Philips HR 1659/90 blender cuts (pros and cons)

[Mistletoe]

Mistletoe, cool shredder, the most is in size and not large and not into a mess, like my Boshik 4657 (grater g ... but). I somewhere in blenders showed a shredder from 1377, and they are exactly the same for these blenders. I'll look now.

Oksanochka, I remember exactly that I exhibited shirts of grated vegetables, but in what topic I can't find, if necessary, I can do it again in the evening.

[Catwoman,]

Catwoman, Have you already received the puree accessory? Can you share your impressions in comparison with Kenwood?

[Catwoman,]

Catwoman, Have you already received the puree accessory? Can you share your impressions in comparison with Kenwood?

Rita, not yet, the service was told that the nozzle was already sent to them, they should receive it soon, I'm also waiting.

[Lena]

Oksanochka, I remember exactly that I exhibited shirts of grated vegetables, but in what topic I can't find, if necessary, I can do it again in the evening.

Lenaif not difficult. One is enough tablets pictures. And then I'm all in doubt .. or buy a shredder for Bamiks or him. Doctors to me, doctors.

Oksanochka, I remember exactly that I exhibited shirts of grated vegetables, but in what topic I can't find, if necessary, I can do it again in the evening.

I don't know what exactly is meant, maybe we are talking about this, then here:

She promised to take photos, look and decide if you need it, I bought it for the cubes:

[Lena]

Lenaif not difficult. One is enough tablets pictures. And then I'm all in doubt .. or buy a shredder for Bamiks or him. Doctors to me, doctors.

Go shinkana, wait.

Yeah, Eugene found my pictures with slicing, now I'll show you a shredder, shredded zucchini.

[Linen]

Linen, thank you! The size is really what you need !!! I'll think.

I can shinkatut for a change on a boshik, but there gishants are obtained.

Oh, I forgot, you can order a leg for mashed potatoes from 1655/90 to him in the service.

No, not on Boshik. Here I would figure it out.

I can shinkatut for a change on a boshik, but there gishants are obtained.

Oh, I forgot, you can order a leg for mashed potatoes from 1655/90 to him in the service.

Elena is much larger than the size of the shredded in bosha?
The leg is expensive, did you order it yourself?
If it doesn’t make it difficult, let me know - I can’t see it myself yet - the Internet happens for periods

Elena is much larger than the size of the shredded in bosha?
The leg is expensive, did you order it yourself?
If it doesn’t make it difficult, let me know - I can’t see it myself yet - the Internet happens for periods

On Boch it is much larger, I tried once and put the shredder aside, and the second is very fine, almost porridge. I ordered a leg via the Internet at Nab. Chelny, 2050r is the leg itself + shipping. If everything grows together, then I will give a link to that service and the data of the little man, I liked the fact that they did not require prepayment, everything was cash on delivery.

In my opinion, Phillips has the most optimal shredder size.

Choi-that I on Monday I brake the leg where the kartopelka will be mashed - in that small special glass?
I don't risk it in other vessels
the only thing I don't like about filipka is a small amount of cooked

Choi-that I on Monday I brake the leg where the kartopelka will be mashed - in that small special glass?
I don't risk it in other vessels
the only thing I don't like about filipka is a small amount of cooked

Loremia, of course not, you fasten your leg for the puree to the motor and you make the puree right in the saucepan in which you cooked, you don't need to transfer it to the glass.

Here I am slowly thinking "cheesecake"
I was worried that the leg would be damaged
Thank you, Elena for the clarification
Do you make milkshakes too? I am somehow more accustomed to a stationary one, here in thought whether to buy or not ... The old one recently broke down due to the length of service

Girls, please write the capacity of the chopper in this blender - not the one with the cubes, but the second.

Girls, please write the capacity of the chopper in this blender - not the one with the cubes, but the second.

about 0.4 l.

about 0.4 l.

wow, not enough of course, but considering that I have a 1l bosch mum chopper - I think it's okay, thanks)
I have such

wow, not enough of course, but considering that I have a 1l bosch mum chopper - I think it's okay, thanks)
I have such

In a small chopper, you can grind the onion into minced meat, well, little things, the child can eat mashed potatoes 1 time, no more.

[Catwoman]

Catwoman and in what do you grind larger volumes? In 1379, a big chopper?

[Catwoman]

Catwoman and in what do you grind larger volumes? In 1379, a big chopper?

Seftima, I have a Phillips 1371, he has a chopper for about 1 liter, and I bought it in the service even in the service, from 1377 a large chopper with a knife and graters, so in it I make the minced meat, cook once, etc. It turns out that I have 3 grinders: from 1659 (small), from 1371 - more and from 1377 - large. For all occasions.

According to the symptoms, it seems that a tooth (or several) is broken at the gear in the gearbox, which is located in the lid of the dice tool. It (the gearbox) does not seem to be collapsible and disposable (it is not for nothing that it cannot be washed, the grease is washed out). Try to change under warranty, but not the fact that it will work. Don't say you cut raw vegetables. Say that only boiled ones and such a misfortune happened, maybe they will change. Good luck.

Eugene, the instructions say - cuts raw and boiled vegetables and fruits into cubes. Therefore, we must change and so.
Friends gave me this device for my birthday too. I tried the cubes right away - I chopped the vegetables very quickly. And in general I liked the blender very much.

Eugene, the instructions say - cuts raw and boiled vegetables and fruits into cubes. Therefore, we must change and so.
....

Dot, don't you know that the main task of a warranty repair engineer is to refuse warranty repair, for any reason. Therefore, it is better to immediately play it safe and declare, they say, "nothing but soft, boiled vegetables was used." Yes, and all the same, they can make a decision that "the damage was caused by improper operation ...". They even manage to write a conclusion on their cell phones that they are drowned, if the autopsy was not carried out in front of your eyes. So, what luck it is.

[Evgeniy]

Evgeniy, these engineers have strange problems. Just do not understand how this can be beneficial to the "warranty" engineer? And the manufacturer?
In my filipka I "checked", a shredder, a leg - everything works fine. It remains to check the chopper.

[Evgeniy]

Evgeniy, these engineers have strange problems. Just do not understand how this can be beneficial to the "warranty" engineer? And the manufacturer? ......

Dot, I will not arrange an educational program about the "benefit"; whoever wants to know will always find it. And, in general, the topic is not about this, so that I am finishing the discussion on the topic of repair so as not to produce offtopic. Best regards, Evgeny.

I brought you a photo of the nozzle and a couple of photos to compare with Keshik:






I ordered the attachment from Phillips 1655. It fit perfectly. I ordered it on July 18 and received it today.

Elena, can you please, addresses, passwords, attendance
How much does it cost, where exactly to go to order in Chelyabinsk? I also want to buy such a mixer attachment for my wife.

[Linen]

Linen, there are fewer holes in it, I look. Then write down how this will affect the result or not. Good?

And I forgot to congratulate. CONGRATULATIONS! With potato grinder

Elena, can you please, addresses, passwords, attendance
How much does it cost, where exactly to go to order in Chelyabinsk? I also want to buy such a mixer attachment for my wife.

Eugene, I ordered in Naberezhnye Chelny via the Internet at a price of 2050 for the attachment, 230 for sending, and plus for transferring money, since they are sent by cash on delivery, you do not need to pay anything in advance. I'll throw the link in a personal.

Lenochka, congratulations on your purchase, in general, a necessary thing in the household. Unsubscribe how she is at work, and if you walk on boiled potatoes with your usual foot, will it be the worst option compared to a potato grinder? A tangible difference?

Melanyushka, I don't know, I haven't tried it, but they say how the paste turns out. And of course I will unsubscribe based on the results.

I confirm that a paste is obtained with an ordinary foot, I tried it. And what, this attachment fits directly to the motor unit of the "cubic" blender? then I probably need it too))) and know what else is mounted on this motor

girls .. cute .. pod Please show me, I really want this model, I am confused by the small volume of the chopper (which makes the onion puree)! Today I called the service center, they told me that you can pick up a knife in a large cup under it (or a large cup with a knife under it)
please tell me is it true? whoever ordered?

I confirm that a paste is obtained with an ordinary foot, I tried it. And what, this attachment fits directly to the motor unit of the "cubic" blender? then I probably need it too))) and know what else is mounted on this motor

Venetian, so I specially photographed her cube strapped to the motor block, everything works and attaches perfectly!

girls .. cute .. pod Please show me, I really want this model, I am confused by the small volume of the chopper (which makes the onion puree)! Today I called the service center, they told me that you can pick up a knife in a large cup under it (or a large cup with a knife under it)
please tell me is it true? whoever ordered?

Raceria, I won't tell you about the cube, because I have not met a large bowl, but having Philips 1371 in the service I ordered a specially large bowl with knives and graters from the 1377 model, but she exactly will not fit in 1659, the mount to the motor is completely different.

Venetian, so I specially photographed her cube strapped to the motor block, everything works and attaches perfectly!

Yes, I was worn out, looked at the photo, and did not understand - how I have a motor unit or another, they clarified it, thanks))) and I went to see what other attachments there were, I feel that a new exacerbation of device addiction awaits me)))

Yes, I was worn out, looked at the photo, and did not understand - how I have a motor unit or another, they clarified it, thanks))) and I went to see what other attachments there were, I feel that a new exacerbation of device addiction awaits me)))

You can buy a frother.

but only this type of blender cuts into a cube? Or can you see an alternative?

I called the service head office in Moscow today .. I asked about the possibility of picking up an additional cup of a changer with a larger volume than is included in the set, they said "THERE IS OF COURSE!"

tomorrow I'm going to buy a cube !!!!

but only this type of blender cuts into a cube? Or can you see an alternative?

I called the service head office in Moscow today .. I asked about the possibility of picking up an additional cup of a changer with a larger volume than is included in the set, they said "THERE IS OF COURSE!"

tomorrow I'm going to buy a cube !!!!

Razeria, don't forget to share later on how to buy a larger chopping bowl. The Bosch harvester cuts into cubes.

You can buy a frother.

I'm in italy, we're in that cappuccino !!! does the nozzle work?

but only this type of blender cuts into a cube? Or can you see an alternative?

I was looking for a device with a cube at one time ... Mulinex has in the combine - cubes are ugly and finally, Bosch has a combine, but there are a lot of complaints about the quality of this particular model, and only this blender with cubes. And, even to the expensive Kenwood, they say it came out with prefixes on cubes, but it costs like an expensive blender, and you can't find it on sale

I'm in italy, we're in that cappuccino !!! does the nozzle work?

I don't need this attachment, I said it for information, suddenly someone really needs it.

[Venetian]

I'm in italy, we're in that cappuccino !!! does the nozzle work?

Venetian, but isn't it easier to buy such a thing for foam:

In Rome, bought for a penny. Surely there is something similar in Venice.

a today I received a letter in the mail:

"Good day.
This model comes with the largest bowl volume for
grinding. Philips does not produce other bowls. therefore
there is no such possibility.
Thank you for your cooperation."

bad of course .. but still buy this cube

[Venetian]

Venetian, but isn't it easier to buy such a thing for foam:

In Rome, bought for a penny. Surely there is something similar in Venice.

I don't see the photo ... That's why I'm asking if the nozzle works well., that maybe you can get by with something simpler, here in one topic Ikeev's gadget for milk was praised ... But in fact it's all a whim, and still I'm at home I will not do this cappuccino, given our number of bars))) It's worth thinking about the potato maker, of course, it's not an emergency device, but, on the other hand, if the motor unit is already there ... and it was even worth taking one cube to add to it. And I also actively drive the shredder.

Rituyla! Congratulations! Now order the puree attachment to the full.

I am thinking about this question! But the price of 50 euros stops me for now.

Thank you girls for the congratulations!

take me into your ranks bought today stewed zucchini with onions and carrots, cubed on it, very quickly. zucchini only into 4 parts cut lengthwise to get through. in the end it turned out a little juicier than usual. probably a smaller cube. I'll go back to chopping the chief salad, it's a little larger. but for blanks - an irreplaceable thing!
really liked the chopper that's what I was missing in the kitchen
I am very pleased
I won't buy a potato machine, I'd rather buy a Philips HR1616 / 00 with ozone. he costs 2050 rubles there

[Catwoman,]

I will not buy a potato machine, I would rather buy a Philips HR1616 / 00 with ozone. he costs 2050 rubles there

Also today in the store I was spinning this blender in my hands. We have 56 euros. If you buy, then I will have this third blender, so I want a nozzle.

Catwoman, please tell me, is this nozzle one-piece or consists of two parts? Today I was looking at the instructions and something got confused ... And how does it work, have you already tried it?

[Catwoman,]

Also today in the store I was spinning this blender in my hands. We have 56 euros. If you buy, then I will have this third blender, so I want a nozzle.

Catwoman, please tell me, is this nozzle one-piece or consists of two parts? Today I was looking at the instructions and something got confused ... And how does it work, have you already tried it?

Ritual, the nozzle consists of two parts, with holes and an adapter (the part that attaches to the motor), so the nozzle itself can be unfastened and washed in the dishwasher. I haven't tested it yet, if it's very urgent, then I can test it tomorrow. I bought this attachment only to free the shelf from Keshik, since I used only a potato machine in it, and the whole shelf is occupied.

[Ritual]

one nozzle more expensive than a blender will come out, I have already looked

I'm afraid of this!
Happy shopping for you !!!

Ritual, the nozzle consists of two parts, with holes and an adapter (the part that attaches to the motor), so the nozzle itself can be unfastened and washed in the dishwasher. I haven't tested it yet, if it's very urgent, then I can test it tomorrow. I bought this attachment only to free the shelf from Keshik, since I used only a potato machine in it, and the whole shelf is occupied.

No, not urgent! But I'll wait for the report! I, too, because of the place, but I feel it will be even more expensive with us, once with an adapter. By the way, this adapter and whisk is put on.

Ritual, if you want, I can take a picture of the nozzle entirely and what parts it consists of, but the pictures will only be tomorrow, now the radical will be loading half an evening.

Girls, I have:
- Phillips cube separately,
- Kenwood with a potato machine separately,
- and the old Phillips, which existed before them.

I will say that I need everything, they have different sized chopper bowls - for different needs.
And then I am a supporter of the fact that for meat - a separate grinder, just one of the three set aside for this business.

I have now moved without a kitchen, the furniture will not be soon, there is nowhere to put everything, but since I kept the boxes from all the new equipment regularly, both new blenders moved - how are they helping me out now !!!

For the night yesterday I cooked soup - crumbled and rubbed on graters - all in 2 minutes !!!
There is no place for cooking, and the Philips Cube is perfectly nestled next to the Cuckoo !!!
Here's how I think - there would be a Bosch cube, no matter how much space he would need to look for in order to rub one carrot.
And I generally keep quiet about mashed potatoes, no matter how tired I am - whack - and the mashed potatoes are ready

So I never tire of rejoicing at my assistants

PySy
The cost of ALL my Kenwood with a potato machine is $ 60
The point is to buy a potato nozzle for Philips-cube for 50 bucks ....?

And I am with Filipk again, returned from repair, the repair was done free of charge. Hope it will last long