Philips HR 1659/90 blender cuts (pros and cons)

Hello everyone!) I could not decide for a long time between the Phillips 77 model and the 1659! Well, all the same, the cubes took their toll!) Well, here's another problem, the official website says the country of origin Hungary and the price is 6990 and in online stores it is mainly written that the country of origin is China, the price is 5990! I want to give my mom for an anniversary, so I'm afraid to buy some kind of fake! who already has this miracle car please tell me which country of the manufacturer is written on the box !?

I bought mine for 5400, the question of the manufacturer was already raised here, but Hungary is written on it, but they still perfectly understand where our equipment is produced - China, so buy and do not worry about the manufacturer.

I have it written on the box: Manufactured under Philips control ... Made in China. Well, now almost all the equipment is made in China, so take it and do not hesitate, this blender is a very good helper. There are probably no fakes of this model yet, or very few, this is still a novelty from Phillips.

I spread the promised 19.03. photo of Filipka and Bosch nets.




Explanations: below is the PHILIPS mesh, above - respectively, Bosch. It was aligned along the rightmost and bottommost row, i.e. these rows of knives coincide. And then there is some lack of synchronicity .. So, there is somewhere not square ... But, I think, in a salad, okroshka, soup, etc. this is not noticeable.

So these are both pictures from Phillips

Nah, julifera! Below is a Phillips detail (black), and on top is a Boshevskaya (in a gray frame, it is removable in Boch). The first photo shows a general view. And on the second, where the knives shine, you can see that he combined in the extreme lower and right rows of knives. The second vertical row of Phillips is slightly displaced to the left of the Bosch knives, the third, respectively, even more. The difference is clearly visible in the photo in the fifth-sixth vertical row.

Can I somehow not clearly describe?

I think PHILIPS has 0.9 cm cubes
And BOSH has 0.8 cm
Or I'm wrong?

Nah, julifera! Below is a Phillips detail (black), and on top is a Boshevskaya (in a gray frame, it is removable in Boch). The first photo shows a general view. And on the second, where the knives shine, you can see that he combined in the extreme lower and right rows of knives. The second vertical row of Phillips is slightly displaced to the left of the Bosch knives, the third, respectively, even more. The difference is clearly visible in the photo in the fifth-sixth vertical row.
Can I somehow not clearly describe?

It reached me !!!
I thought that the word above - means that this is the top photo, and below - like the bottom photo
And this turns out to be on one photo 2 gratings at the same time - Boshevskaya from below, and Phillips covered it so imperceptibly.
I got it

I measured it with a Bosch caliper - 0.6 cm. Phillips from my mother. I'll measure it later.

[0.6 cm]

I measured it with a Bosch caliper - 0.6 cm... Phillips is at mom's. I'll measure it later.

As far as I understand in calipers - in the picture 0,9 cm.

[0,9]

As far as I understand in calipers - in the picture 0,9 cm.

And you need to measure with the antennae of a caliper, which are on top (insert into the cell and push it apart). And so the thickness of the knives falls into the size

Phillips has a cell size of 0.9 cm. True, I measured it with a ruler.

[azaza, P-Eugene!]

azaza, P-Eugene! I beg your pardon! To be sooooo accurate (with the accuracy of this very caliper) Bosch cell size:
Outside - 9.2 mm
Internal - 8.35 mm



Maybe this will help someone, but I think that in salad and soup, as well as in vinaigrette, you won't feel a difference of 1-2-3mm, as well as the size of the knife's thickness

[kolenko]

kolenko, I just have the size on the drum, I already have it and it suits me completely Corrected only for the sake of the fact that someone, perhaps, will be stopped from buying these 0.6 cm, and in the photo he will not see it himself 0.9.

People, help with advice! Choosing a blender, I decided to stay on this model, because I attracted cubes. But then I caught my eye like this ... Here I was attracted by the potato grinder attachment. Tell me, please, can I buy a 1659/90, and then order a potato machine separately for it in the service? Has anyone come across this?

People, help with advice! Choosing a blender, I decided to stay on this model, because I attracted cubes. But then I caught my eye like this ... Here I was attracted by the potato grinder attachment. Tell me, please, can I buy a 1659/90, and then order a potato machine separately for it in the service? Has anyone come across this?

Svetik, I think this is possible, since they have the same motor, you just need to tell the service number of this blender and a specific attachment. I ordered it to 1371, they gave it to me, a large chopper from 1377. At the beginning of the topic, I exhibited photos of the "cube", it has exactly the same motor.

Thank you for such a detailed description !!! I plan to buy one. but there has never been a hand blender.
in this regard, the question is: can they whip an omelet? or is a whisk required in such a case?
otherwise I don’t want to spend 1800 on it just for an omelet

Thank you for such a detailed description !!! I plan to buy one. but there has never been a hand blender.
in this regard, the question is: can they whip an omelet? or is a whisk required in such a case?
otherwise I don’t want to spend 1800 on it just for an omelet

You can beat an omelet without a whisk, everything works out great with an iron foot.

Hello. I also want to buy a Philips that cuts into cubes, but I just can't figure out what is the difference between 1659 and 1659/90

I called one store and they told me that model 1659 does not cut into cubes, but only cuts 1659/90, I called another store (actually where I want to buy) there they told me that they had model 1659. I asked this model (1659) cuts cubes? the seller answered - Yes. I asked if this model has a whisk, the seller answered - Yes.
So what is the difference I don’t understand?

Maybe you drive up to the store and see this blender live, make sure it has a cube cutter for yourself. Sellers on the phone often confuse the completeness of different models, I typed Philips HR 1659 Blender in the search engine - and using the links I shared everything with a cube cutter. It is safer to look at it personally in the store, if there is such an opportunity.

Sellers do not know anything about technology, order with self-pickup, so check it to calm your soul.

Sellers do not know anything about technology, order with self-pickup, so check it to calm your soul.

I bought it Already tried it, I was satisfied
Before buying, I call the Philips service and asked if it is the same model (1659/90 and 1659) or is there a difference, I was told that this is the same thing, that the stores already call it that. I asked which countries are producers, I was answered by China, Hungary, Poland. I got Polish. And at the expense of the whisk, the sellers meant a hook for kneading dough
I bought it through the online store with self-pickup (through the online store it turned out to be ~ 2000 rubles cheaper).

Elena 2012, congratulations on your purchase!
I hope the blender will not disappoint you further, since I bought the same one, every time I pick it up, I feel the joy of communicating with such a great toy-assistant.

I'm sitting here and trying to persuade myself .... I have already persuaded my husband, he does not resist for a long time ... now I have to persuade myself. I am very interested in the question of whether it is possible to buy a large bowl of a chopper for it, or a knife instead of this incomprehensible dough mixer ... and additional graters are very interesting ...
I called the service today, they told me that I needed
ref number and model... then they will definitely say that you can buy it in addition ... well, the model is understandable, can someone tell me the ref number, please. and I will find out what additional accessories you can buy. then I will definitely understand whether I need it or not.
Thank you

I bought a blender yesterday, today I was a little upset ... I used to think that a blender can and can do more) This is my first blender, I don't know, or is it a problem with all blenders? It is impossible to beat whites with sugar for meringue with a foot, it is stirred only until a white homogeneous mass and does not thicken when whipping with a foot, it is also impossible to keep it for a very long time, because the engine is heating up, I'm afraid it will burn out.
I wanted to chop one small onion into porridge, but no matter how hard I tried, only small pieces turned out (and some frankly more than all the others), I opened it ten times and scooped it off the sides with a spoon and mixed it. It's easier to grate one onion by hand))
For potato pancakes, the grater is coarse, but in principle I got potato pancakes (if you break a potato pan, you can see that it seems to consist of stripes). Rubs well, but not grated pieces of potatoes (the ends of each of the pieces) slip through and then you need to feel them with your hands and take them out of the grated mass. The grater is ideal size for grating carrots, or a boiled beet for salad.
The cubes are ideal, they cannot be called large and are cut without any stress. I pushed through the leftovers with a cleaner, then cleaned the cleaner itself with a toothpick)
I put a carrot on a shredder - they turned out to be petals of a carrot (about 1mm), only at first they were in circles, and then as the carrots turned over they became stripes.
There is no big problem with washing the covers, you just need to always remember so as not to accidentally turn over the part that connects to the engine under the stream of water.
By the way, on the engine block - the manufacturer is Poland, and on the box - China (probably they make all the plastic there).
Check all the details when buying, in the store in a sealed box they almost sold us a large cup with broken antennae, if they had not checked it on the spot, then they would not have changed it, they would have said that we broke it ourselves. Many blenders have difficulty opening and closing the lid of a large bowl, it sticks, we chose out of three in the store - one normal one, which opens well (I think the assembly is all Chinese, so whoever is lucky).
The design is beautiful, it is convenient to store, almost all knives are in caps.
There are no extra graters, I think, because the other model has a grater, but it is exactly the same (But the whisk and a knife for a large bowl, I think you can order from that model, should fit.
I'll check the rest of the functions - I'll write.

mouse, do not worry, you will definitely make friends with this blender. The onion can be chopped into small pieces in a small chopper, but the squirrels really cannot be beaten with the foot, here you need a regular mixer with metal whisks, or better, a planetary stationary (well, that's what I mean in terms of review), you liked the graters - it's good, and then adapt to it!
I'm very happy with mine, although before that I also used a very good blender Moulinex MasterShef for quite a long time, now they are completely different, I have somewhere in the 90s of release, somewhere something broke off, rubbed, but it works there too no leg, and Phillips is now my constant assistant in the kitchen.

the protein is really not beaten with a blender, I bought a mixer specially for this purpose, and besides the fact that I beat the protein cream with it, I used it for nothing else.

the protein is really not beaten with a blender, I bought a mixer specially for this purpose, and besides the fact that I beat the protein cream with it, I used it for nothing else.

For proteins, I also have a mixer for 400 rubles, but for the rest of Phillipka, the onion turns into porridge very quickly.
Mouse, I agree with you that you need to look at everything well, when I took mine, at the point of issue the sellers themselves opened the box, got everything out, checked, only then they sent me to the cashier to pay. So I have no complaints about them.

Wow, and I was really upset, I also have China on the box, I didn't even think of looking at the motor.
And here, after the post of the Mouse, lo and behold - and on it the signature of Poland, and that's good

[Diced white cabbage]

Made Olivier salad - cubes are what you need. Rubbed raw beets for borscht -. Grate boiled beets - pieces of un-grated beets remain. Diced white cabbage - super to whom for pies! I love fried cabbage with egg and made a fresh cabbage salad (cubed) with carrots (grated). I am very happy and my husband too

Elena 2012, I am very glad that you were not disappointed with the purchase, you should also try to cut the cabbage into cubes.

I read and read Temka, but still I don’t understand how to be .. I really liked this blender for all its functions ... but the question torments me! what about SMOOTHIE? I mostly use it for smoothies ... the bowl was attached to the mixer, a little truth, which is inconvenient, and it is dying already .. here! so I'm doing a smoothie in a bowl, okay ... of course, maybe I don't understand what, but in this bowl you just beat it with liquid and you can ... otherwise the knives are spinning in place and that's it ...
Save me, I am suffering! Can't you make a smoothie in a large bowl of this blender? just a foot in a glass? write how it is, I am making a liter of smoothie stably, does it bother me to wave my foot? (the bowl itself flops ...

And what is a "smoothie", I'm sorry, I don't know, if you tell me, I may help you.

!

[julifera]

I read and read Temka, but still I don’t understand how to be .. I really liked this blender for all its functions ... but the question torments me! what about SMOOTHIE? I mostly use it for smoothies ... the bowl was attached to the mixer, a little truth, which is inconvenient, and it is dying already .. here! so I'm doing a smoothie in a bowl, okay ... of course, maybe I don't understand what, but in this bowl you just beat it with liquid and you can ... otherwise the knives are spinning in place and that's it ...
Save me, I am suffering! Can't you make a smoothie in a large bowl of this blender? just a foot in a glass? write how it is, I am making a liter of smoothie stably, does it bother me to wave my foot? (the bowl itself flops ...

You will definitely make a smoothie using this blender, you don't want to grind everything with your foot, grind the droppings in a small grinder, pour everything into a large bowl and mix everything, you can mix 2 liters at once, if 1 liter is enough for you, then you can kick in a jug.

Thank you julifera, now I know what SMOOTHIE is.

Tell me how well he chops cabbage and rubs vegetables? (sooooo much I would like to see how he does it in a photo or video) And then I have not yet had this kind of device and I have no idea what it is and "with what it is eaten" ... after all, the device is not cheap and only from - I don't want to take it for some cubes, especially since I really love cabbage and I also need a shredder ...
And what can you do in a "chopper"?

there is a whisk in the kit, where did it go? And can I buy it?

In general, I really need your help, otherwise I broke my head, reading about all sorts of blenders, combines, etc.

Osya, look on page 7 Lena-Koshatnitsa showed a photo of chopping a blender, and on page 8 - kneading dough. I am very happy with the blender, I use it all the time. The girls wrote about the whisk that it was very small, so they could whip up a glass of something, no more. Therefore, I did not order it additionally, if you need to beat the whites - I have a regular mixer with frames, well, there is also a planetary mixer. And I used a cube-cutter and shredded potatoes in soup, vinaigrettes, salads ... Well, somehow he took root with me, as if he had always been in my kitchen.
Decide, of course, you yourself have to. In the store, take a good look, hold it in your hands, it may even be allowed to turn it on, try it in your hands while still in working order, check how it fits in your hand - if your thing, you will feel it right away.
Good luck with your choice!

Girls! Tell me! Thinking to buy or not Phillips 1659.
How does he shred cabbage? Is there a lot of waste? What is the thickness of the largest shredded cabbage plastics?
Does this 1659 blender run loudly?
After how much work time should he be given rest (for example, 3 minutes of work - 10 minutes break?)?
This device is very attractive to me, but some questions remain. Help me decide ...

Hello hostesses!
I reread the whole Temka, but did not find the answer. Interested in the question of purchasing attachments. I was presented with HR 1653/90. The processor unit is the same as in 1659. I would just like to buy a bowl and a dicing attachment, maybe who knows how this can be done?

Girls! Tell me! Thinking to buy or not Phillips 1659.
How does he shred cabbage? Is there a lot of waste? What is the thickness of the largest shredded cabbage plastics?
Does this 1659 blender run loudly?
After how much work time should he be given rest (for example, 3 minutes of work - 10 minutes break?)?
This device is very attractive to me, but some questions remain. Help me decide ...

I didn't chop the cabbage, so I can't say anything, it doesn't work loudly, I didn't notice when to rest, but in Phillips, there is protection, when the engine overheats, it just turns off and until it cools down, it won't turn on.

Hello hostesses!
I reread the whole Temka, but did not find the answer. Interested in the question of purchasing attachments. I was presented with HR 1653/90. The processor unit is the same as in 1659. I would just like to buy a bowl and a dicing attachment, maybe who knows how this can be done?

You can buy a bowl and a nozzle for it at the service center, but at a price it will cost you a lot, go to them and check. I did this with another Phillips model.

You can buy a bowl and a nozzle for it at the service center, but at a price it will cost you a lot, go to them and check. I did this with another Phillips model.

Koshatnitsa, thanks for the prompt response, today I will call the services.
That is, you think it doesn't matter that I have a different model, they don't need the number exactly 1659 for ordering or reporting? The price, I think, is still not more than a whole 1659?

Koshatnitsa, thanks for the prompt response, today I will call the services.
That is, you think it doesn't matter that I have a different model, they don't need the number exactly 1659 for ordering or reporting? The price, I think, is still not more than a whole 1659?

The price is certainly not more than a whole 1659, but it will be around that. You just need to say that you need a bowl from 1659, along with a hook for kneading dough, and all the ingredients for this bowl. I went to the service, the engineer brought me a picture from the right blender and in this picture we marked everything that I needed, I will have to pay for each detail separately. Also be prepared for the fact that they will come at different times. You will be lucky if they bring everything at once. For me, this saga lasted for 3 months. Good luck.

Also be prepared for the fact that they will come at different times. You will be lucky if they bring everything at once. For me, this saga lasted for 3 months.

The main thing is to undertake to deliver, and so that everything you need comes, even if at different times;). Thank you!

PS: I found a service that I undertook to order. Waiting for the price and agreeing

Svetik, I think this is possible, since they have the same motor, you only need to tell the service number of this blender and a specific attachment. I ordered it to 1371, they gave it to me, a large chopper from 1377. At the beginning of the topic, I exhibited photos of the "cube", it has exactly the same motor.

Can you please tell me if a large chopper from 1377 is suitable for a motor from 1659, and is it possible to make minced meat in it (in a large chopper from 1377). And another question: how much did it cost?

[Zhenya1234567]

Can you please tell me if a large chopper from 1377 is suitable for a motor from 1659, and is it possible to make minced meat in it (in a large chopper from 1377). And another question: how much did it cost?

Zhenya1234567, the motor in 1377 and 1659 differs in mounting, so a large bowl with knives WON'T FIT to the motor 1659. And in the bowl to 1377 you can safely make minced meat.So you will have to choose which function is more important for you, a bowl of knives or cubes, that blender and buy, I will not say at the price now, I don’t remember, but for 1659 the price is written at the beginning of the topic.

The girls, the other day I was making okroshka, once again said to myself "thank you" for not sparing money for 1659, okroshka for 3 minutes, a large saucepan.

Thanks for the answer! And cubes are, of course, more important to me! and minced meat for dinner for me and my husband can be done in a small grinder, it’s even tastier and healthier, eat only fresh cutlets)))) On Sunday I buy 1659 and no one will dissuade me!))))

Thanks for the answer! And cubes are, of course, more important to me! and minced meat for dinner for me and my husband can be done in a small grinder, it’s even tastier and healthier, eat only fresh cutlets)))) On Sunday I buy 1659 and no one will dissuade me!))))

I also dream about it, but they have just appeared with us, and they still have such prices !!!

We too! But I don't want to think about it)))) the main thing is positive emotions every day!))

Girls, I welcome you!
Please help, because groundhog day mows me down after work. I cooked it in the shower for 10 minutes and the alarm goes off to work. I can’t figure it out alone.
I read reviews on this kitchen device already countless - once from the winter period. There is a maximum of information collected here, so there are questions for you) I would be glad to receive comments and advice.
This is my first kitchen brainchild, so I choose to find fault and stop myself at every stage of the choice, but every time I dream about phillipka))
- I love to create in the kitchen, but I do everything by hand (force of habit). For a long time already I want to attend to the purchase of an assistant, now I have nothing but a steamer donated a couple of years ago. Several times it was credited - it costs dead weight. The toaster and the antediluvian blender don't count (I mostly use it for pancake dough and cocktails).
- I twisted it in my hands in the store, the structure seemed flimsy (by the way, what kind of "antennae" are we talking about when they say "look so that it is not broken off"?
- Confused by the moment "there is no corolla", I immediately conceived the topic "wait for a new model", but my "patient" is coming to an end and two weeks after returning from vacation I will go to buy, not him, so someone else, focusing on your advice
Whisk = pancakes and aladushki, cocktails, hmm? ))) Or are there no problems with mixing? (who makes the dough for what dishes? for how many people?)
- Is it possible to make ice for a cocktail in this miracle?
- Is it worth buying a mixer if I get a phillipochka?
Girls, help)) And I will still write to you with questions

Pys:
I use my mother's rice cooker and bread maker, but I don’t want to buy myself a million devices stuffed with duplicate or later unclaimed functions. Advise pzhl what to stop your eyes on (you can link to topics), I usually cook soups, salads, meat dishes, pasta, and occasionally baked goods, when I’m at my mother’s place, we don’t have an oven yet.
For sim, I take my leave and anxiously wait

we have this Phillips 7000 (or rather 6999) in Eldorado. nowhere else. but I already want it, so by the fall my husband will calm down after buying a combine, I will buy it