Masinen
Natalia, on languor she will always run here and there.

And on heating, it takes 1 hour to equalize the temperature.
Or heat the bowl on Roasting for 1 minute and turn it off and then Shteba will not immediately heat up, but will already keep it normally.
tana33
Quote: marinastom
Tan, this is just about flakes and liquid proportion, about water-milk in brackets.
the porridge is burnt, what's wrong?
I have never cooked under pressure yet
Masinen
Tatyana, Tell us how you cooked it? how much liquid, time, and what kind of porridge? Fast or long cooking?
tana33
Maria, and as Galya said, she cooked)))) exactly))))))) only by 0.3
Teflon pan from Moulinex
some flakes I have ..... not ours in general, softer

already cooked the second portion, already according to your recipe on simmering, 10 minutes and you're done
but looked, stirred, took a little more liquid
Biryusa
Quote: tana33
the porridge is burnt, what's wrong?
Perhaps the reason is in the pan
Quote: tana33
Teflon pan from Moulinex
Quote: tana33
milk porridge in my mulinex burnt if left
Or maybe sugar was added before boiling and didn't stir. By the way, it is always recommended to stir cereals with milk, even if cooked without sugar.
Gala
Quote: Biryusa
stirring cereals with milk is always recommended
This is a very important point! I mixed well, cooked without salt and sugar, then added to the finished one. Next time I will increase the amount of liquid 1: 4
tana33
Quote: Gala

tana33, Tatyana, I don’t understand, did you manage to cook the porridge like that?

ahha, it did not work out for me))) burnt and the milk became croupy

Quote: Biryusa

Perhaps the reason is in the pan

possible of course
on languor, it turned out a wonderful porridge, in 10 minutes, but I looked after

but I want to put, poke, and then poke out))))))))))

Iskatel-X
Idaho potatoes in Steba DD2 XL, according to Galina's recipe (gala10)
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=393839.0
Multicooker-pressure cooker-slow cooker Steba DD2 / DD2 XL
A.lenka
Quote: Masinen
But on Heating, it heats up a little more, and then lowers the temperature and just maintains it. Heating turns on when the temperature of the sensor drops. And so the set temperature is stably displayed on the display.
I have a feeling that my Shtebka heating mixed with languor. I tested it today. The bowl was filled with water to the maximum, and put on Heating, 4 hours, temp. 75 degrees.
First, the sensor readings were constantly changing, the numbers jumped every minute.
Secondly, at a set pace. 75 degrees - range sensor readings was from 73 to 85 (!!!) degrees. The period of oscillation (from maximum to maximum) is 21-22 minutes. This happened when Shteba reached the set temperature.
When the heating occurred, the temperature range on the sensor was approximately 68-80 degrees.

It is clear that it was necessary to monitor the temperature of the water. This time I didn't have the technical capabilities.

But ... All the same, it seems to me that even the readings of the sensor on heating should not fluctuate by such an amount - 12 degrees.

-------

But life still goes on ...
Now I have put the ham to cook in my miserable Stebka. So I think, what temperature should I put on the scoreboard with such prepads?
I don't have a thermometer now.
gala10
And I have this today:

Hedgehogs with a secret (gala10)

Multicooker-pressure cooker-slow cooker Steba DD2 / DD2 XL
I ask everyone to the table!
petu
Girls, today I baked for the first time in Shteba, I'm in a good shock, look what kind of cake she baked for me. I used small 160 ml multi-glasses, that is, it is a little more than half the norm (they use 250 ml faceted glasses).What will she bake at full rate ?? Baked on * languishing + - 1h30 minutes -120 * (and then did not open the lid yet (Shteba stood on heating for 10 minutes).Multicooker-pressure cooker-slow cooker Steba DD2 / DD2 XLMulticooker-pressure cooker-slow cooker Steba DD2 / DD2 XLMulticooker-pressure cooker-slow cooker Steba DD2 / DD2 XL https://Mcooker-enn.tomathouse.com/in...ion=com_smf&topic=68092.0 ----- recipe from here!
beverli
Well, and I have a whimper ((the plug will not come to me today, my husband unsubscribed that marriage, everything is there with scuffs and scratches (((
petu
beverli, Sorry! Yes, only her husband can drag her --- a heavy box ...
beverli
And okay add. pokotsanaya bowl, I was mentally ready for this, wrote the girls. But the cartoon itself is all shabby, it's a shame of course.
Loksa
Margarita, it's a shame. What's going on? Is it really impossible to transport, store and sell a decent product? Everyone has already relaxed, the product is not cheap, and even if it costs a thousand! What is happening! Straight outraged! Their price is tempting, but not free !!!! a drop of money will be removed and what ?! when will they begin to think about the growth of the seller's reputation, and not just shove them off ?! And we buy and hope: if only we were lucky, blinny pancake! Excuse me! I will go to the monasterywatch embroidery ...
4udo
Iskatel-X, petu, gala10how delicious you are! Already in the stomach seethed! I would have eaten everything in turn!)))
beverli, what a pity((
And my teflon perfect arrived. When unpacking it, I even accidentally dropped it (fortunately it was not very high), I thought, well, that's it ... But no, it blew through. Nothing broke. But on the stainless steel bowl there were small abrasions on the bottom (you can't call them scratches), I didn't even pay attention to them, they would appear after some time anyway.
And what about Shteba now? Will they bring a new one or have you refused to buy?
4udo
Margarita, so in fact in ozone free shipping, why drive my husband? They brought me home, I checked everything myself, looked.
You can order at least 10 times, they themselves are to blame for bringing the goods in this form.
But in this situation, no hassle for you. Just meet the courier and check everything.
4udo
petu, I, probably, tuned in that she would be sooooo big, so when I saw her, I didn't think so. It seems to me that it is quite a normal size. But you can't call her small, that's a fact.
Iskatel-X
Natalia
Iskatel-X, petu, gala10, how delicious you are! Already in the stomach seethed! I would have eaten everything in turn!
A few months of active study of the forum, and you will be no worse!
I started from zero level ...

The main thing is to see the goal, to believe in yourself, not to notice obstacles! / Sorcerers' rule for going through walls. /
Loksa
Yulia, good luck !!!!
Margo31
Margarita, I wrote this to the fact that girls love ozone, because it returns money without problems. I believe that if the product is returned, it should go back to the manufacturer, or, honestly, it should be sold at a discount.
petu
Horror, girls boys ....: crazy: I'm here. on the contrary, she took a discounted one, but it was written that the box was not opened, but crumpled, the box really was in the area of ​​the handle with a hole the size of a fist and that's all ---- The shteba came in perfect condition without kotsak and scratches (I, by the way, like many here, did not tear off the protective film --- left it for now) ...... I sympathize ...... is really a disgrace ...
Margo31
Girls!!!
I took it. Lord, what happiness it is !!!
Multicooker-pressure cooker-slow cooker Steba DD2 / DD2 XL
Masinen
Yulia, Congratulations!! Hope to be friends with her!
petu
Yulia, Julia, CONGRATULATIONS, I hope that all * circles of hell * in connection with the purchase of Shteba are far behind, only bright and good is ahead, so that Shteba grasped the situation (or understood who he or she is with you?), at what cost he was given to the owner and will not let you down ...
Margo31
Thank you, girls !!! I also really hope for a long and strong friendship !!! I must wash, do not forget
Trishka
Margo31, Julia, everything is well that ends well, congratulations!
Belka13
Margo31, Yulia, Congratulations! As they say, less than a year has passed
Byaka zakalyaka
Girls, I ordered it ..... It took a very long time to choose ... I rushed between redmond 350 and steba dd2. Redmond liked the color, appearance and the fact that the bowl was coated, and the staff had a lot of good reviews (according to Redmond, their cat cried). But the price was too high. On the day of the order, the available Redmonds were snapped up, but remained only at a price that exceeds the cost of steba ..... In short, the uncle himself made a choice for me .... I ordered a stem, I really hope to make friends and not be disappointed. I'm terribly afraid of a stainless steel bowl (I can't buy a replaceable coated one right away).Hopefully on Tuesday I'll be in your warm company.
Trishka
Byaka zakalyaka, Marinochka, do not be afraid, we are near!
We will not let you be lost!
Andreevna
Byaka zakalyaka,
Marina, which one did you order? This is me to the fact that a 5-liter one without an additional bowl costs 8094 with ozone, and a 6-liter one with an additional bowl 8490. Only 400 rubles. the difference, but the benefit is obvious
Byaka zakalyaka
Yes, even 5 liters is a bit too much for us, there are only three of us, I burn fresh every day, and the 6-liter one fought, which would look like a refrigerator (I did not see either this or that alive).
Andreevna
No, for nothing you. A liter in height is quite a bit. But non-stick casters are practically free. Well, you understand it yourself))) Personally, it is more convenient for me to cook in a 6-liter ham in a teskome and I plan to make preparations for the winter, there 0.7 jars are well worth it. And so, of course, everyone's choice. It's just that you will definitely have to order non-stick, and this is already about 2 thousand rubles.
Elena Tim
Quote: Byaka zakalyaka
The 6-liter was afraid that it would look like a refrigerator (I did not see either this or this live).
Marin, the six-liter is only 2.5 cm higher than the five-liter. In all other respects they are finally the same.
Leonidovna
Girls, and I had a HORROR HORRIBLE !!! I put the whole beets on vegetables to cook for 0.7 11 minutes, (I put a double boiler, poured 400 ml of water) and went into another room to read HP, after a while I smelled the smell of burnt beets. Has come running, in the kitchen a stench, Shteba shows that another 4 minutes before the end of the program. , I was at a loss did not know what to do, but waited for the end of the program. and still waited for the pressure to drop, opened it - and there all the Black water boiled away more kapets! Then she calmed down, poured a bowl of warm water, spilled soda, drank a little limoncella and when her hands stopped shaking, she went to scrub the dishes. I wiped off the carbon deposits with soda.
But where did the water from the bowl go? : girl-q: and how much should you pour for steaming? , girls, who knows, help.
marinastom
The valve, I suppose, did not turn, the water all and boiled away ...

Shl. When you go online, remember that the pan starts frying right after it finishes cooking!

Leonidovna
marinastom, The valve has been closed. I immediately checked it when I jumped up to her, and there were still 4 minutes before the end of the program.
Jiri
Leonidovna, then the pressure did not build up when the valve was closed, the water boiled away through the small valve. My saucepan has this often now, I take off the lid again, just in case I fix all the rubber bands, and due to the fact that the water is already boiling with might and main, the lid seems to suck on when it is closed again, and the pressure builds up. As long as the pressure icon is not displayed on the scoreboard, I will not go anywhere
Margo31
Girls!!! As for the lid to the stem, I wanted to buy at the maximum comfort, but it comes without an O-ring and a steam release valve. Who bought something? Was it the same for you?
Masinen
Yulia, yes, it should be so, the valve is on another cover., and the rings can be bought separately.
Irlarsen
Leonidovna Why did you wait another 4 minutes ??? And then they waited for the pressure release ??? The program had to be immediately turned off and the valve turned carefully. In general, I always bleed steam myself, right after the end of the program, as the squeaking irritates (oh, I let it go, annoyed Shteba broke down and the hope for a fix melts and melts with every passing week ...).
Irlarsen
And yes, girls and who are not lazy. Heck, please, the black valve, the one that turns. How much does he weigh? And now I have a problem with the pressure in another cartoon, I sin that the shut-off valve is simply too light, steam comes out of it under high pressure ...
Byaka zakalyaka
Andreevna, Elena Tim, girls so I gave a blunder to try to re-order for a big one ???
Or be content with the usual. I plan to buy a coated saucepan only if friendship does not work out completely with stainless steel, I have two Panasonic for baking, but in general I would like to try to move away from Teflon pots. Something like this.
Taki sho? Change order?
Admin
Quote: Irlarsen
The program had to be immediately turned off and the valve turned carefully.In general, I always let off steam myself, right after the end of the program,

This can also cause valve breakage, permanent forced pressure interruption. He already dangles freely on the stem.
And then, during the forced descent, under a strong jet of steam inside the pan, strong swirls begin, the food boils violently, which affects the transparency of soups and the quality of food. As long as food is under pressure, this does not happen.
gala10
Quote: Admin
This can also cause valve breakage, permanent forced pressure interruption. He already dangles freely on the stem.
Tatyana, Thank you! I have had this suspicion for a long time. For 1.5 years of using Steba, I forcibly released the pressure only a couple of times, and even then not immediately after the end of the program.
Quote: Admin
under a strong jet of steam inside the pan, strong turbulence begins
And this is also very important. Forced release of pressure can clog the valve.
Loksa
Marina, if there is another cartoon for baking, well, frying, etc., you are satisfied with 5 liters, then why do you need to change ?! I don't see the point. You will have all the options, I only need tefal for baking, but I have one cartoon!
I agree with Tanyusha, too. Why play off often, it's better to calculate the cooking time!
gala10
Quote: Loksa
only for baking tefal is needed
And for frying?
Andreevna
Byaka zakalyaka,
Marina, I would re-order. I also have two Panasiks available, but I bake more there now. From experience, the time will come anyway and you want a non-stick one. Meat in a piece, to fry the cells, to quickly bungle the thighs - this is in an anti-stick. By the way, I really like the cutlets and thighs in it. Lenochka-Tim has these fried thighs somewhere, I do that too - Thing! By the way, in Panasika both thighs and cutlets are completely different. Delicious but different.
Irlarsen
All valves, with the exception of the electric ones on Borks and Cooks, hang freely, this is just a protection in case of overheating, so that the valve will shrink and not blow up the cartoon. And the breakdown of this valve is an insignificant problem, why should it break then? Here my power board burned out, and at least henna for the valve.
Yes, and the quality of the final product in cartoons with electric valves, which themselves release the pressure, completely relieves me, in the same place, there is basically no way to wait, the steam is forced down at the end of the program.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers