Kenwood kitchen machines

[Miranda]

Miranda, yes, submersible suvid. Masha's got up gorgeous in the bowl, the lid covers her own.
I still use a taperver basin, but just recently I thought of correcting my own lid for suvid, now it's irrelevant.

What is the promo code for the second bowl?

At 5 o'clock, in the afternoon, the bowls were still there, they wrote in limited quantities. And the gifts at the time when I bought in installments, a month ago, the 906 had others, the 904 did not have it at all, a set of AT 830 rolls, and the adapter, then made equivalent, divided the cost of the gift in half.

At 5 o'clock, in the afternoon, the bowls were still there, they wrote in limited quantities. And the gifts at the time when I bought in installments, a month ago, the 906 had others, the 904 did not have it at all, a set of AT 830 rolls, and the adapter, then made equivalent, divided the cost of the gift in half.

Thank you.

[lenamild]

lenamild, I will do it on Saturday and will tell you everything in detail !!

Is it with a submersible suvid probe (or what to call it?)?

And why with a submerged suvid. If the gadget keeps the exact temperature, set 65, 68, 70, well, how much you need, and cook for yourself. If 8 hours is not enough, start a second cycle. And it may even be possible to fasten the bag with a clothespin on the edge of the bowl even without a vacuum cleaner, as shown in the Joule program. Or perhaps the lid will hold it.
By the way, the second bowl is not needed for this either. The machine will not be used 24 hours a day. I usually put the ham overnight. But I often make according to Joule recipes, and there they cook for 12 and 24 hours.

[VRad]

VRad, the girls wrote that Kesha is not suitable for suvid. Does not keep the temperature clearly enough.
I don't remember the details, but they didn't recommend it.
This is where the souvid is prepared
🔗

On the other hand, if I am satisfied with the result of the work of the suvid in the normal mode without any constructions, I will be immensely happy.

Ladies, damn it, what are you doing? Now I sit and argue: maybe take 096 or a new one, and sell the senses ... I will just pay off the difference in price ...



Do not hit with slippers, please, but where to read, which sensation nozzles are suitable? Can the noodle slicer, cubes and spaghetti maker be used? Eh, in vain I didn't go into the topic for several days ...

[Nathalte]

Nathalte, if there are nozzles for the sensor, definitely new, since there is a hexagon.
On the low-speed nest - meat grinder, noodle cutters, low-speed vegetable cutter, grating for berries, flour mill, cube cutter

Because of this, I did not buy 096, so as not to change the attachments to the old socket



I have another sadness - yesterday we talked to the manager that I don’t know whether to take 9040 or 9060. I still decided on 9040, called before shipment, as agreed ... AND ... GIFT multi-chopper instead of a bowl.
It turns out that I should have arranged it exactly yesterday so that there was a bowl. In general, these are their logistical and internal corporate features, which I was not warned about. That is, I believe that this is the company's cant, which they must solve.

In general, I will probably wait for a more interesting proposal, now somehow it does not work.
The principal consent was received from my husband, the financial issue was resolved, and the situation with the gift was very upsetting (((((I don't need a multi-shredder, especially when I’ve already tuned in to the cup I need ...

Who is interested in the multi-shredder attachment
AT320, on the kenshop website. ru, pre-order is written and the price is 3190r, during registration it turned out that the nozzle is in stock, they will bring it on Monday.
A 7% discount was issued without a card, I just indicated in the comments that they bought a 096 car.

I have another sadness - yesterday we talked to the manager that I don't know whether to take 9040 or 9060.All the same, I decided on 9040, called before shipment, as agreed ... AND ... GIFT multi-chopper instead of a bowl.
It turns out that I had to arrange exactly yesterday so that there was a bowl.

I made an order YESTERDAY and I was also told that the cups for the promo code were out. Now only a multi-shredder is a gift.

[toma063]

toma063, was there a bowl in the order?



I have a question for those in the know:

Sensu has an ice cream maker, it's a pity to sell for a penny. Is it possible to use the ice cream maker itself for induction?
Buy a plastic bowl on Ebay
🔗

And the second question - is this bowl suitable for gourmet?

[anna_k]

anna_k, all bowls 6.7 l. interchangeable.
They have the same geometry.

With new machines, only the next innovation - because of the new lid with pins (for the recesses in the new bowl), the new lid will not fit on other bowls. Without a lid, all other bowls can be used.

[Miranda]

Another gourmet question - is there an adapter for AT attachments in the kit?



Miranda, as I understand it, the lid is needed only for cooking? And you can't cook in plastic ...



I just think taking a plastic bowl and not changing the ice cream maker would be cool. And the price tag is more than affordable

toma063, was there a bowl in the order?

When I made an order using the promo code, a bowl came out. And when the manager called back to clarify the order, they informed that there were no bowls.

[anna_k]

anna_k, you should probably make an ice cream maker in the Handbook
Some crazy days.

The internet says that the ice cream maker in both variants has a code - KW629325.

It seems to me that you are thinking in the right direction - only replace the plastic bowl.

[Miranda]

Miranda, Thank you!!!
I ordered a plastic bowl until our girls bought everything))))

Then it makes no sense to cancel the order because of the replaced gift. It's a pity that there are already cups, you will have to attach

You can take the scales ...

[Sto]

Sto, I already have 7 different ones ... much more?

The scales, as I understood it, are simple, the only thing is that the native rug fits comfortably on them

Another gourmet question - is there an adapter for AT attachments in the kit?

Hello, no, it doesn't go, it was given as a gift to the 906 model, with noodles.

[lenamild]

lenamild, thanks then I will leave mine from sense.

Yesterday we brought 9040 together with the donated bowl (I had time! Thanks to the girls for the promotional code, I called after I made an order and they added it to me). I was stunned by the size of the box. I didn't expect it. The courier said that everything together weighs 30 kg.
Everything was sealed. I checked, following the instructions, the presence of attachments and the body. I turned on the rotation and that's it. I did not check the induction. So everything is on a specially placed table. Next to the box, in which all the add-ons have been returned so far, looks tiny. Heavy terrible. I tried to move, so the table went with him). Hopefully this afternoon, do some preliminary learning with instructions in hand.
This is my first harvester. And given the fact that I wanted this induction for more than a year, I can say that I feel, first of all, a feeling not of joy, but of overwhelm, because an unrealizable dream has come true

[VRad]

VRad, Valeria, congratulations from the bottom of my heart! This is a helper so helper! May he serve you faithfully and faithfully!

Girls! Forgive me, but I decided to buy 096 or 9060. Now I'm suffering which one to take

Girls! Forgive me, but I decided to buy 096 or 9060. Now I'm suffering which one to take

If finances pozolayut, then 9060 .. I have 096- happy, but if finances allowed, I would take a gourmet

If finances pozolayut, then 9060 .. I have 096- happy, but if finances allowed, I would take a gourmet

Fuh! I ordered 9060s, according to the code as a gift a multi-shredder. Has issued an installment plan, already approved. And it began with the choice of Multivan for 20tr

Congratulations! 🌹🌹🌹



Girls, I make marshmallows according to the recipe from the link (in the subject of recipes) .. it is worth putting 140 degrees and 20 minutes. It took 18 minutes and 103 degrees .. logically - the water boiled .. why 140? Is there something wrong with the car?

[zvezda]

zvezda, congratulations on a smart purchase !!! May it serve long, long and bring a lot of joy!

VRad, congratulations on such a good purchase! Let it serve for a long time and only please! And what cup did you give as a gift? Like a gourmet with grooves or smooth edges like 094/96?

And what cup did you give as a gift?

Thank you for your congratulations. I didn't even open the cup, but logically it should be with recesses. Just now I thought that because of the recesses, if I decide to sell soon, it will not work. But, most likely, I will leave it, it will probably come in handy.

Now I looked at the Dutch prices again. Now on the nozzles. Everything is like ours and more expensive. You can't save money with this Barbie doll

[VRad]

I didn't even open the cup, but logically it should be with recesses.

VRad, unfortunately, the logic in this case does not always work (((

You were absolutely right 😀😀😀. The bowl is old, without grooves



Girls, help me figure it out. What do the designations AWAT and KAN mean. I was offered a food processor AWAT647001 from 096, but maybe it is designed for a medium-speed socket, which is not in gourmet? The store sells KAN 647, as a cooking chef suitable for all models, but they also write in the description about the medium-speed socket (:. And for the processor that comes with the 9060, the article is not indicated.
I honestly climbed the signs in the topic "Working with attachments", but there are no such letter designations. And I tried to search, found references, but did not figure it out. Help one loaf

In older models, the processor ran on a medium speed socket. The new models do not have a medium-speed slot, and the processor runs at a high-speed one. Accordingly, these models differ in the landing nest. Here there is a comparison.
In particular, KAN 647 operates on a high-speed socket.
I can't say for sure about the AWAT647001 marking, I haven't come across this one, but something tells me that this is a model for a medium-speed socket.
At least, similar markings (AWAT), only with different numbers, were encountered even when there were no KAN nozzles in nature.
Therefore, by analogy with a high degree of probability, I can assume that this is one of the AT647 designations, i.e. processor for a medium-speed socket.
This is not suitable for KM of the Gourmet series, because there is no medium speed slot in this series.
Good luck!

KAN 647 operates on a high-speed socket

I cannot give a link, but the description of the KAN on the puppet's website says literally the following:

With a medium speed drive and a shatterproof housing, it will come in handy in any kitchen.

So I'm at a loss
PySy. And yet she tends to trust Miranda more.

[A]

AWAT - extended marking, they have moved away from it, but it may occur on boxes. Shortened to AT - highlighted in black.

647001 - 001 is also an old postscript.

Ie. AWAT647001 = AT647

But the Mvideo store loves these old AWATs, it's not clear why.

[VRad]

VRad, there on the website to the scales it is indicated that an adapter is needed
🔗

Don't trust them, trust us

Don't trust them, trust us

I came to the same conclusion 😊. See edit Post above

[VRad]

VRad, congratulations on your new car

Do not be afraid of her, soon everything will become familiar and easy.
When I started reading the topic, I did not understand how people communicate in cipher - AT647 blah blah ... I did not understand what they were talking about at all.

Good luck!

[Girls!]

Girls!! Congratulations to ALL on your new purchase and good helper!: Rose:
I compare both cars .... and in general, while in confusion: girl-th: 096 has its advantages !! When I double-check again, I will be able to accurately formulate my arguments !!
Here RAGU was prepared at the same time at 096 and 9060, and so 9060 offered to cook for 3 hours !!! And I liked the taste more from 096 (I can't explain ... but the meat was softer) and it turned out faster, although the bowl first "slid" in it.

Good day! I ask for help in choosing, I myself have already completely confused. I needed a meat grinder and a blender. I went to take a closer look. The mvideo showed a Kenwood sense with 4 attachments to choose from for 40 thousand. There was no meat grinder and blender available, I left them a phone number, I climbed into the forum myself, re-read many new words. Today I went to look again, I liked the titanium of the same size more. Its price is already 50 thousand, but the kneaders are already made of strong stainless steel and there are more of them, one nozzle (a meat grinder or a blender or something else as a gift. Power is already 1500 against 1100, but the bowls are the same, 4.6 liters. They also give 7000 m 7000 rubles + my 7000 cash and for 14 thousand I can buy) After the forum, there is a mess in my head, which is probably expensive. Now I’m thinking about induction. Reportedly I saw that you can take a little more. The question is, what do I want? , so as not to cry later ... or take a sense, let there be more nozzles. Although today I liked the titanium more. ... Maybe you can buy it cheaper? I really ask for help, otherwise I am completely at a loss. ”I live in Kaliningrad, the choice is small, there is no induction in mvideo. Don't see it live - touch it. ...

[kartinka]

kartinka, if financial opportunities allow, take induction, but you have to think about a new or old one. If the budget is not that big or follow the words lives with you, take a sensor with attachments for the action (my personal opinion). I took it 2 weeks ago and am happy, because I have never had such a cool assistant in the kitchen. And I am also immensely happy that when I bought my sense, there was no old induction for sale on the official website, but only new ones, because then the torment of choice and the war with the Jewish toad would have been long and bloody.

[kartinka]

kartinka, as it is customary to advise here - take the most expensive machine, and you will overgrow with nozzles
Sens used for two years, was happy. Now there is an opportunity to change to induction with minimal losses - I change. But for me, the acquired fleet of nozzles was critical, which I managed to keep completely.

If you buy a car from scratch and there is an opportunity to take induction, then it is worth considering, especially since there is an opportunity to issue an installment plan.
P.s. Kenwood blender is more suitable for athletes - very heavy))) in the sense that pumped arms are guaranteed when used))))

I ordered 9040 ... But Tinkoff is to blame, he approved the installment plan.
I will read the whole topic about nozzles, but for now I am very interested in the question - is a multi-chopper suitable for solid products such as spices?
I already found the answer.))

Another question arose. Do I understand correctly that the pins of the planetary socket attachments, starting with A and K, differ in thickness. T e A 8 mm, and K 12.
The manual in the description of the sieve attachment says

AT (KAV) 922 can be installed on a 6.7 liter bowl, it will work, but still there is an opinion that a thinner pin is not useful for a socket.

It seems that the AT and KAV nozzles are absolutely identical and both have a thin pin

A little higher

They feature mounting cups / inserts and paddle attachment pins.

But in the description of this nozzle, only AT and KAV are given

although the bowl first "slid" in it.

And what do you mean moved out?

Do I understand correctly that the pins of the planetary socket attachments, starting with A and K, differ in thickness.

No, not right.
Not A and K have different pins, but different numbers - 922 and 930.

Because

For 6.7L bowls - AT930 (old name) and KAB930 (new name)
For 4.6L bowls - AT922 (old name) and KAB922 (new name)

I don’t know how much easier it could be to write this.

Sorry, I do not understand the wording of your questions, and what you want to know.

Sorry, I do not understand the wording of your questions, and what you want to know.

I want to know how the later thick pin models are labeled
I got the impression that in the case of the sieve, the numbers indicate the size of the bowl for which it is intended.

Quote:
AT (KAV) 930 is not suitable for 4.6L bowls.
AT (KAV) 922 can be installed on a 6.7l bowl

All planetary bowl attachments have 6.7 liters. thick pins.
All planetary bowl attachments have 4.6L. the pins are thinner.

All planetary bowl attachments have 6.7 liters. thick pins.
All planetary bowl attachments have 4.6L. the pins are thinner.

Miranda, thank you very much for your patience and comprehensive answers. I press the "thank" button all the time, but, probably, beginners cannot do this either (:
P. S. Understood. This my tablet allows me to thank only in a new tab. Now I will thank you according to the rules.

All planetary bowl attachments have 6.7 liters. thick pins.
All planetary bowl attachments have 4.6L. the pins are thinner.

Moreover, there is a difference not only in the thickness of the pin, but also in the height of the nozzle.
Those. we may well, albeit with a backlash, put a thinner pin in a wider socket, but such a nozzle will not reach the bottom of the bowl and there will be little sense from it.
This trick is more or less effective only for a wiping sieve, and even then only on condition that it is impossible to get a "native" wipe.
By the way, the plastic rim, which comes with a thin pin for the bowl 4.6, is slightly less in height, i.e. there is more free space underneath the large bowl than under the iron rim wiper. This can be useful when wiping / sieving a large volume, i.e. less often you will need to empty the bowl. But this is a rare case.
At the same time, at least a little, but when wiping, sometimes the discs inside the insert rotate and scratch this rim. Those. some amount of shavings is present. Metal or plastic - choose yourself
Good luck!

And what do you mean moved out?

Turned and rolled out of the grooves! But this is only with an iron nozzle with a stirrer, and even then ... at first. I cooked a full bowl of plums - everything is fine !!
That's who has some problems ... I'm thinking which one to leave and sell 096 how ??

Turned and rolled out of the grooves!

How did you manage to do this?
I have never had the cup slid out of the grooves! On the contrary, with a steep dough, the bowl enters the grooves more strongly, then it must be removed with effort.

I'm thinking what to leave and sell 096 how ??

This is the torment of choice!

I would have driven them both for at least another week and looked.
I would check the new one on the usual processes.