Philips HR 1659/90 blender cuts (pros and cons)

I tried it. Grated beets and carrots. It turns out with thin strings. Not bad. But you still need to look for a small one. The cubes are ideal for soup, but large for salad. I cooked borsch and I am happy)
Congratulations on the new thing !!

Uraaa) grilles will appear on sale tomorrow))) finally) if I have time to buy before the New Year, I will make an Olivieja with a cube of 7 mm))))) there is no end to happiness ...))))

And where are the bars promised?

in the online store of phillips it is written from tomorrow they will be delivered to the warehouse of the grill, which means that they can be ordered) for 1790

Bliiin, such a dear nyasha ... Maybe there is something cheaper, but so that he also chopped into cubes and whipped?

Here, on the previous page.

......... It would be better if I bought a VITEK VT 1480 blender - a cube cutter, a full analogue, and there are also three replaceable discs for shredding, instead of one, and a potato grinder, and a whisk - in general, a complete set and all this en masse for 5 thousand

[Cvetaal]

Cvetaalwhat news about your blender? What did the workshop say? Have you repaired or replaced?

[Rita]

Rita, repair of the blender was postponed for family reasons, wrote in a personal

I also bought this blender 1669) Cuts well into cubes, quickly so)
Only all the same it makes noise, my daughter was scared of him ((((Or maybe he shouldn't make noise? And it seems to me that he does mashed potatoes, like ordinary blenders ... for my daughter, such mashed potatoes still have to be diluted with milk or water to make it thinner.

What about mashed potatoes? And what is it doing in this 1669 blender? There doesn't seem to be a nozzle for mashed potatoes, right?

Unfortunately, you will have to buy (((

Hello everybody.
I look - it turns out everything is not so bad. In general, a year ago, the father-in-law and the mother-in-law purchased HR1653. And then we were very upset that we didn't take the cube cutter. And now I see - Philips has released a separate accessory - the HR7969 cube cutter. This is exactly what you need!
And even I understand that he also has replaceable nozzles.
The question remains - where to get all this in Ukraine.

I continue to test, no, already use the blender completely.

On December 31, a salad was made .. naturally, Olivier. My son-in-law prefers it to everyone else. Due to the long stay of guests in my house, 7 liters of the son-in-law of happiness were chopped up. My mother's mouth opened when I cut these very liters in front of her in a matter of minutes. She was greatly surprised and, one might even say, shocked by what she saw.

For other salads - again hard cheese, walnuts were chopped - in a small chopper, the nuts turned out just fine. As I love, there is taste and smell, but the nuts themselves are almost invisible. I couldn't do that in a mortar, there were always large pieces of walnut. And in general, the holiday turned out to be a very good test for the blender. I did everything I could with its use. I have never regretted the money spent. The machine pleases. I would like to hope that it will work for a long time.

I just can't think of what to knead with a hook, what is included ...

I don't test, I just use this device - I also cut all the ingredients for Russian salad for my loved ones in minutes! Hands would have had to cut half of the "Irony of Fate" ......

I continue to test, no, already use the blender completely.
I just can't think of what to knead with a hook, what is included ...

Dough for crochet dumplings or noodles.

Dough for crochet dumplings or noodles.

And also for making shortcrust pastry for multi with a jellied pie. Small volume, the very thing

The pancake dough was made with this large hook. Okay, nothing splatters.

She cut the Braunstein sausage. Fast, but somehow non-sandwich. Maybe you need to practice? 2 loaves were choked up - did not notice

Yesterday my boys suddenly wanted Mimosa ... Ordinary, standard .. Well, they wanted it - I did it.

Grated potatoes and carrots with a disc. I like it. There is practically no waste. I rubbed the squirrels too, I didn't like it here - there is too much waste, not rubbed parts. In this salad, in my opinion, there should be a uniformly grated mass. Well, there were a lot of eggs - they ate all the ugly ones. With the yolks, I did it easier - in a small chopper and slightly twisted it with a knife. The crumb turned out to be wonderful, the main thing is not to twist too much, otherwise it starts to stick together.

Well, then, everything is as usual, in the container fish, potatoes, carrots, eggs, yolk, layered with mayonnaise ... They ate almost in one sitting, barely dragged the last three pieces into the refrigerator. And again they ask, they will have to run again tomorrow for potatoes.

Girls, there are no photos, because they didn't even let it brew properly - they started to burst after a couple of hours ...

Thanks for the hook ideas. I thought about the pancakes ...

Girls! My husband - my concern - gave me a Philips 1669/90 blender with cubes for the new year. Well, I can't get used to it, my conservatism is so strong (10 years of using Brown) that this thug's novelty does not take a shower. I want to sell - out of sight, as they say, so that I no longer suffer from remorse either before my husband or before the blender ... Are there people who want to buy a new product for 5.5 thousand? (my husband bought in Technoshock for 7 with a tail on December 31). +7 921 9401083 Natasha

You need to go to another section - the flea market.

Girls! My husband - my concern - gave me a Philips 1669/90 blender with cubes for the new year. Well, I can't get used to it, my conservatism is so strong (10 years of using Brown) that this thug's novelty does not take a shower. I want to sell - out of sight, as they say, so that I no longer suffer from remorse neither before my husband, nor before the blender ... Are there people who want to buy a new product for 5.5 thousand? (my husband bought in Technoshock for 7 with a tail on December 31). +7 921 9401083 Natasha

Here with sales

The grilles finally delivered to me))) they are so cool) I sit looking at the triangles, I already want to cut something interesting with them) a triangle of 15 mm each side, well, small and large grilles, of course) pusher for cubes 2 in a set - for small cubes and for triangles. To my shame I can't catch up with how to post pictures here ... I would have laid out the gratings, suddenly someone is interested in watching live, so to speak, it helps me when choosing a technique, there is one thing in the picture, but live is completely different)

Hello girls !!! I read your reviews yesterday and bought myself such a wonderful blender today! Now I started using it and noticed a breakdown ... probably ... the fact is that I have a large bowl when it is closed and works it does not fix with the lid itself normally, that is, I close it where it should be, but when I work it opens very easily for me too all the work you have to hold the lid so that it does not open while the blender is running ... do you have the same? or it should be fixed normally there, maybe there should be some click ... Please tell me what to do

When the blender leg is inserted, the lid will not open, just as if the lid is not closed, the leg will not fit into the lid.

Yes? And I have a leg inserted in the blender, it works fine, but the lid opens all the time you have to hold it ... could it be such a marriage?

possibly marriage. I think that for security reasons nothing should be opened during operation.

In the evening, my husband and I figured it out a bit, in general, when you turn on the slicer or shredder, insert your leg, the bowl with the lid itself is blocked and does not open during operation, and when you turn on the dicing attachment, insert the leg, then the bowl with the lid will walk not blocked
Girls!!!! Help me please!!! Look at yourself, you can open the harvester with a dice cutting attachment by turning it a little, or should it also lock and not open during cutting ??? Otherwise, I don’t know what to do, whether to go to the service center tomorrow or not ...maybe this is the model and there is simply no provision for blocking the combine during cutting with cubes ... although this is somehow not logical ... Very much your answers !!! Thank you!

In the evening, my husband and I figured it out a bit, in general, when you turn on the slicer or shredder, insert your leg, the bowl with the lid itself is blocked and does not open during operation, and when you turn on the dicing attachment, insert the leg, then the bowl with the lid will walk not blocked
Girls!!!! Help me please!!! Look at yourself, you can open the harvester with a dice cutting attachment by turning it a little, or should it also lock and not open during cutting ??? Otherwise, I don’t know what to do, whether to go to the service center tomorrow or not ... maybe this is the model and it simply doesn’t provide for blocking the combine during cutting with cubes ... although this is somehow not logical ... Very much your answers! !! Thank you!

when you cut into cubes, then you do not need to install the leg, and the lid is normally blocked.

Yes, you need to first lock the lid, and then insert the blender, and nothing moves.

There must be a blockage while the blender is running. You just changed the nozzles, but yours is no longer blocked? It means service.

During the operation of the blender, everything is blocked for safety, you most likely have defects, which is very unpleasant. But it is better to eliminate them under warranty and continue using the blender with great pleasure!

Girls thank you all for the answers))) In general, today I went to the service, they looked there for a long time and said that there was no breakdown, it also works when the nozzles for slices and shredders, the combine is blocked during operation, and when the nozzle for cubes, in this model there is no blocking, when I cut soft products, the bowl stood still, and when I cut raw potatoes, the knife probably pushed it, and the lid slid off a little. To make sure once again whether I have a marriage or not, I went to another hardware store, and there I looked at the same blenders, looked through 3 pieces, all the same ... I just realized that the manufacturer had not provided just a lock here, I see none of you had such a question, so it is convenient to use ... Today I cut boiled vegetables, they are softer, it worked fine, the lid did not come off ...

I also cut raw vegetables for vinaigrette: potatoes, carrots, beets. The lid stands firmly, does not even twitch anywhere. I did it on purpose this morning, pulled it in all directions - dead.

Everything should be tightly blocked and not leave at all, there is an obvious marriage, this should definitely not be

Change the unit to a new one, what you describe is a breakdown and you don't need to be a specialist here. And about the service centers, when I bought a new coffee grinder and it was smoking during my work, I was also told in the service that there was no breakdown, it grinds coffee !!! Has scandalized - changed.

It's strange ... And I already thought that everyone had the same, but why then were there the same blenders in stores, I checked ... Girls, maybe the point is that there can be different assemblies? I have it written on my leg that it’s Polish, maybe Hungarian? I know that there is still a Chinese one, but it should be even worse ... Or maybe the fact is that I bought in Ukraine, I understood that you are all from Russia?

I also do not spin anything, everything is firmly fixed for cubicof, I bought it in a Ukrainian store.

I also have a cube cutter nozzle and the bowl itself is fixed easily and is not fixed tightly. But the cutting attachment itself, where the knife is spinning, does not open, it is locked tightly. When I cut cubes, it does not bother me and does not cause inconvenience.

This is what I meant !!)) Thanks to SSvetik, I wrote more clearly than I did))) I also have a cube cutter attachment itself fixed with a lid tightly, but with a bowl - no, it can easily open during operation, while the truth is not yet opened, but I always find fault with everything, maybe you just didn't pay attention to it ...maybe I won't have any problems with this, I just bought a new device, so I wanted everything to be perfect)

Cube cutter nozzle + lid + cup - everything is fixed tightly, nothing moves. cannot open during operation. This is how it is with me. It seems to me that it should be so, it is a security issue.

I tried, without removing my legs, to open the bowl when I shredded the cabbage and it got stuck in the hole. I got some figurines. Until the leg was removed, nothing opened.

but with a bowl - no, it can easily open during work, while the truth has not yet been revealed

When I need to empty a container that has filled to capacity, I take off the entire top assembly without even removing my leg (I turn off the power supply before removing it with the button of the extension cord where the blender is plugged in).
Not in use - it can be easily removed, but it is during work that it is the joint with the bowl that does not open, does not crawl, everything is firmly fixed.

And with my leg stuck in, nothing comes off, maybe it would be easier? Although, every time pulling from the outlet is also not ice

I tried, without removing my legs, to open the bowl when I shredded the cabbage and it got stuck in the hole. I got some figurines. Until the leg was removed, nothing opened.

I'm too lazy to disassemble all this, I normally remove it from the bowl and put it back on - no problem.

And with my leg stuck in, nothing comes off, maybe it would be easier? Although, every time pulling from the outlet is also not ice

I specifically bought an extension cord for such purposes with turning off each outlet separately - with a button and I don't have to drag anything back and forth

So, something I have already begun to doubt, can I have something wrong with the blender?
No, that's right. But it doesn't jump.

Is it true an extension cord with a button for each outlet? Three holes and three buttons? Or I didn't understand

So if you shred cabbage, then the lid and the bowl are fixed tightly - the same was written by Alesya888. You don’t shred cabbage on a cube cutter. Now I watched a special video on YouTube, it looks like everyone's cube cutter opens easily.

[Maxxtro PRO PWS-05K]

Is it true an extension cord with a button for each outlet? Three holes and three buttons? Or I didn't understand

5 sockets with 5 buttons!

Maxxtro PRO PWS-05K

So if you shred cabbage, then the lid and the bowl are fixed tightly - Elena wrote this too. You don’t shred cabbage on a cube cutter. Now I watched a special video on YouTube, it looks like everyone's cube cutter opens easily.

And where is the cabbage
There was a complaint about the cube insert - what scrolls on the bowl in the process
Or have I misunderstood?