Kitchen machine Kenwood (2)

Eletics sent me everything by the transport company (attachments), and by Lu - by mail. There is a minus - for a non-cash payment + 3%, for delivery to a transport company - 500 (it seems) rubles, well, for a transfer by mail - also%. Some companies do not take money for non-cash, but otherwise, I was lucky with them, I was looking for 970- and just accidentally found them. And they reserved it to me and sent it ... And about the nozzles ... I think, if you have a high-speed grater - AT 640 - it may not be so necessary ... Although - a knife in a blender - the girls wrote - to make carrot caviar I didn't want to, but this knife, in 640, I think, would have done it. If, for the money, it’s expensive, it’s better without him. Then, try, get used to the car (I turned it on with apprehension for a long time, suddenly, what was wrong, but for that kind of money), well, decide what exactly you need. Than Kenwood is good, you need to take it, but you don't need it .... If you work with the dough, you can't do without rolling-970, well, etc. according to the list. It's easier for me to work with transport companies than with mail, there are, of course, moments, but more often than not, the cargo reaches us in 4-5 days. Mail ... well, this is our mail. I write about the blender straight from the book-that AT337, that AT338, that AT339-all 1.5 liters. The difference is one is acrylic, the other is glass and the third is metal. Unfortunately, there are a lot of errors on the sites, they copy from each other without looking ..

Swallow, look at this ...
the price is 18650.
I had complaints about this Eletiks. In my opinion, it is very simple to solve them: call there and ask (demand) to make mandatory packing in a box, in addition to the Kenwood brand.
Be sure to reflect this requirement when ordering through the Internet, then you will have the full right to make claims and they will definitely take this point into account.
Otherwise, there are no complaints about them. We sent the goods without delay, high quality. In the end, Autotrading can also make packaging, but in my opinion it is expensive. Call, check on the Autotrading website, there is also an Anapa phone number. Please note that with this campaign, you need to discuss everything to the smallest detail. When delivering the smokehouse, they tried to cheat me twice, first they unloaded me in Krasnodar and wanted to arrange delivery from Krasnodar, which increased the cost of delivery by 2 thousand rubles, then Matroskin Kot was presented with additional packaging in Moscow, although it was not required. After my scandals, they decided not to contact me and did not include in the price either packaging or delivery in Moscow. Be sure to check in the store whose transport the goods will be delivered to before Autotrading, so that you will not be charged twice.
P.S. I was not charged 3% for non-cash, everything went according to the price on the site.

I wrote to them, they called back, well, that's all I asked them, they answered that for bank transfer-3%, before that they did not send anyone at all, and Lyudmila was already the second, they did not even take a% from her, so that you should be even more lucky - they have already practiced on "cats"

No, they are hassle-free. Were, if not conceited. In the accounting department, there was such a pleasant girl ... I wanted to find the address, apparently deleted it ... But, you can just write, they will answer, for sure. Well, you can, for a start, just indicate the phone number, without an address ... So that, for sure, they called back. They wanted to deliver me straight away, but then ... all the same, they delivered

[matroskin_kot]

matroskin_kot
Irina, on the website Eletiks delivery only in Moscow and the region. How did you and Lyudmila agree on the delivery to another city? I liked the price of their 971 and 972 nozzles. I would like to order from them.

Tanyusha, you probably also have an Internet Explorer on your computer, if you go from another browser (in my opinion, Opera or others), delivery to the regions is shown there.
But, be sure, specify the packaging, write right where the order is in the comments. Still risky they sent me without another packing box. After all, Kenwood boxes are not sealed and can be slipped there while they go, whatever for weight. As a result, no one will be held accountable for this.

Many thanks to everyone for the answers, tips!
I will definitely try to take everything into account

About delivery and prices.
as they ordered a child car seat in Germany. came out much cheaper even with delivery. They sent by mail. But DHL went across Germany, and our mail was already across Russia.
The weight was 10 kg, the jar was about the size of a dishwasher 45. Everyone's eyes looked up when I received it
So the delivery cost only 1200 rubles.
It's a pity you can't order the harvester, the duties will be

People! Does everyone have dough rollers for 1 and 2 working louder than for 3-8, or is it just me? And the backlash is small, but there is during work. That is, hard, like a glove, my rolling does not fit into the nest. I wonder if this will not affect the operation of the whole machine in any way? Well, will it break any bearings?

[Irochka]

Irochka , specially went, tried rolling. Yes,: yes: indeed, at 1 - 4 thickness, it works somehow loudly. True, I tried it without a test, at idle. The thinner the dough is rolled, the quieter the nozzle is. But that's how it is with me. But when I tried the nozzle for Lyudmila, then (it seems to me), I somehow did not notice the difference in sound (noise). Perhaps I did not pay attention to it then. Let's wait for the girls to write. And, of course, there is a backlash, as in the meat grinder. I don't think anything can happen to the car from this. Since there is a backlash in all machines and this could not be overlooked, in the production where KM is produced.

Ira, Tanyusha!
Since today I've been making dumplings all day, I answer: There is a rattling noise on the rolling 1-4, but not the machines, but the rolling rollers.
There is a small backlash, the thought itself also flashed as if something could not be damaged. Moreover, in the morning I did potato pancakes and rubbed potatoes with great effort.
It did not work at all on the main pancake grater, I had to remove it, I was afraid that I would destroy the "nest" with my own pressure, then I did it on a fine grater, it was also difficult, for a long time. I would have rubbed it by hand faster.
In general, I am not happy with the low-speed grater. Well, only plates and a coarse grater rub on it, my old combine rubs faster and without such efforts.
Then I'll try high-speed. (So to speak, I stretch the pleasure for a long time)
But with all these machines I begin to feel like a WHITE person, I stand, and they work.
Although it took half a day with dumplings, they sat down and ate almost everything.
I WANT A DUMPLING MACHINE. (If honey, then with spoons).
P.S. I have a separate Kenwood meat grinder, there is no backlash, it stands like a glove, and if I insert it into the socket of the nozzles, a slight backlash appears.
Perhaps this is still a Kenwood flaw.

Just about, it is the rollers that make a rattling noise. They seem to rub against the base of the nozzle, and even if you listen, then a little with a creak. But this is all without a test. I have not tried my dough rolling yet.
And I checked your attachment, Lyudmila, one might say on the move (at night). And at this moment I did not pay attention at all. I was so fascinated by the work of the attachment, it was like a new toy in a child.

I still am not overjoyed at rolling out the AT970. Rolls out dough wonderfully.
Yesterday my sister and I made noodles for future use. And in order not to change the rolling for cutting noodles, the manual Titania Empire took advantage of it. There I have 2 cuts for 7 and 4 mm. It turned out just a conveyor. I rolled, she cut directly into the grates of the dryer. It would be possible to cut AT971, AT972 and not buy.
Output of dry noodles from 500 gr of flour -600 gr. Moreover, the flour is the most common, no expensive varieties of high hardness. Hence the flour was spent for 10 rubles + 5 eggs for 20 rubles. Total 30 rubles, the cost of 600 grams of delicious noodles. If we assume that there are 400 grams in packs, then a pack of such noodles would cost 20 rubles. Here's the savings, and without any unnecessary additives, and VERY tasty.

Girls, can anyone tell you in detail about the disks in the A 340 attachment, what number is what (what vegetables) and how is it chipped?

And here I’m sitting and wondering where to attach my brand new hand-held Titania Empire. After all, it also aimed at 971 and 972 nozzles. There was a very great desire to try Titania Empire in the work of cutting noodles, but I just keep thinking, but then how to sell it (it seems like it won't be new). When we bought this machine at METRO, we tried how it cuts on a sheet of paper. I read somewhere about this method of verification. So, she coped with the paper: yahoo: excellent. But I'm afraid,: girl_red: that I alone cannot cope with a manual machine when cutting noodles. After all, the dough must be served on rollers, turn the handle from the machine, but what about the already cut noodles? After all, it will fit right under the machine, then there is no third hand to stretch the noodles forward. It turns out that you will have to make noodles with someone else. Think about it, whether to spend another 7 thousand on the purchase of two attachments, or to cope with the Empire. And to spend these 7 thousand on yourself, LOVE.

[Tanyusha!]

Tanyusha!
You can calmly handle it. If there is a very long strip of rolling, cut it across, or immediately cut a piece of dough of the required size for rolling.
The last time my sister and I came to the conclusion that it is necessary to cut across to the length of ordinary vermicelli. All the same, after drying, it breaks down and is obtained without cutting of different lengths, and so is the standard.
You screw the Empire to the table, below you substitute a chair, on a chair from the drying rack, the finished noodles fall there by itself without any of your efforts. You turn the handle with your right hand, the left hand puts the rolled dough strips. This is despite the fact that I still can't roll out by hand because of my sore hand.
Then it is very convenient that you do not need to constantly change the attachments on Ken: rolling and cutting.
Good luck.

girls, I want to buy kenwood 010. Only a blender comes with it. And since I have a separate meat grinder, a good Russian one, and in principle I don’t need a meat grinder, explain who has this model. Is the meat grinder not attached to any attachments? Then I want to buy all sorts of attachments and I'm afraid to find out that some attachment does not work without a meat grinder.
Please, girls who have this model, please answer.

I have 10, it came complete with a blender (glass) and a meat grinder. Nothing is tied to the meat grinder. A low-speed grater, dough sheeter, noodle cutter, pasta ()

Aunt Basia, thank you for your quick reply.
I understood everything. So I want to then buy a dough sheeter and a noodle cutter. The girls really like it. And what kind of dough sheeter and noodle cutter (models) goes to this model?

Rolling out - AT970, and noodle cutters - with AT marking (there are many varieties of them according to the type of cut noodles)

AT-970


AT-971


I have such

Aunt Basya, THANKS.
This is exactly what I need.
Does the noodle cutter adjust the width of the noodles?
My love is to have thinly rolled noodles and narrow stripes.
In general, you will be tortured to roll with your hands. While I put it on, my hands fall off.

[Esfir]

Esfir
Raskatka - AT 970 A, such as Aunt Basya showed you.
Noodles cutters are marked:
AT 971 A - preparation of "Tagliatelle" 7 mm wide;
AT 972 A - preparation of "Tagliolini" 4 mm wide;
AT 973 A - preparation of "Trenette" 1.5 mm wide (flat);
AT 974 А - "Spaghetti" slicing, 1.5 mm (round).
And the thickness will be the one you want to roll.

[Esfir]

Esfir
Nozzles - AT 971 A (7 mm) and AT 972 A (4 mm) noodle cutters are the best option for home use. The other two attachments give a very small cutting width. And if you roll out the dough very thinly, then you need to get used to these attachments so that the dough does not break when you exit the noodle cutter. Yes, and it is better to cook such products right away, while the dough is not dried. If ready-made long spaghetti is dried, they break easily.

Girls! Is there anyone among you who has a KMS 560 1000 W? Here is such a gift for me! Is there any help from him in the household? I read, looked and was upset. All of you write about 10 and about 20.
If there are any, please tell me what to do with what nozzles and at what speeds. There is nothing in the instructions (except for 4 speeds at the meat grinder).
Respond!

Hurrah!!! Thanks to the Fotos store, I am the owner of the KM013 Machine! Take girls into your ranks.

Hurrah!!! Thanks to the Fotos store, I am the owner of the KM013 Machine! Take girls into your ranks.

Congratulations!!!!!!!
Kenwood is great !!!!!
Need help from the hall
Going to do Pangasus in pajamas and a cow
In this regard, the question
Which drum is better for chopping onions? (there is only a low-speed shredder - there is no high-speed one yet)

How to tell if the whisk is correctly adjusted?
And where should you twist it?
How do I know, but where and how much?

The nut is just above where the whisk is inserted

[Esfir]

Esfir
Raskatka - AT 970 A, such as Aunt Basya showed you.
Noodles cutters are marked:
AT 971 A - preparation of "Tagliatelle" 7 mm wide;
AT 972 A - preparation of "Tagliolini" 4 mm wide;
AT 973 A - preparation of "Trenette" 1.5 mm wide (flat);
AT 974 А - "Spaghetti" slicing, 1.5 mm (round).
And the thickness will be the one you want to roll.

thank you very much for the detailed answer. I'm all in thought. I wanted to take here on the spot in Rostov in the online store 010, now they have lowered the price a little, here you can already see what you take, and the girls are advised to read Temka to take 020 right away, but it must be ordered in Moscow, but I'm afraid of something. Never ordered anything before. In general, I think ..... And where did you buy? I see we live side by side.

Girls, I want to buy a submersible blender to whip one glass of milkshake for a child, make mayonnaise, and a soup-puree right in the pan, but I doubt if it is really necessary if you have KM 020? Are there owners of both here? Help me decide or dissuade ...

[AUV]

AUV, You practically answered your own question.

I have not yet acquired a CM, there is a food processor of the same Kenwood, but ... when a large machine appears, a submersible blender will be bought for the company.

KM is a stationary technique of global, so to speak, use.
The hand blender is portable and small quantities. Well, you will not occupy a large technique because of beating two eggs per omelet. Or making mashed potatoes for you and your child to have a snack. You may sometimes have to throw a blender in your bag and go somewhere to the dacha, or to visit, or on vacation, where, after all, you will have to cook.

So, I would highly recommend getting both.

If funds allow - buy! Personally, I have not yet come across such a universal kitchen unit that would completely replace everything! If I have two multicooker, I can't refuse the stove, if I have Kenwood 10, I still use the submersible Zepter. And the oven and the Convection oven complement each other successfully.
With a submersible mixer I make mashed potatoes directly in a saucepan, mayonnaise, sauces, milkshakes (if really in a glass), mustard

After KM 20, I got a submersible blender, not at all superfluous.

Kalmykova, Aunt Basya, Rina, thank you! Did you take submersibles in the minimum configuration or multifunctional ones?

I took the minimum, and now I'm sorry. But the power is 700 W!

I have 020 Kenwood, but I bought another 724 and I can't get enough of it, it's just a miracle !!!

If funds allow - buy! Personally, I have not yet come across such a universal kitchen unit that would completely replace everything! If I have two multicooker, I can't refuse the stove, if I have Kenwood 10, I still use the submersible Zepter. And the oven and the Convection oven complement each other successfully.
With a submersible mixer I make mashed potatoes directly in a saucepan, mayonnaise, sauces, milkshakes (if really in a glass), mustard

I totally agree with the girls. Each appliance plays a role in the kitchen and they complement each other. Buy a hand blender - it is really very convenient and needed in the kitchen.I have a submersible septor and whipping half a glass of cream or 1 egg is just cool

And I was disappointed in the control room. It is not worth the money that is declared ... You can change the Phillips and Kenwoods with Bosches annually until the end of their days for that money .. Oh, sorry ...

And why? Something didn't whip up? It's a pity .... Expensive of course, I agree with you. But I bought it for so long that there was nothing good on the market then. And I came across a very good woman distributor, I am still friends with her and she taught me a lot, I also have dishes from this company. Oh, I already started to flood. Sorry.

And I'm happy with mine. maybe because I got it for a cheap price: I took a set of Waxi, and he went either with a huge discount, or even as a gift !! if I change, I'll buy the Zepter again, I've been plowing for 15 years ..

And I'm happy with mine. maybe because I got it for a cheap price: I took a set of Waxi, and he went either with a huge discount, or even as a gift !! if I change, I'll buy the Zepter again, I've been plowing for 15 years ..

So I have for many years and have never let down. Although the taste and color, as they say, there is no friend. We are all different and we all like different things. Now the market is so overwhelmed that of course you can choose whatever your heart desires, but this is not the topic. The fact that in addition to the cache in the kitchen you also need an immersion blender is unambiguous, but again, this is my opinion.

The low-speed one upset me today :-( I decided to cut the sausages into smoked, on the high-speed one got thin even circles, the sausage stick was cut in a minute, but here there is only one chagrin - some small pieces, do not cut the sausage on low-speed (((

The nut is just above where the whisk is inserted

Phew !!! Found !!!!!!!
And even twisted

I agree 100% !!!!!!!!!!! You are my smart girl !!!!!!

I agree completely!
724 and titanium as two brothers elder and younger.
Everyone has their own tasks.
I didn't get mayonnaise in Kesh. (did it without an egg) and the youngest almost did it.
It will be necessary to study the topic of mayonnaise again!

Girls, how quiet are canwoods or are they also noisy?
I was just told on another forum that the 040 modnl is also quiet, and I and a small child have what I need, but I don't see this model here, only 010, 020 and 023 are visible on sale.
Are they quiet or are they noisy too?

[How it makes noise at a slow speed:]

Are they quiet or are they noisy too?

Everything is known in comparison, somewhere here I have already laid out the sound of the work, I can't find it in any way, it's easier to put it out again.
How it makes noise at a slow speed:


On high:

Girls, and in large stores like Eldorada, a semi-toy children's mixer in the form of the same KM is attached as a gift to such machines. Didn't anyone come across it separately? Or is it just an option for an expensive purchase?

I did not see. We really don't. In Eldorado, M video, technosila costs a maximum of 266 models of 14-15 tons.
And even on websites nowhere except one Ukrainian. Shopkenwood did not see. And she also contracted it. My son would be delighted. He (3 years old) helps me in the kitchen more than his daughter (12 years old) and loves this thing to "shake!"

In Krasnodar I saw 023 for 39 tons. a 010 007 for 31t. R
But she felt and looked. compared 010 and 020 live. After me, they probably called the cleaner. Clean up drooling from the floor

Girls! But really someone else cut the smoked sausage on a high-speed one ???

[julifera]

Girls, do you know the level of DCB at the Canwoods? Is it written in the passport or not?

julifera
Thanks for the video, I looked and it seemed to me that he was making noise even more than my Bosch 84. What to do?
I only saw on one site what they wrote about models 030 and 040 - a more powerful motor and quieter work. And to take 020 and to be the same noisy then I do not see the point.

In my opinion the Kenwoods are all noisy. They do not bother about it. I have a 450-I Bread Maker and a K-Mix - both work with the sound of a bulldozer.

Ooh ooh ooh, what am I to do that
When it is interesting that the 040 model will be sold in Ukraine, does anyone know?

[AnnGlamour]

if it does, it is not yet known how much it will cost.

AnnGlamour, why not contact the representative office with a question? True, they usually don't know a thing. But suddenly?

[AnnGlamour]

AnnGlamour Excuse me .... I did not understand how such a noise can interfere ??? Even if the child is small ?? After all, he does not always sleep and it is unlikely that the bed is right next to the mixer ?? !!! And it takes a few seconds to cook in it .... Bosch, by the way, makes no less noise, they are nearby and I can compare ... yes, it seems they all do not work silently !!!

Kenwood is noisy, of course, at first it was annoying that it was yelling louder than me, but now I got used to it ... My TV is just louder when the meat grinder, for example, buzzes. And my dog ​​even likes it - since a meat grinder, it means that a piece of meat can fall to the floor ... by accident ... Well, really, it makes a noise, but somehow it's already familiar ... We haven't reached the measurement of noise ... The main thing is that it is noisy and without clamor, it means that the car is working properly ... And if it makes a lot of noise, maybe put some kind of rubber on the mat ...

[AnnGlamour]

AnnGlamour Excuse me .... I did not understand how such a noise can interfere ??? Even if the child is small ?? After all, he does not always sleep and it is unlikely that the bed is right next to the mixer ?? !!! And it takes a few seconds to cook in it .... Bosch, by the way, makes no less noise, they are nearby and I can compare ... yes, it seems they all do not work silently !!!

Excuse me .. the noise from Bosch my child does not like categorically and simply interferes. As soon as she hears this hum, she immediately starts crying and runs to save me from the mixer, I am telling you this in full earnest, I have this unfortunately a problem. Therefore, when she sleeps in the afternoon or goes to bed at 9 in the evening, and this is the only time when I can make cakes, then you yourself understand it makes a noise so that she cannot sleep, even being in another room behind two doors. I have already shown her a hundred times and explained that this is how the mixer works, it does not help anything, at high speeds when it is necessary to whip the protein, I can hardly hear myself, my husband always has to shout down the harvester. It is for these reasons that I clung to a straw that it is possible that there are quiet combines and that at least it will not work so noisily and the child will not react to it that way.