Kenwood Kitchen Machines

When I asked about the action (there was also not all the money available) I was told that it would last until all the cars were sold. With bowls on the stock the same. I contacted the manager and he put the car in reserve.
We agreed to what date.

Good afternoon, dear forum users! Induction Kenwood will be brought in today. What needs to be checked at the car upon receipt? I read here that some people check everything for almost half an hour. Sorry, maybe the question will seem stupid to you, but I'm worried before such a purchase. I would be grateful for your answer!

Good afternoon, dear forum users! Induction Kenwood will be brought in today. What needs to be checked at the car upon receipt?

Which basically works. And the sound of the engine running. It should be fairly uniform and free of parasitic overtones.
Otherwise, there are 14 days during which you can check up to complete satisfaction and in which case, without explanation, return the car.

[Vlad_Ru]

Pavel, why is Kitcher a good mixer, a good mixer, and if you have money and use it only for this, please.

Vlad_Ru , for as long as our forum has existed, the question has also existed - Kenwood or Kitchen. 90 percent of those who buy harvesters, first of all they say "please advise, I want a good kneader ..., and then each about his aspirations", but first of all - good dough... I think, Miranda put a fat point and ended the debate by showing the competition for kneading the dough of various kneaders, including those indicated above, and the analysis of kneading by specialists (see the branch "Kenwood. Working with nozzles". p.95. Kitchen, like a kneader, loses to Kenwood).

I called the firm. I asked about the loan. They said the harvesters do not give credit, which is for the action. I can’t sleep as I want.

Exit: either save up or a bank loan (if there is confidence in the stability of work, that is, earnings). The first is preferable, the purchase of a combine is not the case for which a loan is taken (especially my opinion). And here we all, each in his own time, experienced the feeling - I wish I could. Check out the German website of the Computer University. Good luck to you!

Good afternoon, dear forum users! Induction Kenwood will be brought in today. What needs to be checked at the car upon receipt? I read here that some people check everything for almost half an hour. Sorry, maybe the question will seem stupid to you, but I'm worried before such a purchase. I would be grateful for your answer!

I checked the presence of native "seals" on the box (self-adhesive strips), packing, completeness, absence of cracks, chips and scratches on the components. Didn't include it in the network. I was delivered by a transport company, and it did not turn it on from the cold. There must be a discount card and a recipe book in Russian. Calculation of cash / non-cash, discuss with the operator, cash register at the courier. Prepare your passport too: you will need to fill out a form.

Now they also give a second cup as a gift, eh.

also climbed to look. Yes, great!
Of course, I can do just fine with one bowl, but actually it's wonderful.
Whoever cooks a lot is given a gift.

About Kenwood's check.

Watch the unboxing on YouTube

1. Check the package contents.
2. Turn on the machine. When changing the speed to 3ku, there may be a slightly ragged sound, this is a feature, do not be afraid. The rest are approx.
3. If they give, pour a glass of water into the bowl, turn on the heating to the maximum, and put the mode to the right (1). Just do not forget to put on a protective cover against steam, without it it will not turn on and beep. Boil in a few minutes. While it is boiling, check the equipment.
4. Check papers / documentation

But if you are in the office. store bought, then everything will be ok.
Good luck!

And how to check for those who live in the middle of nowhere, and the delivery will be a simple shopping mall, which only issues the cargo.
Zhenya, Evgenia, how did you get it? What did you check? Share as a countrywoman, all the nuances

[lena_letochka]

lena_letochka, I had a delivery of TC KIT, I think that you too. An SMS will come first, then they will call you back. The only thing - they called literally 10-15 minutes before arrival. You can call the shopping mall in advance and clarify. Our approach to the house is not very convenient, it is difficult for a car to park during the day. Therefore, we took the parcel from the driver on the street, looked to see that the box was sealed, and signed the invoice. And at home they themselves have already opened, unpacked, etc. It seems like all the nuances have sounded. Have you already sent Kesha?

Have you already sent Kesha?

Not yet, only Monday. I have my last payment tomorrow. I paid through Qiwi and there is a limit.
Thank you Evgenia.

[lena_letochka]

lena_letochka, and for payments via Qiwi,% is charged?

1. Check the package contents.
2. Turn on the machine. When the speed changes to 3k, there may be a slightly ragged sound, this is a feature, do not be scared. The rest are approx.
3. If they give, pour a glass of water into the bowl, turn on the heating to the maximum, and put the mode to the right (1). Just do not forget to put a protective cover on your head against steam, without it it will not turn on and beep. Boil in a few minutes. While it is boiling, check the equipment.
4. Check papers / documentation

But if you are in the office. store bought, then everything will be ok.
Good luck!

I ordered it on the website that you indicated above. They immediately called back, said they would deliver today. But the courier never called back, I don't know what to think. Today is Friday. Apparently too lazy to stand in traffic jams.
Thank you very much to everyone who responded for the advice! I hope there will be some clarity tomorrow.

lena_letochka, and for payments via Qiwi% is charged?

No, there is no commission, but there were limits and the payment had to be broken. I'm crying for the second day)) Tomorrow is the last)
But I pay through Alfa Bank banking

[Lenusya]

Until March 20 in mvideo there is a discount on the Chef Titanium with both a large bowl and a small one. Ordered a KVC7300S with a 4.6 L bowl

Lenusya, if, buying Kenwood, in the first place you have a dough kneading, then with my post I will bring confusion into your thoughts, sorry, but I think you should know this before buying. Take a look at the "Kenwood. Working with nozzles" https://Mcooker-enn.tomathouse.com/in...com_smf&topic=121798.1920 on pages 95 and 96, messages from Miranda (answer 1894), tia (answer 1915) and lou (answer 1916).

Good day everyone!
My thanks and best wishes to the moderator and active users
The other day I became the proud owner of a Kenwood promotion. Everything is fine, but it was not without a fly in the ointment - there was no warranty card. MVideo received an answer that the guarantee for the check is 2 years.
Request to owners of Kenwood KVC5000T to take a photo of the coupon, where it is clear that the warranty is 5 years
Will be as an argument when claiming a coupon from MVideo
THX!

[manul]

manul, the Kenwood website also has a 24-month warranty
🔗

I was also told in mvideo that there is a check guarantee. But the coupon was in the box and the seal was put as a result. After calls to GL mvideo.

🔗

This is not Kenwood's site.
Contacts - pavilion at VDNKh

Here is the office. Kenwood website - 🔗
Where can I change languages ​​and get to the office. sites of other countries.

[FIRM]

MVideo received an answer that the guarantee for the check is 2 years.
Request to the owners of Kenwood KVC5000T to take a photo of the coupon, where it can be seen that the warranty is 5 years, (this was previously discussed on page 141, but the photos are small and nothing is visible)
Will be as an argument when claiming a coupon from MVideo

five years old FIRM warranty. 🔗

Added on Tuesday 21 Mar 2017 05:25 PM

One gets the impression that they do not want to provide Russia with a 5-year warranty. The warranty extension service has not been working for a long time,

Here is the site

By purchasing one of the unique Kenwood CHEF kitchen machines, Kenwood meat grinders and juicers before December 31, 2017, you can become a member of the premium service program.

Participating products

1. Kitchen machines Kenwood Chef: Cooking Chef - KM084 / KM094; KM086 / KM096; Titanium - KMC010 / KMC050; KMC013 / KMC053; KMM020 / KMM060; KMM023 / KMM063; KVC7300S; KVL8300S; Sense - KVC5000T; KVC5000B; KVC5000G; KVC5000P; KVC5000Y; KVC5030T; KVC5040T; KVC5050T; KVL6030T; KVL6040T; KVL6050T; Premier - KMC570; KMM770.
2. Meat grinders Kenwood: MG515; MG516; MG517; MG520; MG700.
3. Juicers Kenwood: JE850; JE880.

Within the framework of this program you are provided with:

- Extended warranty period up to 5 years for the purchased product.
- VIP-service: prompt service and home visit of a service specialist. *

* For Kenwood CHEF kitchen machines only
* Only for Moscow and St. Petersburg

button participate active

There is not a very large number, 5 or 6 digits, which are near the outlet of the power cord from the car.

Hard to see, in the Kenwood column, the top line is kitchen machines and kitchen machines with induction - the service life is 60 months, and the warranty period is 60 months.

Olga, you posted a warranty card on page 141 and it seemed like it was decided that the warranty was 5 years?

Added on Tuesday 21 Mar 2017 06:11 PM

Vlad_Ru, tried to use it - writes that a non-existent number was entered from the machine from the nameplate entered

Similarly, I entered the number on the bottom of the car, it also coincides with the number on the box and starts with 01xxxxx (7 digits in total) and got the result - "You entered a non-existent serial number"
By the way, in the instructions, the first two digits should indicate the year of release ...
I called the hotline - they promised to transfer information to whomever they needed and wrote down an email for an answer

I was also told in mvideo that there is a check guarantee. But the coupon was in the box and the seal was put as a result. After calls to GL mvideo.

Actually like this:
5-year warranty. Provided by Kenwood himself, or rather DeLongy.
And carried out by serial number.
In any case, I recently handed over an almost five-year-old car to the service (this is the same demo sample that was fitted to me for disassembly) and the fitting master was only interested in the serial number. He looked somewhere at his base and said that the car was still under warranty.

[Paul I]

Paul I, 5 years from the date of purchase.

If there is no receipt, then from the date of production.
And you, in this case, are lucky that 5 years have not passed from the date of production.

If there is no receipt, then from the date of production.

I do not exclude that Kenwood has a database with the dates of sales of his equipment. In any case, the premium segment, which is covered by a five-year warranty. We need to clarify.

and where to find this serial number

On the bottom of the car there is a barcode with the inscription serial namber on top and numbers below.

and where to find this serial number in the books the seller did not find. I photographed the box and the car itself.

This is how it might look

[Vlad_Ru]

Vlad_Ru, by the way, the one on the bottom sticker with only 7 digits large - this is what is needed for a 5-year warranty.

For induction, this sticker near the exit of the cord from the machine, on the side, does not need to be turned over.

And which under the barcode is a long one of numbers and letters is a serial for repair.

And which under the barcode is a long one of numbers and letters is a serial for repair.

Yes, it was on him that I "punched" the number from the service workers.

There are 14 days for a return without explanation.
But whether to return - it's only you yourself can decide.
First, calmly spend the night with this thought.
Then compare all the pros and cons of both choices - you can even write.
And then calmly make a decision, for which, let me remind you, there are 2 weeks.
But I am sure that with any choice of cache it will not let you down
Good luck!

Comparisons don't work on their own. If you can tell me!

Everything is so transparent:
nozzles, adapters, power, warranty, user reviews, appearance, price, size ...
something the same, something different, something is preferable, something does not matter ...
Good luck!

[VetaS78]

confuses KM08. This is model 96. Or am I missing something?

VetaS78, that's right, don't worry

[Vlad_Ru]

Vlad_Ru, tried to use it - writes that a non-existent number was entered from the car from the nameplate entered

I have the same story. It looks like this is a problem on the Kenwood site. Something doesn't work for them.Two years ago I registered a 5-year warranty for the 010 model. Everything worked out the first time.

Good day everyone!
And so I report
There is a problem with registration for 5 years (a glitch of the site and base), and Delongy recognized this.
To obtain a certificate, you can apply directly via e-mail, indicating your data and machine data.
You can also contact the "hotline", since a phone with a free number (by the way, the more calls the faster they make)

They didn't confess to me
I called on Tuesday and today, they just said the information will be given to specialists
Isn't this address by chance?

They didn't confess to me
I called on Tuesday and today, they just said the information will be given to specialists
Isn't this address by chance?

On the line they do not recognize it, I found out through service workers
at the expense of "soap" you can try info on this one.

[VetaS78]

confuses plastic nozzle - a long stick with small blades at the end and a knob on the other ...

All newly minted Kenwood growers are interested in this thing.
This is a stick stirrer float from a blender
I immediately guessed))
I sat down to read the instructions after about a month of use. Well, for decency.
VetaS78, it helps the products to mix, otherwise it happens that the lump will stick somewhere and will not get to the knives. You can interfere with a stick without damaging the equipment.

Congratulations on your purchase, let it last long!

[time]

Tell me, who recently bought the induction Kenwood - was there a coupon with a number to order a recipe book?

time, Victoria, I bought at the end of February, books with recipes were in a box with the car.

They immediately gave me a book in Russian.

I bought in January 096, there was no coupon. At first I was upset, but now, after sitting here on the forum, I am not upset
Friends bought a promotional one for 6 attachments a week ago - there was a coupon.

Svetlana, Duc you first whip a thread, and then in fact you will regulate.
Maybe everything is fine with you.

I'm trying to whip marshmallows - 1 protein and 125 g mashed potatoes and does not whip (((only a whisk goes along the top and that's all
my husband tried to unscrew the washer in a broom - it does not spin (((says - I'm afraid to break it. I tried it in a plastic stirrer - the washer easily unscrewed there, and it sits tightly in the whisk ((

husband tried to unscrew the washer in a broom - it does not spin

should spin, because this is how the whisk is lowered. It's not for nothing that they give the key.
No need to twist the hook!

Maybe someone tried this jar with a knife from the AT358 blender

Will not fit.
Mini Chopper Already.

[VetaS78]

my husband tried to unscrew the washer in a broom - it does not spin (((says - I'm afraid to break.

VetaS78, Svetlana, I also unscrewed the nut with difficulty in the whisk. And yet it turns!

I bought in January 096, there was no coupon. At first I was upset, but now, after sitting here on the forum, I am not upset
Friends bought a promotional one for 6 attachments a week ago - there was a coupon.

Irina! Thank you, you thought! Because of the attachments, I took part in the action and brought Kenwood, which was given as a gift. But, since I bought induction, I immediately decided to give this one and did not consider anything there. There was a coupon. And in induction, no. Thank you for your hint!

[time]

time, Victoria, try to contact Delongy directly Kenwoodinfo @ write your details and the machines where you bought and indicate that the coupon was not given.

For induction, kenwood_bt laid out pdf
🔗

And the "book of recipes for kitchen machines Kenwood Chef and Major" is immediately googled, but torrents and all sorts of file exchangers, therefore, without a direct link.

Miranda, thank you! But I really like paper media
I made a request. They promised to send from 1-2 months. And I looked at 96, the book is in 5 languages, 3 pages each. Apparently I opened it for the first time in German. But there was still no Russian.

Oh, girls, I took the most sophisticated 096 so that it would not be excruciatingly painful and would not want something even cooler.
Fortunately, the action, and the blessing agreed to wait a month while I collect money.
I would not take induction, I would like to grow and grow, and so already the limit to perfection.
I don't need a new induction - I don't like the sensor (it seems to me less reliable than mechanics)

Quickly as delivered, like the other day they just paid. Great! Do you, or rather, have a combine 2 bowls?

Quickly is not the right word. Promised 24 brought 23. 20 sent. In fact, three days! This is super fast for Crimea.
Yes, Zhen, I have a spare bowl! )) Fortunately! True, I don't bake a lot and often, but what the hell is not kidding ;-)
come in handy
Zhen, you seem to have taken it too recently, it's a pity that there was no share then ... I saw that the share was immediately written to the manager to put the cup in reserve. But she said that you need to hurry up - the number is limited. But I took the souffleka for 2400 rubles. and somewhere on the website I saw 1400 ...
Somewhere you find, somewhere you lose ...
I want a rub, well, maybe a chopper, but it's not clear from the discussions: either he grinds sugar into powder, then no ...
And rolling is coming to me (I ordered it from a girl on the forum)

well, maybe a grinder, but it's not clear from the discussions: either he grinds sugar into powder, then no ...

Melet

Colleagues, I have a sadness: ((
Sens does not raise his head ... a month of all for him .. Press the lever on the side, the head does not peel off. Apparently a spring is sticking somewhere ..
If you dance, then it snaps off, but after lowering it does not rise again. Do we have anything for such a sore? Bring it to the service?
For a couple of weeks, dad actively used the meat grinder without me on it, I suspect that he pressed hard on her ... Apparently something happened to the spring ..
Help!

Colleagues, I have a sadness: ((

it immediately seemed to me that this place was weak (
here it seems there are no problems yet, but from the first time something strained ... intuition did not disappoint.
I will watch closely. I use my own very rarely, since it is a dacha ...
Take it to the service, of course. Tell me later, pliz, what and how
Good luck!

[lena_letochka]

lena_letochka, just like Miranda's in the photo on the left
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=121798.0

just like Miranda in the photo on the left

Ty ... I'm not so sophisticated culinary specialist)) no, I don't need this yet.
I wanted a noodle cutter to roll out, but maybe I’ll move on to a pasta machine, so I’m thinking.

There is a special attachment for Kesha - you put the dough, like in a meat grinder, and squeeze it out in shape. There are different forms. I watched the video, probably I'll buy it myself.

Tell me what is the difference between the at956 and at957 ice cream nozzles? Just the size of a plastic bowl or something?