Bosch MUM Kitchen Machine Accessories

I understand that I want Mum 4 series, there you can shred into any dish.
In MUM 5 series, the shredder is tied to the bowl.
I have a lot of negative reviews on this thing in my photo, it breaks down often.

Mum 4 series, there you can shred into any dish.
In MUM 5 series, the shredder is tied to the bowl.

I haven't tried it myself, but I read that if you press a pimp at 5, you can also go into any dish. And so I have 2 bowls - this moment does not bother at all. I have it basically a kneader.

I haven't tried it myself, but I read that if you press a pimp at 5, you can also go into any dish.

but from here in more detail. Actual

As I say, I haven't tried it myself. I read it clearly here.

Yes, and I'm wondering about the pimp. The first time I've heard

I found Pimpka. Pressed without a bowl, a hook started working, he stood. It is pressed very tightly, it is necessary to press hard. Put a stick at the disposal of chtol, any bowl on it

Well, where is this pimp?

Right here

[Zeamays]

I have a lot of negative reviews on this thing in my photo, it breaks down often.

Zeamays, strange. I have a harvester since 2011. So far, TTT, no complaints. I use it quite often. Autumn is generally every day. and there are no questions or complaints about the vegetable cutter or the meat grinder. Although I make not only minced meat, but also different sausages. But I was lucky, my equipment was Germany-Slovenia (something from one country, something from another). Now they have moved production to China

so I have 2 cups - this moment does not bother me at all

Anna1957, I also have two. I bought the second plastic one. Now I use it for dough and vegetables, and knead the minced meat in steel. Well, I don't see a big problem stopping for a couple of minutes, transferring everything from the bowl to something else. Plus, the motor is resting

Well, I don't see a big problem, stopping for a couple of minutes, transferring everything from the bowl to something else. Plus, the motor is resting

So I do it. A couple of minutes is a lot. Pour out 15 seconds

[about discs for shredding]

Generally, about discs for shredding:

I suppose at the moment I have a complete set of them, and all other attachments for MUM 5. If there is, then I will indicate the code of each disc, if not, then I will indicate the article of the product (taken from the official Bosch website).
Initially, 3 discs were included with the vegetable cutter: coarse / fine grater NR2 and NR4 - 00083572, fine grater NR5 - 00080159 and shredder thick / medium NR1 and NR3 - 000 83576


Then I bought these 3: julienne (for asian food) - MUZ45G1, fries - MUZ45PS1 and for raw vegetables ("thorn") - MUZ45RS1


And I use a couple of these three all the time. These are fries - any vegetables for a side dish, mushrooms; and an Asian disc that is julienne.

I have another pair just from MUM 8: medium grater / shredder - MUZ8KP1 (the exact same disc for MUM 4 and 5 was under the code MUZ45KP1, but I did not see them on sale) and another disc MUZ8KS1 - for parmesan and other hard cheeses.


The average grater is ooooooooochen in demand. Most of all it was bought specifically for the grater, the shredder is an additional pleasant bonus. I bought a disc for cheese, well, so that everything was)
They sit on the blade like relatives


I also have a multi-mixer - MUZ5MM1. It came with 3 discs, the same as for a vegetable cutter: a double-sided shredder, a coarse / fine grater and just a fine grater. This is what these discs look like.


and here is a comparison with regular discs

P.S .: sorry, I inserted pictures for the first time ...



About sausages, sausages, sausages, wieners, etc.

About 2 years ago, she shoveled the entire forum herself, asked, but did not find an answer.I also wrote to Bosch himself - both Russian and German - but they could not answer me for sure either, so I acted using a scientific poke method)
So, the idea came to me to use our Boshik MUM 5 for sausages and the like, but initially to meat grinder MUZ5FW1 The nozzle for stuffing sausages did not go, and it was then that my search began ...

Non-native nozzles:
I looked for non-native nozzles both in the ki-ru and at Zdoroveevo. I'm not going to pickle for a long time - no, they don't fit.

Native attachments:
But among the native nozzles some kind of bedlam is going on, which I had to study on my own, so I will share, it may be useful to someone, or at least it will be interesting.
EXACTLY FITS, fits without problems and files nozzle according to the article 496951... Glorious sausages and wieners will come out of it. On the Bosch website, it is rare and flashes, yet it is not always posted on the site, so you can call them or write. Even now it is on the site of repair-equipment-ru.

But after a year I got bored of the sausages, my soul demanded variety, besides, such a set attracted me - MUZ8WS2 for three sizes of sausages: 1/2, 3/4 and 5/4. It was also possible to buy these attachments separately, respectively, the article numbers - 481181, 481182, 481183... I liked it even more, I already had the entire average size. But it is designed for MUM 8, and I had 5 and there was a chance that "this is zhzhzhzhzhzhzh for a reason" ...

ATTENTION!!!
No, set MUZ8WS2 for the MUZ5FW1 meat grinder NOT FIT !!!!!!!!

But I really wanted to be small, so I had to take a risk. I DO NOT CALL ANYONE TO GO THE SAME WAY. I just want to share my experience from the field - the need for invention is cunning.
I took the nozzle 496951 I had and took it to the turner in the most ordinary household. He naturally refused to make a new part without a model, etc., but said that he would be able to contribute to the fact that if other nozzles did not sit down, he would fit them. And then, after the New Year, they gave me just two nozzles from a set for 8 MUM as unnecessary. Yes, the Germans are not stupid here, at 8 MUM the exit from the meat grinder is wider, so the attachments did not sit down, the nut could not be tightened. Well, I, armed with a suitable attachment, the meat grinder itself and 2 donuts that fell on me, galloped to the master. An hour later, with a little dancing with a tambourine, I was given 3 perfect sausage attachments)
Therefore, if anyone needs it, I can advise where you can adjust the size. In the end, in this attachment there are no mechanisms, but knives, or anything else terrible and terrible
I forgot to mention, I did all this in MOSCOW

Girls, Tell me, has anyone come across this?
The nozzle for the dough sheeter - MUZ5NV1 - at "fine values", starting from 3, stopped fixing, and you have to hold the fixer manually. Flies EVEN WITHOUT a test

And I did not find the flexi attachment on the office site. it is generally nowhere to be found other than the Amazon.

There is a flexi nozzle on the official bosh website. It is called the Whisk Profi-Flexi for a food processor, for MUM 5, article 00659889 (Internet store, Food processors. Accessories). I bought it for MUM 4. Here on the forum the girls wrote that the attachment is suitable for the fifth and fourth series. And she really came to my MUM 48.

Polga, have you already used this flexi attachment? Doesn't fall out, sits tight? Otherwise, I read in this thread that flexi from MUM 5 does not fit MUM 4. I already wanted to order through the Chibo online store, although I saw a flexi attachment for MUM5 in Bosch's online store. If it fits MUM 48 it will be super !!!!



Although after looking closely at Masha's links from Amazon, I see that the references to the whisk are the same (flexi whisk is one item), although on the forum one is given for MUM 4, and the other for MUM5. Confused straight, is it suitable or not?

Fits exactly

[Masinen]

Masinen, Maria needs your expert opinion. I bought the same harvester from a universal computer as a kneader. I accidentally saw this topic.
Please tell me the grain with ground in the coffee grinder and in the attachment mill is there a fundamental difference?



Masha is my model. MUM 4405/05. this is probably considered mum 4?

[Lily]

Lily, I don't have a coffee grinder, so it's hard to compare)
But the mill does not grind to dust, so that just like from a factory)

[Masinen]

Masinen Thanks for the quick response!!!!! Masha bake bread with self-ground flour? Has the purchase paid off?
, is the flexi whisk suitable? And then they write for 5 mothers everywhere ...

[Lily]

Lily, my Bosik is in Bosnia, and here is Kenwood)
I will say that the attachment is useful for those who bake homemade bread.
Flexy fits, of course

[Masinen]

the mill does not grind to dust

Masinen, tell me, have you tried to grind not only grains? In the instructions there is an indication that you should not grind oil-containing and aromatic products. In my opinion, coffee is just such a product

Has the purchase paid off?

Kokoschka, I apologize, but I will break into the discussion.
I really like the mill (I have MUM5, but the grinding mechanism is the same). Grinding wheat, buckwheat, rice of various varieties, corn, oats, barley, millet, malt, bulgur, couscous. I don’t sift the end result or separate the bran. I bake bread with everything at once)
I tried this flour for pasta, but the dough came out rather dry, so I added water with a spoon and sprinkled a lot of bran from the spray bottle while rolling it. As soon as I get ready, I will make lasagna, there should be norms

[Masinen]

Masinen, Charline-MTthanks girls! I'll think!

Girls, owners of the 4th episode, tell me, eh? I have an inexpensive planetary, purely a mixer, Kitfort, I seem to like it .... But I found Bosch Mum 4406 at a good price, less than 5 thousand rubles, a markdown. I looked and liked it. But there is a question about the attachments - I need a blender (jug) anyway, and I don't need a meat grinder attachment. What do you think, will it really be possible to sell this attachment and buy a blender? The machine is all new, showcase sample. In general, is the meat grinder attachment in demand? Is it universal, is it suitable for all 4 and 5 series? Or is this a fig idea and few people need it? And the blender in the 4th series is normal? All the same, over time, I dream of Kesh induction and a good professional blender, but now I am not pulling. And I just need a vegetable cutter, but it is there, otherwise I have been looking towards the Phillips for a long time too ...

[Anna]

Anna, I just recently bought MUM 4756. I bought it at OLH (it's like your Avito), I took a very good used one. When I was looking, I noticed that there are a lot of suggestions from the attachments for all kinds of whisk-disc-holders and there are practically no suggestions for meat grinders-jugs. I bought a Mriya combine at one time and I did not need many attachments for it, so the coffee grinder and meat grinder flew away during the sale, I left the blender. Therefore, I think that if you sell a meat grinder, it is still cheaper than a new attachment, although you will have a new one. But you will buy a blender as expensive as new.

But I found Bosch Mum 4406 at a good price

It has a power of 500 watts, almost like a hand mixer.

Thanks for the idea. So far, no one has answered me anywhere. I will try to ask the dealer or buy, try and, as a last resort, return

... did you buy? suitable?

[Faith2010]

Faith2010, tatika04 has not appeared on the forum since 2016 and is unlikely to answer now.

Girls who have BOSCH 4 series. Do you have a wiper attachment like this

I want to buy myself a MUM 4756 for the harvester, but I'm not sure that it will fit. Respond!

[svetta]

svetta, I have MUM-5, but I'm also interested. This is the first time I see such.

[Anna]

Anna, I somewhere in the topics on BOSH (there are several of them) saw this nozzle and the girls spoke well of it. But I am not able to cover all the topics, so I asked here. I need to wipe the viburnum, I got muddy on sieves and colanders. And in this thread, somewhere on page 7-8, the girls mentioned some kind of rub, but without a photo and without a name, they praised it.

I'll wait and listen. But no matter how it relates to the 8 series?

[Anna]

Anna, there was also a compatibility table for it

🔗

I found my harvester model, but I want to hear real feedback. And you know that they write one thing, but in fact another. The nozzles for the 8 series fit perfectly on the 4.

According to this table, it fits the 5 series. But I looked at the picture in Yandex - it looks like it is to msm.Strange, in this table all the models are in a bunch.

I want to hear real feedback. And you know that they write one thing, but in fact another

Of course. Let's wait for the owners of both models.

Strange, in this table all the models are in a bunch.

So from there. Therefore, I am interested.

And then there is such an interesting shredding disc, I have never seen this one.

Who has one? What do you think?

that she is to msm.

I have a slightly different look on the MSM, the sieve is the same, the blades are different, but the combine is not new either, maybe the design has changed.
Frankly, this harvester (MSM5529) is mainly used in the season just for the sake of this sieve.
Light, take it!)))))

not sure if she will fit

I am also interested in this question for MUM4655 ...
Perhaps, but you need to measure, she will stand on this nozzle:
Food processor multi-mixer, for MUM4 .. 00461279 - MUZ4MM3


Originally, this wiper is designed for this bowl:
Mixing bowl; transparent with a white handle; without cover; for MCM55 .. 00702186 Replacement for 00673407 00662161

with a disc holder like this:
Disc carrier, white, with connection bracket, for MCM55 .., MCM62 .., MCM64 .. 00652366 Replacement for 00641663

and such a drive, for example MCM5529 / 01:

this harvester

MUM? Light, take it then. And throw her name, I'll look for it. Although I have Arietka, I still use it.

[Svetlana]

Svetlana, well, if you say that it fits, then I'll take it. Our harvesters are almost identical.

OgneLo, Marina, I do not have such a nozzle with a bowl, as you showed.
Sveta, and you put this rub on the nest of the vegetable cutter, right?

Anya, it just says Berry press for kitchens. combine BOSH, Siemens.

No, I have MSM 5529, corrected in the message.
I praised the quality of the work.
You wanted to listen to the owners of both models)))) .....

Look, it turns out that I'm right. Doesn't fit MUM.

You wanted to listen to the owners of both models)))) .....

Exactly. Does the nozzle fit from MSM to MUMs)))

[MSM 5529]

No, MSM 5529, corrected in the message.
You wanted to listen to the owners of both models ...

Light, did you seem to be buying MUM? or have you had MSM before? I need to go to MUM!

such a nozzle with a bowl

Duc ... she - for separate money ...
I don't have it either ... and MCM 5540, "at a tasty price", I missed ...

Arietka

and I use Arietka, I just need to cover it with a cut bag so that it doesn't splash ...

MSM used to be, and MUM is now.
This rub is put on the pin that is in the bowl.

[Marina]

Marina, I know about separate money, I just don't need this attachment. Does this rub only work with such a bowl or does it cling separately?
I thought about it. If separately, then where does the rubbed mass fall? Probably, all the same with a bowl should be, but how else? Damn, she rolled her lip. But I also can't buy MSM for the sake of cleaning, there is nowhere to store it.
So Sveta has already answered. That is, for MUM, I cannot use it myself, well, or I still have to buy this cup. So? Light, shine a light!

[Continuous process]

Yes, you need a bowl.
It can even wipe boiling foods that are fed through the filling hole in the lid and, wiped, fall into the bowl.
The bowl is full (1.5 liters), you take off the whole bandura, pour out the contents where you need it, and collect it again.
Continuous process, as in MUM, for example, a shredder, will not work ...

[Svetlana]

Svetlana, thanks, confirmed the guesses. And now a question for filling. Does a bowl with MSM wipes sit on the MCM and work? Or is there another seat? Check please.

The bowl of my MSM does not have a mechanism for attaching to the MUM's nest.
Look.
View from above


View of the bowl from below, it sits only on the pin.

Well, yes, it doesn't fit. And the vegetable cutter will not sit on the nest. So the idea is a failure. It's a pity.
Sveta, thank you, the question is closed.
Although...

You have a slightly different nozzle in the photo than mine.
Your nozzle is from such a combine MCM 5380/03, it doesn't matter to MUM 4 anyway ...

[svetta]

svetta, do not mind it. I myself searched and overlooked all these sieves from other types of combines (the Kenwoods have, I was looking for ours). Not a single episode is suitable for mum. And you won't put her anywhere ... For mum, rubbing is just an unattainable dream.

[Lena]

Lena, Yes, I got it already. Although wiping is needed, even though I use it on viburnum once a year, as soon as I remember my falling hands, I want it again.