KitchenAid Mixer

[Svetlenki]

Svetlenki, Light, I had to take a picture and put it out here, so that I would not be impressed too and stop getting upset that there is no action for us

[Natasha]

Natasha, there is a photo of them on the website of the action. They are not even impressive from the photo. Well, and the forms - it is quite possible for this money to buy forms without any shares. And without that race of stacking stickers.

I'm looking for a solution)
How will it turn out - unsubscribe
There were two burned resistors on my board, but this did not solve the problem
The mixer refuses to work at low

[e1win]

e1winHow I sympathize with you!
And I still have the same adventures
I really hope that you will succeed and the problem will be solved! Be sure to write here how your process is progressing. I think this is important not only to me.



I don’t even understand, what kind of mixers are they so new? !!! A company with such a name and a product from the premium segment drives such bullshit ... How do these mixers go through quality control at the factory?
The part does not work here, the resistors there burned out. It's just darkness.
I took offense at them

[caprice23]

caprice23, Natasha, write to the Kitchen representative. Describe the whole problem. A company with a name. Maybe something will decide in your favor.

Pomnitsa, we are from the auto forum, dashed off a petition about problems with Toyota, new ones. As much as the most important thing on the site. The machine was replaced with a new one.

[caprice23]

caprice23, Natasha, write to the Kitchen representative. Describe the whole problem. A company with a name. Maybe something will decide in your favor.

Pomnitsa, we are from the auto forum, dashed off a petition about problems with Toyota, new ones. As much as the most important thing on the site. The machine was replaced with a new one.

These guys are more modest
For all complaints they write - call, all warranty cases by phone, sorry
What if I'm deaf?
Answered - find someone who is not deaf, let him call

[e1win]

find someone who is not deaf let him call

I live in the middle of nowhere, no phone. Bears don't talk ...

e1win, is this a response from the head office? And who signed this? Who is the hero?

Answered - find someone who is not deaf, let him call

It's funny that you really want to cry

[e1win]

I live in the wilderness, no phone. Bears don't talk ...

e1win, is this a response from the head office? And who signed this? Who is the hero?

I will say more - this is the headline in the usa) and in the live chat, and in instagram and in the letter to the kitchenette - everywhere, apologize, bat yu must call
And in the Russian Federation, realizing that some of them are taken from the USA, they simply unsubscribe in two words
I described the problem, said that the guarantee had passed, what could be the salt and where to go, what I got
"Look in the warranty services"))) More details: https://Mcooker-enn.tomathouse.com/in....new;topicseen#quickreply

caprice23, Natasha, write to the Kitchen representative

I don't even know the language. And the warranty does not apply to my kitchen. They will say go to fig.

FSE, I went into depression. The weather is just right. Pours like a bucket all day. I will sit on the windowsill wrapped in a blanket in an embrace with defective kitschen. Watching the rain and drinking cocoa. Well, as all modern glamorous ladies do.

No, fig cocoa, I'd rather drink cognac!

I don't even know the language. And the warranty does not apply to my kitchen. They will say go to fig.

That's it, I went into depression. The weather is just right. Pours like a bucket all day. I will sit on the windowsill wrapped in a blanket in an embrace with defective kitschen. Watching the rain and drinking cocoa. Well, as all modern glamorous ladies do.

No, fig cocoa, I'd rather drink cognac!

Modern posts sad stories with deep quotes against the background of the sea)

Modern posts sad stories with deep quotes against the background of the sea)

Well, damn it, I'm not modern at all and not a lady. And there is no sea under my window.
And there is cognac. And if you drink a lot, then sad stories will immediately compose and the sea outside the window will begin to appear ...

Well, damn it, I'm not modern at all and not a lady. And the sea under my window is not.
And there is cognac. And if you drink a lot, then sad stories will immediately compose and the sea outside the window will begin to appear ...

Well, damn it, I'm not modern at all and not a lady. And the sea under my window is not.
And there is cognac. And if you drink a lot, then sad stories will immediately compose and the sea outside the window will begin to appear ...

Cognac clearly works better than stories

PS and better than kitchen

Cognac clearly works better than stories

PS and better than kitchen

Exactly

[caprice23]

this is the leading one in the USA

eh .... crushed

caprice23, do not be depressed. Konyakusik helps to keep warm.

[caprice23]

caprice23, Natasha, I had an idea: what if next week I quietly, not by phone, but directly to the service, go and talk about this topic about speed, the opinion of the experts of the masters is interesting. I suggest here Natasha write to you the questions that you yourself would like to ask the master, and I will rewrite them on paper and ask. I don't know if the mood will improve or not, it's too early to take offense at Kitchen, there are still chances of salvation!

[caprice23]

caprice23, Natasha, I had an idea: what if next week I quietly, not by phone, but directly to the service, go and talk about this topic about speed, the opinion of the experts of the masters is interesting. I suggest here Natasha write to you the questions that you yourself would like to ask the master, and I will rewrite them on paper and ask. I don't know if the mood will improve or not, it's too early to take offense at Kitchen, there are still chances of salvation!

At this stage, I have only one question - why go out of order there ???
I replaced the faulty elements on the scarf, there is nothing more to break there
The engine is working, all the elements are working, what could be faulty, that the motor refuses to run less than 150 rpm?

[e1win]

e1win, I'll write it down well and ask if Natasha may have another reason, let him remember all the subtleties of the pritenzii and write here, I gather up questions later - and then on a trip to the kitchen master.

[Sofita]

Sofita, thanks a lot for the offer. I would be very grateful if I could get out to the service and ask them all.
Since I have not changed any details yet, let them just tell you what the matter might be, that speeds 1, 2 and 4 are the same - 150 rpm. I tried to adjust the screws, absolutely nothing comes out.
It would be great if they described the algorithm of actions.




And he is also very interested in what they will answer the question e1win... If you have already changed everything on the board and it did not help, then what could be the problem? What are the next steps to take?
In the end, there must be some solution to the problem.
P.S. Probably at e1win everything is more correctly formulated in the question. I do not understand a fig about this.



May I also ask you how to properly adjust the screws? Maybe I'm doing something wrong and have my own nuances? Although unlikely ...

[caprice23]

caprice23, I will get ready and crawl quietly, but I was able to crawl to get the parts for the trolley and on the same day I repaired all the carts (the 50r part and the wheel were well fixed, and the men to whom they spoke said throw it out and buy a new one)
The most important thing is to formulate the questions correctly, because as you ask, they will answer. Nothing else can be added to something, you need to think.

Anyway, I'll probably spit and send the mixer back while I can.
Today, the third rolled up to two options
The first option was pay. 90% of problems with speed control are faulty or burnt board elements (most often the diode q2 on the circuit and the triac q1. In my case, the resistors burned out)
The second option, if the elements, or the board were completely replaced, and with the speed, the speed control panel is still nonsense (black garbage to which all the terminals are connected with a T-shaped copper piece in the center. Rumor has it that there may be a mechanical break or something else in this board, with different operating options, it opens two contacts / closes both, closes one, thereby changing the voltage supplied to the motor 40/80/120 volts.
The third option, which was voiced to me today on the Anglo-Saxon site of the whirlpool parts (and the kitchen has spare parts, if not the Chinese boards, then the whirlpool) - worm gear, it is WPW10112253, if we are talking about the five-liter version of artisan

The owners of these miracle mixers were not in the immediate environment to check the work of their own with deliberately correct work speed panel, and it’s hard to believe that in many respects suspicious ladies will let them poke around in their pre-existing working machine) and wait for the arrival of spare parts from the USA, or buy for horse money in the Russian Federation, in the hope that it will work - there is no time

After seeing how to change this gear, I realized that I don't want to mess with this mixer anymore, and while there is an opportunity, I will send it back

Caprice, and I advise you to change - the same faulty elements, or the whole board and hope that in your case, just a diode for 6 rubles is not working, or a triac for 40

P / s if there are enthusiasts who are more confused than me, or who only use different kinds of whipping and everything above the second speed, I can suggest a mixer, until the end of the next week it is in Moscow time

I'll try again to replace the diode and send it home

[caprice23]

caprice23, oh, Natasha, only your questions remain, but I'll still go to the service in order to have an answer and find out the reason.
Today it is snowing and raining all day long and + 1 *, in such weather I can't go outside, I'll wait when it's drier, and I'll go.

I ordered a new board and a copper contraption w10325124 and w10119326, as they arrive, I will replace it, maybe it will help - I will unsubscribe

[Sofita]

Sofita, did not see why that message.
If you can't go, then figs with him. Why strain yourself on purpose. And if you suddenly pass by, then you can look in, ask. e1win, here, in principle, I chewed everything up in sufficient detail. But suddenly the service will tell you something else

e1win, did you send back the mixer all the same?
And which Store did you order the details?

[caprice23]

caprice23Yesterday I went out on other issues, I managed everywhere, but got caught in a drizzling rain, (getting wet in the rain in the cold in my situation is not very desirable). As the weather will be dry, I will definitely arrive - the opinion of experts is very interesting, having previously talked with them by phone. And there is also a showroom store in Moscow. Here, with specialists / consultants, you can also find out the solution to the problem.

[e1win]

e1win, here, in principle, I chewed everything up in sufficient detail. But suddenly the service will tell you something else

e1win, did you send back the mixer all the same?
And which Store did you order the details?

I hope to have time to check the details and, in which case, send the mixer back
Bought on ereplacementparts.com

I finally bought myself a float and a flexi-attachment. And also a vibrating sieve with built-in scales. And here the bread is baked, the biscuit too. And try the horror as you want ..

[nata4a]

nata4a, Natasha, congratulations on your new clothes! Then tell us how they are in business, especially with a sieve with weights, it is interesting to know.

[caprice23]

caprice23, certainly. Only to me on you.

I tried a vibrating sieve. Very handy for biscuits. The flour pours out quietly, and I stir it with a spatula. Instead of two operations, weighing and sieving, one. The volume of the bowl with flour is small, for pies and bread, one weighing will not be enough. For biscuits, it's just super convenient.

[Natasha]

Natasha, it's great that a toy came to the yard! And I kept looking at him, looking, but I did not decide whether I needed or not)

Yes, the price was very good, $ 38. In addition, the scales can be used separately, not complete with a sieve.

Hello everyone.
In general, in my case, the details in the form of a phase control panel and a speed switching board did not solve the problem, I sent the mixer back, alas
A sad story and a few months of wasted time until the money is returned

[e1win]

e1win, I really sympathize with you
... Now my dad is doing magic over the mixer. Soldered the semistor and demister. Or whatever they are. I sort of adjusted the speeds. On the first, the second turns normally, but the sound ... It feels like the gears are rubbing against each other and the sound is so uneven ... Something's wrong ... Damn, one frustration



Maybe someone can send me a video with sound how the mixer works at all speeds? Write a personal, throw off the number. On whatsapp.

[e1win]

e1win, I really sympathize with you
... Now my dad is doing magic over the mixer. Soldered the semistor and demister. Or whatever they are. I sort of adjusted the speeds. On the first, the second turns normally, but the sound ...It feels like the gears are rubbing against each other and the sound is so uneven ... What is wrong ... Damn, one frustration



Maybe someone can send me a video with sound how the mixer works at all speeds? Write a personal, throw off the number. On whatsapp.

Maybe the top bolts were overtightened? Is the spring tightly compressed? Perhaps you overtightened the bolts, thereby crushing the rotating part that presses on the speed board

Hello.
There is a KitchenAid Artisan planetary mixer. I worked well for several years. And just recently, when reclining, I began to seize. Well, that is. to fold it up, you need to make a fairly significant effort.
Tell me, did anyone come across the same problem and how can it be solved?



All. Understood. I popped the WD40 into the hinge and everything worked as before.

I sort of adjusted the speeds. On the first, the second turns normally, but the sound ... It feels like the gears are rubbing against each other

I have the same at first speed. If you make it bigger with bolts, the sound becomes normal, you lower the speed to 15 revolutions - a rattle.

I have the same at first speed. If you make it bigger with bolts, the sound becomes normal, you lower the speed to 15 revolutions - a rattle.

And how did he initially work for you? Also on the first or second quickly twisted?



I took the mixer from my dad. The most he could do was adjust the first, second, fourth and sixth. They work as they should. But on the first second, the grinding of gears and a very uneven sound of work. But now the last three speeds are the same: the eighth and tenth are the same as the sixth. I don’t know how it was better, whether it was how it was, or now. The maximum of the sixth speed for whipping is not enough? ...
All frustrated, even now reluctant to use the mixer. Standing and I do not approach him. So it's a shame, for that kind of money and a defective unit. My husband says to me, when you need to whip something at high speeds, use a hand mixer. Aha, I answer him, and when small turns are needed, you can simply stir with a hand whisk. And why do I need a planetary mixer?
I'll try to record a video of how it works in the evening.

And how did he initially work for you? Also on the first or second quickly twisted?

Yes, initially the first was almost one and a half times faster, but with a normal sound. After adjusting, it seems that all the speeds are as they should be, only at the first the sound confuses. I wanted to compare it with my friend's mixer - it turned out that her first speed was also too fast.

[Venx]

Venxthat they often have such jambs
How "too fast"? Initially, my first second and fourth were the same. Everything is like a fourth.

How much "too fast"

Also about one and a half times faster than necessary.

[Venx]

Venx, tell me, is it possible to roll back? That the first speeds would be fast again?

Venx, tell me, is it possible to roll back? That the first speeds would be fast again?

Yes, the bolts are well adjustable.

[Venx]

Venx, Thank you. And then all in thought, return as it was or leave it like that

[caprice23]

caprice23, I understand, I'm rushing myself, which option to choose - faster and without an annoying sound, or still a slow first speed ...

[Venx]

Venx, tell me, do you have the "slow version", the last, fastest speeds, just like mine, do they twist the same way or do they differ in speed?

All speeds are different.

All speeds are different.

Eh, if I had it, I might not be upset. And in my slow varant, the last three speeds are the same, and in the fast one - the first three



I’m still thinking, is this "grinding" harmful to the mixer? After all, something is rubbing against something there and maybe, as a result, the wear of parts will be faster?

I wish I knew what the sound should be at first speed ...

[Venx]

Venx, our forum member sent me a video of the mixer with sound (thank you very much). So, the sound is absolutely even, without grinding. The same as before adjustment, only quieter, because.the speed is lower.



How do I insert a video here? I want to show how my miracle works now.