|
Technical characteristics of the multicooker Saturn ST-MC9205
Power, W: 860
Preset Cooking Programs: 27
Bowl capacity, l: 5
Ceramic spraying bowl: Yes
Cooking time change: Yes
Voltage, V: 220-240
Measuring Cup: Yes
Keep warm function: Yes
Accessories:
- Measuring cup,
- soup spoon,
- rice spoon,
- steam nozzle,
- glasses for yogurt.
Frequency, Hz: 50
116 cooking programs
This multicooker is equipped with 116 programs, of which 38 programs, 4 programs and 72 individual settings. In addition, there are “Favorite Dish” and “Smart” programs with their own adjustable settings. In fact, there is no limitation in user settings, and 72 are just the basic settings that can be saved in the memory of this multicooker. You can also use 5 basic automatic programs with one of the four types of products. This feature makes the cooking process more flexible.
Please note that custom settings that are applied before the start of the program, as well as during the execution of the program, are saved in the multicooker memory. The new settings override the factory settings, but you can restore all programs to their factory settings at any time.
"SMART"
The newest feature of this multicooker is the "SMART" program. It allows you to create a multi-stage cooking program (up to nine stages). This new program is the best way to prepare soups and sauces when a specific time / temperature combination is required for each cooking step.
TWO-STAGE PROGRAMS
The PLOV and BREAD programs consist of two automatic cooking stages. An audible signal indicates the start of the second stage. The temperature cannot be adjusted in these two programs.
USER SETTINGS
There are four free programs that you can customize and save in the multicooker memory. This feature is handy if you need a dedicated program for frequent use.
EXPRESS
This is a program for preparing cereal porridge (or muesli). During cooking, the temperature reaches 98 ° C and all the liquid evaporates. When the temperature reaches 100 ° C, the program stops.
"CHEF" (CHEF)
The CHEF (Chef) program allows you to change settings (such as time and temperature) during the cooking process. You don't need to stop the program. Just change the settings to your liking at any time.
FAVORITE DISH
This program allows you to make and save individual settings, therefore it is the most flexible and convenient way of cooking. It is simply irreplaceable when used in tandem with CHEF and CHEF-PRO. The CHEF program allows you to change settings during the cooking process, and the CHEF-PRO function saves these settings in the multicooker's memory for future use.
Temperature range - from 30 to 180 ° С; step - 1 degree. Cooking time range - from 1 minute to 24 hours; step - 1 hour / 1 minute.
"CHEF-PRO" (CHEF-COOK - PRO)
For culinary masters who create their own recipes, the "CHEF-PRO" function is provided. It can be used to reconfigure the automatic cooking programs to become default settings. However, you can return the factory settings for any one program or for all programs at once.
AUTOMATIC HEATING
Most programs have an automatic temperature hold for the finished dish. This mode is not available only for the FRYING / FRYING and YOGURT / Dough programs.However, you can activate the keep warm function yourself for these programs, although this is not recommended for these types of food. The keep warm function can be activated or deactivated during the cooking process or at the end of the cooking program. You can also change the keeping temperature between 30 ° C and 90 ° C. The default temperature for keeping warm is -70 ° C. You can also deactivate the keep warm function if you do not want the multicooker to switch to the keep warm mode at the end of a cooking program. Just press and hold the button during a cooking process or at the end of a cooking program.
DELAYED START
The user can configure the program to run at a specific time. Simply put the ingredients in the multicooker bowl, select the program and check the cooking settings. Then activate the DELAYED START mode and set the time period after which you need to start the program. The time range can be varied from 30 minutes to 24 hours.
This function is not available for the following programs: FRYING / FRYING, BAKERY PRODUCTS, PILAF, BABY FOOD, MILK, OMLETTE, BREAD, PIZZA, EXPRESS and DESSERTS.
ON / OFF BEEP SIGNALS
You can turn off the signals that sound when the multicooker is running. Press the O and t ° C buttons at the same time. Press the same two buttons again to turn on the beeps. When the beeps are disabled, the indicator is on.
Display
LED display backlight color is orange.
The display shows the current temperature and cooking time while the program is running. When a program is in delayed start mode, the display shows a countdown to the start of the program. When the hob is in keep warm mode, the display shows the total keep warm time.
Display readings
- Time.
- Delayed start mode.
- Cooking time change mode.
- Temperature.
Cooking food
- Please check first that both the inside and outside of the bowl are clean and dry.
- Insert the bowl into the multicooker.
- Rotate the bowl slightly to ensure full contact with the bottom heating element.
- Place the ingredients in the bowl according to the recipe.
- Close the cover. Connect the multicooker to a power source. Please always follow the instructions above before using the appliance.
Menu for product types
Some automatic programs can work in conjunction with one of four modes for product types: MEAT, CHICKEN, FISH and VEGETABLES.
Programs that can work with a certain type of food are: frying / deep-frying, brazing, soup / bouillon, braising and STEAMING / BOILING. When choosing any of these programs, you can combine it with a product type by pressing and turning the knob until the icon for the desired product type flashes. To select and start a program, press and hold the button for 2 seconds.
|
