Svetlenki
Quote: Miranda
before kenwood, I wanted him, he still has an inclined feed, but she does not give spirals, but breaks there

Miranda, so I did not "drive" at all on this nozzle. Such scant information ... I understand that it gives a wide spiral tape ... Or breaks?

They have released the Cult now with a full set - 5 cones and plus this inclined thing ... But the price, as always, at WMF ... status
Miranda
Svetlenki, there is only one version of the spiral, if through an oblique, the rest is cut like a regular slicer.

On page 11, I showed pictures, but I did not see the video, maybe there is already where

Spiral chopper (slicer, spiralizer) for cutting vegetables and fruits # 219
Svetlenki
Quote: Miranda
the rest is trimmed like a regular slicer.

And that's why they made it? Who will use the spiramat for slicing only? And you have to pay for both attachments in the set or for the complete set of the Cult ... Radishes ... They add unnecessary things to the device.

And the "tornado" nozzle is interesting, of course ... Although these potatoes are deep-fried, I think the children will squeal with delight. Also on a stick ...
Svetlana777
And I have a question because I want Kenwood, but I read his power of 70W, and the one with Ozone 100W .. ((damn it and why not vice versa)) is it significant or how?
Cirre
But I liked this one .. Teach how to order from Amazon

🔗

🔗

Masha Ivanova
Cirre, Galya! And through Tatiana T.A. in the Chibo topic? There, by the way, now they order Kenwood.
Svetlana777
Galina, I also looked at him, but confused 3 stars in the assessment. Order through the joint venture here

https://Mcooker-enn.tomathouse.com/in...=306868.new;topicseen#new

Cirre
Svetlana, do you take kenwood?
Miranda
Nice, greenish.
But it seemed to me that the pipe was too narrow. For some reason they made it like in combines - an oval



Spiralmania on the forum
Helen
Quote: Miranda
Spiralmania on the forum
bangs
Quote: Svetlana777
I have a question because I want Kenwood, but I read his power 70W, and the one with Ozone 100W ..

The one from OZONE, that is, Gemlux, also has a power of 80W (I declare quite officially (now I found the instructions, sorting through the papers on the table)), but it is quite (quite!) Enough.

And by the way, the instructions also say that "The device is not suitable for chopping meat!"
(This is exactly what it is written with an exclamation mark and without specifying what kind of meat (apparently, "meat" - in the broadest sense).

So, excuse me, but I will not do experiments with meat (not with frozen (not with any)) ...
Cirre
Miranda, thanks, he is strange. Cuts in pieces.
Svetlana777
Quote: bangs
but I will not do experiments with meat
, and with fish
bangs
Quote: Miranda
for some reason it was made like in combines - an oval

Maybe this is due to the fact that the blade is shaped like a disc, not a cone ...
Svetlana777
Quote: bangs
also power 80W
here is Ozone deceivers, they read 100W ... here and believe them
dopleta
And what's the point of spiraling meat and fish? After all, it is obvious that the result will be porridge.
bangs
Quote: Svetlana777

, and with fish

exactly! nothing has been written about the fish ...

But perhaps I will refrain ...
Lerele
Cirre, listen, his knives are even, not a cone, I have a different cutter and the same flat round timber with knives. So, on this round timber the vegetable seems to crawl, but I have no throat, put one end on this round with knives, the other is attached to the rotating part, similar to a leg from a mixer. I really don't like this greenery, I think it will still crawl with its throat. T
So look, maybe it's still better tested, otherwise there are terrible reviews on yours and there are many bad ones.
Svetlana777
Quote: Cirre
can you take kenwood?
I think ... they have infected (I already have a Gemlux lying on Ozone in my basket, they gave me a gift for 500), and that's all in thought ... well, I'll think of it, I'm getting out and ... I won't buy anything
bangs
Quote: dopleta
what's the point of spiraling meat

Masha Ivanova - Elena I asked here if it is possible to cut sausage on a spiralizer, and I also thought ...

But now - hang up! ...
Svetlana777
Quote: Lerele
then there are terrible reviews on yours and there are many bad ones.
here I am about this, as I saw the assessment, I immediately dismissed it
Masha Ivanova
I didn’t like this Z cut at all. Firstly, the aunt holds a cucumber with her hands, no fixing of the vegetable on top is observed. Secondly, after slicing, a lone spiral from the middle of a cucumber and a bunch of some scraps of different sizes hang on the plate. Thirdly, we all already have a bunch of manual and electrical devices to cut cucumbers into plastics.
Cirre
Lerele, Thank you

Quote: Svetlana777
basket lying on Ozone Gemlux, donated for d / r 500
We must take

Svetlana777
Quote: Cirre
We must take
so he would have been Kenwood, he would have hapanula, and now all in thought where to go to Ozone or to the joint venture
Cirre
Quote: Svetlana777
and now all in thought

Well, they are similar? Only kesha green
Cvetaal
And I ordered on March 24 on Ozone, they promise delivery on April 9. Natasha (chelokoshka) is happy, she also has Gemlux GL-SR-1003
Cirre
Did anyone order on such a site?

🔗

Zamorochka
I read, read the topic, persuaded myself that I don’t need this I admired the review Miranda, then seductive posts and photos Natasha bangs... And yet, the hochushka won, decided to order, wondering what to buy Kenwood or Gemlux
For some reason, she was more inclined to Kenwood, because of the wide nozzle, but outweighed Gemlux, because of the opportunity to buy for 1960r using points and not wait for delivery from Amazon.
I guess I made the right choice
Cirre
Quote: Zamorochka
I guess I made the right choice

Miranda
Zamorochkadefinitely!

By the way, I had a crazy idea. By all appearances, the devices are similar. And if someone was from Moscow time with Gemlux, one could try to try on Kenwood cones for Gemlux.
Cirre
Quote: Miranda
one could try to try on Kenwood cones for the Gemlux.

I just wanted to ask, is it possible somehow to measure and compare the cones.

Cvetaal, Svetochka will get it, can cross and try
bangs
Quote: Zamorochka
For some reason, she leaned more towards Kenwood, due to the wide nozzle, but outweighed Gemlux, because of the opportunity to buy

Zamorochka-Galina, I, too, at one time leaned towards Kenwood when I saw their version of the spiralizer,
but here I saw a tip Miranda on Gemlux (for which she Thank you so much), then sold in OZONE (and indicated as a chopper), which I bought for 2,700, ordering the same night ... But I was ready to pick it up for 3,800.
And when I ordered, I didn't even pay attention to the set of nozzles, I noticed the absence of the widest strip only when unpacking. I have enough of those that are ...

But you still need to be guided by who, what and why is going to use this machine.

P.S. And more ... thanks ...

Miranda
Cirre, you can start with the theoretical part, that is, measure the cone itself and the round piece into which it is inserted. But definitely not today
bangs
Quote: Miranda
you can start with the theoretical part, that is, measure the cone itself and the round piece into which it is inserted. But definitely not today

That’s right, and I’m ready to participate in a comparative analysis, but I’m afraid that small grooves, etc. may not fit ...
You need to think about how to compare as much as possible ...
Zamorochka
Miranda, Cirre, bangs, girls, thank you very much for your support
In reality, I wondered which one to buy, outweighed the opportunity to buy for little money and the fact that outwardly, in terms of color, it would fit well next to the new Kenwood shredders. The day after tomorrow is already ready for delivery in the store
Cvetaal
Quote: Miranda
By all appearances, the devices are similar. And if someone was from Moscow time with Gemlux, one could try to try on Kenwood cones for Gemlux.

It would be interesting to me too)), but I have delivery only on April 9th.If no one is found before, then I'm ready to cross.
Miranda
Quote: bangs
You need to think about how to compare as much as possible
Take a very large picture of the inverted cone so that you can see the grooves that fit into the circle. I'm taking a picture closer to the weekend.

Zamorochka, I wish you to love him as much as you did bangs
Zamorochka
Quote: bangs
in a comparative analysis, I'm afraid that small grooves, etc. may not fit ...
Most likely, it is, but ... everything can be.
Svetlana777
Quote: Zamorochka
because of the opportunity to buy for 1960r
Galina, congratulations, at this price I would also hapanula without hesitation.
Cvetaal
Today I received a spiralizer from ozone, despite the fact that they promised only on April 9th ​​Thank you, Ozone!

Photographed a little)
For comparison with Kenwood:
Spiral chopper (slicer, spiralizer) for cutting vegetables and fruitsSpiral chopper (slicer, spiralizer) for cutting vegetables and fruitsSpiral chopper (slicer, spiralizer) for cutting vegetables and fruitsSpiral chopper (slicer, spiralizer) for cutting vegetables and fruitsSpiral chopper (slicer, spiralizer) for cutting vegetables and fruits
The pusher-holder for vegetables has, in my opinion, not a very convenient design, hard vegetables tend to slip off.
Spiral chopper (slicer, spiralizer) for cutting vegetables and fruits

And this is my first experience:
Spiral chopper (slicer, spiralizer) for cutting vegetables and fruits
Cirre
Shine, liked? Congratulations

Here Miranda did a review, look, the details look like https://Mcooker-enn.tomathouse.com/in...k=view&id=1593&Itemid=296
Zamorochka
Quote: Cvetaal
Got a spiralizer with ozone today
Congratulations Judging by the photo, the first experience is not bad. How are the general impressions?
I have to pick up mine tomorrow.
Cvetaal
Girls, thank you))), first impressions are ambiguous, I liked it rather than not, but so far without enthusiasm)). Immediately it turned out to grate the zucchini, but the potatoes and carrots slid off the holder. And yet, I have a very tightly fixed part along which the vegetable is moving, you need to turn it until it clicks with a very great effort so that the device turns on, no matter how something breaks ... Maybe it will develop over time). Now I will spiral the cucumber). ...
Zamorochka
Quote: Cvetaal
And yet, I have a very tightly fixed part along which the vegetable is moving, you need to turn it until it clicks with a very great effort so that the device turns on, as if something does not break ...
I have the same bullshit with the new Kenwood shredder, I hope that it will be developed, maybe in this design as well, while new.
Can bangs will go into the topic and tell you how it was and is.
I'll test mine tomorrow, I also bought vegetables))
Miranda
Quote: Cvetaal
Photographed a little)
Thanks, I'll take a picture of Kenwood later.

Zamorochka, all waiting for your impressions of him
Zamorochka
Miranda, I'm sorry, I confess, I have to sit with my little grandson, I just come home, I look forward to the weekend to trim the vegetables and show them their appearance. But outwardly, he's handsome, of course
I'm sorry that the flood is off topic
bangs
Cvetaal-Svetlana, my congratulations on such a purchase!
I hope you enjoy it as well and as much as I do!

Even if they (rarely) slip off, I grab them inside ...
In general, you need to cling without undue zeal.




Quote: Cvetaal
And yet, I have a very tightly fixed part along which the vegetable is moving, you need to turn it until it clicks with a very great effort so that the device turns on, as if something does not break ...

It seems to me that there is no need to worry about this, at first it was not that tight, but it seemed that it was coming in tight, and even more tension was added to my hand ..
and now, even if something has fallen off the holder, I unscrew the neck, put the vegetable up with a depression from the holder, I screw it in again, lower the pusher and sharpen.
(literally "4 Mississippi" ... the whole "procedure")
Cvetaal
Natasha, thank you!
Already close to delight. Did a great job with long cucumber and daikon! And how much salad turned out, beauty!
Spiral chopper (slicer, spiralizer) for cutting vegetables and fruits
julia_bb
Cvetaal, congratulations on the new thing! Delivered quickly!
Quote: Cvetaal
Did an excellent job with long cucumber and daikono
It turned out great, on which disc did you do it?
Zamorochka, we are waiting for impressions!
bangs
Quote: Cvetaal
And how much salad turned out, beauty!


All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers