Val79
Quote: kВipoint

Something I did not understand, he cut out every star, they did not fall out? Nafig, nafig, I would not suffer so much ... Have a shape, and then cut out of it.
Depends on skill. Then I began to roll it out with great pressure, it fell out better, but somewhere you still need to cut it. Apparently the rolling pin is not very even and does not press to the end everywhere. And if you shift the filling a little, then it squeezes out.
Masinen
kVipoint, these are the forms that come with the Empire.
If I were in their place, I would make cloves and then the dough would cut through.
Gefu also has such forms, but with teeth.
kat-rin-ka
Val79, great stars turned out, I really wanted such a shape
Val79
Quote: kat-rin-ka

Val79, great stars turned out, I really wanted such a shape

Thank you! I have a set of three shapes: hearts with ribbed edges, stars and fish. And a mini rolling pin was given.
For some reason, fish come out worst of all, and hearts and stars are better.
Anna1957
Virgo, enlighten me: I took out my typewriter, it's called Titania, I bought it for a long time at the Metro at a discount, I use it very rarely. There are no motors for her?
Elena Tim
Anh, so Titania is a model of the Empire. And to her, essno, and motors e!
Well, unless someone came up with their own Titania regardless of the Empire brand ...
Anna1957
Quote: Elena Tim

Anh, so Titania is a model of the Empire. And to her, yes, and motors e!
Well, unless someone came up with their own Titania regardless of the Empire brand ...

Why am I asking: I found a motor for the atlas on Amazon, but not for Titania. Poke who saw, plz. Or at least the name is accurate.
bukabuza
Anna1957The Imperia Pasta Facile electric motor is suitable for Titania
Anna1957
Quote: bukabuza

Anna1957The Imperia Pasta Facile electric motor is suitable for Titania
, THX
bukabuza
Anna1957, look here again 🔗
I took the Pasta Factory from their sister, everything is good quality and in St. Petersburg they also have a pick-up point.
Anna1957
Quote: bukabuza

Anna1957, look here again 🔗
I took the Pasta Factory from their sister, everything is good quality and in St. Petersburg they also have a pick-up point.

Here is the cheapest

I already ordered
Larik-Chizhik
Masinen, Maria, and you will not throw a reference to the analogue of the Markatovsky motor? And then I was going to buy GASTRORAG QM, but you write again - that it often breaks ...
Masinen
Larik-Chizhik, Laris, you type in the search engine Gastorag and it will give you who has them.
I did not save the link, because I was told that he was bad.
Larik-Chizhik
Quote: Masinen

Larik-Chizhik, Laris, you type in the search engine Gastorag and it will give you who has them.
I didn’t save the link, because I was told that it was bad.
Thank you Maria. But I've been using this one for a long time trying to find reviews about Gastrorag and only cost and availability pops up. Well - I will have to continue to torture you and I can be happy!
polisher
DivnaDid you manage to buy a noodle cutter? I'm the same from Krasnoyarsk. I found nothing in the shops in the city.
Masinen
Larik-Chizhik, in one store, they told me that they had stopped buying gastrorag motors altogether, because they were all returning, they go crazy, but they are cheap.
Marcato motors are suitable for Gastorag machines, but they are expensive.
And there is also an analogue of marcato, but also not cheap)
Marina22
Girls, please stick your nose at me. Can't find a recipe for dumplings dough in a few seconds in a knife processor. From Vera in my opinion. I was sure that the recipe was in my bookmarks, but it turns out not
Yulia Antipova
Marina22
it, thanks
Larik-Chizhik
Quote: Masinen

Larik-Chizhik, in one store, they told me that they had stopped buying gastrorag motors altogether, because they were all returning, they go crazy, but they are cheap.
Marcato motors are suitable for Gastorag machines, but they are expensive.
And there is also an analogue of marcato, but also not cheap)
Maria. I bought a set of Marcato Pasta Set 150. Now I'm looking for a motor - that's the whole dilemma. But I have not found anything about the analogue of the Markatovsky motor. Maybe our crazy handles can adapt the motor from IMPERIA PASTA FACILE to Atlas. I wonder if someone tried to compare plugs and mounts?
Lettera
Quote: Lettera
I ordered it last night while I'm waiting
Quote: Lettera
Now I'm tracking.
Urrya, she came today. There is a QR code on the face of the face, the link leads to YouTube, to the video with the dough roll. Made in July 2014. I ordered a system of vacuum caps to her company. The pump comes with 2 included.

🔗
🔗
🔗


I did not order the attachments, because I want others. I sit and think, maybe in vain I didn't take drying right away
Packaged well outside. and inside the box was pierced from 2 sides, but inside it seems everything is in order. Eh, if they would still sell Delicia
Zima, HopeThanks again for sending us in the right direction

p. from. figured out why the dents on the box. Inside the noodle cutter is not rigidly fixed, apparently, the parcel was thrown, and it slightly pushed the box with its corners. Paper cuts)))) I will try on the test later.
Masinen
Lettera, Lena, congratulations on a great purchase! And there is drying on ozone, and very good.
Katris
Lettera, Congratulations! Glad that everything went well!
Slavutchanka
Hostess girls! Tell me which noodle cutter to take so as not to be very expensive and to buy a spaghetti attachment for it. If there are none, then which budget reliable one would you recommend?




And who used this?

🔗
filirina
Specifically, I didn't use this one, but my sister recently bought herself a noodle cutter of this type from inexpensive ones - horror !!!!! It is made in such a way that you will forever be discouraged from using it! The rollers are regulated through Zh ..., some sharp self-tapping screws stick out at the bottom, in general it is not worth saving, it is better to save up money and buy a normal one - Italian.
I had a Slovak one, I did not use it very often, but over time, the 1st roller began to wedge. The husband disassembled, said that there is nothing to wedge, but wedges and creaks like a door.
I didn’t become a gossamer and bought myself an Atlas 18cm, though only a roll for 1000 UAH. and now I'm not overjoyed, sometimes I can't stop myself so I want to ride it again and again.
So my advice is not to get fooled by cheap G ...!
kVipoint
Have Masinen some kind of inexpensive and she is very pleased with it, even Atlas she did not really like. I have an Atlas 150, I am satisfied, but there was no other one, so there is simply nothing to compare with
Masinen
I have Pasta-Maker, copy of the ampia)
Slavutchanka
Girls, thanks!
Masinen, and which brand? Can I put the spaghetti attachment on it?
Masinen
Slavutchanka, there are no nozzles on it, and they are not there for her. Firm Pasta Maker)
Omela
At OZONE, dryers for 419 rubles, who have not yet acquired 🔗

Dough sheeters-noodle cutters (model selection, features, reviews)
Admin

Until they reach the basket .... the price will rise
Musenovna
Quote: Omela

At OZONE dryers for 419 rubles, who have not yet acquired 🔗

Dough sheeters-noodle cutters (model selection, features, reviews)
I get it on time! I have long wanted to finally decided.
Omela
Well, their programmers sleep at night.

Here's another raviolnitsa 209 rubles. 🔗

Dough sheeters-noodle cutters (model selection, features, reviews)

So I think, nat it to me ??
Admin
Quote: Omela

Well, their programmers sleep at night.

So I think, nat it to me ??

Schaassssss! The price has just increased for the items in the basket, and I threw them away

Ksyusha, it’s not worth buying, she doesn’t roll raviolki well, there is a lot of marriage. I threw mine away, only I felt sorry for the money, I used very little
Omela
Tanya, this is really a decective !!!

I understood about raviolnitsa, cross it out! Chot sucked me in OZONE .. I found the jars for spices so cool. I have to set sail for me.
Anna1957
Quote: Omela
I found jars for spices so cool

Show me, huh?
Elena Tim
Aaaaaaa! Do not show!
I don't need, I don't need, I don't need ...
Lyusichka
SlavutchankaLook at Malva Lily in Procurement. I took the Empire from her, albeit not the most budgetary option, but I'm happy. And you can buy attachments for it, and you can take it with a motor.
filirina
Quote: Lusichka
Slavutchanka, Look at Malva Lily in purchases. I took the Empire from her, albeit not the most budgetary option, but I'm happy.
I took my Atlas 18cm. in the online store Photos. Prices do not differ from purchase prices + delivery from this topic, just wait for a short time 1-2 days and after receiving the goods, you can inspect them and if something does not come up to hand over within 14 days with a refund and no questions asked - this is the store's policy. And the one who came from Italy for the purchase in the subject cannot be returned if it does not fit.
(I'm not a store representative, it's just that he is next to me and I often buy there.)
Slavutchanka
Girls, thanks! I ordered Kaiserhoff KH-901. The son went to Kiev today, at the same time he will take her
Omela
Quote: Anna1957
Show me, huh?

Girls,
Quote: Elena Tim
To me We don't need to me We don't need to me We don't need ...

🔗

Elena Tim
Are you choooooo ?! Wait, why did you show it aaaaa?

I ordered it! And all because of you!
I'll beat you someday, I'll just beat you! Oooh, my grave sins ...

Lettera
Maria, Kate, Thank you!!! I barely managed to get it before leaving)))
Well, again, I didn't buy a dryer (((
okay, maybe there will be discounts on NG again ...
Juventa
Good evening! Girls, I'm eyeing the Kaiserhoff 901 noodle cutter, I'm thinking whether I need it or not. I need it not so much for noodles as for rolling out the dough (I don't like rolling with a rolling pin). A question arose - can you make puff pastry on it? - I am specifying about this dough, because I definitely won't do it with a rolling pin, but I would do it on a dough sheeter.
Katris
Tell me, how thick are we rolling the dough for dumplings on the Atlas?
kirch
I ride a 5 or 6
Franky
Usually at 6, for the dough on curdled milk it seemed to me that 5 is better.
Yulia Antipova
Girls, I'm eyeing GEFU 🔗 Now the price for it has risen, my requirements for it too)))

In its characteristics, the thickness of the rolling is written from 0.6 mm. And on Atlases and Empires, the minimum salary is 0.2 - 0.3 mm. Tell me (for a person who has never rolled dough on noodles on his own) - 0.6 mm is enough for me or just watch only an Italian car at once ???
Larik-Chizhik
Quote: Yulia Antipova

Girls, I'm eyeing GEFU 🔗 Now the price for it has risen, my requirements for it too)))

In its characteristics, the thickness of the rolling is written from 0.6 mm. And on Atlases and Empires, the minimum salary is 0.2 - 0.3 mm. Tell me (for a person who has never rolled dough on noodles on his own) - 0.6 mm is enough for me or just watch only an Italian car at once ???
I felt GEFU in our Maxidom - I didn't like it. Some kind of flimsy. After probing, I ordered the Marcato Pasta Set 150 Gift Set in the online store - I'm happy as a boa constrictor! Do not compare in quality to GEFU.
Take a look at their website - you might like it (delivery is fast, well packed).
Omela
Quote: Yulia Antipova
In its characteristics, the thickness of the rolling is written from 0.6 mm.
Yulia, it's a bit thick of course.

Quote: Yulia Antipova
or just watch only Italian car ???
If you don’t want to pay twice (like me), then it’s better to buy a decent Italian car right away.

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers