Blender with replaceable knives Element EW06

[Anna]

Anna, absolutely right!

[zvezda]

zvezda, Olya! What is this Kesha blender model?

Thanks to the twig again, today I tried it and made a pie with plums with a whisk, and made mayonnaise, though my son did not appreciate him, give Sloboda from a bag :)) and made mashed potatoes with a blender with a nozzle. All liked it!

Element's mill is good, but small. I made powdered sugar from two tablespoons of sugar, black pepper and white peas, also two measuring spoons, it turns out well and quickly. Great for spices, but not enough for powder. We would release an additional two or three times more and sell them separately
The greens are also not bad, I chopped a small bunch, which I usually crumble into a portion, but it sticks a lot to the walls, to the knife and the lid, it's still easier for me to shred on the board with a knife.
I forgot about the mill, when the garlic pressed on the cutlets, for old memory I passed it through the garlic press. :-)

And the knife turns out to be nothing - she chopped the nuts and cut her finger.

[Anna67]

Anna67, Anechka, I also have sharp ones in six months - I must carefully remove, at first I used a brush, now I remove it with my hands

[Anna67]

Anna67, kartinkaof course the knives are sharp, they are made in Japan by the KAI firm !!!

I have a sushi knife and nail clippers of this brand - I am happy as an elephant with the sharpness of these tools. Above all praise!

I have another attack of a blender wish - I’ll go for tea and take the path of prudence

I picked out the nuts, and there the knife turned up, not visible under them. With two blades, which is the most inconvenient in terms of cutting. Probably it was necessary either to go to the mill, although it is not big, or to use another blender to use the dough for noodles ... but it was almost chopped into a paste, great.

Taak ... now I also have an attack of Wishlist - I want a pedicure nippers

[Anna67]

Anna67,

Anh, they are sold under the MEHAZ brand. As I found out, there is a KAI brand on the back of the wire cutters. I risk getting scolded, but I am writing from my phone, so I can't insert a picture - just refer to Amazon for those that I bought.
🔗

By the way, KAI also makes various sewing scissors for JANOME, also excellent reviews on them.

Helen, Twig, temptresses yyyyy !!!

I want to praise our Element))) At the beginning of summer I bought myself a KitchenAid 5KHM ​​9212 EAC mixer. In general, I bought it because of the whisk. And I have a submersible Bamix blender. And now, when I have Elementic, Bamiks immediately "left" on the shelf, and Kitchen, with his whisk yesterday. The element perfectly copes with the task of whipping proteins, kneading dough for lazy khachapuri, applesauce for Belevskaya marshmallow. In general, now I think, why did I buy Kitchen?)))))

[kubanochka]

kubanochka, Lena, why did the Element subdue so much that bamix went to the shelf?

why did I buy Kitchen?)))))

Well, in a way, yes. However, I do not get bored with Bosch - he whips the whites separately while I immerse everything else.
No, a good blender - I cut my finger again, this time on the other hand, and with a high quality, almost like a tomato crosswise. Well, let's hope that krovushki is now drunk like a witch's sword samurai and will serve faithfully.

and why did the Element subdue so much that the bamix went to the shelf?

I wanted to ask the same

and why did the Element subdue so much that the bamix went to the shelf?

With a complete set))) Exactly as a blender, maybe they are similar, but the presence of a whisk, an emulsifier, a mill puts the Element in the first place. And a stand with a place to store all this stuff !!! I'm not overjoyed

[kubanochka]

kubanochka, the most equipped bamix also has enough good. True, there is still no corolla and emulsifier. But there is a small grinder with graters.

I'm very glad that you like Element so much.

[Miranda]

Miranda, yes, you said / read my thoughts about bamix ... I have it hanging and there is a mill ...

The undoubted advantages of the Element
- sharpness of knives
- spatula and glass
- a stick for emulsification, although I hear a lot about it, but I still haven't watched the video and haven't seen the results of its work in the kitchen

- GREAT price for this blender quality



kubanochka, Lena, thanks for the live comparison

the most equipped bamix also has enough good.

I am not the most equipped)))

True, there is still no corolla and emulsifier.

it was because of the whisk that Kitchen bought. Here Element's whipping quality is much better than Kitchen's.

Here Element's whipping quality is much better than Kitchen's.

Very interesting, thanks.

[Lenochka!]

zvezda, Olya! This is what model of Keshi blender?

Lenochka! Sorry .. just saw HDP404WH

[zvezda]

zvezda, Olya, thanks! And I thought from the picture that the 408 is a model.

[julia_bb]

julia_bb, you will, Yuliashik, take turns whipping and comparing.

Now, as it turned out, I also have three: Shteba, Element and a simple Phillips .. Something I thought, I thought and decided that I would also keep Shteba for myself. If he doesn't ask for food, then let him stay.

The Element liked the whisk, glass, whisk stick and stick to clean out the leftovers.

stick to clean out the remains

My favorite spatulka

I bought several similar ones, but there was one bend, and it still slips back from the sides. And here on both sides, and you can use one side, the other, depending on - nothing falls, everything is convenient, cleans off so that at least not mine

And a brush.
I haven’t tried it yet, I was dying like a plushkin. Recently I found another brush, not even taken out of the bag, for a long time I tried to find what it was from. Judging by the pictures in the instructions, it turned out to be from a pastamash. Another glass from Kuzina was also found in the bag unopened ...
But the blender is all printed. It is a pity that neither of the attachments and motors coincided.

Yulyashik, beat and compare in turn.

Come on, until 3 is enough, with one in the country)
But I still can't take the Element from Miranda

And a brush.

I have not tried the brush yet, but with a spatula stick I tried to get sour cream out of the jars. How cool! Now in a conspicuous place and always at hand.
I tried to make an omelet with a whipping stick. So the omelet was whipped so that one frothy cap was in the pan. I had to correct it with a spoon.

[Rituslya]

Rituslya, she's a wand. And I generally stopped whipping an omelette since I read that it is not necessary - there is less movement of unnecessary ones.

I want this blender, then I don’t ... I think it might be more powerful to take. Is 120W enough? I understand, the question is stupid, since so many people use it and everything seems to be fine, I have an old Boshik for 250, even whips the protein into a foam, but doubts plague

I support.
The blender handles frozen food perfectly, what else is needed.

Element and the European version of KAI (in Europe, the original name was not changed) - 5000 and 12000 rpm. And the original Japanese version has only two differences from the European one: 1) a leg without a rim; 2) 180 power and revolutions - 12000 and 17000 rpm.

Everything else is exactly the same, even the recipe book, just in Japanese. See pictures under the spoiler. How to collect and wash from the Japanese below under the recipes, we have over. All photos and recipes are the same.

🔗

Japanese in two parts
🔗
🔗

Bamiks has options for power.
Both Bamiks and Kai (Element) have motors of a completely different design - direct current. They don't need to write marketing 1500-2000 watts at all. power. Both Philips, Bosch and others cannot work for 5 minutes without stopping, only 30-60 seconds, or intermittently. And for a corolla and protein, this may not be enough. Or for cream.And not every submerged ice breaks.

For me and for 5 thousand, which I bought for the action, it seemed good, and for 2.5 thousand or someone from the city without Auchan with delivery for 3 + - thousand came out - very good. Features, equipment, beautiful, comfortable base. Only a modest set of one leg and a glass from A-brands, or indistinct B, C and D brands are cheaper.

[Victoria]

stupid question

Victoria, very normal question! Personally, I didn’t have enough power for MY purposes ... although maybe I’m just used to more powerful

[Victoria]

Victoria, I also did not have enough power, I put it in the closet)), I will only use the emulsifier nozzle.

I have previously described my impressions.
Blender with replaceable knives Element el'blendia EW06PR / EW06PG # 794

The blender seemed to me too low-power, but I judge so far only by mayonnaise. Mayonnaise without eggs in milk did not work, it turned out from the recipe from the book. I bought a Redmond submersible blender for mayonnaise with one leg and several knives (but I never used them, there are brand new ones) and its power is 950W. With it, mayonnaise is obtained faster and a larger volume. And the Element is still on the stand and awaits further experiments. Yes, I also tried to blender red currants with them, so the skin and bones gather around the knives.

Veta, Olga, Svetlana, Marina, thanks for the information! He is such a cute element, for now I will probably refrain from buying, I read about a more powerful model for the element.

[Ne_lipa]

Ne_lipaThe element does not develop a technique itself.
He buys a license for production in Russia. Therefore, he has one blender from such a company (the Japanese), the second from the syakoy, the multicooker from the third (Koreans), etc. That is, if one model is successful, this does not guarantee that the other is just as cool ... Because they were developed by different firms. The element is not a brand such as Kenwood, Philips, and so on, where the brand + is equal in quality to the line.

He is such a cute element.

He is cute and this particular Blendia attachment and spatula ... no words! I would just leave it because of them .. but this is the 5th blender would be 🔗 that's why I broke up ..
This nozzle has no analogues, it makes .. I can't even describe .. a mousse structure, and it makes water just like an oxygen cocktail.
It's up to you, depending on what purpose you take.

I have two element blenders in my household. one with magic wand another Element el'stick pro EW08PW. I can’t say anything good about the second: the whisk is useless, the leg does not grind well, the power is not very good. in short, the model is unsuccessful. I have Phillips very happy, my daughter Brown is also good.

[kora]

kora, and they, by chance, do not interchange nozzles, for different Elements? :-)

no there the principle of connection is different.

What a pity!

[Crown]

Crown, no need to say. Three blenders (acquired by overwork) and nothing is replaced anywhere.

And I really like this blender, I make milk mayonnaise right away with garlic for zucchini-fried eggplants, in an ordinary 0.7l jar, but with an ice knife, because this knife looks like a phillips, and mayonnaise comes out great for them. Usually half a serving at a time. I put everything in it, in a jar: three cloves of garlic, 75g of milk, 1 hour. l. sugar, 0.5 tsp. l. salt, 1 tsp. l. ready-made mustard, 1 hour l. vinegar 9%, refined oil 140g. I made it with knives in ten seconds, cut the greens on the board, added, stirred with a fork. I have a favorite jar for a blender, and then for a PMM.

I use it instead of a spoon. I made pickled eggplants for storage in the refrigerator, it is necessary to stir 1 tbsp in 150g of raw water. l. salt, 2 tbsp. l. sugar, 10ml vinegar essence 70%. Stir with a whisk, poured 1 kg of peeled slices of fried eggplant + four coarsely chopped raw onions, garlic, hot pepper pod.

Made minced meat. pepper, pouring with a puree knife: fresh tomato + sour cream + a little sugar-salt blended.

I am very glad and satisfied with the purchase. The thickness of the plastic on removable legs is generally delighted, the stand is cool, it is convenient to carry, there is even a picture, the back cover is removed - I hooked it into the upper hole with my finger and pulled it out, the attachments change by unscrewing - I am generally delighted, how convenient, I unscrewed the leg - the motor on my head put it on and you don't think it will roll off somewhere (thanks to the girls for the idea). The most convenient, well thought out, high quality blender. Smooth, glossy, weighty.

Before its appearance, Phillips 1372 was used, flimsy, thin plastic, it is difficult to change the legs with buttons, then I will snap it obliquely, then it is not completely, it is generally difficult to remove it, you tear out this leg just barely, the choppers immediately stopped spinning on the cottage cheese, a knife and a whisk remained, and paid 3800.

I drink a cocktail every day, no sweets are needed.

and they, by chance, do not interchange the attachments, for different Elements

They are completely different!

An element as a firm is a composite hodgepodge of other firms not represented on the Russian market. The element does not produce anything, it only buys the rights and translates documentation and packaging into Russian.

Therefore, it always has El in its name followed by an apostrophe. El'Chef (slow cooker), el'blendia (this blender), el'stick (another blender). Like, a la such and such a company, a la such and such. In many cases, the original name follows the apostrophe. For example, blendia is the name of a Japanese blender from KAI, which is our blender. At the bottom of the bowl, by the way, there are Japanese characters (if anyone hasn't noticed).

Blender el'stick pro - someone else's company, not Kai. Therefore, the mounts there will be different, as they are different for Philips and Brown. And the quality will also be different. Just because you like something from Element doesn't mean that everything else is just as good.

[Miranda]

Miranda, of course, brothers One, but not blood, and stepbrothers. :-)

[Crown]

Crown, I would even say - receptionists. Genetics are 100% different for everyone

I didn't like the coffee grinder in this blender.
I could not grind coffee and sugar into powder., I was afraid to burn it. Returned to the Bosch coffee grinder.
Does anyone get powder? Maybe I shouldn’t say anything?
But the emulsifier is just a bomb! So the cocktail whips

Even in Mediamarkt I saw a meat grinder-juicer, about 3500 rubles, I wanted to buy it, but out of 6 copies, none of them had a knife.
So I went home upset, the next day I went again taking a knife from Axion from the house. But, he didn't fit! I wanted so badly, but ...
Model
Meat grinder Element El'master EW07MB, Black, with ozone, only the price is not interesting

Does anyone get powder? Maybe I shouldn’t say anything?

It turns out, but I only ground two tablespoons of sugar and with a cover.
I wrote earlier, the mill is super, but very small. Spices grinds perfectly, literally from a couple of coffee spoons and up to two tablespoons, and I grind Zelmer for a large amount.

Genetics are 100% different for everyone

that's what she meant.

[Galina]

ground only two tablespoons of sugar and with a cover

Galina the same thing, a couple of spoons, first without, then with a cover. Well, if it turns out, then I'll try again

I don’t know, I’m in a mortar with spices. From the fact that there is no way possible anise (not needed) and cinnamon bark. I haven’t tried cinnamon in the mill - I can smell this piece to splash against the walls. Peppercorns have a battery-powered mill. Since the day of its manifestation, I do not buy ground.
Powder - there is an old coffee grinder which, except for this, for nothing.
Advise on what to plow the mill of the element?

Advise on what to plow the mill of the element?

I had it for the nuts, all the other pribluda are smashed into smoke, and here the nuts are chopped, the pieces feel like I love

[selenа]

selenа, OK.
Who else plowed where?

[Anna67]

Anna67, I shredded garlic and greens, the longer, the smaller.