Ice cream maker Clatronic ICM 3225

This topic is dedicated to the Clatronic ICM 3225 ice cream maker
First impressions:
Made to last.
It is quite quiet in operation, the presence of a drip tray is pleasantly pleasing.
I liked the bucket very much, it felt like you could make several portions for one freezer. No hints of the separation of the gel were observed.
True, it lay in the freezer for 2 days. I made ice cream for about 30 minutes, then in the freezer for a couple of hours.
The only minor negative. this is the latching principle of the top cover.
It’s somehow not very conveniently done, while you catch these grooves, and you still need to turn to the right. and the move is very short, so much that it is not clear whether it was fixed or not.
But this is nonsense, the lid does not come off and this is the most important thing, so I'm happy. in Ukraine it cost me 350 UAH delivery. Here you can watch my video.

I have the same. I am very happy with it !!!

And I have the same The whole family is happy, my ice cream is tastier than the purchased one

I now want to display my maximum recipe for loading, so that there would be a full bucket at once.
And then all the recipes are somehow small in volume.
Can anyone share a proven recipe, preferably coffee.

I looked after this ice cream maker for myself. Such a compact, while the power is good. I think for two people and one dog it will be the most.

Dear owners, tell me, please, are you still satisfied with this unit or are there any shortcomings?

I don't like a little dyurochka into which ice cream is poured, it is too close to the motor and its dimensions could be a little larger. If the mixture itself turns out to be thick, then pouring it there is very difficult. And so 15W against 6 is felt. Twists until thick.
In the top post, I exaggerated too much about reusable uploads.
Maximum two and even if the mixture has cooled well.
Sorry ..... if you let anyone down

I don't like a little dyurochka into which ice cream is poured, it is too close to the motor and its dimensions could be a little larger. If the mixture itself turns out to be thick, then pouring it there is very difficult.

I have never tried to pour the mixture into this hole, the maximum flavoring agent dripped into it. I pour the mixture into a bucket, and then I close the top with a lid and go.

Today I prepared ice cream for the first time in Klatronic. The test machine was excellent. I made an ice cream on gelatin and it seemed to me that if you put the bowl in the freezer for a couple of hours, you could use the ice cream maker twice.
Thank you all very much for the detailed reviews, the thing is just great

Makhno, please give me a link to the online store where you bought the ice cream maker (I didn't find it so cheap). Thanks in advance!

[Lydia 777]

Lydia 777hopefully Makhno will not be offended that she climbed. Here is the link 🔗 on ice cream makers

[natalisha_31]

natalisha_31, thanks a lot!

I ordered the same for myself

and I have the same.
Yesterday I did this in it: cream 10% + condensed milk (by eye) - it turned out delicious (last time I did the same, only boiled condensed milk - just as tasty)

And I never bought myself an ice cream maker. I will definitely buy it by the spring.

Hello Clatronic owners! Today they finally brought it to me too. Immediately after reading the instructions, the question arose: is it absolutely impossible to wash the bowl under the tap, or will it be possible, if it is careful? And then it is written to wipe with a damp cloth. It seems to me not quite serious, she will still come into contact with food. Thank you.

Something I have not seen in the instructions. It seems to be written that you cannot wash in the dishwasher. And under the tap, I bathe the bowl like an ordinary saucepan.

Something I have not seen in the instructions. It seems to be written that you cannot wash in the dishwasher. And under the tap, I bathe the bowl like an ordinary saucepan.

I quote: "Clean ... as well as the inside and outside of the tank (with a slightly damp cloth moistened with water without any cleaning additives."
So I ask. So you can, if you are careful

I quote: "Clean ... as well as the inside and outside of the tank (with a slightly damp cloth moistened with water without any cleaning additives."
So I ask. So you can, if you are careful

Xenia, I wash it with a tap, and then wipe it with a towel and that's it!

Xenia, I wash it with a tap, and then wipe it with a towel and that's it!

Yeah, Len, she did. Already in the freezer. You know my epic with an ice cream maker

Yeah, Len, she did. Already in the freezer. You know my epic with an ice cream maker

Tomorrow will you please your ice cream? Have you got the waffle cups?

Tomorrow will you please your ice cream? Have you got the waffle cups?

What cups are there. They are already tired of waiting for ice cream, they will crumble and so, without entourage

The ice cream maker is super.

What cups are there. They are already tired of waiting for ice cream, they will crumble and so, without entourage

Xenia, what about the ice cream?

Xenia, what about the ice cream?

Flax, I just made frozen yogurt. But with him such a movie came out. I put it, which means that the bowl should be frozen overnight. In the afternoon, the next day I think - I will turn on the ice cream harder, so that the bowl will cool down better. Well, I turned on .... the refrigerator. The daughter noticed only when the bowl began to thaw quickly during kneading. Here. That's all for now. Today the guests were spontaneous, but there was a desire to do ice cream.

Tell me, pliz, is it possible to wash the bowl (tank) of the ice cream maker with dishwashing detergent?

Good day. Wanted now to buy Clatronic ICM 3225 in Carousel. There is no warranty card. They said that the guarantee for the check is 6 months (. I haven't bought it yet. Someone faced such a situation or is this the norm?

I bought it in Auchan, they said the check guarantee - 1 year. The instructions say: 24 months warranty from the date of purchase. The cashier's receipt is a warranty card

Thank you. happy with your purchase?

There is a certain sense of security. The volume is too small for four. The instructions say no more than 700 ml, although there is 1 liter on the box. It's true, you can't put it anymore. Crackling loudly. It interferes well. I made a classic ice cream from Anastasia three times in a row. Delicious.
In my opinion, an ice cream maker accounts for 20% of labor costs, the main thing is a mixer, and of course a freezer.
In general, I am satisfied

Hello!
Just the other day we bought an ice cream maker, and while the result is so-so, the consistency of liquid sour cream is obtained, not ice cream. I read the forum - it looks like we have a "no ice" refrigerator. It really is old, apparently it does not give out -18 degrees.
And such a question in connection with this - how to understand that the container / tank of the ice cream maker has really cooled down properly in the freezer? After 12 hours at -18 degrees, what should it be? Does the refrigerant freeze or is still bubbling? Should a wet hand stick to it or not?

The refrigerant should not gurgle. A wet hand sticks to the bowl.

Thank you!
It was high time to change the refrigerator.

I don’t understand something - does the ice cream maker freeze itself or not? If not, then what is its meaning, the same can be done with a mixer / blender? Sorry if the question is stupid

I don’t understand something - does the ice cream maker freeze itself or not?

itself

Hello, good people! Finally I got an ice cream maker too! I made ice cream according to the recipe from the instructions. It turned out to be real ice cream: airy and tasty! Very happy with the purchase!

Today I received the Clatronic ICM 3225 ice cream maker and started to check if the whisk is working, but the timer does not spin and everything seems to be inserted according to the instructions, but the whisk is dead, I try to twist it with my hand like it is glued or it doesn’t work.

Today I received the Clatronic ICM 3225 ice cream maker and started to check if the whisk is working, but the timer does not spin and everything seems to be inserted according to the instructions, but the whisk is dead, I try to twist it with my hand like it is glued or it doesn’t work.

The drive has a pip at the bottom. Plug the plug into the socket, start the timer and press this pip, it should twist. The fact is that the cover can be installed in three positions, but only in one the engine will work. The arrows on the cover and body must match.

[Jefry]

Jefry Thank you for the quick response I plugged in the plug, started the timer and pips pressed the silence: pardon: only the quiet sound of the timer, but I really wanted ice cream

In general, I tortured the ice cream maker, the whisk does not spin in any way, it’s a shame in our city in the ice cream shops.

[Slastena]

Slastena, and the spindle (it is numbered 5) fits well into the motor housing? It is necessary to enter all the way and click. And then put on the stirrer.

[Lydia 777]

Lydia 777 spindle should click try no click

[Slastena]

Slastena, well it is necessary to push it in so that it enters completely, before thickening.

[Lydia 777]

Lydia 777 I try to push in there are no clicks anyway, and the spindle with a nozzle can be easily pulled out

[Slastena]

Slastena, I do not know, I have it tugenko comes in and with a click. For the first time I put the spindle on the agitator (as it is written in the instructions), but the spindle began to fit tightly into the motor socket, I was afraid to break the agitator and began to insert the spindle first, and then the agitator. You still twist the lid back and forth, it is necessary that the triangles coincide on the lid and on the tank. Maybe today is not your day. Try it tomorrow. Let it work out! Good luck and patience to you!

The day is definitely not mine, but I do not despair, just my spindle enters and exits so easily like clockwork and another question, when I insert the spindle, the gap remains as it should

There should be no gap! The spindle must fit snugly! Is there a foreign object in the nest? Maybe something horrible?

there is no foreign object, I do so the engine casing, then a plastic cover, then a spindle, now I put it on to the end without gaps, it works tightly, but it is flimsy and very easily inserted, and it does not work all the same conclusion I have a marriage

[Carefully]

Calmly assemble the entire structure in order: electric drive-lid-bucket. Tune in that with the new device everything should be in order, and for you, out of habit, most likely something does not work out. It may be that the lid is on, but the motor does not work. Carefully we read the instructions and put the lid on the bucket exactly as indicated in the instructions. If it still does not work, then we carefully collect all the spare parts, pack them in a box and hand them over to the store, change them to another, and be sure to check the operability when buying.
The son somehow dropped the electric drive and also only the timer worked, but the motor. There was a good service nearby and for 80 UAH. everything was repaired for me.
BUT I advise you to calmly and carefully understand. With new devices, such tricks are

and the spindle (it is numbered 5) fits well into the motor housing? It is necessary to enter all the way and click. And then put on the stirrer.

It's not about the mixer, when the motor is running, you can hear it without it at all, and when not, only the timer ticks quietly.

there is no foreign object, I do so the engine casing, then a plastic cover, then a spindle, now I put it on to the end without gaps, it works tightly, but it is flimsy and very easily inserted, and it does not work all the same conclusion I have a marriage

And on the contrary, I first connect the spindle and the mixer (a fairly stable design is obtained), and then I insert this design into the engine. Slastena, can you have a loosely connected spindle with a stirrer? And it turns out that the spindle does not move the blade.
And yet, are you doing all this with an empty bowl or is there ice cream in it? Maybe the ice cream has already frozen a lot during this time and does not allow the scapula to move?

If there is no reaction when the timer is ticking and the pip is pressed, carry it back, let it change. And check the new one on the spot using the same method.