Kenwood bread maker problems and breakdowns

Hello! Help!! A few days ago I bought HP VM450 on the display on the opposite of the "dough rise" icon there are numbers 1, 2, 3 indicating the stages of the rise, should they be lit on all programs or on some specific one? I baked bread on 1 program, the numbers do not burn, is it a marriage?

the stages of the rise of the test are displayed there not in numbers, but with icons, but in numbers there first the program number, and then in the process only the remaining time. That is, first the number 1 should appear, and after a few seconds and all the time the stove is operating, the numbers with a countdown should be lit - on the 1st program from 3.15 to zero.

Today I tried to buy a Kenwood 450 bread maker for the third time, during the check in the store thick smoke poured out of it, the sellers got scared and began to reproach me for burning the stove. Quote from the seller: "We don't have to check its performance here, but only so that the indication burns. You first buy it, and then sort it out yourself as you wish. Otherwise it will burn out here, what will we do with it?" We spat and went home. To be continued)).

We do not have to check its performance here, but only so that the indication is on. You buy it first, and then sort it out as you like. Otherwise it will burn out here, what are we going to do with it? "We spat and went home. To be continued)).

I admire your persistence and desire to buy Kenwood, I would not have resisted and bought Panasonic
And the fact that it burns is not your problem, for that there is a repair and return to the supplier

Thanks for the answer. The numbers represent the stages of the ascent. kneading or kneading only on your favorite program. It's good that I figured it out, otherwise I wanted to take it back to the store

On the 4th attempt, I managed to buy a normal, working stove in a new, unopened package. It does not rattle, does not burn patterns on the bread and does not go into the astral plane. Happiness!
By the way, I had a suspicion that these noisy stoves are due to the fact that the buckets are not fixed tightly, and the mixers are dangling. I managed to find a copy in which the bucket is fixed tightly - so it is not at all noisy.

Tell me please)
A week ago I bought a Kenwood BM-260 bread maker and in some modes I encountered such things:
1) on mode # 6 (cake, IMHO cupcake), the oven heats up a lot and, as a result, the cupcake turns out to be on the verge, ala "a little more and would start to burn";
2) began to notice that it was after baking the product in this mode (6) that the edge from the lid on one side began to turn yellow
🔗
🔗
🔗
🔗
🔗

Has anyone come across this? does it have to be?
in general, other programs produce delicious bread

Tell me please! I baked bread and not only in Kenwood BM-450, everything was fine. And this dough began to "float". I changed the flour, at first it turns out a good bun, and gradually, when kneaded, it spreads. What could it be?

I have such a problem: Kenwood-450: the amount of grease in the place where the bucket is fixed in the bread maker began to increase, and today the HP stopped working. Is this bucket leaking? Run to the service? It's a shame the warranty is over.

Good day. I have a big problem. I have a Kenwood 450 - touch pad. Cockroaches live in the apartment. When the oven heats up, they run somewhere. And they crawl under the glass and die there. The question is how to get them out

Good day! I have a Kenwood BM260. I bought it in June this year. I can't say that I bake very often, once a week I baked a loaf. Sometimes there were two - I still did it for my mother. I have not tried to do any unusual test yet. Yesterday, when loading on the usual first program, the program started as usual, the dough was mixed, I heard.But after 3.50, at the signal of the end of the program, I took out a mold - raw dough instead of bread. The walls of the stove are cold. but usually I had to take out the uniform in mittens. What is it? The heating element is covered, right?

[Ir4i]

Ir4i Only service will give you an answer to this. Maybe a heater control relay.

my husband made out, teng is dead, in short. I ordered a new one, wait a week

Good day everyone! I was given a used Kenwood 250 without instructions. The problem arose of this kind: about ten minutes before the end of baking, the stove seemed to "fly off" the brains (all settings disappear from the display and dashes and sticks start to run), while the oven, after the time set by the program, does not turn off on its own and, as It seemed to me that the baking was going on (you can hear the heating heater turning on). The instructions downloaded from the Internet say that after the end of baking, the oven automatically switches to the heating mode for 1 hour, and after this mode it should automatically turn off. I take out the bread after the end of the program, but I have to set the time on the alarm clock. Tell me, maybe I'm doing something wrong, or should I wait another hour for the heating mode to end?

I also have kenwood 250, but so far everything works. Brains do not fly off and should not. After the end of the set program time, the display will show zeros. And the end signal sounds. The bread can be taken out immediately, or after waiting for an hour, the oven keeps warm. And if there is something with a display - this is most likely a service, or under a guarantee for an exchange.

Hello ... my stove is already noisy at work, during the kneading there was an additional rattling ... moreover, during baking, the rattler turns on, turns off ... so maybe several times per program ... What does this mean?

Good day!
I had a problem with Kenwood VM 250. She baked and baked for more than six months, and yesterday the cat dropped a bucket from the stove from the table. And today it is not fixed - that is, it fits into the oven only diagonally and does not turn anywhere, while it is easy to remove it. It used to be that you insert diagonally and turn, and it stands straight and cannot be removed in that position. I looked - it looks like it usually looks from below, I don't understand anything. help advice

Hello everybody! I'm a beginner) I just choose a bread maker) I stopped at several manufacturers) I was interested in the BM 900 model stove. Who can say what? still interesting, it has a steel case, how much does it get hot externally during the cooking process? and how noisy is it? or maybe even quiet? I want to give as a gift, plus we have a tiny child) I want to be quiet and reliable))

Hello dear users of KENWOOD BM450 bread makers! Please tell me who knows:
We bought this model on 01/03/2013. We are very satisfied with the stove. It bakes great. But yesterday we decided to bake bread according to the 3rd program, where there is preliminary heating before kneading the dough.The stove turns on, the preheating indicator lights up on the display, but it does not warm the ingredients - the ten is absolutely cold !!! Is this normal, or is the bread machine defective? is it worth changing it while there is time? I don’t want to carry it to the service - they will harm it for a long time and even more than they will fix it (I have encountered it more than once in various warranty services).
On one of the forums I already read about this problem with two users. Can anyone come across, please write. Thank you!

I called Kenwood service today. As it turned out, they are also DeLongi. So, after a long consultation there, I was told that everything was normal. Pre-heating in a bread maker does not mean heating the baking mixture, but heating the bread machine itself (to what temperature and under what conditions they could not answer). A couple of times he asked if they understood me for sure - they assured me that they did. Well, in general, I calmed down that it was not a marriage.

Hello everyone!
Help, tell me, please!
I have a Kenwood 450.
That thing, the pin) that connects the motor and the blade began to fall out and take out, water flows through it and in general ...
What to do? repair or new bucket?
Thank you.

If under warranty, repair. If the warranty is over, a new bucket.

If under warranty, repair. If the warranty is over, a new bucket.

Thank you, it's over long ago ((.

Another question is, will a bucket from the 350th model to the 450th fit?

New Bucket for Kenwood BM350 / 450 Bread Maker
🔗

Old model Kenwood BM350 bread maker bucket
🔗


Which one you have I don't know

in the 450th I have 4 rivets, and in the 350th - 3, as in the pictures.

Otherwise, look, on the left there is a thick base without hooks, on the right with hooks. Get the bucket out and take a look.

here in my hands is exactly the same as on the right, new, model 450. And there is still I don’t know which one is from the 350, with three rivets).

Here is what you need new. Or a new HP

Here is what you need new. Or a new HP

Thank you, consoled), I wanted to make one of 2, no luck. Thanks for your help, sorry to bother you!

Hello everyone!
I'm in mourning
I phoned half of Moscow - there are no buckets KW712245 anywhere and, they say, may not be.
Tell me, please, if you know how to solve this problem, well, don't buy a new HP!

The link that I gave was asked? They work with all of Russia. Alternatively, bucket repair https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=32099.0 https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=36855.0
oil seal brand Kenwood450 size 8x19x8 "Zhejiang SHANGYU Seal Oil Co., Ltd." (China of course) https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=32099.40

The link that I gave was asked? They work with all of Russia. Alternatively, bucket repair https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=32099.0 https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=36855.0
oil seal brand Kenwood450 size 8x19x8 "Zhejiang SHANGYU Seal Oil Co., Ltd." (China of course) https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=32099.40

Thank you. Those links, as I understood, for Peter, should be in Moscow.
I will begin to study the repair option.

[Lady]

Lady They deliver within Russia: Express mail EMS Russian Post: All Russia
Prepayment. Delivery cost: Moscow region: 400 rubles; All Russia: from 550 to 900 rubles

[Lady]

Lady They deliver within Russia: Express mail EMS Russian Post: All Russia
Prepayment. Delivery cost: Moscow region: 400 rubles; All Russia: from 550 to 900 rubles

Thank you very much for your responsiveness, I will think, there is enough information for thought).

[Lady]

Lady Did you find an official service in Moscow? They should definitely have
Representative office in Russia
De 'Longhi S.P.a.
125267, Russia, Moscow,
st. Chayanova, 15, building 5
De'Longhi office
Service department: (495) 250-62-96
Marketing department: (495) 250-61-67
Fax: (495) 250-62-80
🔗
🔗

[Lady]

Lady Did you find an official service in Moscow? They should definitely have
Representative office in Russia
De 'Longhi S.P.a.
125267, Russia, Moscow,
st. Chayanova, 15, building 5
De'Longhi office
Service department: (495) 250-62-96
Marketing department: (495) 250-61-67
Fax: (495) 250-62-80
🔗
🔗

Alas, part of the list had phoned before, the rest of the addresses have now been checked, dull.
I will proceed from reality, thanks again.

There is an unnecessary bucket from kenwood bm-250 new who needs to contact, I will help as much as I can. (Old sample 3 screws)


I myself am looking for a shovel sown somewhere.

Moscow.

Hello everyone!
Today I received a bucket from St. Petersburg, but not to 450, but to the 250th of a new sample, it is 12mm lower.

🔗

After filing the hooks for fastening, it came up fine, I'm already baking the first loaf.

Dear forum users! For the second time while kneading the dough, a creak from the Kenwood 450 oven is heard :(,
What can it be, the stove is only a month old, I bake h / w day, sometimes b / w 2 days?

What happened to you will be told only by the service, especially since it is under warranty.

Hello everyone!
Recently, my "turntable" in the Kenwood VM450 bucket broke and I had to replace it (the bucket). Nobody wanted to repair the old one, and I screwed a suitable bolt with a smooth head into the hole in the bottom of the bucket.
Now baking without kneading is obtained without external flaws!)

Help me understand what happened !!!!!
I made dough in a bread maker, without baking. Only 3 sets. It was always ok.
And today, when kneading the dough, the convector turned on, and when the stove turned off, the dough had crusts - as if it was starting to fry.
What happened to the bread maker?
??

I am terrified! Help me figure out what it is?

girls can tell me, my bread began to turn out, very light up. and the roof is falling ..... damn it, is it really broken?

good day! just got a kenwood 900, tried to bake some bread, but half the loaf was just unmixed. I may not have fully worn the stirrer. but I do not have the strength to insert one of them to the ground. Can you please tell me that both the stirrer and the bucket should be put on and off with effort? Or is it some kind of breakdown?

The kenwood900 bread maker has been doing an excellent job with its work for more than 10 months, but a problem arose, the fan does not work, maybe someone disassembled I would like to see this process, I disassembled mine there is a temperature sensor dangling on two wires I can not find where to insert it?

Hello) The topic has not been updated for a long time, but I'll take a chance. I hope someone will respond)
We bought Kenwood VM366, brought it from the store and, on the advice of the sellers, checked its performance. poured water and checked how it heats up and mixes. At first glance, everything is fine, you can try to bake something. But one moment confuses ...
Maybe I'm just making this up ... The side panels and the back are rattling. It’s not that they are electric, but it’s some kind of "electrical" rattling, and it starts right away, as soon as it is plugged into the network and did not even start any programs.
Maybe this is how the motor works .. or don't risk it and take it back to the store?

Hello. I have hp Kenwood bm 250. I set the white bread mode, the time is 3:13, I press start and it jumps for 58 minutes, and so on with almost all programs. what to do?

[puff]

puff, Contact the service, as an option, a new HP.

Hello. I have hp Kenwood bm 250. I set the white bread mode, the time is 3:13, I press start and it jumps for 58 minutes, and so on with almost all programs. what to do?

I understand that my advice is late. But suddenly someone else has such a problem. You just press the wrong START button !!! START - small button. Do not touch the big one and you will be happy. I am not kidding.