Kitchen machine Kenwood (2)

[Tatyana]

Tatyana, thanks for the tip
If you have the opportunity to describe some details in more detail, with photos, describe what and how you do on your CM, many will be grateful to you for your experience.
At least we don't have a detailed description of Prospero here.

[Olga VB]

Olga VB, well, I will describe.
I'll try when I'm preparing to film the process.

Girls, can anyone tell me which attachment to use for shredding cabbage? I used disk number 5 of the food processor, attachment number AT 647, something I didn't really like. Maybe there is a better attachment for Kenwood 053 chief?

Girls, can anyone tell me which attachment to use for shredding cabbage? I used disk number 5 of the food processor, attachment number AT 647, something I didn't really like. Maybe there is a better attachment for Kenwood 053 chief?

340 high speed shredder

[Abricosca]

AbricoscaWe have a topic about attachments and accessories for KM Kenwood. There are many unforgettable moments dedicated to shredding cabbage for borscht, for pickling, for stewing, for pies, ...
I clean it up slowly, there are no links on the first page yet, but try to scroll through the topic from the beginning - you will find everything.

[Olga VB]

Olga VB, Olga can clean up a little here too .. so that there are fewer pages and about the main thing ..

[Olga VB]

Olga VBThank you, I'll take a look, I'm not very familiar with the topics yet.

[Olga VB]

Olga VB, Olga can tidy up a little here too .. so that there are fewer pages and about the main thing ..

Zhenya, absolutely!
But this is all not as fast as I would like: I have been sitting for days, but so far I have not even cleared the topic of attachments. In the same place, it is necessary not only to remove empty messages, but also to group useful information by different attachments, methods of their use, etc.
You have to read all pages several times, shuffle information, edit messages ...
Now I get about 1 page out of 10, but these 10 must first be subtracted so as not to miss important information, redraw, remove false information, remove unnecessary repetitions, but here we have the same questions asked all the time, i.e. . it is necessary to return to the edited one, check again what was there and what was not ...
In general, it doesn't work out fast.
At the same time, I'm trying to think over which topics should be in the thread, how to reshuffle messages on these topics ...
Then it will be necessary to bring the links to the 1st pages, that is, to subtract everything again
So I'll get to this topic, gradually.
By the way, someone will have suggestions, what topics do we need in the Kesh thread? What to divide, what to combine, and what is not to be discussed here at all?
Here we are discussing KM models, and attachments with accessories, and how-what-for what to use, and recipes, and where to buy what, also JVs periodically arise ...

[Olga!]

Olga! You are doing a great job! This is a huge work, thank you for this !!!

[Girls!]

Girls! Urgently! What kind of dough attachment to make on custard cakes?

I did K-shkoy.

[Ksenia]

Yeah, got it! Thank you, Ksenia,

[Natusichka]

Natusichka, I also do K-shaped

[Natusichka]

Natusichka, I only do flexi

[Natusichka]

Natusichka, do you mean eclairs or shu?
Here are my yesterdays
https://Mcooker-enn.tomathouse.com/index.php@option=com_smf&topic=155709.0
I boiled water in a kettle, right in the cache, until I decided for some reason. Added oil and salt. Temperature at 100 degrees and until boiling, if I'm not mistaken, took 5.5 minutes; stir at min speed. Then she lowered the temperature to 85 and added flour, boiled for another 3-4 minutes. turned off the temperature, when the temperature dropped to 60 - started adding eggs one at a time, kneading by 1-2.

[Natasha,]

Natasha, I want to make profiteroles for my husband on DR .... Is this the same recipe as it seems to me?

Flexi is it AT 501?

Yes, you just have to put it in a "bunch" or spread it with a teaspoon

Hello girls. I'm new, registered with you for advice. I have a question for you.
I want to buy a car but I don't know which one.
If there is no debt, there is an opportunity to buy Kenwood KHH326Multione
or Kenwood KMC 570, but this one will have to go into debt ..... is it worth it?
I need a meat grinder, a kneader for steep dough and a blender and shredder cheese, vegetables, etc. and so on .... I will use it very often ..... 2 times a day or even more often.
in the store they persuaded to multiion, they say that 570 is only show-off for a lot of money, but I doubt that.
Girls, please tell me about their cars who have such, share the pros and cons ... maybe there is something in between that I did not notice ...
in 570 attracts a potato peeler and an ice cream maker) and for the pasta press
I will be very grateful.

[Girls!]

Girls! Urgently! What dough attachment to make on custard cakes?

I do flexi.
I boil water with oils right in Kesh (set it to 140 °). I pour in the flour. I turn off the heating, and when the temperature drops to 70 ° (during this time the dough has already gathered in a "dumpling" ;-), I drive in the eggs one at a time.

[qwerty2016]

qwerty2016, so you need to start the topic. All these more than 400 pages are dedicated to this.

[qwerty2016]

qwerty2016, but do not want to share in MVideo, for example? There seems to be a sense for the attachments. The girls here praised him.

Thanks for 400 pages, I think I'll read it by next year
in a nutshell who has multione 326 what are the pros and cons
and who has 570 pros and cons.
I read Temka a little bit, unfortunately I don't have much time - children, husband, work, cooking, cleaning, etc., etc.
thanks for the advice anyway)

[qwerty2016]

qwerty2016, but do not want to share in MVideo, for example? There seems to be a sense for the attachments. The girls here praised him.

Girls, I'm from Ukraine, we don't have a MVideo store.
we have everywhere that on the office site that there is one price in stores, I found site 2 where it is cheaper, but with a dubious product and a guarantee ...

[qwerty2016]

qwerty2016, I cannot competently answer (I have induction), but the appearance of the hook attachments 570 is more stable, and the body is metal. So the weight is more. This is important for kneading tough dough - a light machine will "walk" on the table. But this is just my reasoning
And on the Kenwood page these cars are in completely different classes ;-)

Again, depending on what to start from. When I bought my cache 020, I proceeded from the fact that I would buy additional attachments later, that is, I initially took a powerful combine. As a result, I chose between 020 and 060, they differ only in that in 060 the blender has teeth on one of the pair of knives. Since the blender is not very important to me, and the other characteristics do not differ, I took 020.
I am very pleased with the choice. He kneads the thick dough at once, malt bread too, the dough for muffins and biscuits is just super! Sometimes I don't even separate the whites from the yolks, they whip together.

This is important for kneading tough dough - a light machine will "walk" on the table. But this is just my reasoning

I agree. I would also take a more powerful and heavier apparatus.

: bye: you see, they have a difference in weight, 326 platics and 570 iron. both have a power of 1000, but from the 570 you can buy attachments and it has 3 drives, and the 326 has 2 drives and you can't buy anything else for it. but the price is almost 2 times (glass blender.
I just wanted 326 at first, it was not very expensive for us, but I found reviews that the base of the bowl broke down very quickly, and the whisk erased the metal coating from the walls, and the juicer is not very ...
I was thinking about who you have these cars ..
Girls about 020 and 023 for me are just space at a price (

and who has 570 pros and cons.

I have 570 - only one plus! A bowl of 4.6 liters for a family of 3 is enough for me. He has only 2 nests - there is no medium-speed one, but now they are releasing new KAB nozzles - they go to a high-speed socket (the same processor) I bought it without additional nozzles, and gradually I bought some, a blender, a meat grinder, flexi, a rubbing sieve, At 340 and a cube cutter.

[qwerty2016]

qwerty2016, we have almost one price, but 326 with a bunch of attachments, and 570 almost without.
In my opinion, it is better to take the best device "naked" without attachments (I did it myself), and then, if possible, buy more than take a bunch of worse quality.

I had 570. I was very pleased with him.I changed it to induction just because I wanted to and a good option turned up. I did not even consider cars below the 570 series. From time to time there are negative reviews on them, but I haven't seen them at 570 and higher, maybe I was looking badly.))) Although no one is immune from marriage.

girls .. tell me pliz .. to Kesha 010 a bowl of ikea that fits .. it was shown here or look for in the topic about nozzles ?? 7

[Zhenya]

Zhenya, these are the Wispad bowls

Now I specifically looked at the prices. 570 costs 39,900 rubles. I bought my cash for 38 tons. Maybe you should search online stores? Maybe in big cities with delivery. There should be girls from Ukraine, maybe they will tell you.

[julia_bb]

julia_bb, Julia, thank you! understood ..
must then order ..

[Zhenya]

girls .. tell me pliz .. to Kesha 010 a bowl of ikea that fits .. it was shown here or look for in the topic about nozzles ?? 7

Zhenya, these are the Wispad bowls

Zhenya, take your time.
As far as I remember, these bowls were attached instead of large ones, that is, on the KM of even series (020/040/060/080 ...).
Therefore, we ask those who have 4.6 l bowls to write their opinion about whether these VISPADs become small cars.
Or at least tell the outer diameter of these bowls and the standard bowl of 4.6 liters, so that you can compare and make at least a preliminary conclusion.

qwerty2016, no one other than you will use your purchase and, accordingly, no one other than you will be responsible for this purchase.
You now have no time to spend time studying important information for you, but at the same time you think that others should spend time on you for the hundredth time and take responsibility for your choice.
You yourself understand yaki pennies - such a product.

You were absolutely rightly advised to familiarize yourself with the entire topic (or rather, the entire branch) in order to see the largest number of opinions, and based on this, make the most optimal choice for you.
As far as I can summarize the general opinion, then, indeed, the absolute majority (girls) believe that with a limited budget it is more correct to purchase a "naked" CM of the highest possible class for yourself (optimally - all-metal), and then, if possible, buy nozzles for it.
Of course, this is a rather expensive purchase. But there are other CMs of decent quality with your chosen set of functions, while completely metal and even heated, but much cheaper than Kenwood.
For example, take a look at CM Bohmann / Klatronic. We have a corresponding thread on the forum.
Good luck!

[Zena]

Zena, Olga VB, many here wrote that these bowls are not in Ikea. We definitely don't have ((

Now I specifically looked at the prices. 570 costs 39,900 rubles. I bought my cash for 38 tons. Maybe you should search online stores? Maybe in big cities with delivery. There should be girls from Ukraine, maybe they will tell you.

if you translate into hryvnias it comes out the same as ours We do not have such an amount (we either need a loan or will take an installment plan.

in any case, thank you girls, you helped me to dispel my doubts.
we in the store spoke the language so that it makes no difference that this is all nonsense, that 326 and 570 are the same in power and quality.Just no one knows such things, so I wanted to find out who is using it)

[Zena]

Zena, Olga VB, many here wrote that these bowls are not in Ikea. We definitely don't have ((

We don't have them either, I asked and said that instead of them there are now others, they are wider and with a lid. There will be no more wispads (((

these are the Wispad bowls

Girls, do they exactly fit machines with a 6.7L bowl?
Or do you need to twist the nozzles?

And then I'm right at the low start in Ikea

[Natalia]

Natalia, you don't have to start. We, at least in Khimki, do not have them either, and I have been hunting them for half a year, so for sure. Ksyusha upset me straight out that there will be no more of them, we need to find out from the sellers. I was going to tomorrow.

[qwerty2016]

qwerty2016, look, this I finished writing for you.

NataliaMasha Masinen wrote that they are getting very good and there is no need to tweak anything, she even posted a photo, - look 2 messages in a row in the topic about attachments. But then she still bought an additional standard bowl. Why would

Who else has an opinion on this issue?

Now, like, these Wispad are no longer released (?).
In any case, you need to look, when you pick up something, so that both the base and the top are no larger in diameter than the bed allows, but not too much atso that the rims on the walls do not beat.
I'm happy with my spare tire, although I don't use it often. It normally interacts with the whisk and K-shank, but if you need to collect something from the walls with a flexi-nozzle, then, of course, their geometry does not match.
Good luck!

We don't have them either, I asked and said that instead of them there are now others, they are wider and with a lid. There will be no more wispads (((

that's always .. so ..
all the time I come and the door is large CLOSED !!!

You know, virgins, on our website Ikeevsky writes that as many as 94 pieces are available in the store in which I asked! Well, how to understand this ?! On the weekend I'll go, I'll go look for a manager .... I really want to find out "is the patient more likely to be alive?" ... Or who will go first, find out, eh?

[Ksyu]

Ksyu, we also have in stock as many as 70 pieces for tomorrow promise. I'm going to torture the sellers. I will report tomorrow

And we still don't have them (((

But then she still bought an additional standard bowl. Why would

And the chest just opened)))
Yes, it's just more convenient with your own))
BUT! For not having a native, you can pick up)

I was puzzled by this question. How can I make a heated biscuit in Kenwood WITHOUT induction? I don't have a hand mixer ... Maybe someone has already come up with such a trick before me?

[Anya]

Anya, you heat the eggs with sugar in a saucepan over the fire, until the sugar dissolves, stir with a whisk. Then pour it into Kesha and beat as usual.

[qwerty2016]

qwerty2016, in my opinion Olga VB is very right in suggesting that you pay attention to other manufacturers. Buying Kesha you pay for the brand ;-)
Last year I started to systematically bake rye hearth bread. That is, the dough is very heavy.
Since I did not know how long I had this hobby, I decided not to spend money on an expensive car. Bought No-name for 150 € all metal + glass blender. 1200 Watt. I didn’t regret it! OK. 2.5-2.7 kg of heavy dough was kneaded "without bargaining."
Decide for you - is it worth taking a loan to pay for the brand?
Purely my opinion