Kenwood Kitchen Machines

[Maksimka]

Maksimka, KCC9060S and 096 do not differ in configuration.
In both variants + blender and food processor.
Without them, that is, in the basic configuration, there are KCC9040S and 094 models.

Nozzles for pasta (dough sheeter + 2 noodle cutters) are given as a gift as a marketing ploy to promote a new machine. Until September they started selling a new car, but sold at the office. website 094 and 096, 096 also had some gifts all the time.

At the office. On the website, you can also write the code in the order - kenwood - and there will be one more gift - scales.

Above, I gave a link to the instructions for the new induction machine, these 24 programs are described there. They refer to cooking at a temperature. But there are very few owners of new induction on the forum so far, I'm not sure that there will be 5 people. Therefore, answers about the features may not yet be available.

Sense for 40 thousand or a new induction (albeit with gifts) for 74 thousand - the difference is great, in my opinion. And in terms of finance and how and how much you plan to use the car. Although, this is also ambiguous, since personally, for example, I began to cook more, and how I planned to use it, with a real purchase, it expanded significantly.

But if 096 is 13.5 thousand more - I would have thought about that again.

[Nathalte]

Nathalte, I think so. I always start small and buy at the maximum, but half of the technology's capabilities are not used. So it was with the fancy microwave, so it was with the Bosch induction panel with temperature sensors, a bunch of programs, and so on.

[Maksimka]

And if it is stationary, then it does not matter how much it weighs.

I cannot agree. In the process of operation, you still have to constantly move the machine - both during use and wipe the tabletop. Still, induction is more cumbersome compared to a neat sensor. And the point here is not only in the space occupied, compact equipment is more convenient, whatever one may say.




Maksimka, best the enemy of the good.

[Miranda]

Miranda, for only 13.5 thousand more is naked Kenwood KM 096 53 thousand, basic configuration.
I just want to understand how much induction is NECESSARY? Layering yeast dough? It is possible in HP or in an electric oven with a controlled temperature. What else does induction give? There is little information in the description of the model. What have I missed? But the differences 9060 are obvious due to 24 programs. Someone will need this, especially if there is no other technique.

[Maksimka]

Maksimka, about the ice cream maker, look in the topic about the nozzles, there were many complaints about it, maybe it would be better to take a separate freezer if the goal is exclusively ice cream, and not an additional bowl for the car.

naked Kenwood KM 096 53 thousand, basic configuration.

096 can't be naked!
Her box is designed for attachments. Is there a half-empty box there?

Then it is either 094 model, or incorrect description on the site.

Although no, I went to the site, in the pictures and in the description there is both a blender and a processor

🔗

What makes you think that there is a naked car with the basic equipment?

***
If the physical parameters do not bother you, then 13.5 thousand can be considered as follows.

Sense comes in a complete set - K-shaped, rim, hook.
And you get 4 nozzles.

096 comes in a complete set - k-shaped, rim, hook (the best in Kenwoods), flexi. Plus a blender and food processor. Well, there are also induction nozzles - a steamer and a stirrer.

Let's say you choose a blender and a food processor for Sense. Then Sense goes + 2 nozzles relative to 096. A 096 with flexi + induction (and its nozzles). Well, the size of the bowls.

Whether it's worth 13.5 thousand is up to you.

I cannot agree.

And I cannot agree.
Since I do not lift the car, but move it when the mill needs to be connected. Moreover, I move it with one hand.And for girls, the car is on a plastic rug, and according to them, it moves even easier.

But in another apartment, she stood in such a way that there was no need to move. Once a month with the gene. cleaning wipe under it.

And the point here is not only in the space occupied, compact equipment is more convenient, whatever one may say.

Depends on cuisine, habits, preferences, technology.

A hand blender is convenient for me to stand on a stand, no matter how much space it takes, and not lie in a drawer. But I chose the multicooker more compact, and I categorically do not like round multicooker, because it is inconvenient to lean towards the display / buttons. Let it be longer, but not only round.

And for girls, the car is on a plastic rug, and according to them, it moves even easier.

Moves very easily and naturally.
Much easier than without a rug.

Having had a chef titanium 010 for more than a year. I can say the following: a bowl of 4.6 is not enough. An induction would be desirable for the following things: custard and choux pastry. There is a processor from the nozzles, and a high-speed latter is needed for workpieces. If it is possible to take induction would take, let it be (sometimes needed). But I will not borrow a car to cook something in it (soup or potatoes). And so any Kesha is beautiful. I like that this is one unit (mixer, meat grinder, shredder, etc.). According to the same principle, I bought a waffle iron with removable panels, so as not to produce entities (gadgets)

[Ketsal]

Ketsal, I use induction in the following processes:

- proofing the dough
- choux pastry
- custard
- meringue
- honey cake
- marshmallow
- Creme brulee
- mascarpone
- cheese from cottage cheese
- condensed milk
- for a biscuit, beat eggs at a temperature
- if you plan to have raw yolk in cream, for example, for tiramisu, then on induction
- everything where the recipe contains a water bath - sauces, chocolate, etc.

I have to think, maybe I'll remember something else, then I'll add it.

They say it is convenient to grind the berries in a bowl in a sieve, and make jam in it, but I don't have a sieve and I don't make jams. Only a couple of times I welded berries like jam - convenient, yes.

Shche girls praise semolina, but I do not eat it. If, according to the principle of a custard, then yes, it should be tender and uniform.

I only make risotto from food, and I also like the stew because it stir. That is, I practically don't use the function of cooking food, like a multicooker. On MK I liked the onion soup, but I’m not going to make it.

When I bought induction, I thought that proofing and choux pastry with cream would be my ceiling. But in the end, I use induction quite often.

All this can be done by hand, of course, but with induction it is incredibly easy. I would not make custard cakes with profiteroles so often if I did it with my hands.

But I will not borrow a car to cook something in it (soup or potatoes)

Cooked jam in the car
I don't have a large saucepan / cauldron / bowl for jam, but here the volume is suitable for me and you don't need to interfere manually and the temperature can be set.

096 comes in a complete set - k-shaped, rim, hook (the best in Kenwoods), flexi. Plus a blender and food processor. Well, there are also induction nozzles - a steamer and a stirrer.

I will also add that the k-shaped and the hook are more expensive, heavier, metal, and the sensa has silumin. For me personally, the sensation is more than enough, but if 13.5 thousand are all the difference, then I would take induction, of course))))

Well, masters persuade.😁 I read, study, but still, for some reason, in many online stores, the description for 096 does not indicate the processor and blender. It will be necessary to call and clarify. However, I do not need a blender, and it will be too high, it is not convenient to put it, but a dough sheeter is needed. In general, I will study and calculate what is more necessary. Thank you all very much, thanks to the Bread Maker I have so many necessary things in my kitchen.

[vis]

vis, still such a moment, by the way.
Somehow everyone parted, and I was left completely alone, for two weeks now, I had not been alone for a long time.

So, one is lazy to cook.
And I caught myself thinking that so much equipment is not needed, all the more expensive. And a small car will do, because it can do it. Or maybe you don't need anything at all except a knife, a grater, and a meat grinder.Unless I'm very used to induction. But if she hadn't existed initially, she would not have noticed her absence either.

And the crowd will return, and everything will come in handy right away.
But so far I have done almost nothing.

***

but still, for some reason, in many online stores in the description of 096, the processor and blender are not indicated

Because fools are on the payroll.
First generation induction two models.

096 - complete set, with blender and processor.
094 - basic.

I am inclined to believe that the stores will write the wrong description rather than the name. Since the name is an invoice, estimate, balance - strict reporting. And the description is a fantasy filling out the product card on the site.

but the dough roll is needed

Then 3 options
- take it as a nozzle to Sens
- take as a gift for a new induction (but it's expensive)
- buy

Very often, a car is bought for a promotion, and the nozzles that are recruited are then sold new. We have it at the Flea market or at Avito.

Flea market: accessories for kitchen electrical appliances

Miranda, thanks for the clarification.

[Maksimka]

Maksimka, good luck with your choice!

13.5 thousand is still not 34 thousand and 096 is a good car.
There will remain another 20.5 thousand and you can now google the same dough sheeters / noodle cutters. Even in our Flea market they are. It is not expensive to collect what you need in stock stores.

Only, of course, buy later, if you do buy 096, then after that.
In other versions - Sense or new induction - they will go to you as a gift.

Good luck!
Whatever you choose, everything will delight you

Thank you!



In the morning, more questions arose. 😁 The price for the 096 model is on average 64 thousand, in some stores 64 is crossed out and the new price is about 53 thousand. Is it worth waiting for any New Year discounts or is this the optimal price due to the release of the new model 0960?

[Maksimka]

Maksimka, two years ago 096 cost 126,500 rubles, a year ago 60,000 rubles, a month ago also 60, but with gifts, now they are not sold in the official store, but only the officials gave gifts, so I think that a miracle at an even lower price cannot be expected worth it, 096 can be sold out at all and will not be 53 thousand.

And, as a fourth option, sell a blender at the flea market, which you mentioned as unnecessary, and buy a dough roll.

Naked sens without attachments on Avito sold a couple of weeks ago for 22 thousand. New, sealed, with receipts and warranty. The advertisement hung for a couple of months. I read this price for Sens as fair. Here in a flea market for that kind of money, she was ashamed to even spread it.

096 for 53 thousand - the gift price is simple. There would be where to put, I would buy myself a second

[Twig]

Twig, Sens for 40 thousand all the same with 4 nozzles of 6-6.5 thousand. So he is "naked" and comes out about 20 thousand. And about 096 for 53 thousand, probably, and you shouldn't wait, they can easily be removed from production.

[Maksimka]

Maksimka, so 096 is also not naked, it comes with a blender and a foot processor,
And it seems to have just been taken out of production, they sell new cars with preinstalled programs.
I also read here in the subject that someone bought 096 by stickers in Your House. I don't remember the amount, but it's also very tempting. I do not know if this action is going on now.



Maksimka, I will also tell you a secret, a couple of times there have already been shares with Sens for 6 nozzles, and once there was a naked Sens, and before that, with a meat grinder and a blender.

And in general, Voros, have you seen the induction machine live? Go to a masterclass, touch it and see it at work. Nobody forces you to buy there.

[elenas]

I also read here in the subject that someone bought 096 by stickers in Your House. I don't remember the amount, but it's also very tempting. I do not know if this action is going on now.

Yes, in your house there was a 096 model for 45 thousand and 54 stickers.
But I do not know if there is now this action, what kind of stickers, and where to get them. I need to ask elenas

Thanks for your advice. To the one who wrote that in your house you can buy Kenwood 096 on stickers. After a week of collecting stickers for all people, I became the owner of this miracle 096!

No, this is not an option where to collect these stickers.

Yes, I bought it in your house, I collected stickers from all my friends, you can search on Yulia and Avito.In my opinion, they have a promotion until mid-November, you can look at their website

[Maksimka]

Maksimka, about possible discounts.
Unfortunately, you shouldn't wait for them. Since now these are the remains.
Perhaps some store will sell cheaper, a display sample or a promotion, but this will not be a separate ad, you have to catch it.

For several months we were wondering if there would be a promotion on 094/096 after the release of the new induction, as it was in other countries. And even some waited for it, postponing the purchase. But this did not happen, it was simply removed from sale.

I've been monitoring the price since 2015. When I was already hot to buy, it was spring / summer 2016. At the office. the Kenwood store in May 16 of the year became worth 76 thousand and this was considered a share after 96 thousand and even 126 thousand (when the dollar went 80 rubles for a short time there was such a price). I almost bought it for that price.

And from about the summer of 16, the price became in the office. store 55/60 thousand for 094/096. Here many bought exactly 096, because the 5 thousand difference for the blender and the processor was small.

By the fall + - we adjusted the price, deciding that the difference should be increased, and it became 55/65 thousand, i.e. 10 thousand difference for different configurations. And this price lasted a very long time, exactly until the release of the new car in September of this year. Now 094/096 in office. there is no store, there are no supplies, and there are leftovers in other stores at a price of whoever is much.

That is, the cheapest official price for 096 for the last three years is 60 thousand. Before the crisis in 14, it may have been less, I won't tell you here.

Only those who caught some kind of action like Your House for stickers, or found a display case, or on Avito bought cheaper. Therefore, the old-timers of the topic, who remember the prices, the flour of their own and others' choice, successful purchases, etc., say that 53.5 thousand for 096 is a gift.

you can search on Julia and Avito

That is, can you buy stickers for a reasonable price?
Do they sell this too?

In stores, I see people near the checkout, who asks - you don't need stickers, and they take away. I always give it away, because I don't collect any stickers anywhere.

[Miranda]

Miranda, yeah, stickers are selling. They sell all sorts of tokens and other garbage that is designed for children. Some for a chocolate bar, some for something. And here is a standing technique. Now I typed on Avito out of interest - 23 stickers are sold for 200r. But I found one ad.

[Anchic]

Anchic, I looked into your house, not available.
Disassembled. So the issue with stickers is not relevant.

[Maksimka]

Maksimka, I just tracked my Ken on YAM. I missed the first one at a good price from Media M, but I just stupidly looked at the second one every day on Yandex Market. Yes, there was a fear that I would buy in some "left" store, but everything is fine.

[Maksimka]

Maksimka, in the online store elextrowix 096 - 52,580 rubles, even a little cheaper and the same delivery at 400 rubles + 30 rubles / km from the Moscow Ring Road.

I already monitored the prices on Yandex yesterday. I just wondered if induction was needed, but now I decided.

[Maksimka]

Maksimka, iiiiii? Is induction needed or not?

Anchic, I looked into your house, not available.

Probably, we should not look at Your House on the website, but in the technopark, because this is a joint action, and it is better to call. Available in the Technopark.
Stickers are collected elementary - in the evening to hang out at the cash registers, many refuse them. I have stickers, but I probably want a new induction, soon others hope to be lucky

[Prank]

Prank, and the stickers are technopark or your home?
Didn't find the page about the promotion.

There is no page on the site like.
I don't know how to make the pictures bigger. In general, there until November 15, 2017

h ttp: //s019./i625/1710/0b/7dc70b5fd99ct.jpg remove the space between h and t

[Prank]

Prank, where did you find it?
I would like to consider what else they have interesting for the action besides what can be seen in this photo, or is this an exhaustive list?

Olya, what exactly did you find? Added a link, drive it into the browser and there will be a megapicture))

So I found

🔗
this is a screenshot of the booklet, I do not put a photo to open, enlarge and view, until November 15 it is valid

And google - chips can really be bought on the internet.
From 100-300 rubles. for 20 + - pcs. That is, to collect 54 stickers really for 1-1.5 thousand.maximum (I've seen they sell for 10 rubles for 1 sticker, but maybe for 20-30 rubles), and buy 096 for 45 thousand.

Pleer without KM096 chips for 53500r.

You can ask the sales guys in the Technopark (in Your House) for chips, they may be

I called the technopark, the girl said that they had nothing to do with the shares of Your House. There is no car on the Your House website. Yes, and go through all of Moscow in the hope of begging for stickers as it is not ice. And since here on the site there is an anxious mood about the discontinuation of the 096 model and its disappearance from sale, I will act more actively. Although the new induction does not come out more expensive, the price is simply higher because of the so-called gift-3 noodle cutters. That's what it comes out to. Only in the case of 096 noodle cutter nozzles can be bought later, so the amount will not seem so terrible. Although who bought for 126 thousand.



And yet, on the site 🔗 it is written that the 5-year warranty applies only to equipment purchased from them. And if they do not have the model I need, then be content with a 1 year warranty.
And the Kenwood online store. Is Ru official too?

[Maksimka]

Maksimka, at the office. On the site, you can issue an "iron guarantee" of 5 years for a car bought in absolutely any store.

🔗

Thank you.

Hello everybody.
Has anyone ordered from computeruniverse?
Today I paid for the order. The money was debited from the card, but the confirmation from the store did not come and the goods remained in the basket ...
Is it too early to worry or should you write to support the store?

Girls, boys, hello. I bought a Kenwood KVC 5100 G Chef Sense, I am trying to issue an "iron guarantee" for 5 years - it does not work, writes "you entered a non-existent serial number" called the hotline three times - they say we will call you back and silence. Can anyone come across this, help.

Hello everybody.
Has anyone ordered from computeruniverse?
Today I paid for the order. The money was debited from the card, but the confirmation from the store did not come and the goods remained in the basket ...
Is it too early to worry or should you write to support the store?
Do not worry. They usually swing for two days, and then send. I order something useful there periodically)

Madlab, my husband just said that, in theory, the goods should immediately leave the basket as soon as the money was written off, and he advises you to write them a letter.

And yet, on the site 🔗 it is written that the 5-year warranty applies only to equipment purchased from them. And if they do not have the model I need, then be content with a 1 year warranty.
And the Kenwood online store. Is Ru official too?

If you are going to buy induction, then the warranty card says what is on the kitchen machine with induction. heated 60 months warranty. As I understand it, you don't need to register anything

[Leonidovna]

Leonidovna, and in Ukraine there is definitely this extended warranty?

[Anchic]

AnchicYes, I tried to issue a guarantee on the Ukrainian site.

[Leonidovna]

Leonidovna, Ukrainian and Russian sites are not connected - different system, different hotlines.

I hope they will answer you specifically about the Ukrainian system.
There were troubles from the Russian one, but then we figured out what exactly they had a serial number, and everything was fine. And the hotline responds immediately.

Quote: madlab from Today at 01:26 PM
Hello everybody.
Has anyone ordered from computeruniverse?
Today I paid for the order. The money was debited from the card, but the confirmation from the store did not come and the goods remained in the basket ...
Is it too early to worry or should you write to support the store?
Do not worry. They usually swing for two days, and then send. I order something useful there periodically)
Madlab, my husband just said that, in theory, the goods should immediately leave the basket as soon as the money was written off, and he advises you to write them a letter.

Thanks for your feedback.
I wrote to the store - they are silent. How quickly do they respond to emails?