SvetaI
musyanya, Loksa, Mila1, Masinen, Linadoc, thanks for responding. In general, a lot is not enough, I will take 6 liters, especially since the useful volume is less.
Quote: Loksa
two cutlets and broccoli for a couple of inflorescences
not my size.
Is this non-stick bowl sold? Something I did not see on the site.
gala10
Svetlana, Steba AS 5 non-stick teflon coated bowl
AS 5 for DD2 XL teflon kr1,690.00 on the site 🔗
SvetaI
gala10, Thank you. I'll go and drive with a sting.
Lenat
Hello. I do not know where to write about the bowl to the staff. I bought a bowl for the 6051 brand from the QDI arch, and sent it to another DSB model.
it is white and fits perfectly with a 5 liter stemMulti-cooker-pressure cooker-slow cooker Steba DD2 / DD2 XL
Naty777
They brought me Shteba XL today. But here the fork turned out to be. Tell me, will another cord with similar connectors (for example, from a computer) fit? I really don't want to take the device back because of this plug (our family liked it right away)?
Masinen
Naty777, will do.
Naty777
Hurrah! spaps
Mila1
And my cord does not fit tightly into the Shtebochka, it falls out constantly. I don’t know what to do. I tried to push harder.
Masinen
Ludmila, and you do not push the steel against the wall so that the wire does not bend.
Mila1
Masinen, Mash, and I have it not pushed to the wall. The wire was twisted and I plug it loosely into the socket. So it lies very freely on the table
Katya1234
Mila1,
Lyudmila, and when there was a new one, did the wire hold well in the connector? You can try to replace it with another one. But, if it staggers, then contact the service
Mila1
Quote: Katya1234

Mila1,
Lyudmila, and when there was a new one, did the wire hold well in the connector? You can try to replace it with another one. But, if it staggers, then contact the service
Katya, I've only had her for 10 days. Initially like that. We have no service. I ordered it on the Internet. I have a feeling that he does not stick to the end. I push him hard, but I'm more afraid
Larssevsk
Luda, for a start, try another cord and determine what is the matter - in the cord or in the connector
Katya1234
Mila1,
Then rather call the store until 2 weeks have passed from the date of purchase
Mila1
Quote: Larssevsk

Luda, for a start, try another cord and determine what is the matter - in the cord or in the connector
Laris, there is no other cord. There is nothing to try
Quote: Katya1234

Mila1,
Then rather call the store until 2 weeks have passed from the date of purchase
I’ll think something now.
Masinen
Ludmilaif everything works fine, then don't even worry about the cord.
The main thing is to check before turning on and that's it)
Mila1
Quote: Masinen

Ludmilaif everything works fine then don't even worry about the cord.
The main thing is to check before turning on and that's it)
So the fact of the matter, Mashenka, is that in the process of work, the cord went off a couple of times and the cartoon turned off, and I saw it later (in full confidence that she was cooking), the cord left a little.
gala10
Ludmila, Look closely at the cord and socket. Maybe some kind of speck got there?
Larssevsk
Quote: Mila1

Laris, there is no other cord. There is nothing to try

Lyuda, check all power cords from all appliances at home, right down to the computer and printer. Surely some will do. They are usually all the same
Mila1
Quote: gala10

Ludmila, Look closely at the cord and socket. Maybe some kind of speck got there?
Glachka, thanks! I checked there are no specks
Quote: Larssevsk

Lyuda, check all power cords from all appliances at home, right down to the computer and printer. Surely some will do. They are usually all the same
My husband will come home from work, I'll ask you to find what cords are there, I'll try to check. Now I tried to stick it harder, the back wall of Shteba bends inward, I'm afraid of something more. It seemed to be stuck in more tightly, but I tried to gently touch it with my hand and it fell off again
Katya1234
Mila1,
I would change such a staff. Let the husband look again, if it does not work out with another cord, it is worth changing the device.
Mila1
Katya1234, Katyusha, thank you. we will watch in the evening.
Olgushechka81
I have a small Redmond 02 multicar at home, sometimes I confuse the cords, the stem works from it.
Mila1
Olgushechka81, Olga. and I have one cartoon. Other kitchen appliances have built-in cords. This is all hope for her husband. When he comes home from work he can find some cord from old computers.
Chardonnay
Mila1, I bought a separate cord like this: 🔗 ... I recommend - a good thing!
Mila1
Quote: Chardonnay
🔗
Ritochka, thank you very much for the tip. Did you also have such a problem or did you just buy it so that you do not pull it out of the socket every time? And it's also written for Redmond. Will he come to Stebe?
Chardonnay
Mila1, Luda, I, pah-pah, had no problems. It was inconvenient for me to pull the plug from the outlet every time (since there is no shutdown button on the Shteba). And the outlets themselves seemed to be enough to leave the plug in the outlet. And the girls here, at the Bread Maker, told me about this cord! It is versatile and fits Shtebe too. Theoretically, you can look at something similar in the computer. stores, but I did not look.
Bijou
Mila1, here it is. And if it's not the cord? By the way, you can ask around from neighbors for experiments. Otherwise, buy a new one, and the point will not be in it, but in the socket on the case. Well, where to change the cartoon if the terms of the exchange come out? By the way, why was it not checked for sticking-out at once? Or received by mail?

Elena Tim, my joy, I can’t accomplish my goal - I specially fried potatoes twice for Meat-0.7. The cartoon didn't even make a sound, because it didn't get to the start of the program because of the open lid.
Fried well, by the way.
Elena Tim
Wow! Thank you, Lenus! Now I will also try on meat. Then I will compare the result and report back.
shlyk_81
And my blood pressure stopped gaining. At the end of cooking, what's on the soup, what's on the meat, the temperature is 95-96 degrees. In this case, the lid was unlocked only after 45 minutes at a temperature of 73 degrees. On the scoreboard, the pressure jumps out 0.7, but everything is very quiet, it used to hiss, everything whistled. What should I do? Maybe that where to spin-twist?
Linadoc
Quote: shlyk_81
Maybe something where to untwist, twist?
Yeah, under the lid there is 1 nut and next to a mesh filter (under it is also a nut). Carefully remove everything, rinse, clean the holes at the float and turn everything well until it stops.
Masinen
Evgeniya, if the lid is blocked, then there is pressure.
It's just that the temperature is low.
Roza_Irina
Girls, tell me, please! I want to cook wheat porridge in water for a side dish. Revised all recipes, only dairy ones. I remember in the subject someone kind of cooked this, I can't find it.
Linadoc
Quote: Roza_Irina
boil wheat porridge in water for a side dish.
Ira, I did bulgur 1: 2 with water on "porridge" for 0.7 10 minutes, when it was unblocked I added salt and fried onion with olive oil. Then more dried tomatoes of their own with herbs.
Katya1234
Mila1,
Lyudmila, have you checked the connector? What did you decide to do with the staff?
Bijou,
Lena, can you tell us more about frying potatoes in Meat 0.7 mode?

Mila1
Quote: Katya1234
Lyudmila, have you checked the connector? What did you decide to do with the staff?
In short, my husband came from work .. they did not find such wires, they gave it to someone as unnecessary. I walked around a lot and decided to try again. I stuck it harder (the back wall was springy) and entered. Now dear TTT stands
Roza_Irina
Quote: Linadoc

Ira, I did bulgur 1: 2 with water on "porridge" for 0.7 10 minutes, when it was unblocked I added salt and fried onion with olive oil. Then more dried tomatoes of their own with herbs.
Thank you! : Friends: Will the wheat run through the valve? She foams very much. Bulgur looks more like rice.
gala10
Quote: Mila1
I stuck it harder (the back wall was springy) and entered.
And the chest just opened ...
Ludmila, I am very glad that the situation has settled down, mmm ... Let your pan only please you now!
Linadoc
Quote: Roza_Irina
She foams very much.
Rinse the groats several times, then nothing foams. In addition, wheat is better from durum wheat (it used to be called Artek).
Mila1
gala10, Checkmark, thanks !!!
Bijou
Katya1234, but what is there in more detail.) We turn on any mode from 0.7 (it turned out without a difference that porridge, that meat), pour oil, as we visually understand that it has warmed up (but before the countdown is turned on) - we throw the potatoes and not cover with a lid. In 90%, everything will be quietly fried, and the program will not turn on, but sometimes it turns on (moreover, the countdown then goes on, and the pressure indicator then goes out, then lights up). In general, there is no difference in frying, but not squeaking. How it was prepared - turn it off.

But this is only for those cases when we do not need the program to shutdown itself after some time, and we independently control the process.

Quote: Roza_Irina
I remember in the subject someone kind of cooked this, I can't find it.
I wrote in the first topic.) I remember easily: Porridge-0.7 - 7 minutes. But this is if you do not bleed off the steam, but let it unlock yourself (I always do this). If you play off, then 10 minutes are needed.
Roza_Irina
Lena, thank you very much for your help! And the ratio is 1: 2?
Natali S
Girls, is it normal that dark spots appeared on the bottom of the stainless steel bowl after a week? Or is it a marriage?
Masinen
Natalia, you just need to clean the bowl.
These stains are superficial. Me too, that is, then no)
Natali S
Thank you, and what to wash? Feri doesn't wash
aigul75
I also have dark spots appeared, as if the surface had peeled off a little (maybe it is). What I have tried to wash is useless, so I cook. New spots no longer appear.
Natali S
Ok, thanks, so it's okay
Biryusa
Quote: Natali S
and what to wash? Feri doesn't wash
Quote: aigul75
Than just didn’t try to wash it, it’s useless
Try rubbing with dry mustard or baking soda. If it does not help, then the comet will be cleaned off with powder for sure. Do not be afraid that the bowl will lose its "specularity" - but it will become more "non-stick".
Masinen
And there is a special tool for steel. It is not expensive and wipes well pots and everything made of steel)
gala10
Girls, ah about the pop from the Giraffe have not heard? Brings EVERYTHING !!! in perfect condition.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers