Philips HR 1659/90 blender cuts into cubes (pros and cons)

Hello ladies,

I have a model 1669, complete with a grid of cubes (average relative to all) + a pusher with a handle. Add. I ordered the lattices separately in the corporate online store. The box contains 3 grids: a large and small cube, a triangle + nozzles pushers (handle bases) a triangle and for small cubes. So, the handle for the pusher is removed and installed on all nozzles of the pusher, in the instructions I saw pictures of how to shoot, and also, the nozzle of the pusher for the lattice of the smallest cubes is suitable for the largest ones. These are the tricks from the manufacturer, I did not immediately find it myself. I have been using the device for more than a month, I am very satisfied.
That is, it turns out: in total, 4 grids are suitable for 1669, 3 nozzles for the pusher and 1 handle for assembling the pushers go to them. Everything is compatible. Good luck!

[allaaster]

allaaster - thanks for the clarification on the PHILIPS HR-7968/90 set, otherwise I have already started to wool the English-language Internet for the presence of a pen in it.
Unfortunately, I don't have a 1669, but a previous model of a Phillips cube, and I don't have the original handle to take off and put on.
And I still ordered a holder for the grilles, as soon as it comes - I will try out the pushers without a handle, and then we will see.

[Tatoshenka]

Tatoshenka - Did you order each grille and pusher separately in the SC or with a set 7968/90?
Maybe we are missing a pen here in the sets?

We printed out what is included in the set, took it to the SC and accordingly received three reshotochki, two pushers and one handle, at a price it turned out cheaper than ordering on the Philips website.

Well, I bought the same Filipka 1669. I haven't chopped anything yet. I just looked at the instructions. It says what to chop, and cut the cubes, and knead the dough in turbo modes. And what other speeds are there for? There are many of them? By the way, did anyone knead the dough? The husband was asking for a long time why he bought it. There is Bosch MUM 5, there is a Tefal blender. I decided to replace him. It is low-power and without graters. I only use it as a chopper. Now I will look for where to buy a small cube cutter

It says what to chop, and cut the cubes, and knead the dough in turbo modes. And what other speeds are there for? There are many of them? By the way, did anyone knead the dough?

Congratulations!

Turbo mode is useful for cutting hard foods and vegetables that are difficult to cut.
But, lately I liked using a high speed, for example 12-15, the rotation is slower, but the cutting is smoother. On a turbo, the knives rotate very strongly and quickly and sometimes vegetables slip quickly and you get not cubes, but columns. But it doesn't always happen, it's not fatal

I have not tried the dough yet, I am waiting for the delivery of one pribluda for the dough, then I will try everything together

Thanks for the answer. I will look forward to the result

Girls, and who took where in Ukraine PHILIPS HR-7968/90 grilles complete with a pusher. I called Photos and is not cheaper. One lattice
They say, call the service ...

[PHILIPS HR-7968/90]

Girls, and who took where in Ukraine PHILIPS HR-7968/90 grilles complete with a pusher. I called Photos and is not cheaper. One lattice
They say, call the service ...

What's in the PHILIPS HR-7968/90 set with Cheaper. no - I showed a scan on the previous page, where green check marks, I marked what was included. There are grilles, there are pushers, there is only a universal handle for the pushers.
And the manager himself is cheaper. no said that the set comes with pushers and was right.

You can buy an additional set on the internet PHILIPS HR-7968/90 from 3 bars for 300-380 UAH

Joy is that in this set there are pushers for all 3 grids - one for two types of cubes + one for triangles!
A sadness the fact that the pushers in this set are WITHOUT A HANDLE !!!

Here is a scan of the instructions for PHILIPS HR-7968/90
- light green check marks - what is included,
- in red - missing part.

And the manager himself is cheaper. no said that the set comes with pushers and was right.

And they told me there today that no I will have to call again

I took on BT. Kiev. ya. with ejectors, but no handle. I think they should be the same everywhere, because they are packed in a branded box.

So yesterday I became the happy owner of the filipka 1669, thanks a lot to everyone who wrote about him here and special thanks for the help to Lyudmila (kirch) !!! I like almost everything in it: today we have already tried and made vinigret - supper !!! Of course, for me the cubes are a bit large (I will order additional lattices later), but my mother liked the size specifically for the vinigrette. The only thing that bothers me is that the knife in the chopper bowl (small) does not fit on the axle to the end, that is, between the bottom of the chopper bowl and the plastic "piece" on which the knife itself is fixed, a gap of about 4 mm is obtained (I see this part of the metal axis) And the knife itself is somehow crooked. Girls, tell me please, is this the way it should be or not, maybe this is a marriage? I just have another Tefal blender, so there the distance between the bottom of the chopper bowl and the knife is almost invisible, about 1mm. Thanks in advance to everyone who responded.

Christina, I'm glad that I helped with the choice. Itself was in throwing for a long time. The knife in the grinder also does not reach the end. Probably, it was intended. And what upset me was that the dry loaf was not completely crushed into crackers. A piece remained and did not want to grind in any way. In low-power Moulinex, the result was always normal. Until I understood what was the matter. But the onion is chopped much better than in the Mule, which pleased

Lyudmila, thanks again for your prompt response! And I'm so glad that you helped me with the choice, otherwise I would still be tormented I think I will definitely use the filipk every day (it is convenient for me), and this is important if I have two young children. My husband also says to me, probably so conceived that the knife would not be fully dressed, but I had doubts. While I was not doing anything in the grinder, I did not risk it - I think I will suddenly have to exchange.

Good day. Tell me what is the time of continuous use of the device so as not to burn out. In the tables, in my opinion, it is too small, especially for beating eggs.

I welcome everyone!
I would like to contact the owners of attachments for model 1669, THOSE WHO ARE BUYING IN ADDITION! a large square, triangles and another square.
The following information interests:
what is the size in centimeters-millimeters in this attachment in length, width and edge?

I recommend the link here 🔗 🔗 🔗 I immediately took the combine and all the attachments for it. I'm happy! Maybe someone will come in handy. And then she herself was tormented while looking for the modification and codes of those nozzles.

Alain, are there grilles in a set with pushers in Photos, or not? Otherwise I called them, but they didn't say anything specific

yes no, sort of .... just a set of gratings. At first I could not find them anywhere. Then I went to the office. phillips website, downloaded accessory codes. Then she skillfully phoned the shops and googled. Phillips service is an advance payment, wait two months, etc. And then I found a corolla, and grates, and for potatoes. So that the girls do not go my way, I dropped links to all of you. And then I sat and was upset, but where to get a whisk? And here all the beauty is in one place. If there was still a discount for the new year, I would have taken another set of nozzles. Otherwise go look for it, in a year or two these gratings ...

There is a pusher for a small lattice, but it does not have a handle (just a plate with pushers in the size of the cells). I use. Everything is well washed in the PPM

In a set with gratings there are two ejectors, suitable for all three gratings, without a handle, but if you have 1669, then the handle is included with the combine, I have 1659, then I use it without a handle, ok.I also took a photo session.

Hello to the happy owners of Phillips, after reading you I also got infected with it, girls tell me, is there a fuse against overheating?

Girls, I can't understand how the 1669 models differ from the 1659? The descriptions do not really say anything. Indirectly realized that in some modedy the cube is large, and the other is small? Thank you in advance!

[5]

Girls, I can't understand how the 1669 models differ from the 1659? The descriptions do not really say anything. Indirectly realized that in some modedy the cube is large, and the other is small? Thank you in advance!

T 1659 - the cubes are a firmly embedded, non-removable lattice - there are only one cubes - the size 9x9 mm

T 1669 - lattices can be removed!
BUT - only comes with alone lattice and it is not very pleasant in size, there only the middle compartments are shaped like cubes 1.1x1.1 cm, and the side ones are huge rectangles. If you want 8x8 mm cubes, then you need to buy separately either in SC 1 a lattice in the region of 200 UAH (without a pusher! The pusher itself is separately 140 UAH), or a whole set of HR7968 / 90 of 3 lattices with a pusher for 300-350 UAH.
This set includes grilles:
- cubes 8x8
- cubes 15x15
- triangles

[5]

Thank God!!! Thank you very much!!!

T 1659 - the cubes are a firmly embedded, non-removable lattice - there are only one cubes - the size 9x9 mm

T 1669 - lattices can be removed!
BUT - only comes with alone lattice and it is not very pleasant in size, there only the middle compartments are shaped like cubes 1.1x1.1 cm, and the side ones are huge rectangles. If you want 8x8 mm cubes, then you need to buy separately either in SC 1 a lattice in the region of 200 UAH (without a pusher! The pusher itself is separately 140 UAH), or a whole set of HR7968 / 90 of 3 lattices with a pusher for 300-350 UAH.
This set includes grilles:
- cubes 8x8
- cubes 15x15
- triangles

Thank God!!! Thank you very much!!! I already called the store, there everyone knows nothing (everyone is still growing and growing above themselves). About the fact that the grille is removed or not, I could not even imagine that this happens ... That is, if you buy a replaceable set of grilles, then only for model 1669 will it work? This popandos would be ...
Now I’m telling you ... I don’t know how to wait, if I really want to, it’s worse than it hurts. In general, I already ordered 1669 on Photos, since 1659 is not available. And for model 1669 there is now a special offer of a whisk as a gift, and this was what was led to it. Above, the girls gave links to additional grates and a crush for mashed potatoes, so I also have them, well, what NG is on my nose, Santa Claus knows that I have been an obedient girl all year. In general, only in the next. I'm waiting for Wednesday, because they bring them to our department once a week.
Now I can calmly reread the whole topic

Please answer about the fuse, I had Brown before, so there was no fuse, I think maybe that's why the motor burned out, so it's important for me. Is there a Model 1669-fuse? Nowhere can I find this information ...

[MSK]

Please answer about the fuse, I had Brown before, so there was no fuse, I think maybe that's why the motor burned out, so it's important for me. Is there a Model 1669-fuse? Nowhere can I find this information ...

MSKwhile the people are silent, I also can't tell you anything intelligible about the presence of a fuse, unfortunately ... but I also have a Brown blender for 600 W, it is already, thank God, almost 12 years old, only the whisk has broken, it is spinning more does not want to. So I think it's not about the fuse, my opinion.

Yes, maybe not in the fuse, of course, but somehow Brown worked a little for me, only 4 years Now I think I can still buy a motor for it (an inexpensive brown that fits) and after NG already cubes from Philips ...

Found a photo report with comments about the work of Philips 1669/90 - who can come in handy. 🔗

Hello! Made myself a present for the New Year: Phillips 1669 + additional bars. To say that I am happy - to say nothing - I am happy. And the husband, who was against it, is simply delighted.He said that this blender and slow cooker are the most needed in our kitchen. Salads are chopped in a minute, vegetables in borscht-soups, stews, cabbage - everything is super !!! Thank you all for your feedback and help in choosing a technique. Happy New Year!!!

Congratulations on a great purchase !!! After NG, I want to buy it, I also dream, I can’t they still see the action that when buying this blender-nozzle for mashed potatoes as a gift))) Why did you buy it? if it `s not a secret

Thank you! I took in Photos for 1579 UAH. + there was a whisk as a gift. I think I would use a nozzle for mashed potatoes more ... I bought the lattices immediately.

And, well, here I wanted to, and now there is an action in Allo with a nozzle for mashed potatoes, I'm thinking of taking it there, write your impressions about the blender, if it's not difficult, and still a question that no one could answer me, there is protection against overheating?

I won't tell you about the protection - I don't know. Yes, and it did not work for me for so long to overheat ...
Several photos:
🔗 potatoes with mushrooms on a cube, which is included

🔗 cabbage on a pie triangle

Well, Olivier on the smallest cube. For us size
🔗 🔗 🔗 🔗

Class, tell me, haven't you used a grater yet? How does it shred cabbage interesting? In general, of course, I would also like to take the lattice attachments right away, because for the salad it’s very small. And in general, are there any inconveniences when using this blender?

I haven't chopped cabbage yet. I'll try one of these days - I will definitely report back. So far I have not felt any inconvenience. Cooking has become more enjoyable and faster. Especially under NG, when there are a lot of salads and guests. Zipper - and a salad on the table. I love. It is much easier for me to wash than to plan all this endless amount of vegetables, especially boiled potatoes and pickles. And more time and more intact handles.

Now, with this I agree, well, I'll wait for your impressions of the graters))) Salad quickly is super!

I also wanted it and even ordered it)) I cut salads with Nayser Dicer, there are 6 in 6 cubes, so I was looking for a combine with such dimensions, but everywhere they were large, and in the filipka in replaceable attachments I was with small cubes. And then I read that the small cubes are 8n8 ((((. And then I caught my eye a redmond with 8n8 cubes and the price (if with additional attachments, namely they were and I needed)) two times less. ...

Congratulations on a great purchase !!! After NG, I want to buy it, I also dream, I can’t they still see the action that when buying this blender-nozzle for mashed potatoes as a gift))) Why did you buy it? if it `s not a secret

For me for a blender + a whisk as a gift + a nozzle for mashed potatoes + a set of gratings = 2291 UAH))) I am glad that I took a set of gratings, for me it would be big through the main grate, but just right)))

[RybkA]

RybkA well, you generally have a complete set))) _{dear infection} how do you like the mash nozzle?

Cabbage is good, it chops thinly. The grater is also nothing. I freeze grated vegetables (carrots, beets) for dressing, but I would like a smaller grater for a salad of grated carrots, otherwise I rub everything perfectly and I also finely chop the onion now with a blender.

[RybkA]

RybkA well, you generally have a complete set))) _{dear infection} how do you like the mash nozzle?

Thank you, that's for sure, I already took everything I wanted))) For the price, yes, like a combine, but I am satisfied that this blender complements my old Boshevsky MUM. I dreamed about cubes for a long time, only to buy a Cube to MUM, then a new kitchen))) Unfortunately, there is not enough space for everything. So you have to pay a little more, but for pleasure. I haven't tried the mash nozzle yet, maybe I'll ripen tomorrow)))

[RybkA]

RybkA and I also got infected with cubes))) Do you use a combine? Otherwise, there is an opinion that it is still cumbersome and rarely used ...
Irma so I read that the grater is too big ... well, nothing, I don't do carrots in Korean)))
In addition, I already have 1 blender with graters.

Cubes are very cool, they really shorten the cooking time. So think ... you will definitely be satisfied. It will be necessary to try the grater again, compare it with the MUM graters.Although I do not use graters in the combine, most often with different whisks for cream / dough and a meat grinder, but with graters a few times. I rub on Berner. You have to come up with a scheme for the soup. For example, first grated carrots, then onions, then put the required size cubes for potatoes. Something like this...

[RybkA]

I have already tried all the variants of graters, quadraticoFF and nozzles. So here:

RybkA well, you generally have a complete set))) _{dear infection} how do you like the mash nozzle?

The mash nozzle is very amazing, I did not know that such a simple process can be translated into pleasure.

Class, tell me, haven't you used a grater yet? How does it shred cabbage interesting? In general, of course, I would also like to take the lattice attachments right away, because for the salad it’s very small. And in general, are there any inconveniences when using this blender?

I chopped the cabbage, or rather cut into cubes for stewing. I took the main grill, not from the set. It was very thin on the grater for stewing. For a salad, I think it will be the same. For roast, I cut potatoes into the largest cube. Grated carrots, I'm super.
In a small one I ground Parmesan, perfectly turned into crumbs.

Girls, and where IN RUSSIA you ordered extra. dice knives for this blender? share a link, pliz ...
---------------------------
the question is cleared ... found in the Mediamarkt Philips HR7968 / 90 Slicer attachment - 1799 rubles (is it expensive or not? and by the way it is not clear whether it will be with pushers there or without) and in Eldorad - but it is not available there and you can't even see how much did they cost when they were ...

[Boyaka's cat]

Boyaka's cat, in a set of additional grids, there is no pusher itself, BUT it is in a set with a blender. And this pusher is also collapsible, consists of the handle-holder itself and replaceable nozzles for pushing. The set of additional grids has two interchangeable nozzles for the pusher: a triangle and a small cube. No big cube, but I'm using the attachment from the blender kit.

: girl_dance: I bought this blender too! For which I am incredibly grateful to this forum!

I diced a pumpkin, part in the freezer, from part - milk porridge with rolled oats and pumpkin cooked in a cartoon ..... I cut a bowl of Olivier (instead of sausage - boiled chicken breast, chilled, tasty, but finely crumbled into diced cubes while stirring Olivier, sobssno , in view of the peculiarities of the meat itself - I will do it with sausage other times), cut carrots and potatoes into cubes raw and cooked them in the microwave for 10-20 minutes, cooled them and added them to Olivier ...

I made a salad on a grater disc: daikon + carrot + homemade dressing. mayonnaise with sour cream 50:50, usually the apple is still rubbing, but then, to celebrate, the memory was knocked off .... The size of the grater is the most for me ... For borsch, beets with carrots for frying are what you need ... lettuce, my husband tried to nag that carrots should be finely grated \ manual \ there, but I think how he heals his teeth and can chew normally, he will be grumpy anyway .. or let him rub it on a fine grater

I haven't done anything else yet, I didn't have time.

Summary: 1) grater - the size is good, but it could be sharper, I think. Although there is nothing to compare with, I have never had any harvesters .... but the carrots were going slowly .... Well, or I find fault.
2) The hand blender does not splash (I have another well-deserved Phillips hand blender, so it splashes in the upper horizon when you puree or make mayonnaise). It is also easier to clean than from my old Phillips - not so squiggly and deep, just everything is washed off under the stream of water ...
3) native cubes are large for Olivier, as everyone here said. But Olivier eats still much more pleasantly from one thought, how simple and quickly it is now done .... I will take extra. lattice-knives the other day.

I haven't tried chopper and dough hook yet. Disk shredder, too, did not have time. I don't expect anything supernatural from the grinder, I love and use similar ones for a long time (I also have a Tephal grinder - so ... 17 serves faithfully) ...in my previous Phillips I have the same but larger size, I loved it very much, but a gearbox quickly screwed up on it (if I call it correctly, there are three toothed figovines, the middle one is put on the pin of the knife, so it quickly burst and stopped working - recently we and my son disassembled it and found the cause of the breakdown, repaired it themselves, glued it together ... I hope the new Filiponchik won't have it) ..... for me, as a hostess, a chopper and an immersion blender, duplicated due to the purchase of a CUBE CUTTING new blender, is as the assurance that loved and frequently used helpers do not suddenly disappear ...
I chose between Bosch Cubix and this one. Some of Bosch's functions would be unclaimed and, by the way, also duplicated at the same time ... so I am very pleased with the purchase ..... everything you need, everything that is often used is in it!

Girls, today I looked at the instructions carefully (I did everything cooked above without reading the instructions - salad from vegetables on a turbo, cubes - at a speed of 15) - it turned out from the pictures that the functions associated with a large bowl (cubes, grater, shredder, dough kneading) - should only be used with the turbo button. With an immersion blender, too .... Why shish then a million speeds? For optional accessories such as a whisk? What can you do at low speeds?

How do you use the buttons?

Hello!
I wanted to ask the owners of Philips 1669 - no one was accidentally interested in whether shredding / grating discs from philips HR7762 (7775, 7778) combines are suitable for it?

P. s. And another question for the residents of Ukraine - do you have online stores where you can buy 1669 with an additional grill and a whisk and what would be the delivery to Europe? Otherwise we have only model 1659 on sale in Latvia, but I certainly want replaceable grids for different cubes.

Filia and I cooked borscht today ...... Debriefing:

-Cut the potatoes into cubes the LARGEST of the add. set is normal, such cubes are suitable for soups and borscht.

- Shredded onions and cabbage with a shredder. I didn't like it ... The cabbage is too thin for borsch, some kind of porridge is cooked from such a cut. The onion is also not that, wet-thin + uncut whole scales come across if the bow falls on its side in the receiver. Bullshit. I will chop the onion into cubes (I did not decide which ones are small or medium) and I will also chop the cabbage into cubes (I also did not decide, large or medium). Who does this, tell me which cubes were eventually adopted ...

-On a grater for frying carrots and beets. Fine. Although I used to use a larger hand grater. I'll get used to it.

I didn't chop greens for borscht with anything in Fillet - in the summer I froze them by hand in reserve ... so there is no opinion ...

In general, the borscht will now be square. My men agreed ...
***Chop cabbage for salting also did not like it. The preliminary opinion is true. For the same reason: thinly + where a piece fell in the receiver - uncut leaves slip. Salted, let's try how it is. Salted with apples. I cut apples into slices with another device .... It should be noted that a head of cabbage weighing 5.5 kg is a difficult task for Phillips. Overheating. For him, smaller volumes are fine, but based on the power, this is to be expected. Why, shredding is not the strongest side of Phillips ... Maybe cucumbers with radishes for okroshka and crumble salads. Cabbage for salads is great. Cabbage: for borscht, salting, stewed cabbage - I wouldn't do it ..... Onions either with my hands or into cubes (if cubes fit into the dish) ...

In general, the cubes at Phillips rule! ... If only I worked for a long time ..... I am delighted with the cubes ... especially the small ones (they are 7.5 mm), in Olivier ..... untold beauty!