. : oops: Thank you




Girls, please advise which car in my situation is better to buy. There is a Kenwood cook multi kitchen machine, but the package is closed and has never been used for some reason. In addition to it, you need a powerful combine for kneading any dough.Now the action is plus 4 nozzles and they also say that the dollar will rise very strongly since the new year, that is, as I understand it, you cannot buy it. I would like the Titanium 1700 wt, because it seems more reliable, because the cooking chef often complains that it breaks. I'm not fond of confectionery. Of course, Cooking Chef is cooler, but it doesn't seem so reliable. Please advise something.

Girls and boys. Please tell me "Kenwood KVC5100 kitchen machine" - is it worth taking? There is a special offer in the Globe: discounts on various equipment for chips. For 15 chips and a surcharge of 16,990 rubles, this Kenwood is given. My husband's sister needs a planetary mixer, because from her mixers she only has a whisk to the Brown submersible blender. 15 chips - you need to buy goods for 6000r. That is, I can help her now buy this car for that kind of money (she lives in the Rostov region, we would have brought her to NG and brought her there). So I think: is it worth it to take this Kenwood? By the volume of the bowl, it will definitely be enough. And in terms of other parameters, how is this car? In plan, beat, mix, knead the dough.

[Anna]

Anna, you throw a cry on the forum, as if someone will give the chips !!
We already wrote that the car suits, look for yourself here!

[Olya]

Olya, do you not believe in me that I can't get anything for 6000r? I need to buy a gift for NG teacher, and I have already planned a bunch of purchases for myself
The main thing is that my memory does not fail me - this model can be taken. I read you here sometimes.

you don't believe in me

I??? Into you ?? I believe I believe .... you will gain even more ..
I don't remember who, but someone wrote .. or look, maybe there is a topic ...
If for myself, I would take, not the amount so as not to risk it ... I mean for such a technique ..

[Anchic]

"Kitchen machine Kenwood KVC5100"

Anchic, Anna, this model of Chef Elite has very good reviews from the British on the Amazon. Chef Sens in German is a little worse, but still a solid four. Not bad!

English amazon

🔗

German amazon

🔗

Girls, my colleague puzzled me with a question: my wife wants a kitchen machine, they are looking at the kmix in okay, but I looked, there is only a low-speed socket. And who is our full-fledged budget? I have it, of course, in the price tag up to 20 tons. sent to boshi, but decided to clarify here.

[Anita]

AnitaThe Sense in Globe is discussed above if you have this network.
Or KVC 3100. But there are 3 sockets, and the capacity is 1000, like a KMX with 2 sockets.
Maybe, really, Bosch see?

[Svetlana]

Svetlana, and what kind of Globe? Do they have a website? Suddenly there is.

[Anita]

Anita, girls, here's a community on her, pretty good! There will be no questions later ..

[Svetlana]

Svetlana, and what kind of Globe? Do they have a website? Suddenly there is.

🔗

[Olya]

🔗

Thank you. We do not have it



Olya, the machine is good, but the lack of a high-speed socket is disappointing. The most popular nozzles I have are from the high-speed one.

[Topic separated:]

I bought Sens to my husband's sister. Chose yellow
If anyone needs chips to buy goods for a promotion, I can share. I have 72 more of them I was given "a little" more than it was necessary for the purchase of products. And then they gave a bunch for buying a car

Topic separated: Which Kenwood to take - Chef XL KVL4100S or KVC5100?

Hello dear Kenwood owners! No matter how we admire our cars here, there is nothing perfect, they break down too. I just took my KENWOOD KCC9060S from the service center.
What I will write about below has already been discussed in this thread, but I will repeat it again, suddenly it will be useful to someone.
If your car falls under the five-year service program (it has been extended again, it is valid for products purchased before December 31, 2020), and you have not yet issued a certificate, be sure to issue it so that you do not waste time and nerves later. I don't know how the buyers are being informed now, but when I bought the car, one of the consultants told me that the very fact of the purchase already guarantees a five-year warranty. It is not true.
To the service center for warranty repairs, you must provide a sales receipt and a certificate. If there is no certificate, then the car will be repaired free of charge, provided that 2 years have not passed since the date of purchase.The date of purchase will be viewed on the sales receipt.
If you do not have a receipt, but the car was bought at the office. Kenwood sites, call the hotline 8 (800) 550-74-26, if you need help, they will send you an email.
The certificate is issued here - 🔗... You will need to indicate your name, model and serial number of the car, date of purchase and your email.
The serial number of the machine consists of 18 characters, on one barcode sticker. Located on the underside of the car.
It is very sad that having bought a car for that kind of money, a person does not immediately receive a paper with the promised guarantee, but is forced to arrange dances with tambourines, obtaining checks and certificates. And the consultants on Kenwood's websites, unfortunately, often provide conflicting information.

[LydiaVera]

LydiaVeradear, how nice to see you again, albeit for a sad occasion. And what happened?

[Valeria]

Valeria, Thank you! Mutually!

what happened?

changed the gearbox.