Dough sheeters-noodle cutters (model selection, features, reviews)

[Stasya23]

Stasya23, there are a lot of videos on YouTube, personally I am quite happy with the handle

with a motor it is easier.

Buy with motor and handle in one set ..

The motor is not a necessity, but only an addition. And with one handle, everything works out fine. Even non-video Italians say that the handle can be rolled out even faster. While the toad strangles me to pay for the motor, the cost is more than the machine itself. Now, if the children give a motor, I will not refuse. In the meantime, I like to turn the handle - nothing makes noise, you can watch TV in parallel, or in the evening, when everyone is already asleep. So the pen has its advantages.

Peace be with you bakers!

At first, we thought of buying it without a motor, but now we seem to have played enough and roll mostly sheets under lasagne, dumplings, khanum and so on, but occasionally we will cut thin noodles for soup and twist it with a handle
Of course, someone can every day, but three times a day a motor is needed

Not everyone has a place to screw

You have been using your machines for many years)) Tell me how to use a dough sheeter with a motor and a handle?))

Of course, no one will decide for you, but for this you need to read the topic in order to understand the nuances.
I have only one iron argument for you:
- as far as I know, not a single person who bought a car with a motor - then in his right mind did not give up the motor,
- and here many of those who bought with a handle - then, with common sense, bought a motor, and for some reason, for some amazing reason, they did not return back to the handle !!!
Earnestly?

Of course, no one will decide for you, but for this you need to read the topic in order to understand the nuances.
I have only one iron argument for you:
- as far as I know, not a single person who bought a car with a motor - then in his right mind did not give up the motor,
- and here many of those who bought with a handle - then, with common sense, bought a motor, and for some reason, for some surprising reason, they did not return back to the handle !!!
Earnestly?

I confirm 100% !!!!!!!
I have both!

Peace be with you bakers!

Still not convincing
The presence of cash encourages the purchase of priblud and body kits, and the one who bought it, of course, will not refuse in favor of the handle, the money has been paid - the motor should pay off

So the poor, tired people are sitting in their kitchens and spinning these pasta that no one needs, they have grown old, amusing themselves with the only thought that the purchase is justified

I used to ride a bike !!!
It was so good !!!
A child on a trunk, a granddaughter on a frame! ...
Rain in your face! ... Hair is developing !!! ...
Happiness!!!!!!
And now I bought a car ...
I drive it and suffer ...
but where to go ... the money has been paid ...

And now I bought a car ...
I drive it and suffer ...
but where to go ... the money has been paid ...

Peace be with you bakers!
Here is a good example.
Immediately how many minuses - and health is not improved and the ecology is violated, but on gasoline and parking
This money would be on the right track - let's also buy jump ropes on the bike, or even swing at the halahup

And five bags over my shoulder and walk to the dacha !!!!
And from there on the hump a bag of potatoes and go home !!!
Just how much health will be added !!!!
The muscle will grow !!!
Better yet, jump in your hands and jump with these bags !!!!

So the poor, tired people are sitting in their kitchens
Immediately how many disadvantages - and health is not improved and the ecology is violated

Tired - it's with a handle!
I am burning with curiosity to see how much health will increase if you use that kind of 500 kilometers with a peskodral over rough terrain!

The thickness switch tires me more than the handle

The thickness switch tires me more than the handle

What is it like? I don't notice at all ... Right on the move I change with one left. What is there to change something?

And five bags over my shoulder and walk to the dacha !!!!
And from there on the hump a bag of potatoes and go home !!!
Just how much health will be added !!!!
The muscle will grow !!!
Better yet, jump in your hands and jump with these bags !!!!

People!!! Finish !!! I was already falling from the chair with laughter! And, most importantly, everything is straight to the point !!!

Peace be with you bakers!

At the dacha, you need to rest and not spud potatoes

And about the motor from all of the above - there is an extra penny, take it without hesitation
And if you’re strained, then don’t worry, you won’t get tired of twisting the handle once a week, and if you also tighten your husband’s, and connect the children, it will be fun and harmony in the family and jokes.

and those who have a motor, let them sit alone and listen to the noise of the motor instead of the native voices of the household

Happy Birthday Anatoly! I agree with you 100+. Moreover, this is not a meat grinder, where the handle is much more difficult to turn. In the dough rolling machine, the efforts are minimal and I don't even know how much it needs to be twisted to get tired. After all, the rolling process takes a minimum of time. And with regards to switching one left lever of the rolling thickness, in Marcato you can use one hand, but in the Empire you cannot switch with one hand. This should also be taken into account when choosing a model.

And with regards to switching one left lever of the rolling thickness, in Marcato you can use one hand, but in the Empire you cannot switch with one hand. This should also be taken into account when choosing a model.

Oh, thanks, I didn't know. I didn't think about it, I decided that it was just inconvenient to pull and twist from myself if the car was bolted sideways. It's good that I bought Atlas.

Good evening!
You can and I will insert my 5 cents about the need for a dough sheeter with a motor. First, you need to decide how often you will use rolling and for what volumes. And secondly, how much are you willing to spend on this thing. I'll tell you about myself. I bought rolls for making dumplings and dumplings, which I cook in a small amount no more than 2-3 times a year. I did not plan to play with noodles (for 3 years the desire did not arise). Based on this, I bought an Empire without a motor and noodle attachments. It makes no sense to buy a motor, however, like nozzles ...

Thank you all for your advice !!!
I don't want to deal with pasta yet)) So really, using a dough sheeter 2-3 times a year, it's stupid to spend 12t r
I am glad that the width of the rolled sheet in the machine is 26 ... and this is just what you need for dumplings, dumplings and pasties .. no one has this miracle? How to use?
Max Gran pasta 26!

Max Gran pasta 26!

If I'm not mistaken, at the beginning of the topic there was a review on it (not very much. As a result, the person bought the atlas)

I can't imagine how you can cope with such a width of the dough with one hand.

I, too, have an argument in favor of the motor not tired / tired of scrolling the knob, but that both hands are free for manipulation. I do not really know how to manage one. Probably because it was always controlled by two)). I also have Kitchen, the roll-out is attached high and under it there are places in bulk to hold / intercept a long tape. I bought myself a wide roll of Akita (I don't think I remember myself anymore))). Also with a motor. I don't like such a motor yet - it squeals, puffs, this is not Kitchen for you. But I didn't even consider such a width of rolling under a mechanical handle. How to deal there with one hand ??

[Scarecrow]

Scarecrowand what is the width?

[Miranda]

Miranda,

Here you forced me to go to watch))). 260mm. Most likely they are one and the same, but under different names. I have it under the "brand" Akita.And the engine is the same (I thought for a long time between Markatovsky and Akitovsky, took the Akita engine. I don't like it yet)). But I've only used it a couple of times so far - I can't form an opinion. And then more - I tried, but did not use. There have been no complaints about the unit itself (rolls, their work, etc.). We must try it in a human way, then I can say ...

[Scarecrow]

Scarecrow, Thank you
Me after my simple 18cm. the standard 15 seems like a puppet. Although it would seem only 3cm. But just as I do not see different companies or attachments in a store, my hand does not even rise to consider them.

I want with a motor and from 18cm.
26cm. - absolutely gigantic!

It seems to me that 20cm. - the most high would be. But purely theoretically, of course.

[Miranda]

Miranda,

Well, 26 cm is really healthy and so far I haven't got a lot of buzz from her)). In my opinion, all the same garbage and discarded money. The engine is much deadlier than on the whole huge semi-professional planetary planetary Kitchen, so it works somehow strainedly despite the fact that the dough layer is much larger!

[Scarecrow]

Scarecrow, it is difficult to imagine 26cm. and how to manage such a layer.

[Miranda]

Miranda,

Well, you understand that with a roll width of 26 cm, there will definitely not be a sheet at 26 - it will be smaller. The gap for work should still remain and the working width will be smaller - this is the case on almost any rolling. Rarely when it is possible to fit clearly even in 140mm from side to side.

Rarely when it is possible to fit clearly even in 140mm from side to side.

I ride the Atlas without any problems with the handle, on the contrary it turns out wider and presses the edges.
Of course 26cm I want to see how they roll, something I can't believe that you can roll such a sheet on a dumpling maker

I bought myself a wide roll of Akita (I don't think I remember myself anymore))). Also with a motor. I don't like such a motor yet - it squeals, puffs, this is not Kitchen for you.

The engine is much deadlier than on the whole huge semi-professional planetary planetary Kitchen

Whoa! I also bought an atlas with a motor and returned it after 6 months. Included 2 times at most. The motor, or rather its power and noise from it ... Mine, as they heard it once, then refused the dumplings.

Therefore, I took the dough rolling machine to the kitchen.

And in the Crimea this summer I saw how they ride on a wide roll. There it was just about 25cm. And manual rolling. We bought these pasties there. They are made to order and there is a queue. While they were standing - I watched the cook roll out. She first with a rolling pin, and then into rolling (she did not change the thickness on the rolling, maybe she can only roll one thickness). And passed it through the rolling a couple of times. Then I cut out a circle on a plate.

No one has an extra pen for the Atlas 150? I wanted to ride by hand with a child - I can't find
Ready to buy.

Good day. I'm also in thought. I ordered a mechanical Atlas 150 (while I’m waiting for an SMS about sending), and I’m looking at the one with the motor.

[Marpl]

Marpl, Marina, thank you. We have to think, the pen will cost 490 + 400 delivery.
Moreover, I have a motor that is, I wanted it for a child, and I can't find where I put it (((

What does it mean? I also cannot find one thing.

Read here:
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=181396.0

[Scarecrow]

Scarecrow, Nata, thanks, for sure, I completely forgot! We must present it urgently!

Peace be with you bakers!

Nata-

I think well with a motor

I'm talking about the practicality of buying, well, in the sense that money is not limited \ in reasonable aisles of course \ what not to buy, and how often to use it is not the last thing when calculating a purchase

This is how the people have already shared about doubts about acquiring raviolnitsi, but we rarely even use dumplings, for business or as a khanum or a rose, and for steam in a slow cooker - many times faster

I also have Kitchen, the roll-out is attached high and under it there are places in bulk to hold / intercept a long tape.

Please tell me the kitchen model ..also began to think that it is easier to have everything in one than all separately))

Something my brain began to break from choice and information ...
Tell me, are there additional attachments for the Atlas only for 150 or are they also bought for the Marcato Atlas 180?

[Anastasia]

Anastasia, Atlas 180 has no attachments ...
Maybe they exist somewhere hypothetically ...
But I didn't find them ...
Therefore, I took Marcato Ampia by 180! ...

There are only two models for Kitchen.
Professional - where the bowl rises with a lever ...
And the usual ... where the head rises, what would put the bowl.
And that has a million colors !!!!

[Svetlana]

Svetlana, Thank you! I'll go now to Ampia and take a closer look ...))

And what is the ravioli nozzle suitable for? Completely confused .....
It seems to have figured it out .. such a nozzle is only for 150 ...

[Stasya23]

Stasya23,

Kitchen attachment, as far as I remember, fits any model. The main thing is to decide on the mixer model. And they all have the same principle of work. I have a 4.6L bowl.

[Scarecrow]

Scarecrow, Thank you))

[Stasya23]

Stasya23, oh, I myself lick the raviolnitsu. So I think it's better to take - a ravioli tablet or a Markat's attachment? but for 180 they have no attachments, in my opinion. I came across a store where in the descriptions they also have pictures of noodles. straight drool flowed.

[Ellie_sun]

Ellie_sun, I also already broke my whole brain (((as in a joke: both smart and beautiful)) I think how to combine desires and reality ...

Hello!
I was puzzled by the question whether this motor is suitable for the PASTA DI CASA QM dough sheeters for Atlas 150?
Maybe there is someone who can tell? The price is too attractive for him.

[svet_lana]

svet_lana, judging by the picture - the Atlas should not be suitable ...
The motor to the Atlas has not one pin (as in the picture), but three.
The big one is simply inserted, and the other two go into the grooves ... then the motor turns a little and snaps, thanks to these two pins ...

And I again ordered on Amazon, Atlas 150th to my friend and two drying racks, without them it is impossible to cut the noodles. It turned out 9250 rubles