Grater Burner (2)

Thank you, I also read that the trend is the knifeless insert is corrugated and this creates some discomfort when cutting cabbage. And in prima knifeless - smooth and the cabbage glides better.

Oh, Dzhulichka, don't tear your soul! I am the current that refused the Lotion I wanted it for the sake of maximum thickness, and even the maximum there turned out to be thin for my needs. And I already tuned in to her
Here Primushka beckons me, even burst! And I can't think of something to do with her that my hard worker Trend cannot cope with. Trendy cuts absolutely suit me, except for a thickness of 0.8-1 cm. But, alas, not a single grater will give this ...

Direct my thoughts! I also thought to order Prima because of the thick cuts, but it turns out she is not so thick. I'll cut zucchini again in summer with a knife.

Thank you, I also read that the trend is the knifeless insert is corrugated and this creates some discomfort when cutting cabbage. And in prima knifeless - smooth and the cabbage glides better.

I'll tell you a secret - it's EASY for me to grate cabbage on the Trend - no discomfort was noticed

Thank you, I also read that the trend is the knifeless insert is corrugated and this creates some discomfort when cutting cabbage. And in prima knifeless - smooth and the cabbage glides better.

I have nothing to compare, but it suits me very much!

In general, Prima loses well to VIP - the Primov insert is 1 cm - it does not have a thick thickness !!!
I have 0.7-0.8 - this is one of the most common bar thicknesses on Vip!
For some reason, they went with Prima to lower opportunities

Knifeless in Vip on the thickest one also gives 0.6-0.7 cm

[julifera]

julifera, but I don't consider VIP at all, because it is no longer there. I choose from prima and trend ...

At the moment, I would take Trend or Pro (if I had nothing)

Yes, I actually have nothing) Thanks for the advice. Much has cleared up.
Still, I am attracted by the variety of thicknesses in prim. I liked each of them. And the smooth bladeless one seems to me a significant plus. Eh, I would like to hold the trend in my hands ..)))

Thank you, I also read that in the trend the knifeless insert is corrugated and this creates some discomfort when cutting cabbage. And in prima knifeless - smooth and the cabbage glides better.

Toka wanted to say, but Julifera was already ahead of me: if this relief interferes with something, it's only when cutting bell pepper. But I cut it outside the box, even contrary to safety precautions, so in the case of pepper, this cannot be considered a technological drawback. And the rest is no problem, including cabbage. On the contrary, I really like the way he cuts the cabbage. At first there was a lot of waste, because I was holding the head of cabbage incorrectly. And now zip-zip - and everything is clean, neat, without waste. Ball!
In general, the Trend is a great workaholic, practically devoid of flaws. Well, the Germans do not understand that we need even thicker! They would understand - not only would they have foreseen 0.8-1 cm, but also 1.5 cm. I would have bought such an insert with pleasure.

Still, I am attracted by the variety of thicknesses in the prim.

Yes, this is a huge plus. But it's bad that there is no average thickness in this variety. Thin, thin, and thick, thick. The insert on the Trend gives 4-4.5 mm, a very useful size of 3 mm is not enough, 5.5 mm is already a lot.

[julifera]

julifera, but I don't consider VIP at all, because it is no longer there. I choose from prima and trend ...

By the way, I wrote about it not for advertising to buy, I know that it was removed a long time ago, but in order to show that Prima is not much cooler than Trend ...

At the very beginning I wanted to buy a Pro, but my husband balked - it seemed expensive. But then he bought two (I will accept and Trend), not immediately, of course, so he liked the graters.
In Pro, slicing of different thickness + 1.6 insert for it can be purchased. What to praise him, Pro - the name speaks for itself. At the beginning of the topic there are posts of girls who have almost all Berner modifications at home, but the Pro stands out from all.

Eh, I would like to hold the trend in my hands ..)))

Come to Saki, cut, scold! I would also like to Take hold though!

[annnushka27]

By the way, I wrote about it not for advertising to buy, I know that it was removed a long time ago, but in order to show that Prima is not much cooler than Trend ...

This is unambiguous. If PRIMA was definitely better than TREND, then PROFI would be an analogue of PRIMA, and not an analogue of TREND. )
Eh ... How complicated it is)))

Come to Saki, cut, scold! I would also like to Take hold though!

annnushka27, thank you very much, but I have less than a day to choose from. How not to order both out of despair))) And my PRIMA is already tomorrow morning bye-bye to Feodosia)

Eh, I would like to hold the trend in my hands ..)))

It is a pity that you live far away, and so, I would gladly let you play.

[annnushka27]

This is unambiguous. If PRIMA was definitely better than TREND, then PROFI would be an analogue of PRIMA, and not an analogue of TREND. )
Eh ... How complicated it is)))
annnushka27, thank you very much, but I have less than a day to choose from. How not to order both out of despair))) And my PRIMA is already tomorrow morning bye-bye to Feodosia)

Order both, then you will quickly sell one here in the subject (if you can part with it, of course?) Will you order to Germany? There is a good price.

azaza, can you take a photo of how you hold the cabbage? Well, if it is 8 kg, and you need to grate 200-400 grams especially, I suffer with this, but still I'm happy with my trend (although after buying I saw the Profi for 1800 rubles).

In general, Prima loses well to VIP - the Primov insert is 1 cm - it does not have a thick thickness !!!
I have 0.7-0.8 - this is one of the most common bar thicknesses on Vip!
For some reason, they went with Prima to lower opportunities

Knifeless in Vip on the thickest one also gives 0.6-0.7 cm

Explain the girls to the stupid, how is this 1 cm insert not thick?
What kind of insert is meant, knifeless? and how thick?

[Sandy]

primovskaya insert 1 cm

this is an insert for 1 cm bars width
Sandy - you yourself wrote, when you did the photo review - I learned from you that this insert has only one thickness (or height, as anyone can understand)

[Sandy]

this is an insert for 1 cm bars width
Sandy - you yourself wrote, when you did the photo review - I learned from you that this insert has only one thickness (or height, as anyone can understand)

Ahhh, I mean an additional insert of 10 mm, got it

All the girls are superbly good, so do not hesitate, love yours like a dear

But strangely, I noticed that, for example, they have a basket for 6.9 euros, that is, about 73 UAH, while we have it for 60 UAH. Maybe our vessels are not made in Germany? Although, what's the difference, it will not become blunt, trough, and there is a trough.

But strangely, I noticed that, for example, they have a basket of 6.9 euros, that is, about 73 UAH, and we have it for 60 UAH. Maybe our vessels are not made in Germany? Although, what's the difference, it will not become blunt, the trough is the trough.

So I thought that I would buy a basin later

And I can do just fine without a basin, it's so big that I feel sorry for the place for it.

And I can do just fine without a basin, it is so big that I feel sorry for the place for it.

And I have bread in it in a bag, and then I collected it all the time on the tables. It takes up less space than a bread bin.

And I have bread in it in a bag, and then I collected it all the time on the tables. It takes up less space than a bread bin.

He is so big? I'll have to see alive

azaza, can you take a photo of how you hold the cabbage? Well, if it is 8 kg, and you need to grate 200-400 grams especially, I suffer with this, but still I'm happy with my trend (although after buying I saw the Profi for 1800 rubles).

Wow, you have cabbage! Chernobyl or something. But seriously, cabbage in any way needs to be cut, small in two pieces, and large in 4 or more pieces. And then twist the piece as you like.I grater with one hand, and cabbage with the other, everything works out fine, I'm not used to rubbing horizontally, so I hold the grater vertically.
Nothing that I answered for Azaz?

Wow, you have cabbage! Chernobyl or something. But seriously, cabbage in any way needs to be cut, small-into two pieces, and large-into 4 or more pieces. And then twist the piece as you like. I grater with one hand, and cabbage with the other, everything works out fine, I'm not used to rubbing horizontally, so I hold the grater vertically.
Nothing that I answered for Azaz?

Yes, such cabbage both in the market and in stores, if you find 4-5 kg ​​well. And we grow them on collective farms. Here I am suffering on a salad to grate, everything is falling apart, even dense. And hold 1.5-2 kg (a quarter) in your hand, and you need it for a salad 200g.

Girls, thank you all again, the choice has been made (read - the diagnosis has been made) - I TAKE BOTH
The last question - a basin for PRIMA and PROF (oval) - does it fit both models?
It says "passend zum V5, V6 und allen DesignLine-Einzelreiben". which, as it were, hints at its versatility ...

Girls, thank you all again, the choice has been made (read - the diagnosis has been made) - I TAKE BOTH

That's right! It was evident that the night was sleepless. We will then wait with interest for your responses.

He is so big? I'll have to see alive

No, it's compact, much more compact than an oval one. Here I put two half-liter cans in it for a reference point.

In addition, it has rubberized legs, it does not slide on the table, but an oval one, there are no rubber bands on the legs.

Tan, everything is clear with cans and bread, but what graters are suitable for him? Prima will fall on him?

Tan, everything is clear with cans and bread, but what graters are suitable for him? Prima will fall on him?

Yes, it will. There, the plus signs mark the graters that are placed on one or the other pots.

Yes, it will. Here you can look at the bottom of the plate. There, the plus signs mark the graters that are placed on one or the other pots.

I see, I see, thanks!
Strange, but in the same place, in the picture, the prima is not in the list of compatible ones:

[makabusha]

makabusha and girls, those who participate in the joint venture! Today I chose a product on that site and for convenience put the product in the basket. And when I looked into the basket, they wrote to me:

Zwischensumme 159,80 €
Rabatt -10,97 €
inkl. Mwst. 19% 25,51 €
Gesamtsumme 148,82 €

Those who have not studied German translate: Amount 159.80 Euro, Discount € 10.97!
That is, because of the large order, they make additional discounts !!! And the discount is quite considerable, you can buy another grater
Here are the girls, my pre-order. Say that you forgot: Today we must finally decide

Grater PROFI
Insert 10mm Pro
PRIMA gift (PRIMA + Baby greater and Waffle)
Insert 10mm Prima
Sudok
Peeler knife, round
Grater Rosti
Carly Grater
Grater Roco PowerLine

And insert 1.6 is not necessary?

I take it ... I decided that 1.6 is not necessary. Or should I take it? What is it for?

Girls, how does the pro differ from the trend, except for cutting into cubes, an iron case and a plug in the kit?

Girls, how does the pro differ from the trend, except for cutting into cubes, an iron case and a plug in the kit?

It seems that this is all ... Well, perhaps at a price) And the trend cuts into cubes. Not?

Although I read the instructions, as in the pros, you need to cut the product in the fruit holder, or am I mistaken?

It seems that this is all ... Well, perhaps at a price) And the trend cuts into cubes. Not?

So in the trend just need to cut the product in the fruit holder, I thought differently in the pro ...

[Sandy,]

Sandy, they are the same. The only difference is in the material and the presence of a plug in the Pro kit.

Girls, please advise. Maybe it's true to take 1.6 instead of rock? ...
How do you get 1.6 carrots?

And it is not all iron, but in places, the inserts are also made of plastic and ribbed as in the trend, even the insert of 1.6 mm teeth in two rows as in the trend
The same trend, but twice as expensive.

How do you get 1.6 carrots?

I didn't really like it on 1.6 - some very small, like a rattle
On Prime at 3.5 on thin - it will be much nicer

[Sandy,]

Sandy, they are the same. The only difference is in the material and the presence of a plug in the Pro kit.

Girls, please advise. Maybe it's true to take 1.6 instead of rock? ...
How do you get 1.6 carrots?

The difference in appearance, on the rock is more beautiful - round stripes, and 1.6 square, or rather rectangular, or how to put it

I didn't really like it on 1.6 - some very small, like a rattle
On Prime, 3.5 on thin - it will be much nicer

I laid the carrots along like an eggplant on layers, and long even stripes are obtained

[julifera]

Thank you girls. I probably won't take Roko.
julifera, and 1.6 are you using for something?

Oh, girls, Trend with a saucepan, 10mm, Pizza and Baby is still coming to me. The rest is later. I haven't found a knife-less plug yet.

[julifera]

Thank you girls. I probably won't take Roko.
julifera, and 1.6 are you using for something?

Although the question is not for me, I will answer in example 1.6 (this is an insert of 3.5 mm in the position of the cubes), I cut the onion into cubes into minced meat, and carrots for frying if you need small strips.

I use 1.6 for frying in soup and pancakes. I like it very much! Roko is, I use it only for carrots.

The girls wrote that they use 1.6 for minced onions.