Grater Burner (2)

How good it was in the 80s - only "Classic" - with the opportunity to see it with your own eyes at work and try it yourself, all attachments are available, a knife for peeling vegetables. Exchange any homemade grater on some Berner item. And no headache: what to take.

[Sandy]

Although the question is not for me, I will answer in example 1.6 (this is an insert of 3.5 mm in the position of the cubes), I cut the onion into cubes into minced meat, and carrots for frying, if you need small strips.

Sandy, thanks, but I will have 3.5. I ask because I don't know whether to take 1.6 to the Pro or not.

marinastom, congratulations, a smart choice!

Margit, thanks is now clear! I am used to cutting potato pancakes in a combine - I like it because it is very fast and the potatoes do not have time to darken. Probably I don't need 1.6. Thank you!

I, too, for potato pancakes in a combine or in a grater from an electric meat grinder, I like it to be grated in mashed potatoes, I always rub a lot, I will not cut my hands with a burner

They don't have a fig! I called them - sorry, the site has not been updated for a long time, Borner is gone.

It is clear, and why this stub is so rare ... in theory it is in demand by everyone, but it happens rarely, strange.

But I still bought a 1.6 mm insert, although there is Roko
I really liked the onions in the cutlets. Yesterday I fermented the cabbage, chopped it on a thin knifeless one, so a 1.6 mm carrot is the best for such a cabbage: nyam: well, that's for my taste

[julifera]

Thank you girls. Probably I won't take Roko.
julifera, and 1.6 are you using for something?

I don't use that one now almost, such a small, fine one is rarely needed, except perhaps in some mashed soup with carrots for a change.
The girls write that she has onions for cutlets, I tried it - I don't really have such pieces in cutlets, I love it through a meat grinder.
Indeed, everyone has different tastes, I wanted this 1.6 so much, after reading reviews, and now I don't use it now, and I rub it tightly and slowly on it.

I rub the minced meat on this insert in two directions, not one. Then it turns out gruel from onions and fluffy cutlets

[Macabushechku]

I, too, for potato pancakes in a combine or in a grater from an electric meat grinder, I like it to be grated in mashed potatoes, I always rub a lot, I will not cut my hands with a burner

No, Sandy, I'm not mashed potato pancakes, I'm with such long worms. They are fried so delicious!
Thank you girls everyone! It remains to wait for the hero of the occasion, our dear Macabushechku.

azaza, can you take a photo of how you hold the cabbage? Well, if it is 8 kg, and you need to grate 200-400 grams especially, I am suffering with this, but I am still happy with my trend (although after buying I saw the Profi for 1800 rubles).

No, well, it's unlikely. I can't hold a grater, cabbage, and a camera down in my hands. And you won't be able to take a picture, even if you invite a professional photographer - so that the cabbage is cut without waste, you need to turn it all the time first one side, then the other.
Cabbage for 8 kg? What leaps and bounds did she use? But even so: first you need to cut it in half, one half still in half. Work with one quarter, the rest in the refrigerator. The first step is to squeeze the top off her. We put 200 grams - and in the refrigerator. The next day another 200 gr. The top is more or less hesitant - you begin to cut off the sides, and try to rub so that the leaves become sideways to the knife. Turn the cabbage at a new angle every two hundred grams. And so on until spring
And what kind of Pro is this for 1800 rubles?

Standard set. I saw it in the subway. It doesn't look like a fake.

But it doesn't look like the original either. Natushka, no offense. But I cannot imagine such a businessman who would sell goods for less than he bought. The Germans have Profi 55 euros. 1800 r.tugriks, if I convert correctly, it is 45 euros. And to the basic price, after all, you need to add money transfer, shipping, customs clearance (since a businessman, he should buy in bulk). On the one hand, he takes a wholesale lot at a wholesale price. But this price is again superimposed on additional. expenses. Plus storage, which also costs money, plus salaries directly to sellers and intermediaries ... Even with a stock, any normal businessman will not put up the goods cheaper than the manufacturer himself set the price for him.
Well, these are my thoughts. True, I have never been an economist or a businessman, therefore I do not insist on the correctness of my opinion. Rather, on my part, this is just an assumption.

Yes, what insults. I myself was very surprised, but I no longer need it (I bought the trend). Doubts have arisen, because it is rolled up in a film, you cannot consider everything, but METRO, it seems, should not trade in fake.

Girls and who has a deco old waffle, if I could see the pictures of how she cuts my waffle classic, maybe the deco old cuts thinner "wavy circles" well, which are not waffle on the second thickness, eh?
I read somewhere that the deco old has three thicknesses, is it true?

Someone asked the difference between cutting Korean carrots on a roco and a 1.6mm insert here https://Mcooker-enn.tomathouse.com/in...n=com_smf&topic=2844.1260

Sandy, there is a Rocko Classic - not the most successful grater, a lot of carrots get stuck in it. Rocko-Trend is a little different. I practically do not get stuck, just rinse it under running water. And cuts evenly, pretty.

[natushka]

Yes, what insults. I myself was very surprised, but I no longer need it (I bought the trend). Doubts have arisen, because it is rolled up in a film, you cannot consider everything, but METRO, it seems, should not trade in fake.

Well, if so, then I would take it without hesitation. Maybe even two))) Yes, at least to give it to someone, this is the dream of any hostess (well, of course, not wrapped). )
natushka , but this price also seems unrealistic to me. On the official German Berner website (there are generally the cheapest prices), the Profi costs 59.90 € (now, with a discount - 54.90 €).
If this is true, then I don't even know what to think, maybe they are no longer being stamped on the territory of Russia?

Someone asked the difference between cutting Korean carrots on a roco and a 1.6mm insert here https://Mcooker-enn.tomathouse.com/in...n=com_smf&topic=2844.1260

Yes, Sandy, I found this message yesterday and so I ordered 1.6 instead of Rocko. Also saved 5 euros

Sandy, there is a Rocko Classic - not the most successful grater, a lot of carrots get stuck in it. Rocko-Trend is a little different. I practically do not get stuck, just rinse it under running water. And cuts evenly, pretty.

I, too, really bastard from a smooth carrot on my Rocko trend. And I confirm that nothing will get stuck. True, in fairness I will say that I personally do not have a 1.6mm insert yet. Here Makabushechka orders, then I will compare.

Sandy, there is a Rocko Classic - not the most successful grater, a lot of carrots get stuck in it. Rocko-Trend is a little different. I practically do not get stuck, just rinse it under running water. And cuts evenly, pretty.

All girls, now I want to rock too Trend
Tanechka, can you tell me about deco old?

[azaza, Mona]

azaza, Mona, girls well enough to tempt me I already ordered for 150 euros, donated boots for the sake of Berner. I don’t need Roco, don’t-oh-oh ...

Here Makabushechka orders, then I will compare.

Well, if after comparison 1.6 wins, then I'll buy it myself. In the meantime, I'm happy with Rock.

Tanechka, can you tell me about deco old?

Sandy, us, Tatyan, there is a drain - you can get confused straight. I don't know if a question is for me, but there is nothing to answer it. Usually, if I know the answer to a question raised, I am not silent, I express myself.

[azaza, Mona]

azaza, Mona, girls well enough to tempt me I already ordered for 150 euros, donated boots for the sake of Berner. I don’t need Roco, don’t-oh-oh ...

Deep, Irochka, how can I understand you! Every day I convince myself: I don’t need Prima, I don’t need it !!!!!!!! But the arguments of reason have been acting on me somehow weakly lately. Eh, your joint venture would soon be closed, otherwise there is no strength, how I want to join you!

Here I am very impressed with the rock trend

[azaza, Mona]

azaza, Mona, girls, well enough to tempt me. I already ordered for 150 euros, donated boots for the sake of Berner. I don’t need Roko, don’t-oh-oh ...

And here we will tempt! When I started buying Bornera for myself, I also thought and thought: take Rocko or insert 1.6. I read the entire forum and this one and a few more, and decided that Roko would be better. It turns out smooth bars, square in cross-section, not round (there the knives are bent in a square, and on the contrary by 1.6 mm, I read that in order to be even, it was very necessary to lead the hand well, straight jewelry evenly, otherwise the knives will cut the sides of the bars. In general, I apologize, I'm such a temptress.

I was struck by a guess why in Trend and Prima there is a different strip of carrots, because of the knives, there are teeth in Prima, teeth in one row, and in Trend, Pro and Classic teeth in two rows, therefore the cutting result is different
But I will take rocko, I was tempted anyway

Sandy, in two rows of teeth located exclusively on the 1.6 mm insert. Prima simply does not have this insert, so she has all her teeth in one row.

Sandy, in two rows of teeth located exclusively on the 1.6 mm insert. Prima simply does not have this insert, so she has all her teeth in one row.

Yes, I know that there is no separate insert for 1.6 mm, but it is written that the 3.5 mm insert is adjustable by two positions 3.5 and 1.6 cubes, because of this, they do not release a separate 1.6 mm insert as unnecessary.

Tanechka, can you explain the old art for deco?

I'm not Tanechka, but if you don't mind - Deco Star is the same waffle grater, only in a different design (under the Trend). And between us - the classic waffle is better, sharper

it is written that the 3.5 mm insert is adjustable by two positions 3.5 and 1.6 cubes, because of this, they do not release a separate 1.6 mm insert as unnecessary.

Well, that's not entirely true. On the insert of 1.6 mm, bars 1.6 * 1.6 are obtained. And at the thin position of the insert 3.5, the bars are 3.5 * 1.6. I would call it not an analog, but a compromise solution.

Yes, I know that there is no separate insert for 1.6 mm, but it is written that the 3.5 mm insert is adjustable by two positions 3.5 and 1.6 cubes, because of this, they do not release a separate 1.6 mm insert as unnecessary.

Sandy, don't be confused. Box 1.6 duplicates Roco, and not some position 3.5.
On insert 3.5, it is impossible to cut bars with a section of 1.6 * 1.6

[Girls, order plate !!!!!]

Girls, order plate !!!!! This file contains 2 sheets, actually the second sheet for the intermediary, but suddenly you will be interested. For example, the most popular in the general order is Carly, as many as 8 pieces, not otherwise Azaza's advertisement worked 100%))))
Check and confirm orders in PM! After confirming the orders in PM, I will send the details of my Privatbank card for payment and decide on the amount.
Regarding the 10% discount, the intermediary confirmed to me that yes, there is such a discount, but it does not apply to an already promotional order (gift sets, a set of pros). I could not calculate the discount for everyone in the table, because we will have one large order on the site, and only the first 80 euros (someone's order, for example) will be without a discount, and then everything goes with a discount, except for promotional items. If we consider the discount as for everyone, then everyone has the first 80 euros without a discount, it turns out less, some will not succeed at all. Therefore, I propose this: we count so far without a discount, then I will look at the total amount of the discount that the site will give us for a total order and divide this discount for everyone proportionally, including even promotional orders, so that everyone is pleased, does it suit? Therefore, if we have calculated everything correctly with delivery and the costs of money transfers, then it will come out even cheaper, taking into account the discount, if somewhere something has not been taken into account, then due to the discount we will cover additional costs.

🔗

Tanya, Monochka - I have a vague suspicion of something - and you are there, yes

Well, yes, Carly ordered herself a 1.6 mm insert. I have Roko, well, let it be. besides, my son got married, you know. Now the young family is starting to buy. I also ordered a trend for them. They don't know yet. For the New Year, I already give them a vacuum cleaner, and this will be on March 8 to my daughter.
Irisha, why are you scaring me

[Deep]

And the plate is finally aerobatics.So everything is laid out on the shelves, each tsyfirka in its place.

Thank you, in such undertakings such meticulousness is needed, otherwise bad situations will immediately arise, counted on one thing, got another. I tried to avoid them. Yesterday the sign did not come down, my son helped me a little, I had to give him a separate keyboard from a long-dead computer, went to bed and in my sleep I was still looking for what I had missed. In the morning, it turned out that Carlos was lost alone.
I will give up jurisprudence, I will bargain with Berner. And at home, and more time for the child, and for cooking ..)))))))

Deep, since you are in Temko, I am waiting in a personal confirmation of your order.

I also envied .. you don’t have a second son for an hour?))))))))))))))

Of course have. Another, 22 years old, is studying (or rather suffering) at the university. When you finish studying - contact. And the first, 24 already. This year I finished my studies. And his wife studied with him in the same group.

Makabushechka, thank you very much for your cares and efforts according to our wrapping .
Work, a small child, household chores and such a large order! I don't know who else would have done this!

I have selfish motives, I wanted to buy a trend for my mother and some graters for myself as cheaply as possible, so I got involved))))))

Uh-uh ... this is not the last joint venture for Berner? I wanted something so much that I would not dare to give me a Carly, or would I manage at all? Where to lean?

if there are willing, it will not be the last. For example, I also want additional inserts for myself and my mother, her separate graters, I just won't be able to allocate money for everything at once, so I personally hope that we will try to make a second purchase, the nakrajnyak can throw a cry in his city even if there will be no volunteers.

if there are willing, it will not be the last. For example, I also want additional inserts for myself and my mother, her separate graters, I just won't be able to allocate money for everything at once, so I personally hope that we will try to make a second purchase, the nakrajnyak can throw a cry in his city even if there will be no volunteers.

So far, I have only ordered the Trend for the children, and there, by the summer-autumn, if there is still such a joint venture, I would have ordered other separate graters for them.

if there are willing, it will not be the last. For example, I also want additional inserts for myself and my mother, her separate graters, I just won't be able to allocate money for everything at once, so I personally hope that we will try to make a second purchase, the nakrajnyak can throw a cry in his city even if there will be no volunteers.

Yeah, hungry. This time I could barely resist not to order the Trend, to the heap of the existing Prima, but I let the financial issue down a little.
Natasha, I sent a PM confirmation for the order.

[makabusha]

makabusha, and you accidentally do not want to yourself? Original .. From Germany. Do you know where they are and why?
That would have come in handy for the New Year. ))

[Piano]

Piano, Thanks for the link. But, as it turns out, there are too many fakes now. The so-called Chinese Nicers.
Moreover, as it turns out, it is of quite satisfactory quality (not suitable only for raw vegetables, unlike the original one). And I want a real one. Therefore, the only way is to order directly from the manufacturer. Makabushi already has practice. Suddenly she needs this too

Hello girls
I also want to "turn around", I need your advice.
The grater is needed for cutting into rings and for the "Fur coat" salad. What can you advise in the conditions of austerity (I have already bought so much just recently that my husband will soon write out of the house book, therefore she has to save)? Maybe just buy a separate grater and a holder? Cubes and cubes are not of interest (suits the nice). Will the baby grater be in demand if there is a small child? Is the "Borner" (as it is called on ozone) container suitable for individual graters? And how big is it? (maybe someone measured who has it?)

[Piano]

Piano, And I want a real one. Therefore, the only way is to order directly from the manufacturer. Makabushi already has practice.Suddenly she needs this too

and I look after, for cubes in a salad, okroshechka. from Berner, I realized, do not wait for the real cube.

And if there is still a joint venture), I'll think about Rocco, and a bowl of hotsa, but I didn't master everything at once ...

Hello girls
I also want to "turn around", I need your advice.
The grater is needed for cutting into rings and for the "Fur coat" salad. What can you advise in the conditions of austerity (I have already bought so much just recently that my husband will soon write out of the house book, therefore she has to save)? Maybe just buy a separate grater and a holder? Cubes and cubes are not of interest (suits the nice). Will the baby grater be in demand if there is a small child? Is the "Borner" (as it is called on ozone) container suitable for individual graters? And how big is it? (maybe someone measured who has it?)

For a Fur coat - a Pizza-grater, and for onion rings - or any basic set, cheaper than Trend, but there are cubes, and if only in rings, then a Combislicer. I really don't have it, I don't know how well and how thick it rubs, let the girls tell me.
Baby Greater - I haven't got it yet. But I heard that it is not put on the basket. And Borner has two pots. Oval is more bulky, Rectangular - look here, I photographed it with two half-liter jars inside, you can estimate the size. And so its dimensions are 35 * 18.5 cm.
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=170448.0

And I want Dekok 1316, for cubes, all the same Trend is not for cubes, but I couldn't find where to order cheaper. Although I found it at Kidstaff for 185 UAH, I wonder where they order?

[makabusha]

makabusha, and you accidentally do not want to yourself? Original .. From Germany. Do you know where they are and why?
That would have come in handy for the New Year. ))

I recently had a Nayser and a Chinese one for 175 UAH. But if you find where exactly the original order from Germany comes from, then we will try to organize such a purchase.

[makabusha]

makabusha , right here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=7335.15860 answer # 15879 especially for you.

[makabusha]

makabusha , right here https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=7335.15860 answer # 15879 especially for you.

thank you, enlightened!

On Monday, I will have information about the euro exchange rate, which we will use in calculations, and then I will immediately send the details to my Privatbank card, so do not worry, and I am waiting for another confirmation of one order.

Well, that's not entirely true. On the insert of 1.6 mm, bars 1.6 * 1.6 are obtained. And at the thin position of the insert 3.5, the bars are 3.5 * 1.6. I would call it not an analog, but a compromise solution.

Right as always

Here's a photo specifically, a 3.5 mm block, and the position of the "cubes" on it

Hello girls
I also want to "turn around", I need your advice.
The grater is needed for cutting into rings and for the "Fur coat" salad. What can you advise in the conditions of austerity (I have already bought so much just recently that my husband will soon write out of the house book, therefore she has to save)? Maybe just buy a separate grater and a holder? Cubes and cubes are not of interest (suits the nice). Will the baby grater be in demand if there is a small child? Is the "Borner" (as it is called on ozone) container suitable for individual graters? And how big is it? (maybe someone measured who has it?)

For a fur coat, the pizza reiter is rather large, it turns out larger than on the Soviet iron grater, the baby greiter is closer, but everyone is not as used to it. Baby grater rubs mashed potatoes on one side, fine shavings on the other, which is what children need.

Girls, after all the clarifications, the plate was updated, there are final numbers. Now the link and details will be sent in PM.

I already picked up the order for myself, only the hay looked at everything