Electric smokehouse-pressure cooker Brand 6060

Are there such? Could you write the exact title for your search?

I can only in Russian "silicone slippers for a smokehouse"

I can only in Russian "silicone slippers for a smokehouse"

"Ali" found a suitable product. Just right for a smokehouse.

Cool slippers :-)
It is unclear how their iPhone holds it THROUGH the screen or what? From the collective farm :-)

Once again, I remind you of FOOD silicone!
otherwise it will melt! The boiler gets very hot and plain silicone may not be T.

[dopleta]

Guys, I'm writing again - did you get these silicone legs? Soon I have been living without them for three years! Not a single scratch! What - does your bookcase travel around the pan? No, isn't it? And where does the scratch come from?

dopleta, I also have not used them for a long time (lost). No scratches... I use the bowl with the pin exclusively for smoking. For everything else, I have a spare bowl.

this is a resort option!

[CheBuRashGO]

CheBuRashGO,
Thank you!
I have a circle cut from a silicone mat (I bake pizza in AG on it like on a substrate). So there is an idea to put it in a pot, and there is already a pot inside.
Let's see what happens.

There are also molds for muffins.

Yesterday I smoked turkey fillet ... Tasty!

[But I have a problem: my smoke today began to shock me with electricity]

The other day my wife passed ..., oh, she lost two legs at once - she learned something new about herself in life.
Made all three from a silicone spatula (10 min. Work with beer). Add. the shovel was purchased in the "All 38" store. Schaz, by the way, are being tested along with a bite of marinas. pork (hot smoked). Later I will post a photo (legs). It is done very simply.
But I have a problem: my smoke today began to shock me with electricity, and this is not static, but natural 220. But so far it is not clear that this does not always happen (I tried it), but a couple of times it was enough for me - I cheered up so much, I scattered all the chips on the floor :-))
And one more thing: I read above the epics of my fellow countryman about the forced plugging of the valve - but it's a good idea for, for example, a cold. smoking (tomorrow you will just have to try the already pickled bacon). Here, too, the question is solved simply: you rest the head of the bolt (screw) against the valve, and unscrew the already screwed nut until it rests against the protective bar - the valve is completely closed. (if I am honored, then I'll throw this photo)

Maybe you can make wine cork legs? Cut it into small cubes. In my opinion, they will hold up well.

But I have a problem: my smoke today began to shock me with electricity

Countryman, they actually break down, only on the way.
This is why I chose Unit because of its 2 year warranty.
If the warranty is gone, then feel free to disassemble them, they are arranged just like an electric stove.
there the cord goes from the power supply. YOU WOULD SEE its insulation !! (We are a Unit already drunk managed to disassemble)
In short, the main cable insulation has a short to the body. And he is steel :-(
Either drag it to the guarantors, or disassemble it yourself :-)

Here, too, the issue is solved simply: you rest the head of the bolt (screw) against the valve, and unscrew the already screwed nut until it rests against the protective bar - the valve is completely closed

I thought for a long time.
I have a valve (the main one is not the one that is emergency-pressure relief by hands) is arranged simply.
In the silicone bed - there is a SHPUNTIK.
Steam presses from below - the tongue up and presses the head against the same silicone gasket.
Forced - I pull it up with tongs and the steam does not go away, it gathers quickly and that's it - the tongue head is pressed down with steam an hour earlier than necessary.
IMHO if the pressure in the tank is supercritical, then this whole structure, together with the silicone ring, will simply vomit out in an instant. That's all there is to it.
What is where to twist - I can not understand.
The only automatic solution is to initially pull out the "tongue" from above and fix it.
For this, I plan to use a regular rubber band.
In the last stages (before lowering the tongue-and-groove plug) in the open position (when everything is off and there is a NATURAL pressure release), I clearly hear a leak poisonous substances gas steam through the side gasket :-(
I will probably pour boiling water over her now, before the start of the processes.
At high pressure in STEAM mode the gasket does NOT poison!

In general, the unit is arranged (inside it is very simple), the main thing is VERY carefully and surgically gently remove the seal / sticker securing the two halves of the steel case. If you need a guarantee.
And then glue this seal back just as gently.
If a guarantee is not needed, then there are no problems.
We spent half an hour removing the seal.
Before parsing.

[CheBuRashGO]

you rest the head of the bolt (screw) against the valve, and unscrew the already screwed nut until it rests against the protective bar - the valve is completely closed

This experiment failed (I omit the details). But the silicone legs (35 min. Hot smoking) without any visible changes (and it is clear - what will they be).
CheBuRashGO, so as not to breed a flood on the forum, I will try to be brief. The first thought was: the phase isolator is shorting to ground, the second: one of the air conditioners has broken through. Koptya was bought in January of this year (a year guarantee) in Yulmart, and there were no problems with them under the guarantee, well, at least from me (I have been buying from them for a long time on the second column). The only thing is to lazily drag this device, because the arms do not grow from where the legs are. In the evening I will open the patient.
Let's transfer such conversations to a personal for the future, because the main contingent of the forum is still lovely women, and they, as you yourself understand, read all this our crap about electrical statics, etc., definitely, without interest ...
Once again, my apologies for the flooding on the forum. (and I'll post the photos of the legs later - there just isn't time)

the main contingent of the forum is still lovely women, and they, as you yourself understand, read all this our crap about electrics-statics, etc., definitely, without interest.

I cannot vouch for everyone, but I am very interested, and most importantly - useful!

Let's transfer such conversations to the future in a personal, because the main contingent of the forum is still lovely women, and they, as you yourself understand, read all this our crap about static electricity, etc., definitely, without interest ...

Color ...
Girls also have to repair their devices, and some have husbands who are familiar with an electrician, write better in the subject, God forbid, it will come in handy ...

Oh how !!! And the women on our forum, it turns out, are not only cute, but also inquisitive

also curious

And then! Moreover, not only curious ones, but we can also disassemble / fix / assemble we will be able to. Only you don't give us out to anyone, we'd better just be cute, yeah

[CheBuRashGO]

CheBuRashGO
Opened the patient: no visible insulation violations were found. Just in case, I went through the tester - "0". And it is understandable: if the "beat" to the ground constantly, then one could walk along the chain and find a place, but it beats impulsively.
"For now" I bought yellow rubber gloves (in which the floors are washed)
Later I will take it to Yula for repair. Once it starts to pierce, it will still burn.
full size 🔗

[Photos were taken outdoors and away from the kindergarten! In a place specially equipped for smoking!]

Well, the promised photos of the legs.
full size 🔗

full size 🔗

full size 🔗

full size 🔗

full size 🔗

full size 🔗

The hole was made with a drill ⌀2.47 mm.
Shovel - shop "All 38" (yes they are everywhere, different configurations).
Photos were taken outdoors and away from the kindergarten! In a place specially equipped for smoking!

Hehe, well, the question about the delivery of the repair was decided by itself. The ten-pin worked. On the trail. I'll carry it for a week (in the marinator there are two more pieces of pigs waiting to be extinguished) under warranty, let them repair it.

The interior of the Unit is "one in one" the color of the opelet and that one matches.
Conclusion: done EXACTLY at the same plant :-)
But Unit has a two-year warranty!
Well, it's like: They can if they want? (wildly laughing)
I think when a superUnit thread comes to the market, they can write three, but the plant will be the same.

On the rod:

Smoker stick failure is a very common problem.
I heard about it from "competent sources"
or the heating element is on, or the wire burns out.
They generally have only two breakdowns, that is (we carefully look at Yulmart-non-kondishka /strong hint/) Either their ten-stick burns out or the ten-pad burns out.
Sovets: If the guarantee is Yok (well, little?), Then we wait for a long time (or ask friends) in Yulmart-nekondishka the cheapest device is similar, but NOT repairable and we buy / remove a spare part from it.
That is, in your case, a little easier. if the ten-stick burned out / determine by supplying current to the stick / then you need to buy a boiler with ten.
But if the heating element burns out, then a broken / crumpled device of the same series is expected (it's hard to believe, but there are a lot of that :-)) they buy it and the platform is removed from it.

Legs made of a piece of silicone stick / pick - CRAZY CRUISES!
For a long time, before the presentation of the photo, I thought, how can they / legs / be recreated?
Having examined the pictures, I was amazed at my fellow countryman's quick wits!
I would definitely not doper.
Great ATP for excellent and detailed / step by step photos.
Everything is explained and no one will have any questions probably even the girls gender banter

I have such a stick / pick, now in view of... I remembered the idea.
The implementation is great! So it’s in full!

NOTE.
The photographs of the silicone legs as a mass and size analogue show a cigarette of the type "RH lungs / wild impatience"
Given the brutal madiraction of the resource - the photos will be rejected for viewing, as advertising the forbidden ahahahaha
The situation can be saved by the obligatory inscription: The photos were taken in the fresh air and far from the kindergarten! In a place specially equipped for smoking!

Having examined the pictures, I was amazed at my fellow countryman's quick wit!
I would definitely not doper.

The wife entered the room and said that she had passed ... two legs from the grate. Everything was said that I think about these legs and about my wife herself in connection with them. He waved the beer and went into the kitchen, took a shovel and began to cut. (without beer, I would probably sit and think about how and what to make better)
PS. the pictures turned out "not very" - at 4 am in the room light without a tripod (and again with beer)

If you read a little more carefully, then after one post (mine) above it is written: Koptya was bought in January of this year (a year guarantee) in Yulmart, and there were no problems with them under the guarantee, well, at least from me (I have been buying from them for a long time on the second column).
And, by the way, I looked at the guarantee, there the guarantee is 372 days (I took it, esessno, at Yulia's discount), which means that it should also be not a year, but two (if it were "in full"). Regarding the ten: it seems that the "punching" to the ground and the simultaneous refusal of the ten is not a coincidence, because I am sure that the ten itself is normal and that is not the point (he shocks without this bowl). Heating element platform is normal.

I had a trouble with the smokehouse: cray: at first the electricity was cut off, they thought that it was due to overload, because at that moment a cartoon and another pressure cooker were working, then they turned on only one smokehouse, gained pressure and gave an error, they decided to change the wire- the good thing is that the same from all the equipment, the first time worked fine, and today I decided to smoke capelin - I gained pressure, worked fine, but the fish remained light and the chips were not charred ... We bought a smokehouse on 12/22/12 on April 15 of last year there was already a warranty repair.

I took a little earlier, but the story is one to one. Now I just carcass in it

[Svetlana]

Svetlana, Galina, and fix it? Is it possible in your area? I think with horror what I will do if something happens to me. Few people here know what it is ...

Svetlana, what about fixing it? Is it possible in your area?

So I wrote that it was already repaired a year ago, I'll try to call the service center on Monday - I'll find out how much the repair will cost ...

but the fish remained light and the chips were not charred ...We bought a smokehouse on 12/22/12/15 April last year there was already a repair under warranty.

you contact Brand directly, a representative.
I remember it was ... Louis, I think ...
she was sent this spare part - a pin, a cat. heats up and charring the chips. she herself replaced. it's not difficult there.

you contact Brand directly, a representative.

Yes, of course, I will call there. They also repaired

Well well.
While working, pleases. In a year, we'll see what and how.
I've laid my ribs on the GC, I'm waiting.

The question is for the men who "opened" the device. Why does the insulation on the wiring not burn out in MV and other devices? I was always interested in that.

In a "soy cow", by the way, something like rustles and rolls like sand in the head of the device (where the motor is), I think, and not insulation. But it does not shock.

[Svetlana]

Svetlana, called? What's the bottom line?

In "Dixie", by the way, they give Vitesse smokehouses (for chips). I think now greed seized... I already have Brand.

I had a trouble with the smokehouse: cray: at first the electricity was cut off, they thought that it was due to overload, because at that moment a cartoon and another pressure cooker were working, then they turned on only one smokehouse, gained pressure and gave an error, they decided to change the wire- the good thing is that the same from all the equipment, the first time worked fine, and today I decided to smoke capelin - I gained pressure, worked fine, but the fish remained light and the chips were not charred ... We bought a smokehouse on 12/22/12 on April 15 of last year there was already a warranty repair.

Good day.

Tell me, you have already contacted the Brand service center master. Were you helped to solve the problem?

Svetlana, did you call? What's the bottom line?

I called and said that it would cost 400 rubles, now I have to get there

[ksenia_br]

ksenia_br, Yes, above answered, thanks.

[Manna]

Manna , can "stick" this message https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=179478.0 somewhere closer to the hat?
(I read more than once: "the legs from the grate are lost - what to do now?)

can "stick" this message

Made

I called and said that 400 rubles will cost, now I have to get there

Svetlana, where to go ??? Maybe we can cooperate?

Svetlana, where to go ??? Maybe we can cooperate?

Oh, and on Saturday we already went to Egoryevsky prospect, 2, we did everything, changed the heating element to a new one, there was no time yesterday, now I will try

devices does not burn insulation on the wiring?

As a rule, heat-resistant cable insulation is used that does not melt or burn up to certain temperatures ...

I smoked 2 shanks in turn - the smokehouse worked well, hurray!

the first time I made legs, they taste ok, but they look boiled, completely white. did hot smoking, put 4 sawdust and start, for 40 minutes.

[OxanaE]

OxanaE, this is the amount of wood chips I put for smoking

The chicken turns out to be light, but smoked. If you put more wood chips (especially the one that gives the color), the meat will be brownish, but it tastes smoky.

And I add a little tea (leaf) for the color

then you need to add a little more chips, and you can tea leaves. but still everything turns out like boiled, so I want to make pork ribs next time. will be bright too?
I just opened the box and made it for the first time.

and what is there on the photo in the place with sawdust?

but still everything turns out like boiled

So it will be - this is not a grill or a brazier. Here, under pressure (high), hot steam is made, so it turns out, as it were, stew.

and what is there on the photo in the place with sawdust?

Currant leaf and twigs.

[OxanaE]

OxanaE , read this forum thread - there is no limit to imagination (I mean the variety of additives in the sawdust trough).

[OxanaE]

OxanaE, on the first page there are links to interesting and useful information in the topic and recipes

Has anyone tried to smoke cheese? I here on the English forum found how to smoke cheese 🔗

[OxanaE]

OxanaEI smoke cheese regularly. A square piece, about 3 cm thick. Cold smoking 10 min. After the end of the program, I leave it in the smokehouse for another 10-15 minutes. It is very important that the cheese is low in fat. I store it in foil in the refrigerator.