lesik_l
My light is always on after I turn on the button on the back. I never turned it off from the network. That is, the "Power on" indicator lamp
skomoroshka22
and after the baking program has ended and the temperature is maintained for up to 60 minutes, what do you do?
lesik_l
I take out the bread
And, if necessary, I run the following program. But only after a while to cool down and turn off the switch for 10 minutes behind. Maybe you don't need to turn it off - I don't remember, I'm mostly baking in the oven now
skomoroshka22
and before removing the bread, press and hold the cancel button to stop the temperature maintenance program? And when you turn off the switch on the back, does the battery icon appear on the screen?
lesik_l
To be honest, I don't pay attention to the icons at all. Well, why are they - just extra information. I use the board only to select a program, and in the process when I need to change the duration of the stages. All the problems that were: I wrote a mistake and squeaked when I wanted to turn on the next program in an uncooled stove, and ... that's it.
lesik_l
Quote: skomoroshka22

and before removing the bread, press and hold the cancel button to stop the temperature maintenance program?

I just take out my bread and turn off the oven in the back
Ernimel
The bucket saga continues!

Believe it or not, the bucket ordered in April "two months later" is either stuck somewhere, or stalled, or meanly forgotten about me - but I still have my bucket, scratched. In the summer, my husband kicked - it wasn't there yet, and then we started spinning ourselves, but there weren't any letters-calls for sure.

But I discovered the wizards from the sybovar who sit on the cartoon forum and restore (mostly) custom-made bowls to Panasonic. But they do not disdain other dishes either, and the price tag is reasonable in principle. Even taking into account the transfer to Tomsk, it would at least be a guaranteed replacement. But! They are not ready to disassemble and assemble the bucket themselves. And they need to send them purely "bucket", with completely removed mechanics.

Hence the question. Has anyone tried to disassemble (and most importantly - then assemble) their bucket? At first glance, this twist is riveted there tightly. Well, that is, it is in my, mother's opinion ... Share your experience, please!

Ernimel
sazalexter, yeah, thanks for the educational program, I went to think! And if I have no complaints about the node itself, and the problem is in its separation - the insert, I correctly assume that it is realistic to simply drill out the rivets, take it out "as is", and then put it in a new bucket with screws? Or, for simple extraction, you will still need its full / partial disassembly?
sazalexter
Ernimel it is not necessary to disassemble the unit, it is enough to separate it from the bucket. How to fix it later already seemed to be explained.
Sailor
Help is needed.
I have been using my HP for almost 2 years, there have been no problems. I bought an exact copy of my mother and immediately ran into ...
You turn on program # 1 (3.20), it interferes for exactly 20 minutes and then turns off, or rather resets the program to the beginning. You press start and everything repeats.
Voltage OK, socket grounded.
Does the HP itself have a battery ?? maybe it's the reason ?? How to replace it ??
sazalexter
Sailor There is no battery in HP, the maximum is an ultracapacitor, which loses its capacity after 20-45 minutes. The stove is in service!
Lazy
Just in case, who needs it, I’ll tell you: today I called and immediately bought a bucket with a stirrer for 125s in Kiev on Glybochitskaya 53. It costs 390 gr. In another service offered on order in a week with an advance payment of 560 :))).
Zoya
The owner of this stove is 3 years old.For about a year she stood with me after some problem, decided to get it today, washed it thoroughly, but the problem is still present, namely: when kneading the dough, I find black stains in it. So I even took a picture, everything is visible there. Has anyone had this? What could be the problem?
Zoya
Problems and breakdowns
Problems and breakdowns
Badgarry
DeLonghi 755 S

Baked bread this afternoon
after baking I could not get the bucket - it stuck there
I barely managed to get the bucket out with 2 thin screwdrivers
on my sides - 2 spring-type clamps
external examination did not reveal - damage to bends and breakages
BUT - I do not understand the mechanism of fastening the bucket - the springs themselves are absolutely smooth - without ledges, etc.
there are also ledges on the bucket - but it's not clear - where the bucket is fixed

Wait a bucket - easy to insert - but does not hold even when kneading the dough - it will pop out

Problems and breakdowns
Problems and breakdowns
Problems and breakdowns
Problems and breakdowns
sazalexter
Due to the rigidity of these springs, the bucket is held. Apparently you bent them strongly in the direction from the bucket, now they need to be slightly bent to the bucket so that they seem to "grab" the bucket
MishaJ
Cotton DeLongy 750V.
I'm sorry, but I have a problem. They gave me this bread maker the other day. But there was one defect. After kneading and warming up a little to rise the dough, the kneading program started again. I had to bake in the oven. How can this problem be solved? And yet, when you turn on the power IMMEDIATELY begins to knead ...
sazalexter
Quote: MishaJ
After kneading and warming up a little to rise the dough, the kneading program started again.
Kneads continuously or for a few seconds?
MishaJ
Quote: sazalexter
Kneads continuously or for a few seconds?
All the time.
sazalexter
MishaJ, Bring HP to the service.
Sena
After another jam, a pin flew out, on which a kneading spatula is put on. Once upon a time I already had it, there a spring fell out inside. But this time she floated down the drain. How can this be repaired? The service offers only a new bucket, at a price slightly less than the HP itself. Maybe someone knows how to put it together? I continue to use the stove, only I first mix the dough in a bowl, and then transfer it to a bucket for further kneading, otherwise the water immediately flows out. It also rattles very much during the batch, but it's not scary. I really hope for the collective intelligence!
Thank you in advance.
Whitesnow
Bakeries from Ukraine! Can someone help and send me a bucket of HP to Russia?
sazalexter
Whitesnow, As an option to order here 🔗 that's just comes out expensive. PS specify the HP model
Whitesnow
There is no such bucket. HP delonghi bdm 755s
sazalexter
Whitesnow, Alina, you need to write a letter to Orbis, after prepayment they order, this is the official SC Delongy.
Bucket part number EH1264, DLKWEH1264 request here https://Mcooker-enn.tomathouse.com/s-image/2624/product/1314/ or 🔗 or or
Whitesnow
I have already written to everyone, almost no one has it in stock, and who writes that the reviews about them are bad on pre-order, people pay, and then there is no product or money. Thanks for the advice, I'll write to Orbis.
Whitesnow
Wrote answered from Orbis, there is no bucket and will not be
IgorChe
Good time! I did it for my Bork BM SBA 1062 SI, I lost the ring-shaped piece somewhere, which lies under the bucket on the shaft holder while kneading. In general, the bucket dangles without this ring. Maybe something can be done, please advise? And maybe someone knows how this ring is correctly called, I did not come across any spare parts for HP on any site. Thanks in advance!

All recipes

New recipe

© Mcooker: best recipes.

map of site

We advise you to read:

Selection and operation of bread makers