Electric vegetable cutter

[Niarma]

Niarma, I will not take a picture, because after the appearance of the cartoon I gave the fillet to my friend and now I regret it very much, but you cannot take it back.

So I think - why did I come here !!!
I thought everything! I am tying up with purchases and for a long time! I bought a bear cub and an Orson pressure cooker, I thought that's enough, I don't need anything, but here are graters !!!

In general, in addition to the manual one, (on which I do everything and work), I have a burner, mainly for cabbage I have it. There is a kenwood nozzle with cubes, but I do it! do not use. I don't need it at all, I don't cut anything in such volumes. so nxj cubes are not basic when choosing
So you need to be constantly at hand, not big, for cheese, carrots and for light salads. The mule, as I understood it, is super, and the price has already become more adequate, but it seems to me big? My kitchen is not big, half a slave is already occupied by KM, and Orsons. If I put it in the closet, I will not use it for sure

but it seems big to me?

But no. It is quite compact. It takes up very little space. I'm on the countertop pushed her found a place for her.
Since too

If I put it in the closet, I will not use it for sure

[Gulsine]

but it seems big to me

Gulsine, believe me, she's not big. I saw her live in the store. Very compact
If I had money, I would buy it without hesitation

[Song*]

Song*, Nataliya, Yes??? fine! Now, to decide exactly a mule, or is it possible to consider Phillips too?

[Gulsine]

Now, to decide exactly a mule, or is it possible to consider Phillips too?

Gulsine, here everyone has their own opinion on this matter. Who likes what So, what to choose for you

Niarma, I will not take a picture, because after the appearance of the cartoon I gave the fillet to my friend and now I regret it very much, but you cannot take it back.

Here is one of the opinions.

it's just that many people choose a mule, because cutting into cubes is needed. I don’t. But the convenience of washing and storage captivates. Phillips nozzles should be stored separately?

I only use phillips to grate onions and carrots on the same julienne grater. But still life shows that I mainly use Mule, so it is many times easier to assemble / disassemble and wash it. And I start Phillips only when I work for at least a week, but this rarely happens. And he still scatters vegetables on the table and in general around.
In general, I like how Phillips rubs, but from the thought that now I need to disassemble it, pick it up and wash it, the enthusiasm disappears, I find myself another occupation or chop it by hand)))
I don't use cubes on a mule very often, I use more sticks and a grater with a shredder.

But still life shows that I mainly use Mule, so it is much easier to assemble / disassemble and wash it

Here !!! thank you very much!!!

I find myself another occupation or chop manually)))

what I'm actually doing now is all by hand, rubbing and cutting

By the way, in the internet I found about an onion in a mule

To cut the ONION into cubes, peel the onion, cut it into two halves and load with the cut down.

[GruSha]

GruSha, At one time, or rather a year ago, I also chose between 2 vegetable cutters. Grandmother (Tatiana), having both, advised and recommended to buy both. Having followed her advice, I was never disappointed in this. Both are good and both are needed, a couple of threads duplicate each other, but there are several different threads.

[Vika]

I definitely won't take two, Vika.
There is a berner, I think a lot of things they can cut. From the blanks, I can only chop several kg of carrots and freeze them. All other preparations are made in the village, my equipment is not involved in this, it is resting in the city :)

More about the mule from the reviews on the internet. Since cheese is often rubbed, children love pizza, this moment is important
What do you think?

Particles of cut products fall into the slot for installing nozzles, and there the motor, by the way, is located. The design of the electric grinder does not provide for the ability to remove the upper part in order to remove any debris from the insides. You can fight this only if you are vigilant about the process of cutting products and do not allow contamination of the slot for installing nozzles. It is inconvenient, of course, puzzling and annoying. Especially bad when cheese is rubbing. All the time you remember the designers with an unkind word. As a result, three cheese on another shredder, where the motor is closed.

[GruSha]

GruSha, that's why I don't like the grater, especially when you are rubbing a large amount of something.

I rub cheese on a mule, but I watch constantly, it's not difficult))

[Tanyusha]

Tanyusha, and how much is this? at least approximately? Do you have Phillips?
Elizabeth, turn the basin so that everything falls freely and does not clog?

[Gulsine]

Gulsine, Well, look, which is more convenient for you.
I don’t make any blanks at all, just a little. But I didn't make friends with Burner, so I brought it back from the closet again, I will master it.

turn the basin so that everything falls freely and does not clog?

and also periodically empty the outlet with your hand, especially with viscous products such as cheese.
I'm not friends with Berner either - I'm afraid. I hurt myself badly several times, now I'm afraid

[Vika]

Vika, Berner shreds cabbage perfectly. I am very comfortable, sometimes I can also potatoes for soup. But potatoes are easier for some reason by hand with a knife!

[Elizabeth]

Elizabeth, yeah, got it! And Berner is good, in vain :)

[Gulsine]

Gulsine, Yes, in my opinion I am the only one in the whole world who is not friends with Burner. I will master.

I'm not friends with Berner either - I'm afraid. I hurt myself badly several times, now I'm afraid

Lisa, likewise! So I'm not alone

I rub cheese on a mule, but I watch constantly, it's not difficult))

And I'm constantly rubbing cheese on a mule. The most important thing, as Lisa wrote, is that you need to attach work and clean it from below so that it does not get clogged. And as a preventive measure, after grating the cheese, I clean the gum with ear sticks. Today I did Olivier on a cube, 5 minutes, super. Boiled potatoes from the refrigerator, carrots too. There is practically no waste, and what remains in the cube at the end, I remove the lid and press through with the brush that is included in the kit. After that, wash without problems.
And the fillet is still in the package, so there is no need for it, Mulya is completely satisfied.

[GruSha]

GruSha, I had a Phillips, I loved him very much, because I worked for 12 years, that's for sure and still continues to work, but I got a mule and I gave the phillips to my friend with a fool (I thought why I need 2 graters), and the mule cannot cope with the set task. If you rub a lot (I make carrots for the winter in several passes, I rub 2 kg each), then the mule clogs in front of this, its progress slows down and you have to constantly clean and clog the slot for installing the nozzles. Sorry if I wrote messy.
Here is my Phillips:
🔗

Tanya, well, for 12 years, kanesh, she got used to Fila, he will be better than others in every way!

[Tanyusha]

Tanyusha, Tanya! Is there really no waste from vegetables left in centrifugal graters? According to this principle, all the harvesters used to be, I do not know, I had a mulinex, and it also had to be constantly cleaned of residues. Constantly shooting, disassembling ... and even in the high-speed Kenwood grater the same problems ..
Although, of course, it's a matter of habit ...

in ozone there is a discount of 500 rubles, but only phillips are there. Total Philips HR1388 3200 would have cost.
And the mule in the eldorado 4100.
: girl_cray: what to do ??? what to choose???

[Gulsine]

Gulsine, take two, you can't go wrong
And look here

🔗

no no no!!! I definitely don't need two

[GruSha]

GruSha,
Gul, if this helps you (I have both), then in Phillips I only use a crook grater, for this I take it out, everything else is in the Mule, and it's easier to wash it ...

Every day, depending on what I'm cooking:
Phillips: julienne (for salads, taratora, feta cheese for pies and banitsa), both slicers (for salads), fries (for soups and ratatouille).
Moulinex: graters (carrots, beets, cheese for salads), bars (potatoes for frying), cubes (for many things) ...
Blanks:
Combine harvester
I understand that I am bringing confusion, but this is my experience.

in Phillips I only use a julienne grater, for this I take it out, everything else is in the Mule, and it's easier to wash it ...

PPKS!

[Galina]

Galina, Elizabeth, yeah, ATP :)

Tatyana, why not phillips graters, something you don't like?

Moulinex: graters (carrots, beets, cheese for salads)

[Gulsine]

Gulsine, in Phillips the graters are almost the same as in Moulinex. Moulinex is easier to wash.

[GruSha]

GruSha, Gulsine, order at least something already, and as soon as possible! Long wires - extra tears... It takes a long time to choose ...
Well, you don't take a cow, right word...

[Song*]

Song*, ha! okay everyone, gone

okay everything, gone

Order?

Then at least tell me what you chose ...

It takes a long time to choose ...

I also watch the agony of choice
How familiar is it all

very often you choose to choose, but inside there is something that has already been decided on the choice))) and it turns out that you are looking for confirmation of the correctness of the choice. Doubts to dispel even more!
And then there is silence
I really don't like unnecessary things. I don't like it anywhere, not only in the kitchen! I will give it, sell it, throw it out, but I don't store anything at home

: girl_red: that's why you are already tired of it. No internal signal.

only for this reason you are already tired. No internal signal.

Choi tired of that? You, too, are all tormented and waiting for how it will end

well, maybe someone else will be found with the same agony of choice and will find in your answers the answer to your question
So many thanks to everyone only

It happens that someone chooses for a very long time, but it so happens that he immediately "pokes" and that's it - I want it !, click on the button - and bought it.

GruSha, I, like you, are friends with Burner. In addition to the standard ones, I have all the additional shredding inserts (Trend series). Cubes. on the Mula, in my opinion, are large; I even bought Scarlett, seduced by cubes - there are 6.5 mm cubes, and then I manually cut them smaller and more accurately - in the end I sold them. And I need 7605 just for rubbing, occasionally cutting into slices, although I would not refuse additional attachments. And the reviews about this model are good. And french fries on the Berner turn out smartly and quickly (you don't need a bucket)

with the same agony

I chose Multi (only because of the cubes) ... and already ordered ... but in general I love Berner, I have been using only her since 1993 ...

Girls, found on the Belarusian site 🔗 additional grater inserts for Philips models with a knife holder, though not for fries, but there are for potato pancakes. I think it will work with multi-cutting. But delivery is only in Belarus. Maybe the girls from Belarus will agree to redeem and send ?? !!! Help out !!!

on Mula, in my opinion, they are large;

I agree, her cubes are large, I never cut it with my hands, BUT I won't cut anything with my hands, I'll change the menu better, I have no time.
my mother does not really respect the housewives whose Olivier is coarsely cut, but now she eats my salad and agrees that it is better large and in seconds than small and hand. The mother-in-law can and says what kind of eyes, I do not know, if only she did not cook for her))))))) so I am satisfied with this alignment, but here everyone sets priorities.

I agree, her cubes are large

really big ... I'm in doubt ... whether to redeem a mule !!?

I take it all, Phillips! I don't even need cubes!

I take everything, Phillips

on Avito Philips
🔗
🔗

[GruSha]

GruShaThat's right, Gulechka! I wanted to advise you Philip! Mula has some really big cubes and if you are friends with Burner, he helps you to plan good sticks on frits.