SSvetik
Alena-Korochka has such a set. I have to ask her. https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=389332.0
Vinokurova
auntyirisha, Do not be scared!. I’ll go see the saoyu, they brought me today .. I just wandered with her all over Moscow, she pulled my hands away, I didn’t move them ...
I'll take a look

I also have this ... my lord, how did you manage to remove them, huh?

something tells me, there is no need to take them off ..... and now I found a picture, how to take them off ... I'll go to the interpreter .... let him tell
auntyirisha
AlenKa, and I also ran the whole day (I was looking for test strips and syringes for the cat, he is a diabetic), I ran into work and worked. But now I'm making lean dumplings from Romin dough. Look, we have the same sets like
Vinokurova
Irina, Ir, stop !. I'll go translate ...
it seems like it is written what to remove when cleaning, and then back in place in reverse order ...

look, there is bamazh in six languages ​​with three pictures, how to shoot this garbage ... I think they help the dough not to wind further, but to get away from the rolls ...
Vinokurova
Quote: auntyirisha
nozzles rumble?
Nothing rattles ... put in place ... and make dumplings ... and roll noodles from the leftovers ... on smooth rollers, you see, there are no such combs !.
it means that you will roll the dumplings, the leftovers on the noodles, then take off the combs, clean them and put them in place ... everything will be in the best possible way !. the rolls should stand tightly to each other ..
good luck, paws!
Creamy
I also think that manufacturers would not have fastened such a complexly perforated plastic counter bar just for transportation under each shaft. And the passport specifies a method for removing pieces of dried dough to clean the rollers.
auntyirisha
AlenKa,: friends: I will. But now I am a specialist in filming entih pieces Thank you girls
Vinokurova
Alevtina,Irina, .
Vinokurova
SSvetik, look, instead of our plastic stuff, you have a metal rod on each pair of rolls ... we definitely don't have this ...
I am still inclined to believe that our combs take out the dough from the grooves ...
well, I think Irinka will write tomorrow ... and we will all sigh ...
auntyirisha
Well, I have a problem again: wide noodles are cut well, but thin noodles are cut in pairs, that is, only every two noodles are separated, and between two undivided noodles there is only a "lane", but they are not split
Creamy
auntyirishaso that there is no "steam", the dough needs to be a little steeper, and the existing dough should be generously rolled in flour. before inserting into the slicing rolls.
auntyirisha
Alevtina, Thanks, went to try
auntyirisha
Alevtina, Hooray, it worked!!! Thank you!!!
Creamy
auntyirisha, you are well done! We have already curbed the noodle cutter!
auntyirisha

Quote: Creamy
We have already curbed the noodle cutter!
Well something like that
Vinokurova
auntyirisha, Irinkaaaa you did it !. good fellow ... so happy for you !. I'll go around my tomorrow!

now I will sleep well ..

auntyirisha
AlenKa, thank you I am like a miller today, all in the agony of Success tomorrow (do not forget to "clean" it with a simple test)
auntyirisha
Special thanks to Admin for the wonderful choux lean dough
Seven-year plan
Irina, auntyirisha, late noticed your message!
She also ran and looked at her! I have Marcato Ampia.
Exactly the same white inserts!
They clean the grooves during operation!
How else did you manage to remove them!
It's good that everything was resolved!
Good luck with your development !!!
And before you cut the layers into noodles, let the dough dry a little!
Then the dough is cut perfectly !!!
Vinokurova
Quote: Seven-year
managed to take them off!
That is the question!. I also racked my head ... Svetul, it says what to take them off for cleaning .. as it turned out, they can be removed easily: press harder where the thread is and move it .. pull out the metal rod and insert it into the hole on the plastic comb ... clean it with a brush .. .return in reverse order ...
but since you don't take it out, then you can clean it without removing it?
auntyirisha
AlenKa, it seems to me that they can only get clogged from an unsuccessful soft dough. I did this to clean the machine and it got a little stuck, I had to take off the "combs" again.
Seven-year plan
AlenKa, Thank you!
Now I will know how to take it off!
It's just that nothing has ever been hammered, so there was no need!
But, you never know what happens in life! It may also come in handy!
Vinokurova
Svetlan, look:
Quote: auntyirisha
can only clog from unsuccessful soft dough
I also tested mine yesterday ... and nothing got hammered .. I think Irishka is right, only the sticky dough clogs up .. and you have the same story ... I think if Irinka hadn't conducted such an experiment to remove I wouldn't have had enough intelligence and time for that ... but she just took it off !. And then as I wrote ... and away we go !.
Now we are savvy !.

auntyirisha
Charm
Well, here I am to you for advice! you have a hundred pages here - I can't master it ...

In short, the mother-in-law asked for such a toy to roll the dough into dumplings and make homemade noodles ... what would you advise?)
Omela
Alyona, almost all the basic information on existing models is given in the first two posts, and the choice is of course yours.
Vinokurova
: Sorry: Can I boast here too? Super puffs with cherries from Mistletochka

Dough sheeters-noodle cutters (model selection, features, reviews)

Ksyusha, thanks !. you are smart!

Yulia Antipova
Quote: Vinokurova
Super puffs with cherries from Mistletochka
Vinokurova, AlenKa, and a link to the recipe is possible? And then drooling ...
Vinokurova
Yulia, Yul, I don’t know how to make an active one .. but will it pass?

https://Mcooker-enn.tomathouse.com/in...334.0

Irina F
Girls, just from the Metro. There is a Titania Empire for 2999r and a huge red box Imperia for 8399r, it includes the rolling dough itself, a noodle cutter, a ravioli device, two wooden scoops and some other fennel in the form of a roller, I think to cut the dough exactly for raviolecade.
Maybe the information is not needed. But I thought, suddenly someone doesn't know and someone needs it)
Bast1nda
Irina F, I bought such a set for a share for 3999, they periodically have shares of unheard-of generosity. The set is good, I like working for them.
Irina F
Natalia, well, it turns out it can be cheaper!
To be honest, I don’t know today's prices, I just wrote it just in case!)
July-Lu
Hello! I want to buy myself a Vincent noodle cutter. Can anyone have one? How does it work for you? Is it worth buying? Or watch something else? And do you have a ravioli attachment for her? Sorry for so many questions ... Agony of choice. Thank you in advance
Volume
Girls! Who's got Marcato! On Atlas-150, do you start skating from 0 or from 1? If with 1, then what is 0 for. The point is that I started skating from 0, and she knocks. Is this normal or am I having problems?
Vinokurova
Volume, I skated to 0 yesterday, nothing knocked or rattled ...
shlyk_81
I also ride from 0, nothing rattles.
Volume
Thank you girls for the answers.
In the instructions, the subtracted starts from 1. And at 0, even when it is idle (no test), something hits me on something.
Now I think it's a problem with the mechanics or with the motor? It is unlikely, of course, with a motor, on the rest it works fine. And what could be with the pieces of iron inside? And then what needs to be changed? Can grease with oil and where?
Vinokurova
Volume, shaking ?. probably, if it touches something, it should not only knock ... there should be some movement ...
you can also try to twist the handles at zero .. will it knock too? ..
Volume
Yes, already twisted. It knocks anyway. On the left side, where the thickness switch is, vibrates and is even visually noticeable. If you put your hand down, you feel the movement.
Vinokurova
look carefully, maybe you didn’t exactly set it to zero?in the same place it is necessary to delay, rotate and insert ... I wrote stupidly, but it should be clear ?.
and if it knocks with the handle too, then, I think, it's not the motor that matters
try to see what is happening from below ... remove the motor, insert the handle, turn it upside down and twirl the handle
auntyirisha
And I did not twist at zero, I'll go and take a look. No, it does not knock, it works the same as on other numbers.
Vinokurova
Irina, you even brought me into a trance state on Friday ... I tug at these sticks and can't take them off ... so more questions swarm in my head, which wouldn't have been if you hadn't been scared and shouted at the whole forum !. but, Irk, I skipped you on the number "0" ... I rolled puff pastry for Mistletoe puffs ... I promised a little one for the translation ... (by the way, it's all thanks to you)
Volume
Checked for 0 with a handle. Jams, just jams, without a motor. And on 9 it squints and fringes on one side. 9 This I noticed earlier) And what to do? ...
Or maybe my sticks are sticking too?
Volume
Nooo. The sticks are in place.
auntyirisha
AlenKa, Volume, and you accidentally disassembled it for cleaning? Maybe not so collected? I just managed to make it out clean (according to the instructions).
Vinokurova
Quote: Toma
sticks stick?
what sticks ?. about Irishkin stress ?. then it is necessary to remove and put it back ... maybe one roller is crooked ...
most likely needs to be treated or changed
Vinokurova
Quote: auntyirisha
I just managed to make out a clean one (according to the instructions).

I still cannot recover from the shock


Vinokurova
Volume, I'm at work, I can't help anything yet ... I can only shake my own in the evening ... listen ...
auntyirisha
AlenKa,

All recipes

New recipe

© Mcooker: Best Recipes.

map of site

We advise you to read:

Selection and operation of bread makers