Blender with replaceable knives Element EW06

[Zhanik]

Zhanik, a Miranda writes;
The element of Seberia broke down two years later, it's not clear why, it's fair to say. But this is the only case among members of the forum. I have had it since August 15 - I can't get enough of it.

Natalia, I also have CF, which was initially sneezed into the tail and mane. And she received the defect after the warranty and through my fault. So there are no complaints about the quality.
But to find an elementary spare part for it, referring to all the declared services, it turned out to be an-real. Some even disown the Element altogether, like the devil from incense (((I was unpleasantly surprised. In the end, they coped with it on their own.

[Zhanik]

Zhanik, I agree that it is not scary, that it broke, and that the service was not found.

Hope mine won't break, and nobody's.
At least 7+ years - from the beginning.

[Zhanik]

Zhanik, I agree that it is not scary, that it broke, and that the service was not found.

Hope mine won't break, and nobody's.
At least 7+ years - from the beginning.

Miranda
Yes. I'm very satisfied with the quality.
But if the representatives of the Element would pay attention to this thread, as some other manufacturers did to theirs, and established relations with service centers. This would certainly increase sales.
But so far this service is not even in its infancy. Considering that I live, for example, in St. Petersburg.

[GuGu]

GuGu, tell me, dark, where to watch this blender for 3500, I myself can not figure it out. .. you are welcome



Miranda, I will repeat the question - give me a link where this Item for 3500 can be bought. If you order through this online store, will it be ok? Will it get there? I repeat, I have never bought anything through online stores.
And thanks: rose: for sending me here. I am still not very oriented so as not to violate anything

[kartinka]

kartinka, I don’t know this online store, I didn’t buy it there, I’ll not tell you what and how. But Stadler is a respected firm, everything should be fine.

Links here
1.red - 🔗

2.gray - 🔗

I will then remove the links after Blackfride ends, as they are irrelevant, since the price will again become + 50%

Good luck with your first online purchase of your life.

[Miranda]

Miranda

[kartinka]

kartinka, yes, in Russia 948 rubles.
In Moscow 348 or free of charge from pickup.

A form pops up there - to order a call.
Order tomorrow. For dates before 26, you have to buy.
Good luck.

[Miranda]

Miranda, Miranda, Miranda, Miranda, thank you very much now the main problem is handsome, which color is better?



Well, that the girls, like the necessary buttons pushed, ordered a call back and an order. So I smoke and wait. The continuation of the banquet is terribly interesting ...
I didn’t quite understand about payment, but I hope that all questions will be resolved by calling. I like the gray Element, you can call it Mouse. I'm going to read the thread from the beginning, so that at least I know what he can ... otherwise I'm still waiting for nothing but milk mayonnaise and nutella. .. something I was confused again, but this is from the debut
I read the thread, I found so much interesting ... and .... something pulled on the red color. Can the white from vegetables dye? I have a Bernette harvester, a jovial old man, a great helper, as I have made up my face from carrots. .... many years ago, it is still visible.
BUT ... he will be a mouse anyway (because with a tail: girl_in_dreamшs :).
I don't understand how bright it is
Today, although it is Saturday, but some hectic just sat down. I share the news - The mouse is paid, I just don't know how long to wait. : girl_red: If only I could get there safe and sound

My little red is already at home, handsome But tests and impressions will be only after December 8, I leave for days and not before cooking

[GuGu]

GuGu, well, and I'm still waiting, waiting
But nothing, I'll wait a little longer, a good road!

[Miranda]

Miranda, Thank you! What a wonderful spatula, now she got the last drop of sour cream from the can

[GuGu]

GuGu, the spatula is my love!
Favorite spatula available, most comfortable.

In due time all the brain has eaten, where else to buy the same.
I bought similar ones and everything is not right. Here in the subject a couple of pages ago I told you what I found in Japan only. Gonna get a bundle.

[Miranda]

Miranda, I read about the search, if there is an opportunity, please take me to the company

Gonna get a bundle.

If possible, I will join too. Although they haven't brought me Mouse yet, I probably also need to buy a comfortable spatula, otherwise I won't find it myself. ....

Gonna get a bundle.

I'll stand in line too, although I have a different blender

I'm also in line for a spatula.

the spatula is my love!

And mine
And also a cool whisk, I use it perfectly even without a blender

[Seberia]

Seberiai'm so sorry you got broke

I'm still thinking of making an upgrade, or rather, I don't know if it will work out, the Japanese are cunning, there is no clear description, or Google translates poorly, but I want to buy another leg from the Japanese version and a couple of disks that should theoretically stand up. And if not - thrown away money

[Miranda]

Mirandaand I'm sorry. I really liked him.
I left myself a plastic base from it (well, a spatula with a whisk), now I hang Phillips on it

[Seberia]

Seberia, and the nozzles were thrown away?
Suddenly someone will lose the knife, will look, and here you have

Suddenly someone will lose the knife, will look, and here you have

I didn't think this way at all
I threw everything out, as a reminder of the short life of this device

[Seberia]

Seberia, eh ...
but I most likely would have thrown out of the frustration too

the spatula is my love!

Excuse me, please, I'm reading the topic from the bushes, but I remember about the scapula, I thought that the question was already closed. I don't have a blender, but from the photographs I saw a very similar shape in "Kitchen Items", I can't find it on their website, suddenly a store is nearby. The size is like a normal silicone scraper (5 centimeters high), but like a spoon, with a depression.
And another one

🔗

[Kubeba1]

Kubeba1, tried many almost similar ones, and it's not that.
Proportions and softness / stiffness and curvature on one side only - incredibly comfortable, and have not yet met with the same convenience.

Clear. I’m even wondering what kind of spoon it is. I would start a blender with joy (I even put it in the basket), but the previous one is still alive

Oh, this is my favorite shoulder blade. I use it every day. Today I cleaned the bowl of the harvester from the minced meat. She not only cleaned, but licked everything as if she had been washed. I take care of her and hide her from everyone, otherwise they will accidentally harm her or drop her on the hot burner el. plates. Why are these spatulas not on sale anywhere, even on Ali they are not!

[velli]

velli, here I am ashore and hide from the hands of others

You can buy on the Japanese Amazon, but they do not send to Russia, but to Europe, America - please.

Links under the spoiler, otherwise the hieroglyphs in the link become krakozyabra

🔗

or

🔗

I also found a strange site, it even writes rubles there, but I don't understand how to order from it. This is the international version of the Japanese site, they write that they send it around the world. But I can't figure out how to order and make a joint venture. Maybe someone has more brains?

🔗

Proportions and softness / stiffness and curvature on one side only - incredibly comfortable, and have not yet met with the same convenience.

🔗

[Irsha]

Irsha, not at all

today they brought my little red mouse. This is the first purchase on the Internet, I do not know if I did the right thing - the courier was in a very persistent hurry, so that it even bothered me, I opened the box with his help, I regret not myself. It seemed strange, so I checked all the attachments and knives. I want to clarify right away - about the knives, I only have sharp meat (where there are 2 blades, I press with my fingers - nothing, I won't cut myself, but both blades cut the paper. The same situation in the mill, even in the mill both knives are duller, or it seems .. .: girl-th: For mashed potatoes it is not at all spicy, for juice there are two sharp small blades that look up. Nozzles put on everything - everything seems to be good - and they dress and take off and hold themselves to the knife as one put it on - I'm afraid I haven't tried to take off the mill either yet I made milk mayonnaise - something I didn't really like, it turned out not as thick as it usually was with the old leg.Although the recipe and the products - as usual, I made a small portion in a small jar with a stick - the process with the participation of the stick was delighted , but the result did not please ... I will try again tomorrow, apparently I need to get used to the stick a little. Regarding the buttons for switching on the speeds, the low revolutions turn on easily and hold the button quite easily, the high-speed button is in Turns on with great effort. Pressed directly into the body, deep enough. Whisking the protein with a whisk is not an effort that would be straining, but I did not expect ... the protein whipped perfectly but I had to hold it. This I am not finding fault with the mouse, apparently you need to get used to it. On the old leg, the speed was regulated by smooth movement up and down without effort, how to move the lever along the scale, as far as she understood, although she might be right, so not to confuse to start work with the low-speed button. Is it the same for you? The mouse itself is pretty. My handsome man is already standing on the spot, blended like a native, tomorrow we will continue to get acquainted. If it were not for the box, which seemed to be opened on the sides, I would not have worried. And the initial persistence of the courier to quickly help open, and then his constant rushing - well, my husband did not hear, and did not come up ... in general, I wrote a bunch of firewood, everything seems to be fine, but some kind of sediment, although maybe the box was opened at the border ... selectively? Although there is no such thing, the cargo travels by train, the carriage with a seal must be. I am writing, sort of like arguing with myself. I forgot to say, the mouse is really sooooo quiet at work. I think that with my husband's sudden night (sometimes) Wishlist will be just right
Ps that some kind of worker attacked ... I'll go do halva ...

[kartinka]

kartinka, do not worry about the box and the courier, maybe he was just in a hurry.

I seem to have no effort when pressing, or I did not notice, because the girl is strong

I always pour oil by eye. I have never taken exactly this much. Rather, some portion at once, and then add as needed. Therefore, I cannot say, because every time there is a different number of ingredients, and the milk can be different, and I will squeeze out the lemon in different ways.

And the knives are not sharp, they don't need to be sharp. I’m not spicy in a Kenwood blender glass either. Although, at first it was also surprising

Looking forward to the next experiments!

[Miranda]

Miranda, I went to get acquainted with the Mouse further - we will stir up the halva for a couple, here I will try the mill and I can’t wait until tomorrow

[kartinka]

kartinkaoh write a recipe please!

And remember that the coarse one in the mill is first without a plate, and the plate is already when you grind the coarse one. Well, following the example of coffee - beans without a plate.

And that there is a time limit with the record.
I missed it for the very first time.

steamed halva

And I join the request. We don't have such a thing, and sometimes you want soooo! what if I can do it!

For mashed potatoes not spicy at all

It doesn't have to be sharp I confirm

Let the mouse please! I was also very impressed with this blender. If I didn't have bamix, I would probably have taken KAI. I really respect this brand!

[Svetlenki]

Svetlenki, but the Japanese Kai differs from the European version, which is sold here or there in Germany. Squeezed for Europe, and sold with another plug

They have a slightly different motor and a different foot.
The Japanese version is quite similar to Bamix.

European
- 2 speeds: low - 5000 rpm; high - 12000 rpm
- max power 120 W

Japanese
- 2 speeds: low - 12000 rpm; high - 17000 rpm
- max power 180 W

And a leg without a skirt, everything else is the same.

[Miranda]

Miranda,

You know, I started "digging" this brand after I got a sushi knife from them and MEHAZ nail clippers. I was very surprised when I found the KAI stamp on the wire cutters. And then I also found KAI scissors, which they make for the Janome brand ... Very interesting manufacturer's policy! But the quality of sharpening, metal is beyond praise. Here is the feeling that Japan, not China ... But I can be wrong, how do you understand ...

And the blender, yes, is very similar to bamix. Perhaps in addition to the main knife, well, and the removable part, there is almost one face ... Only Kai has a richer equipment

[Svetlenki]

Svetlenki, well, what they do for the European assembly is knives. And they are in the Element from Kai.

They have a lot of blenders. And I want to try to order for myself this leg without a skirt and two discs from their other blender with a similar leg, which in theory should fit, because the dimensions are similar - this is a flat disc and a disc with, as I call them, prompter booths

That is, I am ready to risk money.
I studied in detail only this blender, in the sense of the difference between the European version and the Japanese, and in Germany the same (like the German Amazon and the computeruniverse on our forum), almost all Kai blenders are presented. But this one is considered the eldest wife

From this I want two disks, if only they fit
🔗

I still want kaye blender cups, although this is pampering

In rubles, this is approximately 820-850 rubles.
500ml and 1,200ml

🔗

And I want to try to order this leg for myself without a skirt and two discs from their other blender with a similar leg, which theoretically should fit

Logically speaking, they should not "bother" with the production of knives of different diameters and different modifications for blenders - only the increase in production costs is completely unnecessary and confusion. So there is a sense in risk

And the price ... in Europe is inhumane ... Girls who snagged for 3500 or 4000 are a super purchase!

[Svetlenki]

Svetlenki, so I think so! It is too expensive to do similar things that differ by 2 + -mm. This is a separate machine!

The motor, it's a pity, is not sold separately, but I don't need a second blender + another plug + it's expensive for them. But the disks are obtained at 260 + - rubles. Not a big risk, leg of risks - about 1.5 thousand. But unless it can stop a woman when you take it out and put it

But it all started with a spatula and its search!

I still want kaye blender cups, although this is pampering

And you will oooomhnesh, I showed you these glasses !!! The price in the English Amazon is crazy, of course. The Japanese are nicer ... Well, here's a basket of Wishlist on the Japanese Amazon

leg of risks - 1.5 thousand approximately

Which leg do you want? So that she was without a skirt? And on YouTube, if you look for an advertising video, maybe they shoot there, put their foot on a blender? Have not tried?

[Svetlenki]

Svetlenki, I do not remember

Yes, without a skirt. But from the same blender, according to the pictures in the instructions, there is no risk, my confidence is 99.999% But suddenly what a trick.



I can't figure out which is better. With or without a skirt (or rather, a rim).
If the meat, then it is better without, and if it is liquid, then no difference. It seems so to me.

***
I also have one wishlist from the Japanese Amazon, spied in the kitchen. little things.

🔗

But I'm not sure if I need this toy

Hello again! halva turned out to be a mill works great, I will explain, I have a whirlwind mixer (dough hooks, beaters, a coffee grinder by the size of a coffee grinder and now a broken plastic submersible with a plastic type knife ?? Or what to call it. Previously, halva-grinding of seeds made a micro proportion in a vortex mini-coffee grinder, a mouse mill 2 times more (the output is ready now 340g) or in the processor of the combine - a large portion.Plus a mill - you can make a small portion of halva from nuts, grinds perfectly, but in a mixture with flour I also rubbed my foot with a nozzle for ice. The leg itself did not seem to be very hot from above, but the leg, yes, became hot, although it worked for less than 5 minutes for sure, and the finished halva seems to be less in volume at the exit. While it cools down, we will try tomorrow ...: crazy: judging by the mass, it should turn out excellent uniform. My Mouse works QUIETLY, so surprisingly there was one problem - I was very afraid to remove the knife from the attachment. I don’t know if it’s possible, I cleaned the mass as best I could by hand and turned it on in a cup with water, washed it to clean water, then I got the nerve and somehow the knife took off, dried the knife on the battery, put it on, put it on right away. But the question of how to remove it remained open on the buttons, everything is still - the low-speed one is pressed perfectly, conveniently and easily, the high-speed one is somewhat strained. .. well, well, you have to get used to it. compared to how it turned out on the Whirlwind, the difference is immediately visible .... although it may not be worth comparing them, but this is my first blender. In the processor of the harvester, nuts and seeds are pounded in time longer, there is a power of about 400 W, and the Mouse has -120 in total, but apparently, the matter in turns is therefore faster and more uniform. I liked everything, I just worry - I rubbed the seeds dry - maybe you shouldn't strain the Mouse so much? Although I tried to work impulsively tomorrow we will continue testing

[kartinka]

kartinka, interesting!
And really looking forward to the recipe.

The knife is removed with a brush and a spatula - they have it at the end so that you slip it under the knife and take it off. The instructions are also in the video on the first page.

[Miranda]

Miranda, I do not know if there is a recipe here - seeds 165g (danced from packing) flour 77-80g, sugar 60g, grows oil - half of 1/3 glass faceted (clearly written?) Water 5st. spoons.
The initial proportions of seeds are 2 cups with a slide, flour and sugar, 1.5 cups each, 1/3 cup oil grows, water 10 tbsp. spoons.
1. Lightly fry the seeds over low heat, fry the flour until light beige. The fire is small.
2. While the flour is fried, grind the seeds. At first I grinded coarsely, then I put an overlay on the mill and in flour. I ground it in several approaches.
3. Combine flour and ground seeds. Fry over medium heat, 5-7 minutes. The mass will not be dark, it is important not to overexpose, then it gets dark.
4. Boil the syrup, just started to thicken, add vegetable oil, knead until boiling, remove from heat to cool.
5. Here I worked with my leg with a knife, where 2 small blades up, rubbed with impulses and pressed down. The rubbed mass creeps out of the nozzle, already clearly darker. But I was afraid for the Mouse, rubbed without fanaticism. It's a pity to strain him on the very first day
6. Mix the resulting mass into the syrup. Cover the bowl with plastic wrap and lay out and level everything. I put it in a cold room to cool down. As it cools, ready, you can cut it. Or immediately sculpt candy balls, you can then glaze them. You can add at the end -coconut, raisins, large nuts, pieces, in short, differently. Now I made packets of peeled seeds according to the calculation. You can add butter to vegetable oil, but I ran out of it ... it turned out 340g. I added a little crushed nuts - left over from the sprinkling of the cake, so that they would not be lying around.
Everything is very fast and simple, it takes longer to write ...
Ps
-The paddle is really handy ... I didn't take pictures of the process, I don't know how they are inserted. .. about the mill - thank you, I remember - I read the branch while waiting for delivery
Everything about the knife needs to be reviewed again, I'm scared to approach it again, I'm afraid to break

[kartinka]

kartinka, thank you, so I'll sleep and try to understand, but at the first reading, everything looks not complicated and understandable.

[Miranda]

Miranda, it's really time to sleep, and the recipe is very simple, I'll wait for the pictures, interesting. and thanks again for the help

Girls, did anyone try to grind the poppy in the mill? I made a roll with poppy seeds, tried it, the element did not cope. I’m somehow disappointed. The knife from the blender did not take the ice cream cranberries either. Or is it ozone, I'm already beginning to doubt that I bought the original.

[shoko11]

shoko11, and the knife from the blender also did not take the ice-cream cranberries.
This morning, I made a cocktail with cranberries. Knife -2 small blades up, according to the instructions, for juice. The cranberries were practically from the freezer, the usual small size (we also have cranberries in our stores - Chinese freeze - they are much larger) started to blender from the berries - the mouse did well. Yesterday, in the night, the little hands reached for halva (fortunately, it works soooo quietly, which is surprising for me), in the morning when I was spinning the first berries, my brain did not come to the kitchen ... because only then I thought that the first thing to do was to pour in at least a little liquid. But it turned out great, the cranberry pieces felt quite a bit, I made the cocktail on low-fat yogurt, it came out thick, but sooooo airy. For me, after the old Whirlwind, this is a breakthrough. Do not worry - you still need to try, halva-cocktails I got, and yesterday's mayonnaise in milk, too, according to a proven recipe, did not thicken. Although the girls are more experienced here, they will tell you how best to do it, I have only experience in the evening

[kartinka]

I also have one wishlist from the Japanese Amazon, spied in the kitchen. little things.

Very interesting thing! The Japanese are inventors! How they love to make their food delicately-beautiful-miniature!

kartinka, thank you very much for the halva recipe!

there is still one Wishlist from the Japanese Amazon,

Will come up with