Kenwood Kitchen Machines

And everyone buys smaller machines and attachments there and approx.

Not quite ok. I'll tell you my buying experience. Perhaps it will be useful. I ordered nozzles from stock and with a delivery time of up to 4 days. I paid. A week later, I am confronted with the fact that one of the items is missing and the order was sent without it. Then they returned only the cost of this item without the surcharge for its delivery and fees. In addition, I could replace the position with a similar one, so as not to lose on conversion and delivery. In short, everything came very quickly and intact, but opened a dispute for the return of a certain amount for the delivery. So be careful, but while there is a "car as a gift" promotion it is better to buy here.

[Sergey01]

I was just watching induction 096

You ask where the link to the attachments is, then you say no delivery.
And someone will read and believe, without even realizing that you are not commenting on my link, but something else.

Therefore, when you write something like "this does not work", specify.

Sergey01, all shops have jambs.
So dear Magaz.

Ozone took me a parcel once for 5 months. And I did not give money, because the status is on the way.

The car as a gift is not suitable for everyone, because not everyone needs this particular model.

[Miranda]

Miranda, I have read many letters back from you, a relative (brother, if I’m not mistaken) bought a knife in Ukraine for a mini-grinder, and in this connection I’ll ask if there are 6 liter plastic bowls there, and in which city did I buy it? My parents are in Cherkassy ...

[LenaPena)]

LenaPena), bought in Kiev.
But I didn't find plastic bowls in Ukraine, and a stirring stick. The rest + - is.

On page 141 there are links to several Ukrainian sites.

I read it in reviews / comments on one of those sites that separately it would not be cheaper to use a mini-chopper nozzle. And I thought it was cheaper ... maybe I don't think so?

Added Monday 27 Feb 2017 02:38

A joint purchase of bowls is not expected? At first I didn't understand the desire to have a 2nd cup, but now, I think, three or four cups are needed, and preferably 2 inductions of them)))

[LenaPena)]

LenaPena), so depending on where to buy.
Sometimes you can catch on Avito for 3 thousand.

But I somehow counted at Ukrainian prices, where I happened to buy an additional knife with a base for 390 hryvnia (now there is a 410 price). This is about 900 rubles. Two glasses on another Ukrainian site - 200 hryvnia, which is about 440-450 rubles.

In total, the assembled set - a knife with a base + 4 cups - 2 thousand + -.

If you buy in Germany in their service center, then it came out to separately collect under 40 euros, and this is already 2.5 thousand. And after all, there is also delivery.

If you buy a new one as a nozzle, on the same CU, then there is 56 euros without delivery.

I didn’t google the knife with the base, only cups, but I don’t remember their price.

Added Monday 27 Feb 2017 02:50 AM

A joint purchase of bowls is not expected?

Well, I am planning a joint purchase, but, unfortunately, it is postponed again, because I have force majeure now and I will soon be out of the Internet for 3 + - weeks.

But I would not organize bowls there.
It's not about the price, but the volume of the package. Even four bowls are already a decent box. And if it's ten, then I can't even imagine. Plus, now, they say, there is a problem with the joint venture with the customs because of the number of one item. And such a large box would attract attention.

Yes, at least 2-3 people to cooperate, bowls, flexi of the old model ... it is desirable, for me, from St. Petersburg, but this is ideal)) .. I ordered a soufflake for Kenwood BT, cheaper than on Amazon ... or you can found there, I do not speak German ((

And what kind of caches do you have?) I ordered a soufflake in kenwood-bt (512yu), minus 7%, I have a discount there (if necessary, I can share it by phone number), it is more profitable here, and 511yu is more interesting in Germany (it seems to CU) saw less than 2000 rubles.

Posted Monday 27 Feb 2017 3:53 PM

Flexy, I meant the old model, k-shaped, the girls like it more, as I understand it ...

Added Monday 27 Feb 2017 3:57 PM

It seems to me that a 6L glass bowl will be very heavy, I don't even know ... I still want a plastic one)))

and the joint venture for what was planned?

I hope it will take place, at least in May
Little things are planned there

for blender
- new knife
- stirring stick
- gaskets

for mini chopper
- knife
- cups
- gaskets

beaters, hooks, spare elastic bands for flexi

different attachment parts
but I would be worried about plastic covers, to be honest, how they will get there, but I would not worry about a pin for a food processor for a high-speed socket

all sorts of little things such as covers, spatula, rug, brush, rubber feet and other small things, if anyone needs

Personally, I want a blender knife and a stirring stick.
But delivery is more expensive than their cost, so I want a joint venture

[LenaPena)]

LenaPena), just look at the previous page

https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=467617.0

[zvezda]

zvezda, happy!
I mix flour in a biscuit, or squirrels in a savoyard, or in a soufflé.

That is, everything is gentle where necessary, the souffle is a cool nozzle.

Hello everyone, help me understand if everything is fine with my cache (km096). When the induction is turned on, a strange sound similar to the crackling of wires sounds from the ventilation compartment under the bowl, there is no smell, then this sound disappears, then it appears again. Is this normal?

In some specific instances, clicks are heard when the heating is turned on and off. This is the thermostat that is triggered, and this is normal for heated appliances.
The same is true in irons, toasters, and other appliances.

I would not say that it looks like a click, more like a crackling and grinding that lasts 30-40 seconds, then disappears and reappears

yes, the sound is straining and I have such an electric one, either a crackle, or a discharge sound, but the machine is running, it does not smoke, so it’s ok

Could this lead to further breakdown?

This is normal ... because induction is the ratio of the modulus of force F with which the magnetic field acts on the current conductor perpendicular to the magnetic lines to the current in the conductor (and the length of the conductor)
I also sometimes crackle and tiles too !!

[Olga]

This is normal ... because induction is the ratio of the modulus of force F with which the magnetic field acts on the current conductor perpendicular to the magnetic lines to the current in the conductor (and the length of the conductor)

Olga, thanks, I thought so, but in other words

Good afternoon everyone! Finally, I joined the ranks of Kenya's owners! As soon as I came across this tmku, I immediately decided that only Kenwood was needed and no other analogue! I chose for a long time, since autumn, until I studied everything. At first I thought about taking with a smaller bowl, but now I'm starting to make cakes to order, and I also like to pamper my kids with sweets, so the girls were advised to take a larger bowl. So I chose model 060 and yesterday this miracle came to me !!! And it's not as huge as my husband and I thought, it fits perfectly into its prepared place! And as it turned out, it was not at all noisy, just like my hand mixer, in general, some positive emotions! Eh, now we will add all sorts of tasty treats !!!

[Albinka (Alya)]

Albinka (Alya), congratulations! The machine is cool, you will see it very soon!

[Albina]

Albina, good choice, congratulations from the bottom of my heart! You will love him, you will see.

Share your experience! Has anyone tried proving yeast dough in induction kenwood and fermented yogurt?

[Kriloni28]

Kriloni28, I strain constantly, but I haven't tried yogurt. With the proofer, everything is simple: the temperature to the required degrees, the speed to the left by 3, the lid from the splashes on the bowl and the mustache is ready.Albina, my sincere congratulations! Let it serve for a long time and not know wear and tear!

Hello everyone! I speak 096 for almost a month. The induction crackles and I hear ultrasound, the others don't hear it, but I can't, like a knife on glass ... in a portable hotplate it's the same thing as a garbage 🙈 I started dumplings today. He was a poor little shaker and creaked all over ... 1 kg of flour. scary, suddenly breaks. Although for 65 thousand it should be century old.

More. Can stirring be switched off during proofing? Strains every 30 sec on and off

I coped with the custard dough with a bang, there were no dances with many pans.
I also made stalemate bombs for mousse cake in it. For a long time she could cope with it in a saucepan - the yolk curled up and that's it. And with kesha and a whisk with a bang!

And I also need cups for it. Few of one. Sometimes whip the yolks separately, beat the bedlocks separately .. 2 pieces would be taken

Can stirring be switched off during proofing?

no, you can't. Only together.

[Kriloni28]

Kriloni28, I strain constantly, but I haven't tried yogurt. With the proofing, everything is simple: the temperature to the desired degrees, the speed to the left by 3, the lid from the splashes on the bowl and the mustache is ready.Albina, my sincere congratulations! Let it serve for a long time and not know wear and tear!

Thank you

Hello everyone! I speak 096 for almost a month. The induction crackles and I hear ultrasound, the others don't hear it, but I can't, like a knife on glass ... in a portable hotplate it's the same thing as a garbage 🙈 I started dumplings today. He was a poor little shaker and creaked all over ... 1 kg of flour. scary, suddenly breaks. Although for 65 thousand it should be century old.

This strange sound worries me too

[Kriloni28,]

Share your experience! Has anyone tried proving yeast dough in induction kenwood and fermented yogurt?

Kriloni28, All this can be done in KM Kenwood, but in an oven with a light bulb you will get the result no worse, but more economical.
And yoghurt can also be made in MV - no worse than any yogurt maker.

Anastasia, you cannot turn off stirring at all.
Incidentally, this is another hint from the manufacturer that processes such as proofing and yogurt are best done elsewhere.
The fact that you hear ultrasound is your individual feature, there is nothing you can do about it. But you can talk to dolphins
About kneading a dense dough.
Unkillable technology does not exist, no matter how much it costs. It's better to stick to the manufacturer's recommendations. How much dense dough is recommended to knead according to the instructions? Read, please.
Read about additional bowls in the topic about attachments. There are also "native" options at the appropriate price and very cheap replacements.
Good luck!

[Albinka (Alya)]

Albinka (Alya), congratulations, great car!
May it please and work forever

***

Has anyone tried proving yeast dough in induction kenwood and fermented yogurt?

Proofing - yes. And Rita has already answered like
Yogurt is not. Why is there yogurt? Still, it does not close very tightly.

***

I hear ultrasound, the others do not hear it, but I cannot, like a knife on glass

This is your rumor.
I can hear when the phone / tablet is charging. No one in the family hears, but it beeps to me.

But I don't seem to hear the car.
She has some sounds, of course, but not strong and not annoying.

I coped with the custard dough with a bang, there were no dances with many pans.
I also made some bombs in it

Yes, choux pastry is so easy and quick, I am still surprised and happy.

How do you make path bombs?
Can I have a recipe? Interesting!

[Albinka (Alya)]

Albinka (Alya), Congratulations!!!!!! Let it only please you !!! You will definitely love him
And about the recipe, I'm also interested

Girls, thank you all))) thanks to you, I chose Ken. Ato all rushed between Bosh and Kesha. I already fell in love with him in absentia, even when I read your reviews, and now I just do it !!!

Somewhere here I read that they are crushing the K-shaped cabbage.
I don't remember who wrote, but thanks to him

Now I have fermented a 3-liter can of cabbage.
She chopped half of the pump with a food processor, then cheated with a K-shaped one. That is, in fact, she worked for Kesha on bring-bring-transfer. I did everything myself

[Miranda]

Thank you Miranda for memory !!!!! : a-kiss: I'm just in time !!!! Hurrah!!!! You won't have to crush it ... and how much did you put in the bowl ???

[zvezda]

zvezda, but here's a half-squad and laid.

Yes, I forgot to say!
I put a little bit so that the head with the attachment dropped, and not rested against the cabbage. And then she did it. Or, you can put everything down, not completely lower it, let it clear it with your hand, and finally lower it.

First, at the minimum itself, but as it lifted, it turned on at speed 1. I was afraid that something would get stuck between the nozzle and the bowl and lock it.

[Miranda!!!]

Miranda!!!
🔗

I don't remember who wrote, but thanks to him

Your humble servant
And I also suggested turning on the induction at 40 ° (more juice secretion)
I chopped the expressway straight into the bowl. I didn't even have to shift

[igel _el]

igel _el, Thank you

And the whole volume of shredded is straight?

[Miranda]

Miranda, yeah, half a squad.
True - it turns out great and the pens are clean

I report along the axis.
I tried to fix it with a hammer in 3 positions. And the third, in the upper fixed state, turned out to be successful

Yesterday I saw the same trouble with my Keshenka ((Olya thanks for already describing the solution to this problem, threw her head back and carefully hammered the axle back with a hammer for meat!

Girls, help me decide. We need a food processor, more a dough mixer. I am considering Kenwood KM 636, but I doubt whether its 900 power will be enough, will it knead a tough dough? Also Princess 220125 DeLuxe, I can't find a word about this anywhere. This one has a capacity of 1200 and a bowl is slightly less than 6 liters, but it's scary to buy a pig in a poke.

Brought a huge thank you for the advice on the bowl lid from multi redmont

however, I never found who ...

it turns out there are sets

very decent quality
I was lucky today to buy such a carousel, because of the crumpled box it was discounted, and it cost me 99 rubles.

Added Sunday 05 Mar 2017 00:22

yes, it easily stretched over the 6.7 l bowl

This Redmond set also has a great spoon! It is hard, does not bend, and the very tip-rim of the spoon (2 millimeters) is soft silicone. It is very convenient to stir, etc. I have been using this set for a long time. The rug is just lying around.

in April ... the rate will not rise.

Where does this information come from?

Added Sunday 05 Mar 2017 10:23 pm

AT - where the pin is flat.
I don’t remember what kind of socket there, like a pin.

This is called a slot.

Where does this information come from?

If you hadn't taken it out of context, you wouldn't have asked this question either.

Could this lead to further breakdown?

In theory, it can. I had something similar with a car that was driven for parsing. Ultimately, it began to turn off spontaneously. Handed over for repair. Now I'm waiting for the replacement of the power supply.

[Paul!]

Oh Paul!!!! Where have you gone? : spiteful: This is not a very modest question ... but do you accidentally disassemble refrigerators with electronic control?

Oh Pavel !!!! Where have you gone?

Yes, nowhere, here I am. It's just that they mainly discuss recipes here, but the subtleties of cooking, and this is not for me.

This is not a very modest question ... and do you accidentally disassemble electronic refrigerators?

No. It makes no sense to disassemble. They are disposable today. Can't collect it anymore. And what is the question?

I have Korean .... it throws off the settings at every opening ... the electronics are junk, the train is too high to look at .....
Sorry for 🔗

I have Korean .... it throws off the settings at every opening ... the electronics are junk, the train is too high to look at .....

If the control unit is on the door, then I think there is no problem, indeed, the connecting cable is junk (most likely power supply).
For a more or less sensible electronics engineer, work for an hour (it takes a long time to disassemble).

I can't reach the top !!!!
Do you happen to be in our area ??

I can't reach the top !!!!

so this is most likely a stool or even a stepladder

Do you happen to be in our area ??

alas, we would be glad to paradise but sins do not let