Kenwood Kitchen Machines

A little is not the topic, but I will tell you a secret, I drag the Tarington House ice cream maker from the closet in the room to the kitchen - that's where the severity is

[Natalia]

Natalia, this one is 2 times easier

[Olga]

Olga, Is Kesha heavier than my freezer ice cream?

My cache is 2 times heavier than my freezer.
I don't know anything about your cache (future) and your freezer yet

[Olga]

Olga, Is Kesha heavier than my freezer ice cream?

Natalia, look at the documents on the machines and compare the weight
and don't fool Olya's head

I looked, compared it, it is 2 kg lighter than the freezer, I will not fool ...

[Natalia]

Natalia, here's a little bit, and she, a hard worker, huch easier ... by 2 kg)))
notka_notka,

Is Kesha heavier than my freezer ice cream?

Depending on Kesha, my 12 kg is 1.5-2 times

Cooking Chef KM096 - 13.6 kg
Chef Sense KVC5030T - 8.68 kg
Tarrington House Ice Cream Make ICM140 - 9.66 kg

Listen, people! And what do you all have such heavy cars, and which one I set my sights on (kmc 57008) weighs only 7.7 kg? There Th pieces of iron regretted the report Does weight affect something? I beg pardon if the question is stupid
Oh, Pasha has already written. Well, all the same? Larger bowl - heavier machine?

Larger bowl - heavier machine?

patamushta metal on the bowl went more, which means that the machine needs to balance the greater weight during operation, as something offhand.

And plus for induction (on kenwood-bt compared with 6-liter KVL8300S) another 3 kg.
No, I put it permanently. Someone easier had to be evicted from the countertop. I would not have pulled to carry 096 Enough when I looked at the serial number at the bottom. You can still move it, but not constantly pulling more than 13 pounds Well, or I'm a weakling

[Paul I]

Paul I, so I read this information here on the site. There are those who are officially imported and sell, and there are those who did not bring it officially. I buy through an intermediary, he does not give me a receipt and information where he buys, I only know that in Italy))

so I read this information here on the site. There are those who are officially imported and sell, and there are those who did not bring it officially. I buy through an intermediary, he does not give me a receipt and information where he buys, I only know that in Italy))

Is it great cheaper through Italy?
Well, when making such purchases, you always need to clarify warranty issues.
It is international or regional. Well, the details regarding your device.

There is a person whom he has already brought to himself and a friend, who often travels there, says from Italy. How and from where actually nothing is known. There are no guarantees at all. If you turn it on and it works, we pay and that's it) So I thought about the risks)
The difference comes out somewhere in the $ 250
Kenwood 096

So I thought about the risks)
The difference comes out somewhere in the $ 250
Kenwood 096

Over 50,000? It makes sense. But if the Kenwood website contains a worldwide guarantee, there are no risks. And she, I suppose, is by the product number.

I could not stand it until 27 .. yesterday I got it, but since there is no bedside table for it yet, I put it back in the box (I felt that I could stop the horse) .. yesterday I made cheese buns from choux pastry, chopped a head of cabbage, carrots and onions, pleased ) today I made a chocolate fondant for children with whipped cream .. mmmm I already love this car) I wanted to take a picture, but did not have time

[Alena_Sergeeva]

Alena_Sergeeva, with a start!

got it yesterday

what did you get?

what did you get?

KM 096 .. came on April 17, decided to hide in the closet until my birthday .. but could not resist)
Pavel I, you wrote that you ordered from the computers .. website, can you roughly tell me how much delivery came out?
I want AT340 cube, 400 grater and sieve .. mo

Yes, I want to share the recipe for cream soup) from broccoli, who does not know what else to do with a blender.
* Throw broccoli cabbage into boiling water (we disassemble one small head of cabbage into inflorescences, or frozen), as it boils, blanch (douse with cold water).
* in a blender on impulse mode (ice pick) crumbling 100-150 grams of cheese (to taste),
* put cabbage on the cheese, pour milk or cream and turn on the blender for the maximum allowable operating time (if I'm not mistaken Kenwood allows you to use the blender for 2 minutes), speed 5-6
* pour everything into the bowl, turn on the temperature 60 'and whip at medium speed while heating up (3).
We get the most delicate cream soup, in fact, I wrote longer than I did ..
I love mashed potatoes very much, there is also soup with tomatoes and mozzarella cheese .. and many others, if someone needs it, I can share.

[Alena_Sergeeva]

how much delivery came out?
I want an AT340 cube, 400 grater and a sieve .. maybe for rolling the dough ..

Alena_Sergeeva, 29 euros will cost delivery and 5% will be additionally blocked on the account due to possible fluctuations in the exchange rate, if the card is in rubles. You can get a € 5 registration bonus and € 5 for a news subscription, but I did not activate the latter.

Delivery costs 29 euros

Shipping costs will vary based on weight.
For example, for two nozzles - a mill and a grater, they will take 29.40, and if you add another bowl, then the delivery will already be 32.43 euros.
Plus, they will withdraw a small amount depending on how you pay - by credit card or PayPal.

Pavel I, you wrote that you ordered from the computers .. website, can you roughly tell me how much delivery came out?

I ordered for Kenwood BT.

My saga with the acquisition of the induction KEN was long and thorny, but finally HE arrived!
I kneaded the bread, I try to learn to "feel" the dough in it, I retrain after the bread machine. I kneaded the minced meat on the sausage - how great, hands are free and the mass is easy to hold cold!
And now help me, please, I decided to boil a glass of water to check the operation of the induction, the water boiled, and the temperature display only shows 77 degrees, so I am at a loss how accurate the readings should be (came across in the subject that + -5)? How then to adjust the heating of, say, proteins when whipping?

Good day!
Veta, tell me, did you find out on olkh about kenwood? My head is swelling now, too: kitschen or induction cache .... I also need it as a kneader, since everything else is already there.
Thanks in advance for your reply!

[Elena]

Elena, I don't know what olkh is, but, using the fourth month 096, I dare to advise discarding doubts: Kesha, no options.

[j @ ne]

j @ ne, a glass of water is not enough. Boil at least two :)
My kettle "on the bottom" also boils at 70 degrees.
With stirring, the temperature will be more accurate, physics :))
Congratulations on your purchase!

My kettle "on the bottom" also boils at 70 degrees.
With stirring, the temperature will be more accurate, physics :))

Yes, this is the case.
The temperature is measured by sensors in the base. And the larger the volume of the heated mass, the more accurate the temperature readings. And such serious differences indicate that the cooling through the metal of the bowl with a small volume occurs faster than the heating of the sensor itself.

The Cooking Chef website has information about free master classes in St. Petersburg - on Wednesdays at 19.00,
"Specify the program of the event by phone:
8 (926) 701-80-35"

[Tatyana]

Tatyana, Thank you!!!! Let's cooperate with someone

the first two digits are the year of production of a particular model, and the last two are the week of production (there are 52 of them per year). This code is on a small piece of paper at the bottom of the car. Now you can find out in what year your typewriter was made and how long it was waiting for a meeting with you.

Hmm, I have 16S 53 on the sticker below - made on December 31st?
I watched the videos about unpacking the car, caught a glimpse of some kind of brush, in my car there was no such thing, is it really necessary?

[j @ ne]

j @ ne, Brushes are supplied with some attachments - for example, AT644. It is so conical, otherwise it is difficult to clean the mesh due to its narrowing) In other nozzles - I seem to have never seen brushes)

In long agony and hesitation, it seems to have decided)) I'm waiting for KM094. Although the feeling that it takes a long time for everything to take shape on kenwood-bt. I already have no strength to wait))

[Anna]

Annahope you won't regret giving up the blender and processor. Separately, not in the 96th configuration, it will be a little expensive.
Look at the thread, what to look for when receiving the CM.
Good luck!

[Olga VB]

Olga VB, is it worth buying 096 or 094 now? After all, there will be a new model soon?

Should I buy 096 or 094 now? After all, there will be a new model soon?

How long to wait for this "soon"?

is it worth buying 096 or 094 now? After all, there will be a new model soon?

How worth it.
Especially considering that practically nothing has changed since the 070, and the price of the previous models is significantly lower than the new ones.

and the price of previous models is significantly lower than new ones.

Are you saying that the new model will be at a space price?

How long to wait for this "soon"?

here they wrote about the new model, but I don't remember what they said about the timing. In any case, the real price decline is due to the expectation of new ones. models.

I regret that I did not have time to buy when they gave me spare buckets ...

Are you saying that the new model will be at a space price?

Well, this is unlikely. But one and a half to two times more expensive than the current one.

In any case, the real price decline is due to the expectation of new ones. models.

And it is possible that with the release of it, they will fall even more.

[about]

Of course, there are some changes in new models - we have them here already discussed... We watched pictures, videos ...
It is difficult to judge how significant these changes are, but there is nothing fundamentally new in these models.
Of all the innovations, only the "sweeper" nozzle interested me, everything else was not particularly impressed.
For this nozzle in the planetary twist, another landing slot is made, which is not in previous models. It's a pity, I would like to adapt such a thing.
But the price is actually declared baboutmore.
Therefore, if I was asked whether to wait for a new one or buy 090 or even 080, I would recommend 080/090.
If asked whether to take 084/094 or 080/086/090/096, then I would advise you to focus on your needs. I preferred the 080/086, although I already had a normal blender and a decent processor, which I rarely used anyway.
I don’t regret my choice.

[Sens]

Sens, Surely, models of cookies and slightly simpler models such as sensation will appear in late summer, early September, before the sales season) At Kenwood, new items almost always come out for Russia during this period.

hope you won't regret ditching the blender and processor. Separately, not in the 96th configuration, it will be a little expensive.
Look at the branch, what to look for when receiving the CM.
Good luck!

For some reason, these attachments did not attract. I plan to purchase other attachments later
Thank you)

is it worth buying 096 or 094 now? After all, there will be a new model soon?

I have a need for a car, I have been choosing for a long time, but you can't keep up with all the new products. I read the forum and many of my old favorite caches are not ready to change even to the current induction, since everyone is happy even with the simplest models.
Therefore, for myself, I have already decided what is worth), especially since the price is quite acceptable given the initial prices for them several years ago
Maybe someone has a link at hand for some video of unpacking 094? I can't find ((I come across unpacking 096 but there are additional nozzles and I want to understand how everything should be packed for 094, because some write that some empty spaces come across

The new one is promised to be launched in June.

There are enough changes - and a new socket in the head to connect a whisk and a sweeper at the same time. And another wheel to turn and press. And there are plenty of changes, including a bowl with a hole in the front and a lid with a pimp for this hole.

Another question is how much these changes have improved the functionality.
For example, the backlighting in the new Titaniums is a nice thing, but it does not affect the functionality.

A new sweeper, a hinge (a piece that attaches to the handle and throws food that has climbed up into the center of the bowl), a modified hook - that's very interesting. But there won't be any practical comparisons until it hits the market.

Any novelty in any direction of technology cannot be cheaper or at the same price as the old model. But, sometimes, with the release of a new one, the old one may become cheaper a little, but this is not a fact. Therefore, it is everyone's personal decision to wait.

But, sometimes, with the release of a new one, the old one may become cheaper a little, but this is not a fact. Therefore, it is everyone's personal decision to wait.

Another question is whether the old cookie chiefs will remain on sale before the new one appears. Judging by the numerous shares on them, the Russian kenwood is doing its best to get rid of them so that the warehouses will be empty by the time new ones appear.

A new sweeper, a hinge (a piece that attaches to the handle and throws food that has climbed up into the center of the bowl), a modified hook - that's very interesting.

Of all this, the old model (which is not that old) cannot only be adapted to the sweeper, which is why I see it as an interesting innovation for me.
Everything else can be easily adapted to previous models, because it seems that the shape of the bowl has not changed.
However, it won't be long to wait, we'll find out soon.
I do not expect a special miracle from the hook, it is unlikely that it will be much more successful than the current one with a spatula at the end, although who knows ...
And the "bump stop" on the bowl is probably a useful thing, but I didn't need it yet. What if "wow!"

[Olga VB]

Of all this, the old model (which is not that old) cannot only be adapted to the sweeper, which is why I see it as an interesting innovation for me.

Olga VB, the main innovations, but they cannot be adapted to 096, it is much higher temperature and programs, KM began to resemble a cartoon. Perhaps this is "wow". For me, these are two different versions of induction CMs, and it is very early to write 096 into the "old" ones, this car has occupied its niche and settled down very firmly and thoroughly.

[Peter Push]

Peter Push, I wrote

interesting for me innovation

For example, I rarely need 140 * in Cash, I don't even remember if it was. In addition, I have a MV with programs. So what exactly are these bells and whistles for me not the most interesting. In general, then everything is according to what I wrote earlier, including

it won't be long to wait, we'll find out soon
What if "wow!"

Sisters, who can promptly tell you that the induction bowl can be cooled in cold water, who has tried it?

Metal - what will it become! I cool when necessary.

[Paul I]

Paul I, Miranda, everyone has long known about your great and pure mutual love.
Nevertheless, I regularly have to cleanse the topic of your bickering.
Why are each of you so helpful and self-aware member of society member of the forum, and when you meet on the same page - you just go crazy with each other?
I will not figure out if there was at least some rational grain in your bickering on the last 4 pages (!!! Four, Karl!), I will just delete them.
And I very much ask you to simply ignore each other henceforth, at least in Kesha's topics, if you cannot coexist peacefully.
Did you agree?
I also ask you to stick to the branch theme. For idle, pseudo-verbal, hypothetical and interpersonal statements, we have a lot of "chatters", for example, a chat topic.
Good luck to all!