Kenwood Kitchen Machines

[gray]

gray, of course you will understand.
If you read at least diagonally at least 100 of the last pages of the topic, you will immediately understand!
Good luck!

Believe it or not, that's exactly what I read!
Pros of induction:
- Steam cooking
- Cooking "tricky" confectionery
There is also? Or will there be wishes to read 200 pages vertically?

Not only confectioneries, although this is a lot.
It's just that almost everyone who took induction never regretted it. And many of those who did not take it would like to have it afterwards.
This is just a generalization of the experience of our members of the forum. You asked advice?
Induction works fine on your budget. So I would advise her and take it.
I wouldn't recommend cooking or gourmet, because I only have cooking, but it seems to me that it would be enough for your wife for complete pleasure.
And you wouldn't have a headache for a couple of years about gifts for February 14, March 8, birthdays, wedding anniversaries, etc. - attachments to your CM.
Good luck!

Or would you like to read 400 pages vertically?

It would be nice, because it is for people like you that we conduct these topics.

[kartinka]

kartinka, I just saw your question, and all because when you write answers in a row, they stick to the first one and no notification comes to the mail.

I understood, the only difference is that the 096-minus screwdriver is AT, and the gourmet hexagon is KAKH, but with the right nozzles everything should be equally convenient (without an adapter), although earlier the girls wrote that the hexagons are just more convenient

That's right, yes.
Therefore, I was surprised to ask zvezdawhat does she mean

It is much more convenient to work with the adapter (even if you buy attachments of the KAH series) on the low-speed socket on 096!

The AT beam system is convenient for me. I don't know the hexagon KAH.
There is no need for adapters either.

So I wonder how this opinion came about.

Ask my wife ... But what about SURPRISE ?!

It is possible in hints. If you want, you can get out.
If you really want to please your wife with the gadget she needs, and not rejoice at what a fine fellow, then you need to know exactly what your wife wants, what she wants to start cooking, but did not want to manually.

From personal experience, and because people write here, with the advent of the car, they began to cook what they wanted for a long time, but either did once a year, because lazy hands, or did not do it at all.

For example, with induction, I make choux pastry in 10 minutes. And this is not only eclairs / profiteroles, profiteroles cut in half perfectly replace baskets for red fish, caviar, unsweetened soft cheese (which I also make myself now). Profiteroles with pate - very tasty.

And why do I need a second "bandura" in the kitchen in the form of a meat grinder, if the first has it?

The meat grinder is not built-in, but a nozzle. It is a little smaller than a stationary one, and it must also be stored somewhere, like the rest of the attachments.

Here, click on the links, see how much and how people store

Kitchen machine Kenwood (2) # 7663

Kitchen machine Kenwood (2) # 7687

Kitchen machine Kenwood (2) # 7699
Induction and its use have been written here a million times.
For example.
Kitchen machine Kenwood (3) # 4175

There is also? Or would you like to read 400 pages vertically?

I have no goal, and now I have no desire to persuade you to buy induction.

My best advice is any way to ask my wife what she wants - a car + a meat grinder, a citrus press, a chopper (I do not list the matching attachments), or an induction machine.

Well, buy in a strange store, or in an official one. Maybe even in installments, so as not to hit your wallet.

Good luck!

I have no goal, and now I have no desire to persuade you to buy induction.

And don't! Thanks for the link to post 4175! I will study the subject.

Good luck!

And thank you for your advice and answers!

there are two adapters and such an opinion was formed, or the process of fixing and using the socket itself formed such an opinion?

I have one adapter, but I have already written before - the mount, even the adapter, to the car is completely different. There is no this pimp-holder (otherwise I cannot explain) and the adapter itself, as it were, slides sideways when used. He does not hold well, as in 096 and the like. Although it can only be so with me ???

[zvezda]

zvezda, I realized about pimp
Thank you!

[Miranda]

Miranda, girls, explain to me how especially gifted, what kind of pip? does it make sense when using an adapter? or - when connecting directly - as if there is no final turn of the nozzle itself, that is, in gourmet there is no such rigid connection in the low-speed socket as in 096? I read in the branches that the attachment grinder in 096 has a little (tolerable) backlash, but in the gourmet it will sort of slide out under load? ?? (I mean KAH) Especially since the low-speed nozzles are all under load ..... How annoying is it on the volume? Will the nozzle itself collapse? In the hay in the store, I wore a KAH meat grinder - it seems to dress normally and hold, but this is a fitting without a load ...
It seems clear I wrote

If you read at least diagonally at least 100 of the last pages of the topic, you will immediately understand!

Virgos, well, you are sadists.
I remember when I just started asking my questions here, they sent me too. The topic was 700 pages chtoli. Honestly, I was offended then. Moreover, I read the last 20 pages.
Now, at least Miranda has described a lot in a very concentrated manner, you can send it there.
But to send it like that only provokes reciprocal trolling and aggression.

[Twig]

Twig, Twig, the rescue of drowning people is the work of the drowning people themselves; the machine is not cheap - you buy it not for a year, it is better to figure it out in advance than to think with new brains, it's also thanks that you can ask questions and read the branches here.

[kartinka]

kartinka, yes, it's good that there is a storehouse of information. And thanks to Miranda for organizing! Well this is a whole dissertation! To delve so deeply into the topic, into all sorts of nuances. Thesis, no less

But you need to be more lenient towards newcomers. I got on the bread maker when I was looking for reviews about the coffee machine. I read it, then climbed on other topics. Then I looked for bread recipes. But I could not figure it out for a very long time in the forum.
So don't send too far newbies

[Twig]

Twig, agree! Sometimes it's even scary to ask about something

[Twig]

Twig, Expensive! Me and Minranda we will not send anyone Thanks Miranda huge for the work that she has already done and is now doing!
ASK! I will answer for the thousandth time (not annoying and stressful at all)
kartinka, I wrote about working through an adapter .. that's why I sell a set of attachments and I want to try to buy exactly the KAH series in order to be more objective!
But I also have 020, but I also have a whole set (even a spare) of attachments for it! While I do everything on it

[Olga VB]

Olga VB, But not all! Given my needs, induction may sometimes be pleasant, but it is completely unnecessary. If you bake something different once a month, then you can do that, even for pleasure. And I bake even less often. And I also absolutely do not like a stainless steel bowl for cooking (heating, boiling).
Well, and the size did not suit me in any way.

It is a little smaller than a stationary one, and it also needs to be stored somewhere, like the rest of the attachments.

This is if you compare it with a manual one, and a decent electric 2.5 - 3 times more - the motor is the same.
I do not argue, just to each his own.
gray, do not be offended, but simply analyze what you need from the CM, why, what power (here I am for more, I cannot be convinced), what is the size of the bowl and the size of the machine, taking into account tilting up, taking into account how the attachments will be located , what nozzles are needed in the future or immediately.And then look for the best option in terms of configuration and price.
Sometimes in stores it happens that the price is not the lowest, but they give decent bonuses, for which you can partially pay for the attachments. Sometimes it happens that you buy three nozzles, the fourth is a gift (this is from the experience of buying in the summer at MVideo).
And then, buy a KM with a couple of nozzles, but then for several years there will be no torment: what to give. Another nozzle!

The point is not that every 10-20 pages they ask the same question, and someone gets tired of answering the same question 100500 times. And not even that the branch would be half the size, which means it would be half easier to read if every 30 pages they did not chew the same thing.

Personally, I primarily react to the syllable. And, unfortunately, the tone of the discourse does not always encourage me to spend my time on a detailed answer. But this does not prevent other people, with a different sense of the written word, to answer if there is such a desire.

Thanks to all participants, there is a lot of necessary and important information in this topic, which helped me make the choice 🌷🌷🌷
A gourmet is coming to me. I'm worried about the meeting. Pack delivery, plus the weather ... cold and in general ... How to check it upon receipt. Does she need to stand for a while after the cold? What should you pay attention to? I here somewhere near the advice "to boil the water" read, was it a joke to the participant or is it really a necessary procedure. In general, how to check its quality.
(PS In the course of communicating with the store, a question arose, they attribute this product to technically complex, I decided to clarify this point for myself, and somehow I did not find in the Government Decree No. 924 that CM refers to such goods, maybe someone here delved into such nuances, share your opinion. What clause applies to KM?)
If something like this has already been asked and answered, orientate it in the topic or reference share.
Thanks 🌷

It's no joke about boiling.
If the car is new, with seals on the box, you don't need to check the package contents. All the same, you will not take into account everything. And after the cold, of course, you need to warm up.
We are all different buyers, you have the right, of course, to disassemble everything and check with the courier. I haven't opened it in front of the courier.

It's not that every 10-20 pages they ask the same question,

Maybe, of course, a stupid proposal, BUT it can make subtleties under the most popular CM and there everyone says what suits in this car and what does not.
Or one "KM Choice" (although I think a dump will form there).

I haven't opened it in front of the courier.

Thank you. I am more worried about delivery, so that during transportation they do not drop, damage, etc.

Maybe, of course, a stupid proposal, BUT it can make subtleties under the most popular CM and there everyone says what suits in this car and what does not.
Or one "KM Choice" (although I think a dump will form there).

Not stupid, because when there was a choice at the stage, I was freaked out by the amount of motley information. And I have a baby and free time badly correlates with the desire to read and delve thoroughly. Although both the reference book and a separate topic about baits helped me a lot, THANKS THAT THEY ARE Miranda and Rina🌷🌷🌷 The choice and use are somewhat different topics, so it would be great to "fly separately, cutlets separately."

[shichisho]

shichisho, if dropped, it will be visible on the box. Although there is such a box that you will drop FIG.

[shichisho]

shichisho, if dropped, it will be visible on the box. Although there is such a box that you will drop FIG.

Your few lines somehow reassured me at once 😁 Thank you 🌷

[Vlad_Ru]

Vlad_Ru, it seems to me that it would be logical to make the topic by induction. There are already two versions of the models, they have differences, there are more questions.

But for this, it seems to me, the following circumstances are needed:
a) someone will collect all the information already available to make an FAQ;
and / or
c) there will be a person who will write the first 10 + - posts, with detailed information, with all the links, frequently asked questions, etc.For the first page to be sufficient, so that at least the first 50 pages set the format and level of discussion, and not immediately start a dump, which is inevitable in any format.

I thought that I would finish the Handbook for NG, but various circumstances, unfortunately, leave little time, the work slowed down. And so I planned to finish the Handbook and open the topic on induction models.

Girls, hello! I am again to you for advice! My combine chief elite xl arrived))))) I seem to have figured out everything except one. When working, the upper part, as it were, lies loosely on the lower one (I will not say that it jumps a lot, but if you put your hand on top, then lower it by a couple of mm) Should this be so or is it some kind of problem? I asked my husband to see if it is regulated where, he did not find anything. Because of this, the harvester, for example, does not want to whip up 180 g of butter - it smears it on the bottom and sides of the Nozzles, it got a little better, but this backlash still remains and it scares me a little ... if this is written somewhere, tell me please where to look

That is how it should be

Yes, it should.
This is a backlash for head movement. If it was tight, it would break.

does not want to whip up 180 g of butter - smears it on the bottom and sides of the Nozzles twisted, it became a little better, but this backlash still remained

We still need to tweak it.
Except for the hook (it is not recommended to twist it), all attachments should almost touch the bottom. Then the butter will churn.

And what do you beat? Flexy? Whisk?

[Miranda]

it seems to me that it would be logical to make the topic by induction. There are already two versions of the models, they have differences, there are more questions.

Miranda, dear, what is this topic about? Solid induction, all about them and for a long time, from the second part. The rest of the CM, even the latest models, are rarely discussed. Although, maybe, in the event of a divorce, the owners of the other CMs will be more active, I don't know, just my opinion

Because of this, the combine, for example, does not want to whip up 180 g of butter.

marina__, I'll put in my own five kopecks ... Everything is fine with the car, I like how the new ones work, their movements are smooth, swinging. Yes, the tips should almost touch the bottom. And yet, 180 g of butter for a whisk is not enough, try flexi (rubberized like that), and, importantly, the oil should be at room temperature. I recently whipped it with a whisk, though 450 g, how did he beat it remarkably and quickly, somewhere half a bowl was white butter. I wish you success!

Can Flexi be whipped butter too ??? Is the norm whipping up? In lush white?)) For some reason I only use a whisk for this, although it smears on the walls ..

[firuza83]

firuza83, yes, all the time after acquiring flexi (though I have an old model) I just beat it with it, the result pleased me.

Thank you all very much, I probably really twisted the nozzles a little ...: rose: I'm just comparing it with the previous one, there it was really possible to whip one protein, but there the bowl was smaller too .. so we need to adapt a little more) about flexi - thanks for the idea , would not even have thought of doing it. I will get used to it further)

3 eggs. 1st grade. A little boiling water poured in .. heated 40 degrees.
The biscuit is about to bake. Slim, yeah. On a roll. Now I think where I will smear.




This is for those who don't know if induction is needed

Hello girls! I registered with you a long time ago, sometimes I read topics. There is no time to write - small children + work. But now, apparently, the moment has come. Tomorrow 9060 will come to me. I live in a deep province, problems with shops and delivery. But sometimes I get out to the region. center. A specific question - in M. Video there are attachments for Kenwood, but there are some incomprehensible articles for me. Poke your nose, please, how to translate their SKUs into the SKUs of the official Kenwood stores. Thank you.
Well, for example, an AW20010006 Kenwood sieve.

[LydiaVera]

e.g. sieve AW20010006 Kenwood.

LydiaVera, this particular nozzle for bowls of 4.6 liters, but in the topic it was repeatedly discussed that large bowls are also suitable and some forum users use it.

to quote Miranda from the Attachment Handbook
"AT (KAV) 922 can be installed on a 6.7 liter bowl, it will work, but still there is an opinion that a thinner pin is not useful for a socket."
again from the reference book
"AT922 (old name) and KAB922 (new name)"

Well, for example, an AW20010006 Kenwood sieve.

Specifically with a sieve - AW20010006 for a small bowl, AW20010007 for a large one.

Mvideo shows off, calling the attachments service numbers, not sales ones. But in most cases they began to write the normal name in brackets in the title. And you can also go to their nozzle, select the Specifications tab - 99% of the instructions are laid out, and it has the correct name.

There is a separate topic for nozzles
Kenwood kitchen machine: working with attachments

Good luck

[Miranda]

select the Specifications tab - 99% of the instructions are laid out, and the correct name is in it.

Miranda, specifically on the sieve there is a general instruction for both models
This, apparently, to make it easier and more interesting for buyers.

[Tan_ch]

Tan_ch, so I answered about the sieve

Girls, thanks for the answers! I will look for my home, the car was not easy for me, I will not tempt fate. I always dreamed of Kitchen, and then induction mixed all the cards for me. Taki chose Kenwood. I'm waiting for tomorrow in some kind of panic.

[LydiaVera]

LydiaVera, don't panic, everything will be just fine!
Congratulations on your assistant!

Thank you! An assistant is needed. The joints are not the same. I want a powerful kneader for a long time. And then there is a large bowl for proteins, and you can temper chocolate, an ice cream maker, and a sieve. And all in one. I'm afraid to jinx it. True, from add. I ordered only a dough sheeter. I can't find some, but I can do without others. Expensive. Now I have climbed into the Directory, I will study, I have not figured out everything myself.

[LydiaVera]

LydiaVera, everything will be fine, do not worry!
I understand you very much, when they drove me, I also jumped

Take your time with the attachments. Now is not the harvesting season, the sieve and so on can wait. And you already have a blender and a food processor. Master the car, solutions will come.

Many wanted all the attachments before buying a car, and then revised their desires. I also wanted everything, and then I realized that half was not needed.

Tomorrow 9060 will come to me.

Can you find out in which store you took KM? And about delivery, please unsubscribe how you arrived, is everything in order ...

[shichisho]

shichisho, officially 9060 is sold only in the office. store.
Delivery to any corner of the country is free.

🔗

[shichisho]

shichisho, officially 9060 is sold only in the office. store.
Delivery to any corner of the country is free.

I ask about the store, because while the pack website is on, it is on my parcel that there is a debt for delivery of several hundred rubles, without which the delivery of the cargo is impossible. Well, free delivery by courier to any part of the country, in my case, while it looks like self-pickup from the distribution point of PEC parcels on the other side of my city ... I had slightly different fantasies when placing an order were about free courier delivery, somehow I counted receive a free 30-kilogram parcel on the doorstep of your apartment. Apparently you will have to spend time and clarify in the office. store (((

[shichisho]

shichisho, you are in the office. you ordered a store, and you have a pickup with a payment of several hundred rubles?

For the first time in a year and a half that I see here reviews about free shipping from the office. I read this review. Everyone was brought home for free. You have to call the store, of course!

I remember a few reviews when the couriers tried to leave at the entrance, without lifting, but self-pickup was the first time.

[shichisho]

shichisho. Yes, girls. I'm worried about the delivery too. At first, the transport workers told me that the city in which I live does not exist in the world. Well, they don’t know him, so it’s not. I was not offended - the wilderness, it is also the wilderness in Africa. I bought on the above site. There they gave me the order number and some other number. With their help, I tracked the order. Then she began to call the transport workers to agree on the exact time of delivery, but did not find understanding. "You will be called an hour before."I work in such a place that very often it is impossible to leave everything and run through half the city. They can bring you straight to work, but this is also not an option - to arrange a circus with an acceptance and where is the whole pile then? I was counting on a more civilized delivery. The city, where my order has been for several days, is 30 minutes away. There is an issue point. And they come to us when they can. I will hope for the mercy of fate and the boss. Fortunately, he is a good man. I will of course write how it went. But you can also in the office. store call, of course. I have already punched them, the poor, all over their heads, sometimes with delivery, sometimes with attachments.
Miranda, Yes, this is correct. Among other things, you also need to have a conscience. It's already a shame in front of the family A very expensive toy. I want a sieve not only for blanks, I want to try to rub the Kurds in it. Although, you can and in the old fashioned way.



I've been stupid, I didn't see the mixing attachment right there, you call it a souffle. It's a shame, however. And I need a second cup, I consider it a necessity. Not induction, of course. I'll find the money, I'll try to buy it. And the rest will wait.

[shichisho]

shichisho,

For the first time in a year and a half that I have seen reviews here about free delivery from the office. I read this review. Everyone was brought home for free. You have to call the store, of course!

And this is the first time I have encountered such "miracles". Your smile fully reflects my emotional state)) I'll make a reservation that the situation looks like this YET, but how it will unfold in the end ... I'll write so as not to introduce confusion, since there were definitely no messages on the forum about such curiosities with delivery from this seller.

Girls, good luck to you! Dont be upset!
Be sure to call the store, I think they will not be happy there either with the image that the transport company is making for them.

And a little earlier I wrote three addresses of. shops. There are slightly different prices for nozzles. What surprised me, but apparently different goals and objectives of the stores.

Many more order from abroad, in a computer universe, it is better to unite. You can also ask someone from Moscow or St. Petersburg to redeem and send some kind of attachment by mail, so that it is cheaper than store delivery.

At the flea market, we often have unnecessary and even new nozzles, on Avito they will pick up nozzles for the action and sell them cheaper. That is, a lot of options. The main thing is to look around, master the car, understand what is needed, that you can wait and look out for the action. Etc.

I received a letter from Kenwood with a discount code, 10%, valid until the end of the year.
Only on the site, if someone needs something, I can order something from the range of the site, or I will send the code.

[Tan_ch]

Tan_ch, they have a 15% discount on any - nozzles, cars, etc.
Free delivery within Moscow time and St. Petersburg from a certain amount.

🔗

Now I checked it before giving the link, threw the most expensive car into the basket and an interesting thing opened up - a recipe book was added as a gift on its own, and, they say, two promotions are not allowed. And I removed the book - immediately -15% I made screenshots.

[Miranda]

Miranda, here are the bad people, at their request I passed the survey, and they presented it to me as an exclusive discount ... and promised an unlimited discount over the phone, but sent it before the end of the year.

[Tan_ch]

Tan_chcrossover marketing

And about 15% on the main page information! Previously in changing pictures, and now below, but on the main page. Who is attentive - that fellow