Dumplings and dumplings mold

[Ava11]

Ava11,
Alla, so you bought the Italian ravioli tablet from Markat. I wrote about her a couple of pages in front that I barely got rid of her. I sold for half the price of Slandro (our current OLH). What was a pity to sell was the rolling pin that came with the kit.
We collected such tablets in the joint venture, back in 13-14 years. And everyone who did not take, I do not remember a good response about these molds. The price for them was not small even then, but now it is probably even more so. But it is not worth this price! Why, after these tablets, I reacted with prejudice to similar, Teskomovsky, forms. I thought it was the same bullshit. And only Timkina opened my eyes that Teskomovsky molds are still a worthwhile thing!

honored you, now also in search of the perfect rolling pin)))))

Don't tell me, Irish! So I lived quietly, bought a new rolling pin with a diameter of 4 cm, and soooo it was convenient for me with it, well, I think the zhist was a success.
And now, succumbing to the herd sentiment, I want a rolling pin even thinner and completely without handles.
Tryndets! No quiet life.

I thought it was the same bullshit. And only Timkina opened my eyes that Teskomovsky molds are still a worthwhile thing

Oh, Nel, just the other day we talked about the fact that Teskoma knows how to make her device the most convenient out of hundreds of similar ones. Here literally, it would seem, some little thing will add and everything - the best of the best!
But to be honest, if Teskoma had not made a mold for raviolini for 21 pieces, where the size of the dumplings corresponds to my idea of ​​the ideal, I would not have bought any at all, but still I would be sure that there is nothing better than self-made dumplings and dumplings, and would love to continue to cook them. And you see how it turned out? Now the big mold has been popping up.

Helen, look what kind of rolling, how you want

At Ozone, 21-round molds are on sale again.

Helen, look what kind of rolling, how you want

Is that you for me, Marish? I don't really need a curly knife, I have a dark darkness.
But handsome, scoundrel.

This knife has a flat wheel and can be used to roll narrow spaces.

Aaaaaaaaaaaa! MAOOOOO !!! Wake-wake-wake!

Fsem stand! Nobody move! Assure your hands! Schaub, I saw that you don't press "Order".

Damn, the price, the infection - draconian.
I’m probably going to use a rolling pin for now, otherwise the fly itself will roll me with this knife, up and down.

And now, succumbing to the herd sentiment, I want a rolling pin even thinner and completely without handles.

Lenchik, so I just ordered a 50x4 cm rolling pin, just like you)))) with handles)))) and also looking for a thin one))))) well, so that it is very thin. I want two, longer and shorter, each edge has its own rolling pin)))))))))))
suddenly you find the ideal - let me know)))))))))

So far I ordered a 30x3 cm rolling pin without handles in a galamart. Girls, thanks a lot for the link. Now you can sleep well))) until tomorrow))))))

[Marina]

Take it right away with a margin

Isesna! ... Then I'll start trading - I'll get rich, I'll sew a suit with ebb and flow to Yalta!

Marina, I read my thoughts straight! I'm here, risking getting it in the neck for hanging out at night, already galloping around the apartment, in search of ... something from which you can cook up a similar video.
And yesterday I was running around in search of some small and not very necessary frame for embroidery, hoping to tear off one roller from it and make a thin rolling pin out of it. She clinked glasses, damn it!

Girls, thanks a lot for the link.

And meeee ?!



I already found

Lenochka, Marish))))))))) Well, you))))))))))) I just figured out that a long rolling pin without handles can be replaced with a white plastic pipe, well, which are still installed in the bathroom and kitchen for water ))))) I just don’t know how safe it is to use it with products))))))))))))) Now what is the handle of the new rolling pin to saw off and make a thin roller for seams out of it?)))) ))))) Now I want such a roller, it is faster for them)))))))))))))) The main thing is to aim precisely so that you do not zigzag along the ribs of the Teskomovskaya shape))) That's it, I sleep while you still haven't come up with anything))))))))))))

Here you can see the fasteners, and take the handle from the opener

Marish, I want a roller. But for me, I would have a wheel wider, at least 1 cm. We need to think about your idea. Thank you.

But for me, I would have a wheel wider, at least 1 cm

I thought about that too. Moreover, the roller itself should not be metal, ideally made of dense silicone. Oh, I'm already tired of thinking about it. And why doesn't my rolling pin suit me? I'm sitting on the bullshit.

Do you know what I thought?
Girls who have two small or large shapes at once, no matter round or square - their cutters are equally square. Look, what if you put the yellow cutter from the second mold upside down on the dough and press it down? Will cut through?
Can you imagine how steep and cooking speed it would be? And no rolling pins!

who has two small or large shapes at once, no matter round or square

Leeyen, I don’t understand You have no second form or haven’t received it yet

And also, while I was sleeping, Timon ordered a large square mold!

A rolling pin can be made from a wheel from a model car. Find it in a store, or buy an inexpensive machine, remove the wheel from it, and fix it on a piece of wire.

or take a wheel from a children's car of the right size.

Damn, I thought one was so brilliant

I called this ro-tools dot ru to which the link was given above. The man says that there are silicone rollers 3 cm, 4 and 8 cm in diameter for all 2.5 cm, he says that they are durable if you roll on a dumpling machine, but he is not sure what can be used for cooking, since there are no marks and certificates for this using.

I ordered a 50 cm rolling pin on Ozone, although it has handles, it is all solid. And inexpensive, I think.

🔗

Damn, the price, the infection - draconian.
I’ll probably use a rolling pin for now, otherwise the fly will roll me along with this knife, up and down.

Linen, too narrow a wheel - you will try to hit exactly the seam. Therefore, I talked about a roller 2-3 cm wide, but there are none: either a rolling pin or a cutter.

[Elena Tim]

Elena Tim, Len, and what kind of raviolnitsa Teskomovskaya is so wonderful? Please give me a link!

This is where the next discussion of these forms started. The form for the ravioli Tescoma delicia is called
Dumplings and dumplings mold # 1790

[Lenusik]

And, by the way, they didn’t show that the Schaub Raviolki separated from each other, as in our Teskomochka-gopher-sun. No, we won't take it, please?

Lenusik Thank you for the video. Correctly she said no need to buy such, for this she showed that other money would not be wasted, we will definitely find what we still need !!!
And the story began with the fact that a bright thought came to your head that you need a separate rolling pin for Teskomovskaya!
Nila Nelechka, no, my not marcato, sorry I didn’t see your post, mine is an unknown Chinese "author" and without a plastic palette on top. True, there is a wooden rolling pin, so I really liked it, I'll take a picture if anyone is interested.
Virgin, I thought, what if we need a metal rolling pin? I saw on sale but a thick roller probably d- 8 or 10 cm. Tell me to start wanting or waiting.

Ha, I have a rolling pin - all rolling pins have a rolling pin !!! Diameter 2.5 cm and length 33 cm !!! Toshodoktor registered! I love her madly !!!
But there is a small BUT - I do not have dumplings. And I don’t want to.

see what kind of rolling, how you want

I have just one. He's very cool. Cuts perfect, for me.

[Nata]

Linen, too narrow a wheel - you will try to hit exactly the seam. Therefore, I talked about a roller 2-3 cm wide, but there are none: either a rolling pin or a cutter.

Nata, they do not need a seam while the dough is in the cells. He pressed it with his fingers, turned the palette, and rolled it with a cutter at the seams. I showed above how I do it. Since I often do not eat immediately, but freeze it, it is very convenient for me.

Diameter 2.5 cm and length 33 cm !!!

Who's got it better than la femme, and we got it like a rolling pin

Girls, I seem to have found in which direction to look in relation to the rolling pins. I started with Indian for chapatis, but they are like a thin spindle ... I got to the Turkish ones - they are !!! The Turks call such oklava rolling pins, up to 2 cm in diameter (1., and the length can be varied ...



I will look for ...

[Nataliya]

Nataliya, you know, I'm never sick))))) And to buy, the shob was lying around and forgotten, so it's not about me. Yes, and I cook dumplings 2-3 times a year, I was not strained with ruts, and there are sovetsky dumplings and dumplings.

[svetta]

I am never sick

Eh, you're lucky svetta.

[Nataliya]

Nataliya, I was cured once and for all by a submersible pancake maker!)))))

[Cifra]

Cifra,

I did not get that. That is, you do not push the seams on the palette, but simply turn it over with the whole "plate" and then you simply cut it with a cutter. Yes? Right? And what then a good ordinary cutter did not please? Which is not just for dough, but for ravioli. It not only cuts, but precisely seals. At least from the same Tescoma.

I2vMGOcKrc0

I have more powerful, metallic kuhenprofi

[Nata]

Nata, I don’t know, actually. I just walked in the opposite direction - first I bought molds for ravioli, and then, not very connected with this, a Markatovsky knife. Well, then she combined one with the other in an attempt to overcome small raviolini.
And I also love when everything is even, but my eye is so-so. Just a knife, no shape, I have some freaks out

[Cifra]

Cifra,

Is Markatovsky also connecting? In a sense that not only cuts, but seals. Because I realized that it was aesthetically pleasing to cut through the palette smoother and clearer, I wanted to emphasize the knife. What to take connecting, not curly cutting for the test.
I also do not like it just with the knife itself on the table - the identity is not very beautiful and not very even.

Is Markatovsky also connecting?

No, Markov's simple. But the ravioli don't stick to it anyway. Even when the small stuffing is closer to the edge, everything is still sticking together normally. The seam is smooth. The size of the zigzags in one of the wheels exactly matches the step of the same zigzag on the Tescom palette. Therefore, it looks aesthetically pleasing.

who has two small or large shapes at once, no matter round or square

At least the second, or rather a couple, order ... Well, Lenk ..., you will always come up with something ...

yes, they are small-scale raviolini ... the last we make a Tupper dumpling maker for three pieces and the same type of cheburechnitsa and minced meat and dough go off at a stroke and cook 4 pieces and burst into pieces I don’t get the Soviet hexagon and IDeA together with it

tapper dumplings for three pieces

Well it finally can
The fastest
But my son said
- mother, and to savor ... I ate and did not feel ... Do it smaller!

what I didn’t understand You have no second form or haven’t received yet

So I have one small and one big, but you need two identical ones. It doesn't matter what kind of white bases they have, round or square, the main thing is that the yellow cutters will be the same "square" size.

At least the second, or rather a couple, order ... Well, Lenk ..., you will always come up with something ...

Here is Lyol, me and Gru, if Teskoma were as brash as me, she would have come up with a palette not of two, but of three components long ago: two - like Wait, plus a third, upper "press-cutter". I put it on the ravioli, pressed it - rrraz and all the raviolki were cut, I don't want to dump it.And no rolling pins.

I put it on the ravioli, pressed it - rrraz and all the raviolki were cut, I don't want to dump it. And no rolling pins

I will check, but closer to night

[Cifra]

Cifra, Lenuuusk, and Lenuusk! You have all four!
Try, connect two cutters with their muzzles to each other - will the "zigzags" coincide there? Do you think the dough will be cut this way?

And, you already answered, but I sent it without looking)))

aha-aha, I am now thirty kilometers from them, but closer to the night - be sure
The miracle of engineering should not be lost))

I came up with a palette not of two, but of three components: two - like Wait, plus a third, upper "press-cutter".

Flax, patent the idea quickly before Tescoma licks the idea

And no rolling pins.

Yeah and the price of this form will immediately become like a wing from a Boeing

aha-aha, I am now thirty kilometers from them, but closer to the night - be sure
The miracle of engineering should not be lost))

And de et it wears, panima ?! What is it for yourself, drooling?
Here, one might say, genius rushing from all the cracks, and, you see, it was carried away from the explosion in science 30 km away

Yeah and the price of this form will immediately become like a wing from a Boeing

Duc there will be plastic there, well ... like, it will (they didn't think of it, but I just told you so far)))
Now, if Marcato comes up with such a thing, yes, from metal, then, yes, they will crush tens of thousands.
I started to dislike them slowly

yes, they are small-scale raviolini ... the last we make a Tupper dumpling maker for three pieces and the same type of cheburechnitsa and minced meat and dough go off at a stroke and cook 4 pieces and burst into pieces I don’t get the Soviet hexagon and IDeA together with it

The same nonsense. I shake the current for the smallest family member.))

[Scarecrow]

Scarecrow, well, we have all the finishers are already not small, so there is no one to grind

🔗

and such, will it fit?

by the way, Alevtina told about the PP pipe cut, she successfully uses

I get in ... in Leroy Merlin there are rubber rollers 3-4 cm in size, if that the barrel itself can be tightened with cling film if someone is afraid to touch the food

[Brown-eyed]

Brown-eyed,

In! That's what you need, thanks!

🔗

and such, will it fit?

No, Len, she is too thick - 6 cm in diameter. And you need, ideally, three or three and a half.

there are rubber rollers 3-4 cm in size

So we only need a centimeter of width. There, these 3-4 cm will not be crammed across there. And if you lay it along, like a regular rolling pin, then an ordinary rolling pin is more convenient. Although...
No, I won't go to Leroy.

[Brown-eyed]

Brown-eyed,

In! That's what you need, thanks!

They are rubber plump, and cost a penny, in the range of 100-150, depending on the company

No, I won't go to Leroy

It's a pity. Here they are there in Leroy would be surprised by the raids from HP

No, I won't go to Leroy.

We need to send some kind person with HP, he would buy for his comrades