Multi-cooker-pressure cooker-slow cooker Steba DD2 / DD2 XL

By default, 10 minutes. I don't forcibly release the pressure, only the code will drop to below 100, otherwise everything will be in a mess ...

Girls, I have a problem. Porridge began to burn in a Teflon saucepan. Probably came kirdyk my bowl. Which is the best Teflon or ceramic?

[Lena]

Lena, and how much cup do you use?

[Nataliya]

Nataliya, Year 2. But I have a child, in the morning he puts porridge with an ordinary spoon. Therefore, probably, and kirdyknula bowl.

In ceramics, it will also stick in six months.
I'm not my cup in the PMM.
By the way, I noticed that if you often fry something that does not cover the whole bottom, then the dried oil film remains and is difficult to wash. Can also cause sticking.

[Lena]

Lena, in general Teflon behaves well. Maybe you should buy the second one?

[Marina]

if you often fry something that does not cover the entire bottom, then the dried oil film remains and is difficult to wash.

Marina, I soak for about 20 minutes in warm water and detergent. Everything is perfectly washed.

Devoks, I don’t receive notifications from the forum, so I just can’t understand where they write what
So I apologize if I didn't have time to answer))
Fortunately, the girls are ready to answer and help!

Spicy soup of lentils, pumpkin and celery in the Steba DD2 slow cooker (Gala)

In ceramics, it will also stick in six months.

I have been cooking porridge in ceramics every day for a month, the bowl darkened around the perimeter and began to stick. It is washed, however, while it is good and when it stands, everything goes away. But I baked and fried in ceramics, maybe this was the reason. Now I ordered a Teflon bowl.

[afnsvjul]

afnsvjul,
Julia, languor + 98 degrees, 1: 6 (thicker-1: 5) 35-40 minutes. I first pour water, then cereals and finally milk. Salt, sugar, butter, to taste. All.
If I'm in a hurry, then I do like Marina.

I rarely cook porridge, but it cooks wonderfully in stainless steel.

but in a stainless steel it cooks wonderfully.

And how it is fried. Maybe buy another stainless steel bowl. One will not be enough.

[Lena]

Lena, well, it's hard to fry a chicken with a skin in a stainless steel, because the skin will stick.
And you can eat meat and chicken fillet. The main thing is to adapt)

I fry a lot. We'll have to buy Teflon.

And I can easily fry any meat in stainless steel, incl. chicken with skin. You just need to follow 3 rules: 1) warm up the bowl well (that is, not before it squeaks about readiness) and the oil should be warmed up (!); 2) the meat must be dried (with paper towels); 3) do not rush to turn over to the other side (when the meat is normally fried, it easily lags behind the bowl).
Follow these rules and you will be happy!

[Arka]

Arka, Nata, I also do not stick!

And my Shteba began to give out strange things by the end of the first year of life. Yesterday I cooked potatoes in their uniforms twice. Both times the lid was closed, but the first time it was 70 degrees at the end of cooking and raw potatoes. I put it on again immediately. The lid closed and at the end it was 105 degrees.
Today the meat was cooked according to the same scenario. Only both times at the end of the temperature it was 86 degrees. The first time the meat was warm, but tough. The second time - I don't know, because the pressure has not been released yet.
I just took a photo.

On December 9, I handed over my Headquarters to Yulmart for repair. Today I received an SMS message that the seller will return the money to me. My device was found to be defective.

[Kate]

Kate, yeah, they held her for a long time. Well, the main thing is that the issue has been resolved.

My darling arrived. The first impression is extremely positive, I like everything - the quality of the materials is excellent, the controls are simple, compact due to the shape. I decided not to postpone the test until tomorrow. I cut the raw peeled beets left over from lunch into quarters, chose vegetables 25 min 0.7. Waiting for results

[r_kat]

r_kat, Katya, congratulations !!!
and go and read this topic for newbies by Stebe
Basics of use, questions and cooking times in the Steba DD1, DD2 pressure cooker

In general, since yesterday, sous vid fell ill. The funny thing is, the Hotter machine has been lying idle for 2 years already. She snatched her out of greed for a stock for 500 rubles, I thought to whom to attach everything. It's her hour, I plan to cook a turkey.

[r_kat]

r_kat, Katya, congratulations !!!

Thank you!

For a long time and dreary, I chose a multicooker-pressure cooker, I shoveled so much information! At first I wanted induction, but in the end the agony of choice stood between Steba DD2 and Ourrson 5015. I think I'll buy Shtebochka after all.
Girls, and who saw next to these 5 and 6 liter Shteba multicooker-pressure cookers. Visually, the size is very different (after reading the topic, I realized that they are the same in width, only different in height)? I can't decide which one is better to take, the difference between them is only 500 rubles.

Natalia, here

Julia, thank you very much! Outwardly, there seems to be a very small difference, only 2-3 centimeters higher. I'll take 6 liters then, more, not less))
Yesterday I read Temka about the choice of multicooker and saw your message, where you chose between the same models as me: induction Tefal, Ourson and Shteba. I see that the choice also fell on Shteba

[Margo31]

Margo31, Yulia, have you ever compared in operation? They wrote here that there should not be a tangible difference due to the higher power of the XL, but you never know ...
Are you happy with your purchase? Or haven't you had time to cook something in this saucepan yet?

[4udo]

4udo, Natasha I have 5 liters and 6 liters. there is practically no difference. but still more often I use 6-liter for cooking. But I fry in a 5-liter one.

[Margo31]

Margo31, these are my cherries
Girls, you will not regret it, the stem is very good
The best part is that the lid almost does not get dirty, does not write when opening, and you can wash the lid in PMM (without fanaticism, of course, I rarely wash it, after pilaf, for example)

[Katya1234]

Katya1234, wow, how lucky you are that the staff began to be naughty by the end of the first year, and not at the beginning of the second.

[Margo31]

Margo31, Yulia, have you ever compared in operation? They wrote here that there should not be a tangible difference due to the higher power of the XL, but you never know ...
Are you happy with your purchase? Or haven't you had time to cook something in this saucepan yet?

Oh, Natalya, if you've read the forum before, you saw what problem came to me. I sent her to ozone. And then it rushed, I had a 6L bowl with an extra bowl, but on the site they did not have an extra 6L bowl and they offered me a 5L bowl and a bowl for it, or it is not known how long to wait. I agreed, they sent me 5 liters with an extra bowl, I have not received it yet. And the next day they got a 6L bowl. In general, I was upset

[Margo31]

Margo31, these are my cherries
Girls, you will not regret it, the stem is very good
The best part is that the lid almost does not get dirty, does not write when opening, and you can also wash the lid in PMM (without fanaticism, of course, I rarely wash it, after pilaf, for example)

Here you have to duplicate your girls, which were exhibited several pages earlier

Girls help me with advice, the valve in my stem does not rise anymore. I thought the rings were to blame, I put new ones, but the valve still does not rise. I disassembled it a couple of times and washed it, maybe I did something wrong, in the end I lift it manually. What can you think of? I won't carry it for repairs because of the valve, d: girl_red: and I won't even give the shtebik for a couple of days

[Sikorka]

Sikorka, and the rubber bands are all in place?
Your float is clogged or something is interfering with it, so it does not rise.

[Kate]

Kate, yeah, they held her for a long time. Well, the main thing is that the issue has been resolved.

Yes, for a long time. But the result was reported no later than promised.

hawk,
Yeah, lucky, but the money has not yet been returned.

My staff and during the warranty year sometimes made "tricks".For example, I will put meat or chicken soup to cook and go for a walk with the children for two hours. We return from a walk, and the meat is hot, but raw. This did not happen often, so I did not pay attention. By the end of the first year, systematic problems with the temperature sensor began. Pay attention to these things.

I can't decide which one is better to take, the difference between them is only 500 rubles.

By the way, Natalya, you miscalculated the difference. Now ozone has done very cleverly. If you take a staff for 6 liters, its cost is 8490 rubles. And if you add an AS5 teflon bowl to the basket to the 6L shtab, then it immediately comes with a multicooker for 8490 rubles
Total multicooker 6l with a bowl turns out 8490 rubles
We look that with 5 liters - the price is 8095 rubles. But you will still take an extra bowl of Teflon for baking + 1565 rubles. Total 9660 rubles.
Conclusion - 5 liters more expensive for 1170 rubles
So girls !!! Who is going to take, take now and do not hesitate. In February, its price will be 11,000 rubles. In other stores, the cost already reaches 12,000

[Margo31]

Margo31, Yulechka, I read about your adventures, but I did not understand how, in the end, you had two Shtebochki despite the fact that you have not yet received yours))
Ahh .. Got it)) the photo is probably not yours.

Here is an ambush, and yesterday I made out both the multicooker and the bowl, and I didn’t get such a price. But I haven’t paid or received it yet. I will now try to snatch for 8490 with a bowl. And then I have almost 10 tr comes out.
And now something Ozone lay down ... Apparently, after your message

[Natalia]

Natalia, I don’t know, now everything is added. You choose a Steba as5 bowl - it says nothing about a set with a multicooker. And when you make out, she, along with the multicooker, will appear in the basket for 8490

Good evening! I am now yours too. I received my XL on January 20. Emotions are only positive. Thanks for helping (forced by praise buy Steba DD2 / DD2 XL (the husband was also impressed with the speed and quality of cooking, although he was skeptical - there are several cartoons at home). Thanks again

And now, on Cyber ​​Monday, ozone gives 300 rubles in bonuses. In total, it will cost you 8190 rubles

You choose a Steba as5 bowl - it says nothing about a set with a multicooker. And when you make out, she, along with the multicooker, will appear in the basket for 8490

Said. Look, it says on the Shteba page that this is a set of two products.
🔗

[Margo31]

Margo31, Ozone does not give me anything with bonuses, what word should I enter?

[Masinen]

Masinen,
The rubber bands are in place, the float and all the details are mine.

[Sikorka]

Sikorka, Which city are you from? Indicate in your profile.
You obviously have something with a lid, not a slow cooker.

Said. Look, it says on the Shteba page that this is a set of two products.
🔗

Elena, only now everything has been corrected ... Probably, at that moment the site was just introducing a promotion. The meaning is to muddy the water

It seems to me that the lid should be unscrewed and cleaned. Or wash in the dishwasher.
The main thing is that then there are no unnecessary tokens

And I climbed a pan on Ozone to look, so the price for it is 8.5 tysh
With a slow cooker in the appendage :)

[Margo31]

Margo31, Ozone does not give me anything with bonuses, what word should I enter?

Here, Cyber ​​Monday offers several partners and a discount of 300 rubles. Choose ozone and the code that you will be given enter 🔗

[Masinen]

Masinen, Moscow. Yes, the lid seems to fit loosely and crookedly, on one side there is a larger gap (on the left).

[Sikorka]

Sikorka, it's not a gap, but something inside the lid is preventing the float from rising. We must take it apart.

[Sikorka]

Sikorka, it's not a gap, but something inside the lid is preventing the float from rising. We must take it apart.

Mash, what is this float? I'm completely dark What should you watch out for? I have a black thing on the lid. which rotates on pressure and a hole. Which one is a float and how should it rise? Explain please