Coffee grinder

OK. Well, I'll bargain, I won't buy more than a thousand.

OK. Thank you.

Virgo, call me, there are no such. Iron only. And not everyone here even knows about Urartu.

Varvara, thank you ... alas!

In general, I ordered Nivonu today. For Bork 5990 the toad strangled, everything else was not to my liking.

My coffee grinder came, grinds to dust, very happy!

Peace be with you bakers!
we have a manual one, but we do not use it all the time, we only drink freshly ground, but in the morning it’s too lazy to turn the handle - therefore, electric

Oh, girls, I seem to have grown to Nivona, but she's out of stock. I have Krups, but somehow I don't know .... Should I wait or take Krups? What do you think? If anything, I brew coffee in a Turk, the grinding needs the smallest

I waited 3 weeks for Nivona to be brought. In the store, they said that they saw a tough one for the first time. Melite is very, very fine. Almost to dust. I make coffee in Veko. The husband was even indignant. Which is very small. There are also good reviews about krups.

Well, why are there no nivons, we will have them on their website - 🔗

[Catwoman]

Thank you, dear Chelyabinsk girls
Catwoman, Helen, well, know, and I will wait, but not for long, otherwise I will drink ground coffee soon, and then like ... there are grains
Pichenka, but I didn't want to from the official site, but where it is cheaper, that is, there is not at all cheaper, apparently, a new batch has arrived, and they have become terribly expensive, but there is an opportunity to get a big discount, that is, all the same it will turn out cheaper and you do not need to pay for delivery, I will pick it up myself.
That's how it is, huh? It cost 4 kopecks, you could take it for a little over 2. And now it's more than 6, that is, 3 anyway. Or not to suffer and order with ozone? a guarantee again from a well-known store for the entire period, and not two weeks, as you think?

or Krups then? She is still 2300 with my huge discount it turns out
But in the picture Nivon is nicer

Do you want me to Nivon next to a photokanu? Can you see the real dimensions?

[Catwoman]

Catwoman, thanks, as I understand it, it's not that big and not at all bulky, right?
And even today I ran in Eldorado, Vitek the millstone stood next to DeLongi, so Vitek seemed much nicer (and cheaper!), I’ll google reviews about him, otherwise in September something extra. a lot of expenses are collected, but salary is not increasing at such a rate

[Aygul]

Aygul, I have a millstone Vitek. For almost a year now. Melet regularly, I use ground coffee for a carob coffee machine, also Vitek. I won't say that it sweeps into the dust, but it turns out well for espresso. I put on the smallest grind. The volume is also adjustable. The price is also nice). I bought $ 70.

[Aygul]

Aygul, I would not buy not Vitek not Delongy, both of me covered with a copper basin, that is, out of order, it is better to dig and buy Nivon.

[Tanyusha]

yeah, Tanyusha, agree. Back again to the choice between Krups and Nivona

And my Krups was covered (((At the service, after several months of delays, they said that parts were not being released for it already and that we had to wait for a write-off act.

Also interested in the Nivona coffee grinder. Girls, tell me why such a range of prices? At OZON it costs 4400, manuf. in China. In other places 6190 and more, there is a production. in Switzerland. Are these really different manufacturers?

Girls, tell me a reliable place where you can buy Urartu? Really want to!!!!!!

Tasha, I bought in this m-not 🔗
in early August, everything is fine. Grinding to dust. I love.

[thrift]

thrift, Thank you so much!!! :

You are welcome. I was also advised by Margit.

Virgos, finally I ran out of coffee and tried my manual grinder.
it's a killer.It takes so much effort! Barely ground one teaspoon. For being in the dust. I don't know how long I can hold out.

[kolobashka]

kolobashka, what kind of grinder do you have? Can I have a photo? I am waiting from Armenia, my friends should bring Urartu.

[sobarik]

2 }

on the previous page showed.
sobarik, but ask where they bought the urartu, I did not find it in Yerevan.

where they bought urartu, I did not find in Yerevan.

IN Deviceaholic Club Pack gave a link 🔗

[sobarik]

sobarik, but ask where they bought the urartu, I did not find it in Yerevan.

I will definitely ask how they will arrive! I hope they will bring what you need!

no, this is some kind of punishment! She took out her espresso machine from the bins, bought some beans, and dreamed about gourmet coffee. Yeah, schaz ... My knife grinder, with grief, grinded the beans unevenly in half, and I got some kind of coffee slop at the exit from the coffee maker. Here, why ask, did I get it? One disappointment and a nervous breakdown! I lost sleep and peace, I keep thinking which coffee grinder to buy (the most budgetary one). I opted for hand-made Gipfel or Vitek 1548. I was tormented by doubts. Does the hand grind well, fine enough?

They brought it to me!
As a result, after much thought and discussion, not a millstone, but a knife Profi Cook 2 in 1 was chosen. The volume is large, made with high quality, the instruction is good, the coffee grinder is beautiful and solid. One glass with two knives for coffee, the other with 4 knives for chopping nuts / spices / ...
Tested for coffee - excellent!

[Newbie]

Newbie, I have such a Vitek 1548 coffee grinder. I bought it because we don't sell other millstones, and the price was low. Melet well, I fall asleep in the carob and enjoy - a wonderful, deep taste of coffee, undigested (I don't like it), but the same as you feel when you smell the beans themselves. Now I have Ikeevsky coffee, the cappuccino turns out to be very tasty, everything suits me. By the way, the coffee grinder before this one, I also happened to have Vitek, with knives, and also copes well with coffee, it turns out fine. But how did I know that there are other coffee grinders, I wanted to get closer to the right coffee in order to grind with millstones.

Well, tormented by the agony of choice, without bringing the matter to a nervous tic, I bought a hand millstone Gipfel. Set to fine grind. The grinding is not into dust, but rather uniform, there are 1x1 mm "pebbles" (however, in the purchased coffee (in a cup) of fine grinding, the same sawdust floated). It grinds into one portion quite quickly, but with effort (taking into account that I am a puny set). I tried it in a carob coffee maker - I don't like it, I can't understand what kind of grinding is needed for it (and I don’t like a coffee maker - how much unjustified fuss with it) I brew right in the cup. For the Turks, I don't know if fine grinding is enough, probably not, if only to grind it twice. By the way, when I ground it twice, it turned out to be a gorgeous cream when brewed with boiling water.

[Newbie]

Newbie, and what is your carob? I had some kind of antediluvian Roventa for about 15 years, but the taste of coffee suited me. Now Vitek 1513, there is not much fuss, given the fact that I drink coffee one and only one cup in the morning. And between the coffee makers and I also brewed in a cup, I liked it less, but without fish ...

And between the coffee makers and I also brewed in a cup, I liked it less, but without fish ...

oh, I like it better in the cup (in any case, I didn't find a tangible difference, but I'm, by the way, not a gourmet). I have an old Crups coffee maker. Coy what personal belongings already onhehlost. And the consumption is more obtained (products and lyricism). And at the exit - slop without a hint of foam (I drink it with pelvis, it is not high for me to sieve a beaker). And something a lot of water remains in my horn. And then shake the husk out of the horn, rinse it, wipe the coffee maker, clean the cappuccino maker, drain the water from the reservoir ... I probably made two cups of cappuccino coffee for an hour. I do not want.

[Newbie]

Newbie, well, yes, so many body movements, and not even rewarded with good coffee. You really don't want to. Better in a cup.It has already been written about Vitek that a decent amount of cream is obtained. So I'm happy with it in this sense. And if I had to cook 2 cups - for myself and my husband, I would definitely persuade him to buy a machine.

Well, yes, so many body movements, and even not rewarded with good coffee.

Well, yes, I bought a coffee grinder for this particular coffee maker. It did not grow together ...

you need a coffee grinder, one of the functions of which will be the grinding of powdered sugar.
manual is not needed - from an alloy of steel at the price of gold and technology at the dawn of BC. e. do not
you probably need to choose from the millstones?
https: /// 9RdR9
If you read the reviews - some do not fly, others have gold cars "need to be improved" ... is there anything normal on sale?
//-----
and how are manual ones chosen? by sight - wooden boxes with a range of prices ... for the design?

I am looking for a coffee grinder, settled on the Delongy millstone and found a great offer 🔗 will be only 2690 rubles. in Stockmann 05.04, in real life this model costs about 6 thousand. Maybe someone else will be interested in this information

I am looking for a coffee grinder, settled on the Delongy millstone and found a great offer 🔗 will be only 2690 rubles. in Stockmann 05.04, in real life this model costs about 6 thousand. Maybe someone else will be interested in this information

you are looking or already - what's the point of your post? advertising your dumb shop huckster from VK? 3/5 reviews about him, I sympathize, but only reorganization will help you.
in any store both Delonghi KG 79/89 models cost 3100/3800 rubles, and in the online store / auction I can buy a new one for 1800 rubles. (79)

[Moofiepie]

Moofiepie, the meaning of my post is to share information about the opportunity to buy cheaper .. In the meantime, I’m still looking for, choosing, maybe someone will advise me another good

in any store both Delonghi KG 79/89 models cost 3100/3800 rubles

and where are the prices? I found min 4900/5600 ..

advertising your dumb shop huckster from VK? 3/5 reviews about him, I sympathize, but only reorganization will help you.

And this statement did not understand at all ???

and where are the prices?

Yandex, I'm lazy enough. plus there are international online auctions.

Didn't you understand this statement at all?

no need to indicate third-rate social network as a link - I had to search for the model (s) through the manufacturer's website.

I, too, am lazy, so that I can use Yandex, and even more so online auctions, I found it cheaper and shared the info, and the link I found was the one I gave in confirmation ... everything else is pointless .. I finish the polemic and all the best to you!

Finally, my throwing ends, I went to buy a Delongy 89 model, and bought a Nivona NICG 130 CafeGrano coffee grinder, it really grinds into dust, but for a long time ... a timer for 10 seconds. Why didn't he understand at all? For 2 tsp. coffee, set it three times. If anyone is interested, then they are in Stockmann (Khimki) for 5990 rubles. and with a coupon for a regular customer, another discount of 500 rubles.

you need a coffee grinder, one of the functions of which will be the grinding of powdered sugar.

Any, even the cheapest knife grinder will cope with this task.

you probably need to choose from the millstones?

There is no need for a millstone, only you will transfer money in vain. For this amount, you can buy a dozen knife. A millstone is good for grain, beans, where overheating of the ground product degrades the quality of the finished product.

advertising your dumb shop huckster from VK? 3/5 reviews about him, I sympathize, but only reorganization will help you.

Not knowing the person ... to scare him. Hamovato and disgusting.
... I had to search for the model (s) via the manufacturer's website.
Hopefully not broken.

Not knowing the person ... to scare him. Hamovato and disgusting.

Never mind, this is all too often.

Any, even the cheapest knife grinder will cope with this task.

And I'm still afraid to grind powder in my Boshik, I bought a cheap 180-watt coffee grinder especially for the experiment. So you shouldn't be afraid?

[Margarita]

Margarita, I can not pass by this. Natasha is a wonderful sympathetic person, and here it is trying to hurt her. And from scratch.

[TatianaSa]

TatianaSa, Tanyushik,

I have already forgotten about this "roll-over", and most importantly, it was completely pointless, because the contact group is not mine either .. and the store is certainly not mine .. random information that I sincerely wanted to share

Now I got here too.
You need a cheap and cheerful coffee grinder. Coarse grinding is needed.
Actually, I'm not looking for coffee, but for dog food, because the booger has lost half of its teeth, and I’m eating hotzza for her. But it's hard for me to pound by hand, the feed is solid.
Advise something on a budget

Maybe an ordinary knife .. A couple of times I pressed the button and the food will be broken ... and it should not be fine. that would be fine, you really need to hold the button for 12 seconds. Well, at least that's what the instructions say .. The choice of such a coffee grinder is very large ... there are both cheaper and more expensive ...

Yes, I was thinking about the knife. And I also need a small amount. And necessarily a metal cup and everything else that is durable that directly contacts the grain.
Can you tell me which company to pay attention to, so that it has a good reputation and is inexpensive?