Bakeware Nordic Ware: purchase, features, reviews, recipes

[Irina F]

Irina F, Ira! And this is a picture from which store?

[Masha Ivanova]

Masha Ivanova, from this:
🔗baking-mold-easter-rabbit-volume-07-l-extruded-aluminum-00010621238 /
I was in a store located in the Belaya Dacha outlet.
There is a fairly large selection.

[Irina F]

Irina F, Ira, thanks!

[Irina F]

Irina F, and a bunny and a lamb from two halves?

[time]

time, yes, from two halves, otherwise how to remove the product?)
My husband, however, criticized the forms, said uncomfortable. How will you fill in, asks.

I have a Zenker Easter bunny made of two halves, but if the dough is watery, then a part leaks out. We have to underlay the paper. But there the construction is different - it stands upright. And in a horizontal position, according to the logic, the dough should be level with the first half and have good lifting force in order to eventually fill the second half. If I imagine correctly.

[Irina F]

Oh, how much you baked everything delicious here, girls, well done!
Irina F, IRINA, Ira, you cut straight without a knife, oh, if I were there, I would ...

[Olga_Ma]

Olga_Ma, Ol, Duc they have internetmagaz!
True, it seemed to me that there is more choice in a live store!
Perhaps I'll be there in a couple of weeks, if you think of anything, write)

[Irina F]

Irina F, Irish, yes I saw, thanks, dear, I wonder if their prices are the same in the net and the live store, and I also thought there was a different choice

[Olga_Ma]

Olga_Ma, Ol, the prices seem to be the same. But the assortment is different.

[Irina F]

Irina F, Irish, I will decide, I will write

[Olga_Ma]

Duc they have inetmagaz!
True, it seemed to me that there is more choice in a live store!

the prices seem to be the same. But the assortment is different.

I'll decide, I'll write

Olga_Ma, Olga, think, write and see the in-tion in the LAN!

[Ninelle]

Ninelle,
Ninul saw you late, yeast dough flies out better than even muffin dough, boldly bite, do not hesitate ...

Galyus, I baked bread in them, but either did not bake the cake, or if I remember I had to bake it.

I tormented myself with molds for cake-cakes, and again began to collect jars of olives ...

And I brought you this)

There are lambs and hares in the upper part of the photo, now the price is discounted 1530r, although they are quite light and thin.

Where is such abundance ?!

I've already seen.

[Olga_Ma]

Olga_Ma, Olya, please tell me how long and at what temperature you baked the brownie cheesecake. I bake at 160 degrees, after 50 minutes the chocolate dough is still very raw, and the cake itself is badly cracked. She turned on the oven for another 30 minutes.




What is it ?! Again, my cupcake did not come out normally, or rather the brownie cheesecake out of the mold. Moreover, in this form I have already baked another cake, and it came out perfectly. Maybe this cheesecake has a different dough, so it's such a disaster. And it seems, she lubricated the uniform normally, made a "French shirt". It's a shame!

[Svetlucha]

Svetlucha, Svetlana, shape with flowers?

[Svetlucha]

Svetlucha, Svetlana, sorry for answering late, I was at the dacha, I bake for 30 minutes, but maybe 40 at 180 degrees

[silva2]

silva2, Lena, no, the form is not with flowers. Now I will insert a photo.







The most interesting thing is that I already baked a cupcake in it, only another one. He jumped out perfectly.

All the same, I really like to use spray in these forms (I have IRCA), everything flies out with a bang!
I have a lamb's form (though not Nordic) this year baked several dozen lambs with shock, with a spray just some happiness!) And, by the way, it is very economical!

[Irina F]

Irina F, Irish, where do you buy? I grease with melted butter with a brush and that's it, it flies out fine

I grease with melted butter with a brush and that's it, it flies out fine

+1 !!!

I never had any problems !!!

[Olga_Ma]

Olga_Ma, Ol, I first bought it in Italica, and recently I took a pastry chef at VTK.
Crochet, Innus, well, after a couple of failures, I no longer had a desire to check), while I use the spray and am happy!

And I also use a spray, only with ozone, Catani, nothing sticks))

And I also use a spray, but only from Metro - Carlex Spray.

And I bought Kotani and in vain: I don't use it. I follow the recommendations of the manufacturer of the forms)) Non-stick lubricant with flour from this forum - this is the thing. It is easy to make, has a long shelf life, is inexpensive and works on a par with a spray. But patiently smear any lubricant with a brush anyway. The stickiness also depends on the dough, and on the shape: if shallow deep squiggles (as in roses, for example), and dough with a high sugar content - Neither Kotani nor grease from the forum helps me. Only a very carefully applied layer of soft butter and the same thorough dusting with flour.

Girls, at Williams Sonoma 25% discount on uniforms. True, the intermediary firm that makes delivery from them raised the cost of delivery. They write that there is a 50 percent discount on delivery, but last time I ordered, it turned out much cheaper.

And today we cut the second hare. Here is a section, in real life the place of gluing is not visible. In the photo a little bit


... Today, from the scraps left after bunnies, I'll figure something out 000

And I bought Kotani and in vain: I don't use it. I follow the recommendations of the manufacturer of the forms)) Non-stick lubricant with flour from this forum - this is the thing. It is easy to make, has a long shelf life, is inexpensive and works on a par with a spray. But patiently smear any lubricant with a brush anyway.

I do not spread the spray. He sprayed so well, why? Including rosettes, evenly fills all recesses. That is the advantage of the spray - zilch-zilch and that's it)))

[silva2]

silva2, Helen, you can't see anything beautiful hare

[silva2]

I do not spread the spray. He sprayed so well, why? Including rosettes, evenly fills all recesses. That is the advantage of the spray - zilch-zilch and that's it)))

In order for the spray to fill all the grooves itself, you need to make more puffs than "puff-puff")). And I don't want to splatter too much, so I help with a brush. As in the very common video Baking the Perfect Bundt.

And today we cut the second hare. Here is a section, in real life the place of gluing is not visible. In the photo a little bit

And I didn't understand at all what kind of gluing place, until I looked at the rabbits above. You can't see anything at all. silva2, Elena, did you glue them hot again like a Christmas tree?

Well, I don’t know about smearing it with a brush ...
I don't smear anything, I just spray). Then I don't see the point, because the spray is to facilitate the work. I could not stand the smearing of forms, the most unloved moment of working with them.
And the spray is very economical, I already had a large batch of rams, and the shape is also very embossed and the spray did not even diminish practically.

Then I don't see the point

+1

spray to facilitate work

And more +1

I smear with a brush not in order to save money, but in order to avoid an excess of hard-to-wash fat, from which, moreover, not only the shape gets (but these are the details). And about the use of the spray in general, which I, a bore, have already mentioned here more than once ... Nordic warns absolutely everywhere (both on the website, and on cardboard boxes for forms, etc.) that conventional culinary sprays can damage the non-stick surface of the forms, leaving a layer that is difficult to remove. Baking spray containing flour may also be used. Do not use regular cooking spray - this, for example, is written on the cardboard for "Lily". Sprays with flour are not on sale for us (I have not met), but this, in fact, is that very wonderful non-stick lubricant from our forum. This recipe, as an alternative to baking spray, is found on foreign sites.
Eh, I like to read the instructions) And even more so, since we here many are going to leave a legacy of the form))) ...

No stubborn grease remains from the spray. And there is no easy to wash off either .... Absolutely pure form, only rinse with water.
As for the inheritance ...Personally, my opinion is just a non-stick coating. And with regular use, sooner or later it will lose its properties, no matter how high quality it is. And it is still unknown what will affect it worse, the use of sprays or the fact that they constantly crawl with a brush))))
As for the instructions, I also read, but I don't always follow 100%. Phillips, for example, prohibits water-washing the shredder cover in the instructions. Recommended to wipe with napkins. I hardly imagine this to myself, as after grinding, for example, raw chicken, I will not wash all the parts with water. Mine is many years old, and nothing happened to him from this.

No stubborn grease remains from the spray. And there is no easy to wash off either .... Absolutely pure form, only rinse with water.
As for the legacy .... Personally, my opinion is just a non-stick coating. And with regular use, sooner or later it will lose its properties, no matter how high quality it is. And it is still unknown what will affect it worse, the use of sprays or the fact that they constantly crawl with a brush))))

But I would not urge everyone to violate the instructions, because in fact, everyone decides for himself how to dispose of his property). To comply - not to comply - is a personal matter.
Regarding the inheritance of discs)) ... In fact, this comic thought appeared among the inhabitants of this topic based on the manufacturer's promises of a "lifetime warranty", which can be provided with proper, recommended by the same manufacturer, care. And these recommendations are not "from the ceiling." A simple everyday example, which, I think, is familiar to many. An absolutely new Teflon frying pan, oiled with vegetable oil, after two or three pancakes will be easily washed off and remain perfectly smooth. But after a stack of baked on of pancakes you will find on its walls a sticky, indelible with a detergent, a strip of polymerized oil. By the way, "just rinse with water" is not about non-stick surfaces, they need to be washed well, degreased after each use. They will remain non-sticky, they will last longer. it is not enough just to rinse the Teflon frying pan or the mold. They will remain greasy. Especially after the spray with lecithin. I even have a brush from a fixprice for washing, a large round, natural bristle in plastic - very convenient.

I don’t know how greasy the molds remain after your lubrication. For me, it is enough just to rinse with warm water, there is no fat, and even more so there is no plaque on the forms, they do not require any special care, absolutely clean forms. It turns out that after lubrication is required degreasing (Fairy?) And mechanical action with a brush on the coating? For me, these are additional factors damaging the coating, another + in favor of the spray.
I am not calling anyone to anything, we share our experience here. Which is often more important than instructions. Well, the manufacturer wrote that from some sprays a hard-to-remove layer remains. Why should I think about it if my spray doesn't have such a layer? I bake in forms all the time, I used each one 10-20 times at least, everything is ok, absolutely like new.

Girls! After the first purchase on the site, Williams Sonoma sends me various discounts once a week, including on Nordic forms. Now again 20% discount on some forms. At the price with delivery, it comes out a little more than 2000 tons. True, these proposals are valid for three days, and there is only a day. Now it seems until April 30th.

[vis]

vis, Ol, I agree, my forms have no plaque from the word at all! But I would not recommend washing the molds with all sorts of detergents, it is precisely these means that damage the non-stick layer, which, by the way, has been written in this topic more than once!
Well, in any case, everyone determines for himself what, how and where😃!)))
I use a spray and do not sweat. This is the most convenient for me today. Why should I strain and invent something there (although I'm sure that the lubricant is just excellent !!!), smear / smear it when the spray sprayed for five seconds!)))
I feel so comfortable)

[lady inna]

I even have a fix-price brush for washing, a large round, natural bristle in plastic - very convenient

lady inna, Inna, and can you take a photo of this brush to know what to look for? Thanks a lot in advance for your answer !!!

Girls, and my Nordic fever continues, I bought 2 more forms, probably enough ...

[Irene Malysheva]

Irene Malysheva, Irochka, congratulations, where did you order? Exactly everything, can you think of it?

[Olga_Ma]

Olga_Ma, I buy second-hand, though with labels, these were expensive but I wanted these 2 forms so badly that I could not resist

[Olga_Ma]

Olga_Ma, yesterday, in my new Rose, a cupcake stuck tightly, smeared each dimple with margarine and suddenly on you, we eat crumbs like birds

Today I baked little cookies in a new form.


Shortbread dough with nuts. They came out great and easily got out of shape.

[Olga_Ma]

Olga_Ma, yesterday, in my new Rose, a cupcake stuck tightly, smeared each dimple with margarine and suddenly on you, we eat crumbs like birds

There were no problems with Rosa Nordic pah-pah, but with Hive (also Nordic) I won't make friends in any way
And the Castle and Houses made of silicone molds were also ate with "crumbs".

[Ninelle]

Ninelle, now I will only test lecithin grease on Rose, maybe it will be fine

I baked little cookies in a new form today

Victoria, very beautiful !!

Girls, yesterday accidentally found themselves in another part of their city, and could not walk past an ordinary small hardware store. And what my surprise was when I saw 2 forms of a large Nordic rose on the shelf. I have such a form, so I didn't buy it. Maybe someone needs it? I can help out. The price was 1500 rubles. The truth is, now I will be there only on the trail. week, but I think they will not buy up, since until yesterday they are on the counter)))

[Ninelle]

Ninelle, now I will only test lecithin grease on Rose, maybe it will be fine

I smeared it with vegetable oil and cold margarine and then put Rose in the refrigerator, and smeared it + sprinkled it with flour - it works out great.

Girls, yesterday accidentally found themselves in another part of their city, and could not walk past an ordinary small hardware store. And what my surprise was when I saw 2 forms of a large Nordic rose on the shelf. I have such a form, so I didn't buy it. Maybe someone needs it? I can help out. The price was 1500 rubles. The truth is, now I will be there only on the trail. week, but I think they will not buy up, since until yesterday they are on the counter)))

A real estate (Castle, Hut, Little Houses), there by chance, at this price is not?

I can help out. The price was 1500 rubles

Can I take it? Will you send it by mail?

Only roses were lying. Svetlana, of course I will.